Engineering Papers⌕ Search

Engineering topics

Ma, Rui

Publications and source records attributed to Ma, Rui.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Review: Safe and sustainable groundwater supply in China

Exploitation of groundwater has greatly increased since the 1970s to meet the increased water demand due to fast economic development in China. Correspondingly, the regional groundwater level has declined substantially in many areas of China. Water sources are scarce in northern and northwestern China, and the anthropogenic pollution of groundwater has worsened the situation. Groundwater containing high concentrations of geogenic arsenic, fluoride, iodine, and salinity is widely distributed across China, which has negatively affected safe supply of water for drinking and other purposes. In addition to anthropogenic contamination, the interactions between surface water and groundwater, including seawater intrusion, have caused deterioration of groundwater quality. The ecosystem and geo-environment have been severely affected by the depletion of groundwater resources. Land subsidence due to excessive groundwater withdrawal has been observed in more than 50 cities in China, with a maximum accumulated subsidence of 2–3 m. Groundwater-dependent ecosystems are being degraded due to changes in the water table or poor groundwater quality. This paper reviews these changes in China, which have occurred under the impact of rapid economic development. The effects of economic growth on groundwater systems should be monitored, understood and predicted to better protect and manage groundwater resources for the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Study on the effects of catalysts on the immobilization efficiency and mechanism of heavy metals during the microwave pyrolysis of sludge

Highlights: • CaO was more conducive to the efficient immobilization of heavy metals than Fe{sub 2}O{sub 3}. • The leaching concentration of Pb decreased by nearly 95% when catalyzed by CaO. • CaO was prior to reduce the ecological risk of Cr, Cu, Zn, Pb, Ni while Fe{sub 2}O{sub 3} for Cd. • Co-functions of porosity and co-crystal determined the immobilization of heavy metals. - Abstract: In order to enhance the immobilization of heavy metals in the bio-char during microwave pyrolysis, the immobilization efficiency and mechanism of heavy metals in the microwave pyrolysis of sludge with different alkaline catalysts were explored. Results showed that the leaching concentrations of heavy metals reduced greatly after pyrolysis, which were lower when catalyzed by CaO than those of Fe{sub 2}O{sub 3}. CaO was more favorable for the immobilization of Cr, Cu, Zn, Pb and Ni while Fe{sub 2}O{sub 3} was more favorable for Cd. Different species distributions of heavy metals in the bio-char affected the leaching concentrations. Adding catalyst could significantly reduce the ecological risks of heavy metals in the bio-char, and CaO (RI = 15.17–20.43) had a better performance than Fe{sub 2}O{sub 3} (RI = 16.88–21.79). When catalyzed by CaO, the formation of pores and co-crystal compounds in the bio-char determined the immobilization efficiencies of heavy metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

A link-node reformulation of ridesharing user equilibrium with network design

Though the conventional network design is extensively studied, the network design problem for ridesharing, in particular, the deployment of high-occupancy toll (HOT) lanes, remains understudied. Here this paper focuses on one type of network design problem as to whether existing roads should be retrofit into HOT lanes. It is a continuous bi-level mathematical program with equilibrium constraints. The lower level problem is ridesharing user equilibrium (RUE). To reduce the problem size and facilitate computation, we reformulate RUE in the link-node representation. Then we extend the RUE framework to accommodate the presence of HOT lanes and tolls. Algorithms are briefly discussed and numerical examples are illustrated on the Braess network and the Sioux Falls network, respectively. Results show that carefully selecting the deployment of HOT lanes can improve the overall system travel time.

42 ENGINEERING↗
DOE OSTI2018

Adiabatic Shear Localization and Microstructure in Ultrafine Grained Aluminum Alloy at Cryogenic Temperature

Adiabatic shear localization plays an important role in the deformation and failure of ultrafine grained 6061 aluminum alloy processed by friction stir processing. To understand the effects of temperature and strain on adiabatic shear localization in the ultrafine grained 6061 aluminum alloy, it has been investigated dynamic mechanical behavior of ultrafine grained 6061 aluminum alloy under the controlled shock loading experiments. Deformation characteristics and microstructures in the shear band were performed by optical microscopy and transmission electron microscopy. The shear band in the ultrafine grained aluminum alloy is a long and straight band distinguished from the matrix. The width of the shear band decreases with increasing nominal strain. The results show that the grains in the boundary of the shear band are highly elongated along the shear direction and form the elongated cell structures (0.2 μ in width), and the core of the shear band consists of a number of recrystallized equiaxed grains 0.2-0.3 μ in diameters and the second phases distribute in both the boundary and the inner of the equiaxed new grains. The calculated temperature in the shear band is about 692 K. Rotational dynamic recrystallization mechanism is responsible for the formation of the microstructure in the shear band.

