Engineering Papers⌕ Search

Engineering topics

Lynd, Nathaniel A.

Publications and source records attributed to Lynd, Nathaniel A..

At least 19 records

Chain extension epoxide polymerization to well‐defined block polymers using a N‐Al Lewis pair catalyst

Block polyethers comprised of poly(propylene oxide) (PPO) and poly(ethylene oxide) (PEG or PEO) segments form the basis of ABA-type PEO-b-PPO-b-PEO poloxamer materials. The inverse architecture with an internal hydrophilic PEO segment flanked by hydrophobic blocks can be difficult to prepare with control of architecture by use of traditional anionic polymerization. These oxyanionic polymerizations are plagued by chain-transfer-to-monomer side reactions that occur with substituted epoxides such as propylene oxide (PO). Herein, we report a new method for the preparation of block polymers through a controlled polymerization involving a N-Al Lewis adduct catalyst and an aluminum alkoxide macroinitiator. The Lewis pair catalyst was able to chain-extend commercial PEO macroinitiators to prepare di-, tri-, and pentablock polyethers with low dispersity and reasonable monomer tolerance. Chain extension was confirmed using size exclusion chromatography and diffusion ordered nuclear magnetic resonance spectroscopy. In conclusion, the resulting block polymers were additionally analyzed with small-angle X-ray scattering to correlate the morphology to molecular architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Boric acid removal with polyol-functionalized polyether membranes

Poor selectivity of conventional desalination membranes for boron often necessitates multi-stage treatment trains to achieve desired boron removal for end uses such as irrigation. One approach to membrane design for improved single-pass boric acid removal is via incorporation of chelating ligands that selectively sorb boron. In this study, membranes based on epoxy-amine cross-linked poly(glycidyl glycidyl ether) (PGGE) were synthesized and functionalized with N-methyl-d-glucamine (NMDG), a polyol known to interact selectively with boron. PGGE and PGGE-NMDG membranes exhibited boron sorption isotherms that were well-described by dual mode isotherms. PGGE-NMDG sorbed 2.5 mmol B/g dry polymer from a neutral aqueous solution containing 100 mmol B/L, which was almost three times the adsorption density of a commercial boron selective resin, Amberlite IRA743. Further, the membranes were regenerated in acid without a significant loss of boron sorption capacity over four cycles. Interactions between boron and NMDG and PGGE sites (e.g., epoxides) impacted boron diffusion in both membranes. The use of ligand functionalized membranes to capture target solutes such as boron requires high loading of interacting sites to maximize uptake capacity. Establishing fundamental structure/property rules for boron selectivity could lead to new material designs with improved boron separation properties for water purification.

36 MATERIALS SCIENCE↗

Impact of Hydration and Sulfonation on the Morphology and Ionic Conductivity of Sulfonated Poly(phenylene) Proton Exchange Membranes

Multiple computational and experimental techniques are used here to understand the nanoscale morphology and water/proton transport properties in a series of sulfonated Diels–Alder poly(phenylene) (SDAPP) membranes over a wide range of temperature, hydration, and sulfonation conditions. New synthetic methods allow us to sulfonate the SDAPP membranes to much higher ion exchange capacity levels than has been previously possible. Nanoscale phase separation between the hydrophobic polymer backbone and the hydrophilic water/sulfonic acid groups was observed for all membranes studied. We find good agreement between structure factors calculated from atomistic molecular dynamics (MD) simulations and those measured by X-ray scattering. With increasing hydration, the scattering ionomer peak in SDAPP is found to decrease in intensity. This intensity decrease is shown to be due to a reduction of scattering contrast between the water and polymer and is not indicative of any loss of nanoscale phase separation. Both MD simulations and density functional theory (DFT) calculations show that as hydration levels are increased, the nanostructure morphology in SDAPP evolves from isolated ionic domains to fully percolated water networks containing progressively weaker hydrogen bond strengths. The conductivity of the membranes is measured by electrical impedance spectroscopy and the equivalent proton conductivity calculated from pulsed-field-gradient (PFG) NMR diffusometry measurements of the hydration waters. Comparison of the measured and calculated conductivity reveals that in SDAPP the proton conduction mechanism evolves from being dominated by vehicular transport at low hydration and sulfonation levels to including a significant contribution from the Grötthuss mechanism (also known as structural diffusion) at higher hydration and sulfonation levels. The observed increase in conductivity reflects the impact that changing hydration and sulfonation have on the morphology and hydrogen bond network and ultimately on the membrane performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling the polysulfide diffusion in lithium-sulfur batteries with a polymer membrane with intrinsic nanoporosity

