Engineering Papers⌕ Search

Engineering topics

Ma, S.

Publications and source records attributed to Ma, S..

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Influence of regional nighttime atmospheric regimes on canopy turbulence and gradients at a closed and open forest in mountain-valley terrain

Stable stratification of the nocturnal lower boundary layer inhibits convective turbulence, such that turbulent vertical transfer of ecosystem carbon dioxide (CO 2 ), water vapor (H 2 O) and energy is driven by mechanically forced turbulence, either from frictional forces near the ground or top of a plant canopy, or from shear generated aloft. The significance of this last source of turbulence on canopy flow characteristics in a closed and open forest canopy is addressed in this paper. We present micrometeorological observations of the lower boundary layer and canopy air space collected on nearly 200 nights using a combination of atmospheric laser detection and ranging (lidar), eddy covariance (EC), and tower profiling instrumentation. Two AmeriFlux/Fluxnet sites in mountain-valley terrain in the Western U.S. are investigated: Wind River, a tall, dense conifer canopy, and Tonzi Ranch, a short, open oak canopy. On roughly 40% of nights lidar detected down-valley or downslope flows above the canopy at both sites. Nights with intermittent strong bursts of “top-down” forced turbulence were also observed above both canopies. The strongest of these bursts increased sub-canopy turbulence and reduced canopy virtual potential temperature (θv) gradient at Tonzi, but did not appear to change the flow characteristics within the dense Wind River canopy. At Tonzi we observed other times when high turbulence (via friction velocity, u*) was found just above the trees, yet CO2 and θv gradients remained large and suggested flow decoupling. These events were triggered by regional downslope flow. Lastly, a set of turbulence parameters is evaluated for estimating canopy turbulence mixing strength. The relationship between turbulence parameters and canopy θv gradients was found to be complex, although better agreement between the canopy θv gradient and turbulence was found for parameters based on the standard deviation of vertical velocity, or ratios of 3-D turbulence to mean flow, than for u*. These findings add evidence that the relationship between canopy turbulence, static stability, and canopy mixing is far from straightforward even within an open canopy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Investigation of a microporous iron( III ) porphyrin framework derived cathode catalyst in PEM fuel cells

In Polymer Electrolyte Membrane Fuel Cells (PEMFCs) the thickness, structure and morphology of the electrode layer play an important role in the cell performance. This effect becomes particularly significant when the cathode catalyst is based on a non-precious metal due to the higher catalyst loadings required to compensate for the lower catalytic activity when compared to Pt based catalysts. In this study, an iron( III ) porphyrin framework material was synthesized and pyrolyzed and its catalytic activity towards the oxygen reduction reaction (ORR) was evaluated using rotating disk electrode (RDE) experiments and single cell testing. Single cell performance was evaluated as a function of the electrode catalyst loading (electrode thickness) and oxygen partial pressure. As expected, the ORR kinetic overpotential was the major contributor to the overall voltage loss. However, the mass transport contribution to the voltage loss became more prominent with small increases in the cathode catalyst loading. Finally, the observed performance is discussed in the context of structure and morphology of the catalyst layer (CL), analyzed through scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Enhancing the reactivity of gold: Nanostructured Au(111) adsorbs CO

Low-coordinated sites are surface defects whose presence can transform a surface of inert or noble metal such as Au into an active catalyst. We prepared gold surfaces modified by pits, starting with a well-ordered Au(111) surface; we then used microscopy (STM) for their structural characterization and CO spectroscopy (IRAS and NEXAFS) for probing reactivity of surface defects. In contrast to the Au(111) surface CO adsorbs readily on the pitted surfaces bonding to low-coordinated sites identified as step atoms forming {111} and {100} microfacets. Finally, pitted nanostructured surfaces can serve as interesting and easily prepared models of catalytic surfaces with defined defects that offer an attractive alternative to vicinal surfaces or nanoparticles commonly employed in catalysis science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Stabilizing a magnetic vortex/antivortex array in single crystalline Fe/Ag(001) microstructures

