Engineering Papers⌕ Search

Engineering topics

Luo, Hong

Publications and source records attributed to Luo, Hong.

At least 19 records

Robust 3D multi-material hydrodynamics using discontinuous Galerkin methods

A high-order discontinuous Galerkin (DG) method is presented for nonequilibrium multi-material (m ≥ 2) flow with sharp interfaces. Material interfaces are reconstructed using the algebraic THINC approach, resulting in a sharp interface resolution. The system assumes stiff velocity relaxation and pressure nonequilibrium. The presented DG method uses Dubiner's orthogonal basis functions on tetrahedral elements. This results in a unique combination of sharp multimaterial interfaces and high-order accurate solutions in smooth single-material regions. A novel shock indicator based on the interface conservation condition is introduced to mark regions with discontinuities. Slope limiting techniques are applied only in these regions so that nonphysical oscillations are eliminated while maintaining high-order accuracy in smooth regions. A local projection is applied on the limited solution to ensure discrete closure law preservation. The effectiveness of this novel limiting strategy is demonstrated for complex three-dimensional multi-material problems, where robustness of the method is critical. The presented numerical problems demonstrate that more accurate and efficient multi-material solutions can be obtained by the DG method, as compared to second-order finite volume methods.

97 MATHEMATICS AND COMPUTING↗

A parallel p ‐adaptive discontinuous Galerkin method for the Euler equations with dynamic load‐balancing on tetrahedral grids

Abstract A novel p ‐adaptive discontinuous Galerkin (DG) method has been developed to solve the Euler equations on three‐dimensional tetrahedral grids. Hierarchical orthogonal basis functions are adopted for the DG spatial discretization while a third order TVD Runge‐Kutta method is used for the time integration. A vertex‐based limiter is applied to the numerical solution in order to eliminate oscillations in the high order method. An error indicator constructed from the solution of order and is used to adapt degrees of freedom in each computational element, which remarkably reduces the computational cost while still maintaining an accurate solution. The developed method is implemented with under the Charm++ parallel computing framework. Charm++ is a parallel computing framework that includes various load‐balancing strategies. Implementing the numerical solver under Charm++ system provides us with access to a suite of dynamic load balancing strategies. This can be efficiently used to alleviate the load imbalances created by p ‐adaptation. A number of numerical experiments are performed to demonstrate both the numerical accuracy and parallel performance of the developed p ‐adaptive DG method. It is observed that the unbalanced load distribution caused by the parallel p ‐adaptive DG method can be alleviated by the dynamic load balancing from Charm++ system. Due to this, high performance gain can be achieved. For the testcases studied in the current work, the parallel performance gain ranged from 1.5× to 3.7×. Therefore, the developed p ‐adaptive DG method can significantly reduce the total simulation time in comparison to the standard DG method without p ‐adaptation.

97 MATHEMATICS AND COMPUTING↗

On the design of stable, consistent, and conservative high-order methods for multi-material hydrodynamics

Obtaining stable and high-order numerical solutions for multi-material hydrodynamics is an open challenge. Although slope limiters are widely used to maintain monotonicity near discontinuities, typical limiting procedures violate closure laws at the discrete level when applied to multi-material hydrodynamics equations. Due to this, the high-order expansions of quantities related by the closure laws are no longer consistent. The commonly observed symptom of this consistency-violation is that the numerical method fails to maintain constant pressure and velocity across material interfaces. This leads to sub-optimal convergence rates for smooth multi-material problems as well. Specialized limiting procedures that satisfy consistency while maintaining conservation need to be developed for such equations. A novel procedure that re-instates consistency into slope-limited high-order discretizations applied to the multi-material hydrodynamics equations is presented here. Using simple examples, it is demonstrated that the presented method satisfies closure laws at the discrete level, while maintaining conservative properties of the high-order method. Furthermore, this procedure involves a projection step which relies on the compact basis of the underlying spatial discretization, i.e. for discontinuous schemes (viz. DG and FV) the projection is local, and does not involve global matrix solves. Comparisons with conventional approaches emphasizes the necessity of the consistent closure-law preserving limiting approach, in order to maintain design order of accuracy for smooth multi-material problems.

