Engineering topics

Luvall, Jeffrey C.

Publications and source records attributed to Luvall, Jeffrey C..

At least 55 records · Page 3

NASA NTRS2010

Investigation of Long-Term Impacts of Urbanization when Considering Global Warming for a Coastal Tropical Region

The overachieving goal of this project is to gain a better understanding of the climate impacts caused by the combined effects of land cover and land use (LCLU) changes and increasing global concentrations of green house gases (GHG) in tropical coastal areas, regions where global, regional and local climate phenomena converge, taking as the test case the densely populated northeast region of the Caribbean island of Puerto Rico. The research uses an integrated approach of high-resolution remote sensing information linked to a high resolution Regional Atmospheric Modeling System (RAMS), which was employed to perform ensembles of climate simulations (combining 2-LCLU and 2-GHG concentration scenarios). Reconstructed agricultural maps are used to define past LCLU, and combined with reconstructed sea surface temperatures (SST) for the same period form the PAST climate scenario (1951-1956); while the PRESENT scenario (2000-2004) was additionally supported by high resolution remote sensing data (10-m-res). The climate reconstruction approach is validated with available observed climate data from surface weather stations for both periods of time simulated. The selection of the past and present climate scenarios considers large-scale biases (i.e. ENSO/NAO) as reflected in the region of interest. Direct and cross comparison of the results is allowing quantifying single, combined, and competitive effects. Results indicate that global GHG have dominant effects on minimum temperatures (following regional tendencies), while urban sprawl dominates maximum temperatures. To further investigate impacts of land use the Bowen Ratio and the thermal response number (TRN) are analyzed. The Bowen ratio indicates that forestation of past agricultural high areas have an overwhelmingly mitigation effect on increasing temperatures observed in different LCLU scenarios, but when abandoned agricultural lands are located in plains, the resulting shrub/grass lands produce higher surface temperatures. The TRN (J/m^2/degC) is a surface property defined as the ratio of the surface net radiation to the rate of change in surface temperature, expresses how those fluxes are reacting to radiant energy inputs. Natural vegetated surfaces have a greater TRN than urban and barren surfaces because the net radiation processed by them is mostly used for latent heat and thermal storage heat rather than sensible heat (heating the air). Significant changes in TRN were observed in the metropolitan area of San Juan for the two analyzed periods reflecting a reduction of this variable in the present from the past consistent with increasing in thermal mass, or intense urbanization.

Gonalez, Jorge E.↗

NASA NTRS2009

Integration of Airborne Aerosol Prediction Systems and Vegetation Phenology to Track Pollen for Asthma Alerts in Public Health Decision Support Systems

The residual signal indicates that the pollen event may influence the seasonal signal to an extent that would allow detection, given accurate QA filtering and BRDF corrections. MODIS daily reflectances increased during the pollen season. The DREAM model (PREAM) was successfully modified for use with pollen and may provide 24-36 hour running pollen forecasts. Publicly available pollen forecasts are linked to general weather patterns and roughly-known species phenologies. These are too coarse for timely health interventions. PREAM addresses this key data gap so that targeting intervention measures can be determined temporally and geospatially. The New Mexico Department of Health (NMDOH) as part of its Environmental Public Health Tracking Network (EPHTN) would use PREAM a tool for alerting the public in advance of pollen bursts to intervene and reduce the health impact on asthma populations at risk.

