Engineering Papers⌕ Search

Engineering topics

Lucas, Donald

Publications and source records attributed to Lucas, Donald.

Deep Learning-based Non-Stationary Bias Correction (NSBC)

This work develops the NSBC (non-stationary bias correction) methodology to correct temperature projection bias from E3SM. The NSBC deep learning framework consists of a three-part architecture: an auto-encoder for compressing the spatial information, an LSTM for predicting annual temperature mean, and a U-Net for capturing the residual bias in temperature. The non-stationary bias correction (NSBC) framework can correct the non-stationarity of the biases of the climate models, which significantly improves the accuracy of future temperature prediction and improves the overestimation of extreme high temperatures that many existing bias correction methods suffer from. Getting started 1. Obtain the historical climate simulation and observation data. The E3SM simulation data are available through https://aims2.llnl.gov/search/cmip6/. The pseudo observations, the Geophysical Fluid Dynamics Laboratory (GFDL)-ESM4 model (Krasting et al., 2018) are available through https://aims2.llnl.gov/search/cmip6/. The spatial resolution of E3SM and pseudo observation datasets are both regridded to a common 1° resolution grid using conservative interpolation. The regridded E3SM and pseudo observation with 1° resolution can be found throught ./data/. 2. Train the Auto-encoder model. Python 0-autoencoder.py 3. Train the LSTM Python 1-LSTM.py 4. Generate the annual mean temperature based on trained LSTM Python 2-generate_annual_mean_LSTM.py 5. Train the U-Net. Python 3-unet.py 6. Evaluation and compared with the baseline Python 4_evaluation.py Is there a deadline approaching that requires the release of yo

Lucas, Donald↗

AI Automated Discovery of New Climate Water System Knowledge from Models and Observations

This paper addresses focus area 3, “Insight gleaned from complex data.” Science Challenge: The climate-water system is highly complex, containing a multitude of positive and negative feedbacks, time scales stretching many orders-of-magnitudes, and non-linear, connected processes. Powerful artificial intelligence (AI) methods can revolutionize and automate the discovery of new knowledge and relationships in the climate-water system, which will improve understanding and predictability of extreme hydrological events.

54 ENVIRONMENTAL SCIENCES↗

Autonomous reinforcement learning agents for improving predictions and observations of extreme climate events

Primary Focus Area: This proposal addresses focus area 2, “Predictive modeling through the use of AI techniques.” Science Challenge: Extreme climate events associated with severe weather, coastal and inland flooding, droughts, heat waves and wildfires are expected to increase in frequency and severity in the future. Due to the complexity and chaotic behavior of the climate system, accurately predicting and observing extreme climate events requires a tremendous amount of human intervention to run predictive climate simulations and deploy measurement systems. Extreme events often unfold very quickly, leaving little time to iterate on simulations or re-position instruments. Through reinforcement learning, autonomous AI agents can be designed to make real-time decisions to characterize extreme climate events more efficiently through adaptive models and targeted observations.

54 ENVIRONMENTAL SCIENCES↗

Inferring Atmospheric Release Characteristics in a Large Computer Experiment using Bayesian Adaptive Splines

An atmospheric release of hazardous material, whether accidental or intentional, can be catastrophic for those in the path of the plume. Predicting the path of a plume based on characteristics of the release (location, amount and duration) and meteorological conditions is an active research area highly relevant for emergency and long-term response to these releases. As a result, researchers have developed particle dispersion simulators to provide plume path predictions that incorporate release characteristics and meteorological conditions. However, since release characteristics and meteorological conditions are often unknown, the inverse problem is of great interest, that is, based on all the observations of the plume so far, what can be inferred about the release characteristics? This is the question we seek to answer using plume observations from a controlled release at the Diablo Canyon Nuclear Power Plant in Central California. With access to a large number of evaluations of a computationally expensive particle dispersion simulator that includes continuous and categorical inputs and spatio-temporal output, building a fast statistical surrogate model (or emulator) presents many statistical challenges, but is an essential tool for inverse modeling and sensitivity analysis. We achieve accurate emulation using Bayesian adaptive splines to model weights on empirical orthogonal functions. Here, we use this emulator as well as appropriately identifiable simulator discrepancy and observational error models to calibrate the simulator, thus finding a posterior distribution of characteristics of the release. Since the release was controlled, these characteristics are known, making it possible to compare our findings to the truth.