36 MATERIALS SCIENCE↗

A moving discontinuous Galerkin finite element method with interface condition enforcement for compressible flows

A variation of moving discontinuous Galerkin finite element method with interface condition enforcement (MDG-ICE) is developed for solving the compressible Euler equations. The MDG-ICE method, originating from the work of Corrigan et al. [1], [2], [3], [4], is based on the space-time DG formulation, where both flow field and grid geometry are considered as independent variables and the conservation laws are enforced both on discrete elements and element interfaces. The element conservation laws are solved in the standard discontinuous solution space to determine conservative quantities, while the interface conservation is enforced using a variational formulation in a continuous space to determine discrete grid geometry. The resulting over-determined system of nonlinear equations arising from the MDG-ICE formulation can then be solved in a least-squares sense, leading to an unconstrained nonlinear least-squares problem that is regularized and solved by Levenberg-Marquardt method. A number of numerical experiments for both 1D unsteady and 2D steady state compressible flow problems are conducted to assess the accuracy and robustness of the MDG-ICE method. Numerical results obtained indicate that the MDG-ICE method is able to implicitly detect and track all types of discontinuities via interface conservation enforcement and satisfy the conservation law on both elements and interfaces via grid movement and grid management, demonstrating that an exponential rate of convergence for Sod and Lax-Harden shock tube problems can be achieved and highly accurate solutions without overheating to both double-rarefaction wave and Noh problems can be obtained.

97 MATHEMATICS AND COMPUTING↗

Asynchronous distributed-memory task-parallel algorithm for compressible flows on unstructured 3D Eulerian grids

Here, we discuss the implementation of a finite element method, used to numerically solve the Euler equations of compressible flows, using an asynchronous runtime system (RTS). The algorithm is implemented for distributed-memory machines, using stationary unstructured 3D meshes, combining data-, and task-parallelism on top of the Charm++ RTS. Charm++’s execution model is asynchronous by default, allowing arbitrary overlap of computation and communication. Task-parallelism allows scheduling parts of an algorithm independently of, or dependent on, each other. Built-in automatic load balancing enables continuous redistribution of computational load by migration of work units based on real-time CPU load measurement. The RTS also features automatic checkpointing, fault tolerance, resilience against hardware failure, and supports power-, and energy-aware computation. We demonstrate scalability up to 25 x 10 9 cells at $\mathscr{O}$10 4 compute cores and the benefits of automatic load balancing for irregular workloads. The full source code with documentation is available at https://quinoacomputing.org.

42 ENGINEERING↗

A reconstructed discontinuous Galerkin method for compressible flows in Lagrangian formulation

In this work, a high-order accurate reconstructed discontinuous Galerkin (rDG) method is developed for solving two-dimensional hydrodynamic problems in cell-centered updated Lagrangian formulation. This method is the Lagrangian limit of the unsplit rDG-ALE formulation, and is obtained by assuming the equality of the grid velocity to the fluid velocity only at cell boundaries. The conservative variables and the Taylor basis defined on the time-dependent moving mesh, provide the piece-wise polynomial expansion in the updated Lagrangian formulation. A multi-directional nodal Riemann solver is implemented for computing the grid velocity at the vertices and the numerical flux at the cell boundaries. A characteristic limiting procedure is extended from the primitive variable version to the conservative variable version, and its performance is compared with the limiter on physical variables. A number of benchmark test cases are conducted to assess the accuracy, robustness, and non-oscillatory property of the DG(P0), DG(P1) and rDG(P1P2) methods. The numerical experiments demonstrate that the developed rDG method is able to attain the designed order of accuracy and the characteristic limiting procedure outperforms the limiter on physical variables in terms of the monotonicity and symmetry preservation for shock problems.

42 ENGINEERING↗

Asynchronous Navier-Stokes Solver on 3D Unstructured Grids for the Exascale Era

This project has developed multiple fluid dynamics solvers for complex 3D flows using fully asynchronous distributed-memory task-parallel algorithms on top of the Charm++ runtime system. The algorithms solve the Euler or Navier-Stokes equations of compressible flows using unstructured tetrahedron meshes with optional solution-adaptive mesh-, and polynomial-order refinement. We have demonstrated excellent strong scaling up 50K compute cores and the benefits of Charm++’s automatic load balancing.