Luvall, Jeffrey C.↗

NASA NTRS2009

Spatial Analysis of Environmental Factors Related to Lyme Disease in Alabama by Means of NASA Earth Observation Systems

This slide presentation reviews the epidemiology of Lyme Disease that accounts for more than 95% or vector borne diseases in the United States. The history, symptoms and the life cycle of the tick, the transmitting agent of Lyme Disease, a map that shows the cases reported to the CDC between1990 and 2006 and the number of cases in Alabama by year from 1986 to 2007. A NASA project is described, the goals of which are to (1) Demonstrate the presence of the chain of infection of Lyme disease in Alabama (2) Identify areas with environmental factors that support tick population using NASA Earth Observation Systems data in selected areas of Alabama and (3) Increase community awareness of Lyme disease and recommend primary and secondary prevention strategies. The remote sensing methods included: Analyzed Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and DigitalGlobe Quickbird satellite imagery from summer months and Performed image analyses in ER Mapper 7.1. Views from the ASTER and Quickbird land cover are shown, the Normalized Difference Vegetation Index (NDVI) algorithm was applied to all ASTER and Quickbird imagery. The use of the images to obtain the level of soil moisture is reviewed, and this analysis was used along with the NDVI, was used to identify the areas that support the tick population.

Renneboog, Nathan↗

NASA NTRS2009

Spatial Analysis of West Nile Virus: Predictive Risk Modeling of a Vector-borne Infectious Disease in Illinois by Means of NASA Earth Observation Systems

West Nile Virus is a mosquito-borne virus of the family Flaviviridae. It infects birds and various mammals, including humans, and can cause encephalitis that may prove fatal, notably among vulnerable populations. Since its identification in New York City in 1999, WNV has become established in a broad range of ecological settings throughout North America, infecting more than 25,300 people and killing 1133 as of 2008 (CDC,2009). WNV is transmitted by mosquitoes that feed on infected birds. As a result, the degree of human infection depends on local ecology and human exposure. This study hypothesizes that remote sensing and GIS can be used to analyze environmental determinants of WNV transmission, such as climate, elevation, land cover, and vegetation densities, to map areas of WNV risk for surveillance and intervention.

Renneboog, Nathan↗

NASA NTRS2009

Identifying Optimal Temporal Scale for the Correlation of AOD and Ground Measurements of PM2.5 to Improve the Model Performance in a Real-time Air Quality Estimation System

Aerosol optical depth (AOD), an indirect estimate of particle matter using satellite observations, has shown great promise in improving estimates of PM 2.5 air quality surface. Currently, few studies have been conducted to explore the optimal way to apply AOD data to improve the model accuracy of PM 2.5 surface estimation in a real-time air quality system. We believe that two major aspects may be worthy of consideration in that area: 1) the approach to integrate satellite measurements with ground measurements in the pollution estimation, and 2) identification of an optimal temporal scale to calculate the correlation of AOD and ground measurements. This paper is focused on the second aspect on the identifying the optimal temporal scale to correlate AOD with PM2.5. Five following different temporal scales were chosen to evaluate their impact on the model performance: 1) within the last 3 days, 2) within the last 10 days, 3) within the last 30 days, 4) within the last 90 days, and 5) the time period with the highest correlation in a year. The model performance is evaluated for its accuracy, bias, and errors based on the following selected statistics: the Mean Bias, the Normalized Mean Bias, the Root Mean Square Error, Normalized Mean Error, and the Index of Agreement. This research shows that the model with the temporal scale of within the last 30 days displays the best model performance in this study area using 2004 and 2005 data sets.

Li, Hui↗

NASA NTRS2008

Integrated Modeling Framework

This document is a chart showing the inputs to and outputs from various parts of the integrated climate model.

