Engineering Papers⌕ Search

Engineering topics

Luo, Weidong

Publications and source records attributed to Luo, Weidong.

At least 19 records

Enhanced Magnetization in CoFe 2 O 4 Through Hydrogen Doping

Magnetic spinel oxides have attracted extensive research interest due to their rich physics and wide range of applications. However, these materials invariably suffer suppressed magnetization, due to structural imperfections (e.g., disorder, anti-site defects, etc.). Herein, a dramatic enhanced magnetization is obtained with an increasement of 5 µ B /u.c in CoFe 2 O 4 (CFO) through ionic liquid gating induced hydrogen doping. Further, the intercalated hydrogen ions lead to both distinct lattice expansion of ≈0.7% and notable Fe valence state reduction through electron doping, in which ≈17% Fe 3+ is reduced into Fe 2+ . These facts collectively trigger a site-specific spin-flip on tetrahedrally coordinated Co 2+ sites that enhances the net ferrimagnetic moment nearly to its theoretical maximum for perfect CFO.

36 MATERIALS SCIENCE↗

Anisotropic surface state in a topological semimetal candidate Ta 3 SiTe 6

Using high-resolution angle-resolved photoemission spectroscopy, we studied the surface state of Ta 3 SiTe 6 , a candidate of topological semimetal protected by nonsymmorphic symmetry. Through photon-energy dependent measurements, the surface state near the Fermi level was detected. By determining the band dispersions, we found that the surface state is topological trivial. Around the surface Brillouin zone center, the surface bands disperse linear-like, forming a band crossing (zero energy gap) point at about 0.2 eV below the Fermi level. In Ta 3 SiTe 6 's rectangular surface Brillouin zone, the surface bands only cross the Fermi level along one axis, forming two hole-like Fermi pockets near surface Brillouin zone boundaries. Although the observed surface state is not topological, we proposed that its anisotropic Fermi surface topography could be potentially useful for future applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phonon Polariton-assisted Infrared Nanoimaging of Local Strain in Hexagonal Boron Nitride

Strain plays an important role in condensed matter physics and materials science because it can strongly modify the mechanical, electrical, and optical properties of a material and even induce a structural phase transition. Strain effects are especially interesting in atomically thin two-dimensional (2D) materials, where unusually large strain can be achieved without breaking them. Measuring the strain distribution in 2D materials at the nanometer scale is therefore greatly important but is extremely challenging experimentally. Here, we use near-field infrared nanoscopy to demonstrate phonon polariton-assisted mapping and quantitative analysis of strain in atomically thin polar crystals of hexagonal boron nitride (hBN) at the nanoscale. A local strain as low as 0.01% can be detected using this method with ~20 nm spatial resolution. Such ultrasensitive nanoscale strain imaging and analysis technique opens up opportunities for exploring unique local strain structures and strain-related physics in 2D materials. In addition, experimental evidence for local strain-induced phonon polariton reflection is also provided, which offers a new approach to manipulate light at deep subwavelength scales for nanophotonic devices.

36 MATERIALS SCIENCE↗

Vectorial mapping of noncollinear antiferromagnetic structure of semiconducting FeSe surface with spin-polarized scanning tunneling microscopy

Antiferromagnetic semiconductors gain increasing interest due to their possible application in spintronics. Using spin polarized scanning tunneling microscopy operating in a vector field, we mapped the noncollinear antiferromagnetic spin structure of a semiconducting hexagonal FeSe surface on the atomic scale. The surface possesses an in-plane compensated Néel structure which is further confirmed by first-principles calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interface control of bulk ferroelectric polarization

The control of material interfaces at the atomic level has led to no- vel interfacial properties and functionalities. In particular, the study of polar discontinuities at interfaces between complex oxides lies at the frontier of modern condensed matter research. Here we em- ploy a combination of experimental measurements and theoretical calculations to demonstrate the control of a bulk property, namely ferroelectric polarization, of a heteroepitaxial bilayer by precise atomic-scale interface engineering. More specifically, the control is achieved by exploiting the interfacial valence mismatch to influence the electrostatic potential step across the interface, which manifests itself as the biased-voltage in ferroelectric hysteresis loops and determines the ferroelectric state. A broad study of diverse systems comprising different ferroelectrics and conducting perovskite un- derlayers extends the generality of this phenomenon.