36 MATERIALS SCIENCE↗
DOE OSTI2017

miR-214 down-regulates ARL2 and suppresses growth and invasion of cervical cancer cells

Increasing evidence has shown that miRNAs are implicated in carcinogenesis and can function as oncogenes or tumor suppressor genes in human cancers. In this study, we confirmed that miR-214 is frequently down-regulated in cervical cancer compared with normal cervical tissues. Ectopic expression of miR-214 suppressed proliferation, migration and invasion of HeLa and C33A cervical cancer cells. Bioinformatics analysis revealed that ADP ribosylation factor like 2 (ARL2) was a potential target of miR-214 and was remarkably up-regulated in cervical cancer. Knockdown of ARL2 markedly inhibited cervical cancer cell proliferation, migration and invasion, similarly to over-expression of miR-214, indicating that ARL2 may function as an oncogene in cervical cancer. In conclusion, our study revealed that miR-214 acts as a tumor suppressor via inhibiting proliferation, migration and invasion of cervical cancer cells through targeting ARL2, and that both miR-214 and ARL2 may serve as prognostic or therapeutic targets for cervical cancer. - Highlights: • miR-214 targets ARL2. • ARL2 maybe an oncogene in cervical cancer. • ARL2 rescues miR-214.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Integration of Methane Steam Reforming and Water Gas Shift Reaction in a Pd/Au/Pd-Based Catalytic Membrane Reactor for Process Intensification

Palladium-based catalytic membrane reactors (CMRs) effectively remove H2 to induce higher conversions in methane steam reforming (MSR) and water-gas-shift reactions (WGS). Within such a context, this work evaluates the technical performance of a novel CMR, which utilizes two catalysts in series, rather than one. In the process system under consideration, the first catalyst, confined within the shell side of the reactor, reforms methane with water yielding H2, CO and CO2. After reforming is completed, a second catalyst, positioned in series, reacts with CO and water through the WGS reaction yielding pure H2O, CO2 and H2. A tubular composite asymmetric Pd/Au/Pd membrane is situated throughout the reactor to continuously remove the produced H2 and induce higher methane and CO conversions while yielding ultrapure H2 and compressed CO2 ready for dehydration. Experimental results involving (i) a conventional packed bed reactor packed (PBR) for MSR, (ii) a PBR with five layers of two catalysts in series and (iii) a CMR with two layers of two catalysts in series are comparatively assessed and thoroughly characterized. Furthermore, a comprehensive 2D computational fluid dynamics (CFD) model was developed to explore further the features of the proposed configuration. The reaction was studied at different process intensification-relevant conditions, such as space velocities, temperatures, pressures and initial feed gas composition. Finally, it is demonstrated that the above CMR module, which was operated for 600 h, displays quite high H2 permeance and purity, high CH4 conversion levels and reduced CO yields.

water-gas-shift reaction↗
DOE OSTI2014

Assessment of Controlling Processes for Field-Scale Uranium Reactive Transport under Highly Transient Flow Conditions