While a magnetic antivortex state can be created in ring structures, much effort has been devoted to stabilizing a magnetic antivortex as the ground state in a single island. Among many proposals, less attention has been paid to the role of magnetocrystalline anisotropy because most magnetic microstructures are made of polycrystalline materials. By patterning epitaxial Fe/Ag(001) films along different in-plane directions, we show that the Fe magnetocrystalline anisotropy plays a very important role in stabilizing different types of vortex/antivortex states. In particular, we find that an Fe island in the shape of an elongated hexagon favors vortex array formation when the long edge is parallel to the Fe easy magnetization axis, and favors the vortex-antivortex array formation when the long edge is parallel to the Fe hard magnetization axis. © 2014 AIP Publishing LLC.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Growth process and magnetic properties of α-FeSe nanostructures

Growth process and magnetic properties of PbO-type α-Fe{sub x}Se nanostructures with shape changing from nanocacti to nanopetals and then to nanosheets are investigated. With iron acetylacetonate [Fe(acac){sub 3}] and Se powder as raw materials, the diffusion process of Fe atoms dominates the synthesis of α-Fe{sub x}Se nanocacti following phase transitions from FeSe{sub 2} to Fe{sub 3}Se{sub 4} and finally to α-Fe{sub x}Se. When a mixed solution containing Se precursor and Fe(acac){sub 3} was used as the raw material, the formation of FeSe{sub 2} and Fe{sub 3}Se{sub 4} can be avoided and, bended α-Fe{sub x}Se nanopetals can be prepared at 345 °C, which became flat nanosheets with a [001] preferred orientation as extending the reaction time from 1 to 4 h. No superconducting transition occurs in the α-Fe{sub x}Se (0.84 ≤ x ≤ 1.05) nanostructures due to composition heterogeneity or size effect. Magnetic measurements indicate that an antiferromagnetic component with a Néel point at about 45 K dominates the magnetic properties of the α-Fe{sub 0.87}Se nanosheets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Imprinting antivortex states from ferromagnetic Fe into antiferromagnetic NiO in epitaxial NiO/Fe/Ag(001) microstructures

Magnetic vortex and antivortex are the two basic topological states in magnetic systems. While the ferromagnetic (FM) vortex state can be formed spontaneously and be imprinted into an antiferromagnetic (AFM) layer in AFM/FM disks, the antivortex state has never been realized in AFM films. By fabricating single crystalline NiO/Fe/Ag(001) microstructures, we show that the magnetic antivortex state can be created in the Fe microstructures and imprinted into the AFM NiO layer.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Acceleration of electrons and ions by strong lower-hybrid turbulence in solar flares

One of the outstanding problems in solar flare theory is how to explain the 10-20 keV and greater hard x-ray emissions by a thick target bremsstrahlung model. The model requires the acceleration mechanism to accelerate approximately 10(exp 35) electrons sec(exp -l) with comparable energies, without producing a large return current which persists for long time scales after the beam ceases to exist due to Lenz's law, thereby, producing a self-magnetic field of order a few mega-Gauss. In this paper, we investigate particle acceleration resulting from the relaxation of unstable ion ring distributions, producing strong wave activity at the lower hybrid frequency. It is shown that strong lower hybrid wave turbulence collapses in configuration space producing density cavities containing intense electrostatic lower hybrid wave activity. The collapse of these intense nonlinear wave packets saturate by particle acceleration producing energetic electron and ion tails. There are several mechanisms whereby unstable ion distributions could be formed in the solar atmosphere, including reflection at perpendicular shocks, tearing modes, and loss cone depletion. Numerical simulations of ion ring relaxation processes, obtained using a 2 1/2-D fully electromagnetic, relativistic particle in cell code are discussed. We apply the results to the problem of explaining energetic particle production in solar flares. The results show the simultaneous acceleration of both electrons and ions to very high energies: electrons are accelerated to energies in the range 10-500 keV, while ions are accelerated to energies of the order of MeVs, giving rise to x-ray emission and gamma-ray emission respectively. Our simulations also show wave generation at the electron cyclotron frequency. We suggest that these waves are the solar millisecond radio spikes. The strong turbulence collapse process leads to a highly filamented plasma producing many localized regions for particle acceleration and resulting in approximately 10(exp 17) electron 'beamlets' of width approximately equal to 10 lambda sub De which eliminates the production of large magnetic fields. In this paper, we demonstrate that the model produces an energetic electron spectrum with the right flux to account for the hard x-ray observations.

Spicer, D. S.↗
NASA NTRS1985

Streaming-Potential Studies

Apparatus and experimental technique based on measurements of streaming potentials evaluates effects of surface coatings for reducing or eliminating electro-osmotic flow.

Gregonis, D.↗