Engineering Papers⌕ Search

Engineering topics

Ludtke, P. R.

Publications and source records attributed to Ludtke, P. R..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Cavitation characteristics of a small centrifugal pump in He I and He II

The cavitation characteristics of a small preinduced centrifugal pump operating in He I and He II over the temperature range 1.8-4.2 K are presented. The pump and close-coupled induction motor operate immersed in liquid helium. A six-blade propeller inducer and a three-blade screw inducer were both tested. With this pump configuration using either inducer, there is a tremendous difference between the cavitation characteristics of He I and He II. The net positive suction head requirements for this pump with the screw inducer could not be determined for He I, but it is less than -100 mm and, depending on flow rate, ranges between 35 and 165 mm for He II.

Ludtke, P. R.↗
NASA NTRS1988

Performance of a small centrifugal pump in He I and He II

The performance characteristics of a small centrifugal pump in He I and He II are determined over the temperature range of 1.6 to 4.2 K. The single-stage pump is powered by a close-coupled cryogenic induction motor. In the absence of cavitation, pump performance (head and capacity) was found to be identical for He I and He II. Developed heads up to 16 m and capacities of up to 900 liters/hr are obtained at 7000 rpm. A three-blade screw inducer was shown to require much less suction head than a six-blade propeller inducer.

Ludtke, P. R.↗
NASA NTRS1975

Register of hydrogen technology experts

This register presents the names of approximately 235 individuals who are considered experts, or very knowledgeable, in various fields of technology related to hydrogen. Approximately 90 organizations are represented. Each person is listed by organizational affiliation, address, and principal area of expertise. The criteria for selection of names for the register are extensive experience in a given field of work, participation in or supervision of relevant research programs, contributions to the literature, or being recognized as an expert in a particular field. The purpose of the register is to present, in easy form, sources of dependable information regarding highly technical areas of hydrogen technology, with particular emphasis on safety. The register includes two indexes: an alphabetical listing of the experts and an alphabetical listing of the organizations with which they are affiliated.

Ludtke, P. R.↗
NASA NTRS1975

Register of specialized sources for information on selected fuels and oxidizers

Thirty-eight (38) organizations are listed and described that catalog and file information in their data systems on fuel and oxidizers. The fuels include hydrogen, methane and hydrazine-type fuels; the oxidizers include oxygen, fluorine, flox, nitrogen tetroxide and ozone. The type of available information covers thermophysical properties, propellant systems, propellant fires-control-extinguishment, propellant explosions, propellant combustion, propellant safety, and fluorine chemistry. These organizations have assembled and collated their information so that it will be useful in the solution of engineering problems.

Ludtke, P. R.↗
NASA NTRS1973

Characteristics of slush and boiling methane and methane mixtures

Review of investigation results on the characteristics of slush (i.e., mixtures of liquid and solid) and boiling methane, and of binary mixtures of methane and other natural gas constituents, intended for use as fuels for high performance aircraft, rocket engines, and motor vehicles. The investigation extends to the characterization of slush prepared from pure methane and binary mixtures of methane with nitrogen, ethane, and propane, and the boiling properties of these mixtures.

Sindt, C. F.↗
NASA NTRS1971

A study of LC-39 cryogenic systems. Part 1: A study of the vacuum insulated transfer lines at Kennedy Space Center. Part 2: Cooldown pressure surges

The vacuum liquid hydrogen and liquid oxygen transfer lines at Kennedy Space Center were studied to evaluate the feasibility of using a condensing gas such as CO2 inside the vacuum spaces to achieve a condensing-vacuum. The study indicates that at ambient temperature, a maximum vacuum hyphen space pressure of 4000 microns is acceptable for the LH2 transfer lines. In addition, the cooldown procedures for the 14-inch cross-country liquid oxygen line was studied using a simplified mathematical model. Preliminary cooldown times are presented for various heat leak rates to the line and for two vent configurations.

Ludtke, P. R.↗
NASA NTRS1971

Characteristics of slush and boiling methane and methane mixtures.

Methane gas of two purities, 99.97% and 99%, was condensed to study the characteristics of the boiling liquid and the slush. In addition, binary mixtures of nitrogen and methane, and those of ethane and methane, and propane and methane, were also studied. Potential advantages of these gases when employed as fuels for high-performance aircraft, rocket engines, and motor vehicles are emphasized.

Sindt, C. F.↗