Luvall, Jeffrey C.↗

NASA NTRS2007

Impacts of Urbanization in the Coastal Tropical City of San Juan, Puerto Rico

Urban sprawl in tropical locations is rapidly accelerating and it is more evident in islands where a large percentage of the population resides along the coasts. This paper focuses on the analysis of the impacts of land use and land cover for urbanization in the tropical coastal city of San Juan, in the Caribbean island of Puerto Rico. A mesoscale numerical model, the Regional Atmospheric Modeling System (RAMS), is used to study the impacts of land use for urbanization in the environment including specific characteristics of the urban heat island in the San Juan Metropolitan Area (SJMA), one of the most noticeable urban cores of the Caribbean. The research also makes use of the observations obtained during the airborne San Juan Atlas Mission. Surface and raw insonde data from the mission are used to validate the atmospheric model yielding satisfactory results. Airborne high resolution remote sensing data are used to update the model's surface characteristics in order to obtain a more accurate and detailed configuration of the SJMA and perform a climate impact analysis based on land cover/land use (LCLU) changes. The impact analysis showed that the presence of the urban landscape of San Juan has an impact reflected in higher air temperatures over the area occupied by the city, with positive values of up to 2.5 degrees C, for the simulations that have specified urban LCLU indexes in the model's bottom boundary. One interesting result of the impact analysis was the finding of a precipitation disturbance shown as a difference in total accumulated rainfall between the present urban landscape and with a potential natural vegetation, apparently induced by the presence of the urban area. Results indicate that the urban-enhanced cloud formation and precipitation development occur mainly downwind of the city, including the accumulated precipitation. This spatial pattern can be explained by the presence of a larger urbanized area in the southwest sector of the city, and of the approaching northeasterly trade winds.

Comarazamy, Daniel E.↗

NASA NTRS2007

Use of Remote Sensing and Dust Modelling to Evaluate Ecosystem Phenology and Pollen Dispersal

The impact of pollen release and downwind concentrations can be evaluated utilizing remote sensing. Previous NASA studies have addressed airborne dust prediction systems PHAiRS (Public Health Applications in Remote Sensing) which have determined that pollen forecasts and simulations are possible. By adapting the deterministic dust model (as an in-line system with the National Weather Service operational forecast model) used in PHAiRS to simulate downwind dispersal of pollen, initializing the model with pollen source regions from MODIS, assessing the results a rapid prototype concept can be produced. We will present the results of our effort to develop a deterministic model for predicting and simulating pollen emission and downwind concentration to study details or phenology and meteorology and their dependencies, and the promise of a credible real time forecast system to support public health and agricultural science and service. Previous studies have been done with PHAiRS research, the use of NASA data, the dust model and the PHAiRS potential to improve public health and environmental services long into the future.

Luvall, Jeffrey C.↗

NASA NTRS2007

The Use of the Airborne Thermal/Visible Land Application Sensor (ATLAS) to Determine the Thermal Response Numbers for Urban Areas

Although satellite data are very useful for analysis of the urban heat island effect at a coarse scale, they do not lend themselves to developing a better understanding of which surfaces across the city contribute or drive the development of the urban heat island effect. Analysis of thermal energy responses for specific or discrete surfaces typical of the urban landscape (e.g., asphalt, building rooftops, vegetation) requires measurements at a very fine spatial scale (i.e., < 15m) to adequately resolve these surfaces and their attendant thermal energy regimes. Additionally, very fine scale spatial resolution thermal infrared data, such as that obtained from aircraft, are very useful for demonstrating to planning officials, policy makers, and the general populace the benefits of the urban forest. These benefits include mitigating the urban heat island effect, making cities more aesthetically pleasing and more habitable environments, and aid in overall cooling of the community. High spatial resolution thermal data are required to quantify how artificial surfaces within the city contribute to an increase in urban heating and the benefit of cool surfaces (e.g., surface coatings that reflect much of the incoming solar radiation as opposed to absorbing it thereby lowering urban temperatures). The TRN (thermal response number)(Luvall and Holbo 1989) is a technique using aircraft remotely sensed surface temperatures to quantify the thermal response of urban surfaces. The TRN was used to quantify the thermal response of various urban surface types ranging from completely vegetated surfaces to asphalt and concrete parking lots for several cities in the United States.