This paper presents the results of a comprehensive model-based analysis of a uranium tracer test conducted at the U.S Department of Energy Hanford 300 Area (300A) IFRC site. A three-dimensional multi-component reactive transport model was employed to assess the key factors and processes that control the field-scale uranium reactive transport. Taking into consideration of relevant physical and chemical processes, the selected conceptual/numerical model replicates the spatial and temporal variations of the observed U(VI) concentrations reasonably well in spite of the highly complex field conditions. A sensitivity analysis was performed to interrogate the relative importance of various processes and factors for reactive transport of U(VI) at the field-scale. The results indicate that multi-rate U(VI) sorption/desorption, U(VI) surface complexation reactions, and initial U(VI) concentrations were the most important processes and factors controlling U(VI) migration. On the other hand, cation exchange reactions, the choice of the surface complexation model, and dual-domain mass transfer processes, which were previously identified to be important in laboratory experiments, played less important roles under the field-scale experimental condition at the 300A site. However, the model simulations also revealed that the groundwater chemistry was relatively stable during the uranium tracer experiment and therefore presumably not dynamic enough to appropriately assess the effects of ion exchange reaction and the choice of surface complexation models on U(VI) sorption and desorption. Furthermore, it also showed that the field experimental duration (16 days) was not sufficiently long to precisely assess the role of a majority of the sorption sites that were accessed by slow kinetic processes within the dual domain model. The sensitivity analysis revealed the crucial role of the intraborehole flow that occurred within the long-screened monitoring wells and thus significantly affected both field-scale measurements and simulated U(VI) concentrations as a combined effect of aquifer heterogeneity and highly dynamic flow conditions. Overall, this study, which provides one of the few detailed and highly data-constrained uranium transport simulations, highlights the difference in controlling processes between laboratory and field scale that prevent a simple direct upscaling of laboratory-scale models.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2014

Influence of calcite on uranium(VI) reactive transport in the groundwater–river mixing zone

Calcite is an important mineral that can affect uranyl reactive transport in subsurface sediments. This study investigated the distribution of calcite and its influence on uranyl adsorption and reactive transport in the groundwater-river mixing zone at US Hanford 300A, Washington State. Simulations using a 2D reactive transport model under field-relevant hydrogeochemical conditions revealed a complex distribution of calcite concentration as a result of dynamic groundwater-river interactions. The calcite concentration distribution in turn affected the spatial and temporal changes in aqueous carbonate, calcium, and pH, which subsequently influenced U(VI) mobility and discharge rates into the river. The results implied that calcite distribution and its concentration dynamics is an important consideration for field characterization, monitoring, and reactive transport prediction.

calcite, surface complexation, uranium, reactive t↗
DOE OSTI2013

Multifunctional Epidermal Electronics Printed Directly onto the Skin

Materials and designs are presented for electronics and sensors that can be conformally and robustly integrated onto the surface of the skin. A multifunctional device of this type can record various physiological signals relevant to health and wellness. Furthermore, this class of technology offers capabilities in biocompatible, non-invasive measurement that lie beyond those available with conventional, point-contact electrode interfaces to the skin.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Groundwater Impacts of Radioactive Wastes and Associated Environmental Modeling Assessment

This article provides a review of the major sources of radioactive wastes and their impacts on groundwater contamination. The review discusses the major biogeochemical processes that control the transport and fate of radionuclide contaminants in groundwater, and describe the evolution of mathematical models designed to simulate and assess the transport and transformation of radionuclides in groundwater.

radionuclide wastes, fate and transport, modeling,↗
DOE OSTI2012

Utility of Bromide and Heat Tracers for Aquifer Characterization Affected by Highly Transient Flow Conditions

A tracer test using both bromide and heat tracers conducted at the Integrated Field Research Challenge site in Hanford 300 Area (300A), Washington, provided an instrument for evaluating the utility of bromide and heat tracers for aquifer characterization. The bromide tracer data were critical to improving the calibration of the flow model complicated by the highly dynamic nature of the flow field. However, most bromide concentrations were obtained from fully screened observation wells, lacking depth-specific resolution for vertical characterization. On the other hand, depth-specific temperature data were relatively simple and inexpensive to acquire. However, temperature-driven fluid density effects influenced heat plume movement. Moreover, the temperature data contained “noise” caused by heating during fluid injection and sampling events. Using the hydraulic conductivity distribution obtained from the calibration of the bromide transport model, the temperature depth profiles and arrival times of temperature peaks simulated by the heat transport model were in reasonable agreement with observations. This suggested that heat can be used as a cost-effective proxy for solute tracers for calibration of the hydraulic conductivity distribution, especially in the vertical direction. However, a heat tracer test must be carefully designed and executed to minimize fluid density effects and sources of noise in temperature data. A sensitivity analysis also revealed that heat transport was most sensitive to hydraulic conductivity and porosity, less sensitive to thermal distribution factor, and least sensitive to thermal dispersion and heat conduction. This indicated that the hydraulic conductivity remains the primary calibration parameter for heat transport.

Ma, Rui↗