97 MATHEMATICS AND COMPUTING↗

DRMY1, a Myb-Like Protein, Regulates Cell Expansion and Seed Production in Arabidopsis thaliana

Abstract Plant organ development to a specific size and shape is controlled by cell proliferation and cell expansion. Here, we identify a novel Myb-like Arabidopsis gene, Development Related Myb-like1 (DRMY1), which controls cell expansion in both vegetative and reproductive organs. DRMY1 is strongly expressed in developing organs and its expression is reduced by ethylene while it is induced by ABA. DRMY1 has a Myb-like DNA-binding domain, which is predominantly localized in the nucleus and does not exhibit transcriptional activation activity. The loss-of-function T-DNA insertion mutant drmy1 shows reduced organ growth and cell expansion, which is associated with changes in the cell wall matrix polysaccharides. Interestingly, overexpression of DRMY1 in Arabidopsis does not lead to enhanced organ growth. Expression of genes involved in cell wall biosynthesis/remodeling, ribosome biogenesis and in ethylene and ABA signaling pathways is changed with the deficiency of DRMY1. Our results suggest that DRMY1 plays an essential role in organ development by regulating cell expansion either directly by affecting cell wall architecture and/or cytoplasmic growth or indirectly through the ethylene and/or ABA signaling pathways.

Cell Biology↗

An enhanced AUSM + -up scheme for high-speed compressible two-phase flows on hybrid grids

Here in this work, an enhanced AUSM + -up scheme is presented for high-speed compressible two-phase flows using a six-equation two-fluid single-pressure model. Based on the observation that the AUSM + -up flux function does not take into account relative velocity between the two phases and thus is not stable and robust for computation of two-phase flows involving interaction of strong shock waves and material interfaces, the enhancement is in the form of a volume fraction coupling term and a modification of the velocity diffusion term, both proportional to the relative velocity between the two phases. These modifications in the flux function obviate the need to employ the exact Riemann solver, leading to a significantly less expensive yet robust flux scheme. Furthermore, the Tangent of Hyperbola for INterface Capturing (THINC) scheme is used in order to provide a sharp resolution for material interfaces. A number of benchmark test cases are presented to assess the performance and robustness of the enhanced AUSM + -up scheme for compressible two-phase flows on hybrid unstructured grids. Lastly, the numerical experiments demonstrate that the enhanced AUSM + -up scheme along with THINC scheme can efficiently compute high-speed two-fluid flows such as shock–bubble interactions, while accurately capturing material interfaces.

42 ENGINEERING↗

A robust and efficient finite volume method for compressible inviscid and viscous two-phase flows [A robust and efficient finite volume method for compressible viscous two-phase flows]

A robust and efficient density-based finite volume method is developed for solving the six-equation single pressure system of two-phase flows at all speeds on hybrid unstructured grids. Unlike conventional approaches where an expensive exact Riemann solver is normally required for computing numerical fluxes at the two-phase interfaces in addition to AUSM-type fluxes for single-phase interfaces in order to maintain stability and robustness in cases involving interactions of strong pressure and void-fraction discontinuities, a volume-fraction coupling term for the AUSM + -up fluxes is introduced in this work to impart the required robustness without the need of the exact Riemann solver. The resulting method is significantly less expensive in regions where otherwise the Riemann solver would be invoked. A transformation from conservative variables to primitive variables is presented and the primitive variables are then solved in the implicit method in order for the current finite volume method to be able to solve, effectively and efficiently, low Mach number flows in traditional multiphase applications, which otherwise is a great challenge for the standard density-based algorithms. Here, a number of benchmark test cases are presented to assess the performance and robustness of the developed finite volume method for both inviscid and viscous two-phase flow problems. The numerical results indicate that the current density-based method provides an attractive and viable alternative to its pressure-based counterpart for compressible two-phase flows at all speeds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An updated Lagrangian discontinuous Galerkin hydrodynamic method for gas dynamics

Here, we present a new Lagrangian discontinuous Galerkin (DG) hydrodynamic method for gas dynamics. The new method evolves conserved unknowns in the current configuration, which obviates the Jacobi matrix that maps the element in a reference coordinate system or the initial coordinate system to the current configuration. The density, momentum, and total energy (ρ, ρu, E ) are approximated with conservative higher-order Taylor expansions over the element and are limited toward a piecewise constant field near discontinuities using a limiter. Two new limiting methods are presented for enforcing the bounds on the primitive variables of density, velocity, and specific internal energy (ρ, u, e). The nodal velocity, and the corresponding forces, are calculated by solving an approximate Riemann problem at the element nodes. An explicit second-order method is used to temporally advance the solution. This new Lagrangian DG hydrodynamic method conserves mass, momentum, and total energy. 1D Cartesian coordinates test problem results are presented to demonstrate the accuracy and convergence order of the new DG method with the new limiters.