Luvall, Jeffrey C.↗

NASA NTRS2007

Analysis of The Surface Radiative Budget Using ATLAS Data for San Juan, Puerto Rico

The additional beating of the air over the city is the result of the replacement of naturally vegetated surfaces with those composed of asphalt, concrete, rooftops and other man-made materials. The temperatures of these artificial surfaces can be 20 to 40 C higher than vegetated surfaces. This produces a dome of elevated air temperatures 5 to 8 C greater over the city, compared to the air temperatures over adjacent rural areas. Urban landscapes are a complex mixture of vegetated and nonvegetated surfaces. It is difficult to take enough temperature measurements over a large city area to characterize the complexity of urban radiant surface temperature variability. The NASA Airborne Thermal and Land Applications Sensor (ATLAS) operates in the visual and IR bands was used in February 2004 to collect data from San Juan, Puerto Rico with the main objective of investigating the Urban Heat Island (UHI) in tropical cities.

Luvall, Jeffrey C.↗

NASA NTRS2007

Impacts of Urbanization in the Coastal Tropical City of San Juan, Puerto Rico

Urban sprawl in tropical locations is rapidly accelerating and it is more evident in islands where a large percentage of the population resides along the coasts. This paper focuses on the analysis of the impacts of land use and land cover for urbanization in the tropical coastal city of San Juan, in the Caribbean island of Puerto Rico. A mesoscale numerical model, the Regional Atmospheric Modeling System (RAMS), is used to study the impacts of land use for urbanization in the environment including specific characteristics of the urban heat island in the San Juan Metropolitan Area (SJMA), one of the most noticeable urban cores of the Caribbean. The research also makes use of the observations obtained during the airborne San Juan Atlas Mission. Surface and rawinsonde data from the mission are used to validate the atmospheric model yielding satisfactory results. Airborne high resolution remote sensing data are used to update the model's surface characteristics in order to obtain a more accurate and detailed configuration of the SJMA and perform a climate impact analysis based on land cover/land use (LCLU) changes. The impact analysis showed that the presence of the urban landscape of San Juan has an impact reflected in higher air temperatures over the area occupied by the city, with positive values of up to 2.5 C, for the simulations that have specified urban LCLU indexes in the model's bottom boundary. One interesting result of the impact analysis was the finding of a precipitation disturbance shown as a difference in total accumulated rainfall between the present urban landscape and with a potential natural vegetation, apparently induced by the presence of the urban area. Results indicate that the urban enhanced cloud formation and precipitation development occur mainly downwind of the city, including the accumulated precipitation. This spatial pattern can be explained by the presence of a larger urbanized area in the southwest sector of the city, and of the approaching northeasterly trade winds. No significant impacts were found in the sea breeze patterns of the city.

Comarazamy, Daniel E.↗

NASA NTRS2006

The Need for High Spatial Resolution Multispectral Thermal Remote Sensing Data In Urban Heat Island Research

Although the study of the Urban Heat Island (UHI) effect dates back to the early 1800's when Luke Howard discovered London s heat island, it has only been with the advent of thermal remote sensing systems that the extent, characteristics, and impacts of the UHI have become to be understood. Analysis of the UHI effect is important because above all, this phenomenon can directly influence the health and welfare of urban residents. For example, in 1995, over 700 people died in Chicago due to heat-related causes. UHI s are characterized by increased temperature in comparison to rural areas and mortality rates during a heat wave increase exponentially with the maximum temperature, an effect that is exacerbated by the UHI. Aside from the direct impacts of the UHI on temperature, UHI s can produce secondary effects on local meteorology, including altering local wind patterns, increased development of clouds and fog, and increasing rates of precipitation either over, or downwind, of cities. Because of the extreme heterogeneity of the urban surface, in combination with the sprawl associated with urban growth, thermal infrared (TIR) remote sensing data have become of significant importance in understanding how land cover and land use characteristics affect the development and intensification of the UHI. TIR satellite data have been used extensively to analyze the surface temperature regimes of cities to help observe and measure the impacts of surface temperatures across the urban landscape. However, the spatial scales at which satellite TIR data are collected are for the most part, coarse, with the finest readily available TIR data collected by the Landsat ETM+ sensor at 60m spatial resolution. For many years, we have collected high spatial resolution (10m) data using an airborne multispectral TIR sensor over a number of cities across the United States. These high resolution data have been used to develop an understanding of how discrete surfaces across the urban environment (e.g., rooftops, pavements) interact from a surface-lower atmosphere energy flux perspective, to force the development of the UHI. Moreover, the airborne TIR sensor we used in our UHI studies was a multispectral sensor that had six channels in the 8-12pm range. The advantages of collecting multispectral TIR data became readily evident as a valuable tool for better calculation of unique surface thermal energy responses for urban materials over the 8-12 micrometer region, and also for getting a better handle on surface emissivity characteristics for these discrete surfaces. In this presentation, we will provide evidence on the virtues of how high spatial resolution multispectral TIR data can provide for better analysis of the UHI that cannot now be attained via TIR data obtained from satellites. Furthermore, we wish to provide compelling evidence on why future TIR satellite sensors should collect data at fine spatial resolutions (e.g. less than or equal to 30m) to better allow for measurement of surface thermal energy fluxes from discrete urban surfaces, and to better understand how surface fluxes from different urban materials in cities around the world in different climatic regimes, affect development of the UHI characteristics.