Polysulfide-shuttle has been a critical concern for the advancement of lithium-sulfur (Li-S) batteries. Celgard membranes that are generally used in Li-S batteries exhibit a porous structure with a pore dimension generally on the micrometer scale. During cell operation, soluble lithium polysulfide species can easily migrate from the cathode through the porous separator and react with the lithium-metal anode. Such an unexpected chemical reaction induces a cascade of negative effects on the overall performance of Li-S batteries. Use of ion-selective membranes with reduced pore size provides a promising approach to suppress the migration of polysulfide species. In this study, a membrane based on a polymer with intrinsic nanoporosity (PIN) with a pore size of < 1.0 nm is explored as a separator in Li-S batteries to mitigate the polysulfide-shuttle problem. The PIN membrane exhibits a unique structure with pore dimensions of less than 1.0 nm, which allows the transport of Li-ions, but effectively blocks the migration of dissolved polysulfides. As a result, the cycling performance of Li-S batteries are significantly improved. In addition to demonstrating a PIN-membrane Li-S battery, the structural characteristics of the PIN membrane have been characterized by a series of experimental methodologies and molecular dynamics (MD) simulations.

25 ENERGY STORAGE↗

Monitoring multicomponent transport using in situ ATR FTIR spectroscopy

Membranes are a critical component of many energy generation and storage technologies, including artificial photosynthesis systems that reduce atmospheric CO 2 to high-value products. In this study, we used in situ ATR FTIR spectroscopy to monitor the crossover of three commonly-reported CO 2 reduction products—methanol, sodium formate, and sodium acetate—through Nafion ® 117, a common cation exchange membrane. Measurement errors for the permeation of mixtures of solutes are discussed. Permeabilities from one-, two-, and three-solute mixed aqueous solutions were measured using a standard diffusion cell, and ATR FTIR spectra were used to obtain time-resolved concentration data that were fit to a model describing transport of ions and small molecules through hydrated polymer films. The permeability of Nafion ® 117 to methanol measured using this methodology was in agreement with literature reports. The sorption of methanol, sodium formate, and sodium acetate, and mixtures thereof, were measured using a desorption technique. From the measured permeabilities and solubilities, diffusivities of each solute were calculated. In conclusion, differences in permeability among the solutes were found to be primarily due to differences in their solubility in Nafion ® 117.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

De Novo Synthesis of Phosphorylated Triblock Copolymers with Pathogen Virulence-Suppressing Properties That Prevent Infection-Related Mortality

Phosphate is a key and universal "cue" in response to which bacteria either enhance their virulence when local phosphate is scarce or downregulate it when phosphate is adundant. Phosphate becomes depleted in the mammalian gut following physiologic stress and serves as a major trigger for colonizing bacteria to express virulence. This process cannot be reversed with oral supplementation of inorganic phosphate because it is nearly completely absorbed in the proximal small intestine. In the present study, we describe the de novo synthesis of phosphorylated polyethylene glycol compounds with three defined ABA (hydrophilic/-phobic/-philic) structures, ABA-PEG10k-Pi10, ABA-PEG16k-Pi14, and ABA-PEG20k-Pi20, and linear polymer PEG20k-Pi20 absent of the hydrophobic block. The 10k, 16k, and 20k demonstrate the molecular weights of the poly(ethylene glycol) block, and Pi10, Pi14, and Pi20 represent the repeating units of phosphate. Polymers were tested for their efficacy against Pseudomonas aeruginosa virulence in vitro and in vivo by assessing the expression of the phosphate sensing protein PstS, the production of key virulence factor pyocyanin, and Caenorhabditis elegans killing assays. Results indicate that all phosphorylated polymers suppressed phosphate sensing, virulence expression, and lethality in P. aeruginosa. Among all of the phosphorylated polymers, ABA-PEG20kPi20 displayed the greatest degree of protection against P. aeruginosa. To define the role of the hydrophobic core in ABA-PEG20k-Pi20 in the above response, we synthesized PEG20k-Pi20 in which the hydrophobic core is absent. Results indicate that the hypdrophobic core of ABA-PEG20k-Pi20 is a key structure in its protective effect against P. aeruginosa, in part due to its ability to coat the surface of bacteria. Taken together, the synthesis of novel polymers with defined structures and levels of phosphorylation may elucidate their antivirulence action against clinically important and lethal pathogens such as P. aeruginosa

36 MATERIALS SCIENCE↗

Polymer useful for an ion exchange membrane

The present invention provides for a polymer formed by reacting a first reactant polymer, or a mixture of first reactant polymers comprising different chemical structures, comprising a substituent comprising two or more nitrogen atoms (or a functional group/sidechain comprising a two or more nitrogen atoms) with a second reactant polymer, or a mixture of second reactant polymers comprising different chemical structures, comprising a halogen substituent (or a functional group/sidechain comprising a halogen).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