97 MATHEMATICS AND COMPUTING↗

Use of galerina marginata genes and proteins for peptide production

The present invention relates to compositions and methods comprising genes and peptides associated with cyclic peptides and cyclic peptide production in mushrooms. In particular, the present invention relates to using genes and proteins from Galerina species encoding peptides specifically relating to amatoxins in addition to proteins involved with processing cyclic peptide toxins. In a preferred embodiment, the present invention also relates to methods for making small peptides and small cyclic peptides including peptides similar to amanitin. Further, the present inventions relate to providing kits for making small peptides.

59 BASIC BIOLOGICAL SCIENCES↗

A reconstructed discontinuous Galerkin method for the compressible Navier-Stokes equations on three-dimensional hybrid grids

A reconstructed discontinuous Galerkin (rDG(P1P2)) method, originally introduced for the compressible Euler equations, is developed for the solution of the compressible Navier–Stokes equations on 3D hybrid grids. In this method, a piecewise quadratic polynomial solution is obtained from the underlying piecewise linear DG solution using a hierarchical Weighted Essentially Non-Oscillatory (WENO) reconstruction. The reconstructed quadratic polynomial solution is then used for the computation of the inviscid fluxes and the viscous fluxes using the second formulation of Bassi and Reay (Bassi–Rebay II). The developed rDG(P 1 P 2 ) method is used to compute a variety of flow problems to assess its accuracy, efficiency, and robustness. Additionally, the numerical results demonstrate that the rDG(P 1 P 2 ) method is able to achieve the designed third-order of accuracy at a cost slightly higher than its underlying second-order DG method, outperform the third order DG method in terms of both computing costs and storage requirements, and obtain reliable and accurate solutions to the direct numerical simulation (DNS) of compressible turbulent flows.

42 ENGINEERING↗

Use of Galerina marginata genes and proteins for peptide production

The present invention relates to compositions and methods comprising genes and peptides associated with cyclic peptides and cyclic peptide production in mushrooms. In particular, the present invention relates to using genes and proteins from Galerina species encoding peptides specifically relating to amatoxins in addition to proteins involved with processing cyclic peptide toxins. In a preferred embodiment, the present invention also relates to methods for making small peptides and small cyclic peptides including peptides similar to amanitin. Further, the present inventions relate to providing kits for making small peptides.

59 BASIC BIOLOGICAL SCIENCES↗

Identification and use of genes encoding amatoxin and phallotoxin

The present invention relates to compositions and methods comprising genes and peptides associated with cyclic peptide toxins and toxin production in mushrooms. In particular, the present invention relates to using genes and proteins from Amanita species encoding Amanita peptides, specifically relating to amatoxins and phallotoxins. In a preferred embodiment, the present invention also relates to methods for detecting Amanita peptide toxin genes for identifying Amanita peptide-producing mushrooms and for diagnosing suspected cases of mushroom poisoning. Further, the present inventions relate to providing kits for diagnosing and monitoring suspected cases of mushroom poisoning in patients.

59 BASIC BIOLOGICAL SCIENCES↗

A comparative study of Rosenbrock-type and implicit Runge-Kutta time integration for discontinuous Galerkin method for unsteady 3D compressible Navier-Stokes equations

A comparative study of two classes of third-order implicit time integration schemes is presented for a third-order hierarchical WENO reconstructed discontinuous Galerkin (rDG) method to solve the 3D unsteady compressible Navier-Stokes equations: — 1) the explicit first stage, single diagonally implicit Runge-Kutta (ESDIRK3) scheme, and 2) the Rosenbrock-Wanner (ROW) schemes based on the differential algebraic equations (DAEs) of Index-2. Compared with the ESDIRK3 scheme, a remarkable feature of the ROW schemes is that, they only require one approximate Jacobian matrix calculation every time step, thus considerably reducing the overall computational cost. A variety of test cases, ranging from inviscid flows to DNS of turbulent flows, are presented to assess the performance of these schemes. Here, numerical experiments demonstrate that the third-order ROW scheme for the DAEs of index-2 can not only achieve the designed formal order of temporal convergence accuracy in a benchmark test, but also require significantly less computing time than its ESDIRK3 counterpart to converge to the same level of discretization errors in all of the flow simulations in this study, indicating that the ROW methods provide an attractive alternative for the higher-order time-accurate integration of the unsteady compressible Navier-Stokes equations.

97 MATHEMATICS AND COMPUTING↗