Quattrochi, Dale A.↗

NASA NTRS2006

Introduction to the Special Session on Thermal Remote Sensing Data for Earth Science Research: The Critical Need for Continued Data Collection and Development of Future Thermal Satellite Sensors

There is a rich and long history of thermal infrared (TIR) remote sensing data for multidisciplinary Earth science research. The continuity of TIR data collection, however, is now in jeopardy given there are no planned future Earth observing TIR remote sensing satellite systems with moderately high spatial resolutions to replace those currently in orbit on NASA's Terra suite of sensors. This session will convene researchers who have actively worked in the field of TIR remote sensing to present results that elucidate the importance of thermal remote sensing to the wider Earth science research community. Additionally, this session will also exist as a forum for presenting concepts and ideas for new thermal sensing systems with high spatial resolutions for future Earth science satellite missions, as opposed to planned systems such as the Visible/Infrared Imager/Radiometer (VIIRS) suite of sensors on the National Polar-orbiting Operational Environmental Satellite System (NPOESS) that will collect TIR data at very coarse ~~~iairesolutions.

Quattrochi, Dale a.↗

NASA NTRS2006

The Use of ATLAS Data to Quantify Surface Radiative Budget Alteration Through Urbanization for San Juan, Puerto Rico.

The additional heating of the air over the city is the result of the replacement of naturally vegetated surfaces with those composed of asphalt, concrete, rooftops and other manmade materials. The temperatures of these artificial surfaces can be 20 to 40 0 C higher than vegetated surfaces. Materials such as asphalt store much of the sun s energy and remains hot long after sunset. This produces a dome of elevated air temperatures 5 to 8 C greater over the city, compared to the air temperatures over adjacent rural areas. This effect is called the "urban heat island". Urban landscapes are a complex mixture of vegetated and nonvegetated surfaces. It is difficult to take enough temperature measurements over a large city area to characterize the complexity of urban radiant surface temperature variability. However, the use of remotely sensed thermal data from airborne scanners are ideal for the task. The NASA Airborne Thermal and Land Applications Sensor (ATLAS) operates in the visual and IR bands was used in February 2004 to collect data from San Juan, Puerto Rico with the main objective of investigating the Urban Heat Island (UHI) in tropical cities. In this presentation we will examine the techniques of analyzing remotely sensed data for measuring the effect of various urban surfaces on their contribution to the urban heat island effect. Results from data collected from other US cities of Sacramento, Salt Lake City and Baton Rouge will be used to compare the "urban fabric" among the cities.