Yu, P↗

Atomic-scale compensation phenomena at polar interfaces

The interfacial screening charge that arises to compensate electric fields of dielectric or ferroelectric thin films is now recognized as the most important factor in determining the capacitance or polarization of ultrathin ferroelectrics. Here we investigate using aberration-corrected electron microscopy and density-functional theory to show how interfaces cope with the need to terminate ferroelectric polarization. In one case, we show evidence for ionic screening, which has been predicted by theory but never observed. For a ferroelectric film on an insulating substrate, we found that compensation can be mediated by an interfacial charge generated, for example, by oxygen vacancies.

36 MATERIALS SCIENCE↗

Oscillatory Mass Transport in Vapor-Liquid-Solid Growth of Sapphire Nanowires

In vapor-liquid-solid (VLS) growth, the liquid phase plays a pivotal role in mediating mass transport from the vapor source to the growth front of a nanowire. Such transport often takes place through the liquid phase. However, we observed by in situ transmission electron microscopy a different behavior for self-catalytic VLS growth of sapphire nanowires. The growth occurs in a layer-by-layer fashion and is accomplished by interfacial diffusion of oxygen through the ordered liquid aluminum atoms. Oscillatory growth and dissolution reactions at the top rim of the nanowires occur and supply the oxygen required to grow a new (0006) sapphire layer. A periodic modulation of the VLS triple-junction configuration accompanies these oscillatory reactions.

36 MATERIALS SCIENCE↗

Electronic and Crystal-field Effects in the Fine Structure of Electron Energy-loss Spectra of Manganites

The fine structure of oxygen-K electron energy-loss spectra (EELS) of transition-metal oxides is known to correlate with nominal oxidation states (NOSs) that are often interpreted as charge states. Here we report calculations of O-K EELS in La{sub x}Ca{sub 1-x}MnO{sub 3} that agree with measured spectra and show that the variation in the prepeak's intensity with doping is controlled by the orbital occupancy of the majority-spin Mn 3d states, while its width is controlled by crystal-field splitting. The results confirm an earlier conclusion that the NOS extracted from EELS corresponds only to orbital occupancies, while the physical charge renders all atoms electrically neutral, even in so-called ionic crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

From trans-polyacetylene to zigzag-edged graphene nanoribbons

A zigzag-edged graphene nanoribbon (ZGNR) can be indexed by a width, N, which is the number of parallel trans-polyacetylene-like chains comprising the ribbon. Although ZGNRs with N = 4 or greater have been found to have an antiferromagnetic ground state and a ferromagnetic metastable state, how the ribbon makes the transition from N = 1 (namely, trans-polyacetylene - a one-dimensional, nonmagnetic semiconductor) to the wider ones is unclear. Using hybrid density functional theory, we show that N = 2 (polyacene) can be considered the narrowest ZGNR with an antiferromagnetic insulating ground state and a metastable, metallic ferromagnetic state.

36 MATERIALS SCIENCE↗

The Smallest Thiolated Gold Superatom Complexes

The superatom concept of metallic cluster valence is based on the electron-shell model as first proposed to explain the special stability of certain metal-atom clusters generated in the gas phase. It accounts for the magic-number series 2, 8, 18, 34, 58,... by shell-closing of the superatom orbitals 1S, 1P, 1D,.... Recently, the superatom-complex concept has been introduced to explain the compositions of high-yield gold-cluster compounds, especially Au{sub 25}(SR){sub 18}{sup -} and Au{sub 102}(SR){sub 44} (with -SR being a thiolate group), corresponding to the magic numbers of 8 and 58, respectively. Surprisingly, no thiolated gold cluster accounting for the first closing (electron count 2) has yet been determined. Structure-bonding considerations lead us to propose Au{sub 12}(SR){sub 9}{sup +} as the superior candidate for the smallest thiolated gold superatom. This cluster features an octahedron core covered by three RS(AuSR){sub 2} motifs. It has a unique C{sub 3} axis, is chiral, and possesses ideal aurophilic interactions and, therefore, should exist in nature. The folding of thiol-rich biomolecules may help us to realize this complex, which may also be prepared from available phosphine-ligated gold clusters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thiolated Gold Nanowires: Metallic versus Semiconducting