Luvall, Jeffrey C.↗

NASA NTRS2006

The Critical Need for Continued Data Collection and Development of Future Thermal Satellite Sensors

Quattrochi, Dale A.↗

NASA NTRS2005

Aircraft Based Remotely Sensed Albedo and Surface Temperatures for Three US Cities

High spatial resolution thermal infrared and visible data obtained from aircraft were used to measure, map, and model the surface energy budget characteristics of surfaces typical of the urban landscape for three US cities. Aircraft data collected from the Advanced Thermal and Land Applications Sensor (ATLAS) scanner allowed a detail analysis of the city, determining its surface thermal and visible reflectance properties. These data are critical in providing data that can be used to evaluate the overall "fabric" of the cities in relation to the urban heat island and air quality modeling.

Luvall, Jeffrey C.↗

NASA NTRS2004

Estimating Spatially-distributed Surface Fluxes in a Semi-arid Great Basin Desert Using Landsat TM Thermal Data

The research described in this chapter demonstrates a method for using Landsat Thematic Mapper data to estimate instantaneous regional-scale energy fluxes over an arid valley in eastern Nevada, U.S.A. Here point-based models of surface energy and water balance fluxes were applied to individual pixels of a Landsat Thematic Mapper scene over the study area. Although the method used to estimate these instantaneous fluxes requires certain assumptions be made about the spatial distribution of several physical parameters, the results from this analysis and modeling suggest that it is possible to scale from point measurements of environmental state variables (i.e., net radiation flux, surface heat flux, sensible heat flux, and latent heat flux) to regional estimates of energy exchange to obtain an understanding of the spatial relationship between these fluxes and landscape variables.

Quattrochi, Dale A.↗

NASA NTRS2002

Urban Surface Radiative Energy Budgets Determined Using Aircraft Scanner Data

It is estimated that by the year 2025, 80% of the world's population will live in cities. The extent of these urban areas across the world can be seen in an image of city lights from the Defense Meteorological Satellite Program. In many areas of North America and Europe, it is difficult to separate individual cities because of the dramatic growth and sprawl of urbanized areas. This conversion of the natural landscape vegetation into man-made urban structures such as roads and buildings drastically alter the regional surface energy budgets, hydrology, precipitation patterns, and meteorology. One of the earliest recognized and measured phenomena of urbanization is the urban heat island (UHI) which was reported as early as 1833 for London and 1862 for Paris. The urban heat island results from the energy that is absorbed by man-made materials during the day and is released at night resulting in the heating of the air within the urban area. The magnitude of the air temperature difference between the urban and surrounding countryside is highly dependent on the structure of the urban area, amount of solar immolation received during the day, and atmospheric conditions during the night. These night time air temperature differences can be in the range of 2 to 5 C. or greater. Although day time air temperature differences between urban areas and the countryside exists during the day, atmospheric mixing and stability reduce the magnitude. This phenomena is not limited to large urban areas, but also occurs in smaller metropolitan areas. The UHI has significant impacts on the urban air quality, meteorology, energy use, and human health. The UPI can be mitigated through increasing the amount of vegetation and modification of urban surfaces using high albedo materials for roofs and paved surfaces. To understand why the urban heat island phenomenon exists it is useful to define the surface in terms of the surface energy budget. Surface temperature and albedo is a major component of the surface energy budget. Knowledge of it is important in any attempt to describe the radiative and mass fluxes which occur at the surface. Use of energy terms in modeling surface energy budgets allows the direct comparison of various land surfaces encountered in a urban landscape, from vegetated (forest and herbaceous) to non-vegetated (bare soil, roads, and buildings). These terms are also easily measured using remote sensing from aircraft or satellite platforms allowing one to examine the spacial variability. The partitioning of energy budget terms depends on the surface type. In natural landscapes, the partitioning is dependent on canopy biomass, leaf area index, aerodynamic roughness, and moisture status, all of which are influenced by the development stage of the ecosystem. In urban landscapes, coverage by man-made materials substantially alters the surface face energy budget. The remotely sensed data obtained from aircraft and satellites, when properly calibrated allows the measurement of important terms in the radiative surface energy budget a urban landscape scale.

Luvall, Jeffrey C.↗