Tremendous research efforts have been spent on thiolated gold nanoparticles and self-assembled monolayers of thiolate (RS-) on gold, but thiolated gold nanowires have received almost no attention. Here we computationally design two such one-dimensional nanosystems by creating a linear chain of Au icosahedra, fused together by either vertex sharing or face sharing. Then neighboring Au icosahedra are bridged by five thiolate groups for the vertex-sharing model and three RS?Au?SR motifs for the face-sharing model. We show that the vertex-sharing thiolated gold nanowire can be made either semiconducting or metallic by tuning the charge, while the face-sharing one is always metallic. We explain this difference between the two nanowires by examining their band structures and invoking a previously proposed electron-count rule. Implications of our findings for previous experimentation of gold nanowires are discussed, and a potential way to make thiolated gold nanowires is proposed.

36 MATERIALS SCIENCE↗

Aberration-corrected scanning transmission electron microscopy: from atomic imaging and analysis to solving energy problems

The new possibilities of aberration-corrected scanning transmission electron microscopy (STEM) extend far beyond the factor of 2 or more in lateral resolution that was the original motivation. The smaller probe also gives enhanced single atom sensitivity, both for imaging and for spectroscopy, enabling light elements to be detected in a Z-contrast image and giving much improved phase contrast imaging using the bright field detector with pixel-by-pixel correlation with the Z-contrast image. Furthermore, the increased probe-forming aperture brings significant depth sensitivity and the possibility of optical sectioning to extract information in three dimensions. This paper reviews these recent advances with reference to several applications of relevance to energy, the origin of the low-temperature catalytic activity of nanophase Au, the nucleation and growth of semiconducting nanowires, and the origin of the eight orders of magnitude increased ionic conductivity in oxide superlattices. Possible future directions of aberration-corrected STEM for solving energy problems are outlined.

47 OTHER INSTRUMENTATION↗

Point defect configurations of supersaturated Au atoms inside Si nanowires

Aberration-corrected scanning transmission electron microscopy (STEM) is used to reveal individual Au atom configurations inside Si nanowires grown by Au-catalyzed vapor–liquid–solid (VLS) molecular beam epitaxy (MBE). We identify a substitutional and three distinct interstitial configurations, one of which has not been previously identified. We confirm the stability of the observed point defect configurations by density functional theory (DFT) calculations. The observed number densities of the various configurations are in accord with their calculated formation energies. Lastly, the concentration of Au atoms is larger than the solubility limit, but the effect may be caused by the STEM beam.

36 MATERIALS SCIENCE↗

The "staple" motif: a key to stability of thiolate-protected gold nanoclusters

Recently obtained single-crystal structure of a thiolate-protected gold cluster shows that all thiolate groups form 'staple' motifs on the cluster surface. To find out the driving force for such a formation, we use first-principles density functional theory simulations to model formation of 'staple' motifs on an Au38 cluster from zero to full coverage. By geometry optimization, molecular dynamics, and simulated annealing, we show that formation of 'staples' is strongly preferred on a cluster surface and helps stabilize the cluster by pinning the surface Au atoms and increasing the HOMO-LUMO gap. We devise a method to generate initial structural models for thiolate-protected gold clusters by adding 'staples' to the cluster surface. Using this method, we obtain a staple-covered, low-energy structure for Au{sub 38}(SCH{sub 3}){sub 24}, a much studied cluster whose structure is not yet known. Optical band-edge energy computed from time-dependent DFT for our Au{sub 38}(SCH{sub 3}){sub 24} structure shows good agreement with experiment.

36 MATERIALS SCIENCE↗

In search of a structural model for a thiolate-protected Au38 cluster

The structure of thiolate-protected gold cluster Au{sub 38}(SR){sub 24} has not been experimentally determined, and the best available signature is its measured optical spectrum. Using this signature and energetic stability as criteria and SCH{sub 3} for SR, we compare four candidate structures: two from others and two we obtained. Our models are distinct from others in that thiolate groups form monomers and dimers of the staple motif (a nearly linear RS-Au-SR bonding unit). We examine the energetics and electronic structures of the four structures with density functional theory (DFT) and compute their optical spectra with time-dependent DFT. We show that our dimer-dominated model is over 2.6 eV lower in energy than the two models from others and 1.3 eV lower than our previous monomer-dominated model. The dimer-dominated model also presents good agreement with experiment for optical absorption.

36 MATERIALS SCIENCE↗