54 ENVIRONMENTAL SCIENCES↗

Localized surface plasmon resonance mercury detection system and methods

A mercury detection system that includes a flow cell having a mercury sensor, a light source and a light detector is provided. The mercury sensor includes a transparent substrate and a submonolayer of mercury absorbing nanoparticles, e.g., gold nanoparticles, on a surface of the substrate. Methods of determining whether mercury is present in a sample using the mercury sensors are also provided. The subject mercury detection systems and methods find use in a variety of different applications, including mercury detecting applications.

36 MATERIALS SCIENCE↗

Sensitivity of Precipitation to Parameter Values in the Community Atmosphere Model Version 5

One objective of the Climate Science for a Sustainable Energy Future (CSSEF) program is to develop the capability to thoroughly test and understand the uncertainties in the overall climate model and its components as they are being developed. The focus on uncertainties involves sensitivity analysis: the capability to determine which input parameters have a major influence on the output responses of interest. This report presents some initial sensitivity analysis results performed by Lawrence Livermore National Laboratory (LNNL), Sandia National Laboratories (SNL), and Pacific Northwest National Laboratory (PNNL). In the 2011-2012 timeframe, these laboratories worked in collaboration to perform sensitivity analyses of a set of CAM5, 2° runs, where the response metrics of interest were precipitation metrics. The three labs performed their sensitivity analysis (SA) studies separately and then compared results. Overall, the results were quite consistent with each other although the methods used were different. This exercise provided a robustness check of the global sensitivity analysis metrics and identified some strongly influential parameters.

54 ENVIRONMENTAL SCIENCES↗

NATURAL GAS VARIABILITY IN CALIFORNIA: ENVIRONMENTAL IMPACTS AND DEVICE PERFORMANCE EXPERIMENTAL EVALUATION OF POLLUTANT EMISSIONS FROM RESIDENTIAL APPLIANCES

The effect of liquefied natural gas on pollutant emissions was evaluated experimentally with used and new appliances in the laboratory and with appliances installed in residences, targeting information gaps from previous studies. Burner selection targeted available technologies that are projected to comprise the majority of installed appliances over the next decade. Experiments were conducted on 13 cooktop sets, 12 ovens, 5 broiler burners, 5 storage water heaters, 4 forced air furnaces, 1 wall furnace, and 6 tankless water heaters. Air-free concentrations and fuel-based emission factors were determined for carbon monoxide, nitrogen oxides, nitrogen dioxide, and the number of (predominantly ultrafine) particles over complete burns?including transient effects (device warm-up and intermittent firing of burners) following ignition--and during more stable end-of-burn conditions. Formaldehyde was measured over multi-burn cycles. The baseline fuel was Northern California line gas with Wobbe number (a measure of fuel energy delivery rate) of 1320-1340; test fuels had Wobbe numbers of roughly 1390 and 1420, and in some cases 1360. No ignition or operational problems were observed during test fuel use. Baseline emissions varied widely across and within burner groups and with burner operational mode. Statistically significant emissions changes were observed for some pollutants on some burners.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Carbon-centered free radicals in particulate matter emissions from wood and coal combustion

Electron paramagnetic resonance (EPR) spectroscopy was used to measure the free radicals in the particulate matter (PM) emissions from wood and coal combustion. The intensity of radicals in PM dropped linearly within two months of sample storage and stabilized after that. This factor of storage time was adjusted when comparing radical intensities among different PM samples. An inverse relationship between coal rank and free radical intensities in PM emissions was observed, which was in contrast with the pattern of radical intensities in the source coals. The strong correlation between intensities of free radical and elemental carbon in PM emissions suggests that the radical species may be carbon-centered. The increased g-factors, 2.0029-2.0039, over that of purely carbon-centered radicals may indicate the presence of vicinal oxygen heteroatom. The redox and biology activities of these carbon-centered radicals are worthy of evaluation. 22 refs., 4 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Nanoquartz in Late Permian C1 coal and the high incidence of female lung cancer in the Pearl River Origin area: a retrospective cohort study

Background: The Pearl River Origin area, Qujing District of Yunnan Province, has one of the highest female lung cancer mortality rates in China. Smoking was excluded as a cause of the lung cancer excess because almost all women were non-smokers. Crystalline silica embedded in the soot emissions from coal combustion was found to be associated with the lung cancer risk in a geographical correlation study. Lung cancer rates tend to be higher in places where the Late Permian C1 coal is produced. Therefore, we have hypothesized the two processes: C1 coal combustion --> nanoquartz in ambient air --> lung cancer excess in non-smoking women. Methods/Design: We propose to conduct a retrospective cohort study to test the hypothesis above. We will search historical records and compile an inventory of the coal mines in operation during 1930–2009. To estimate the study subjects' retrospective exposure, we will reconstruct the historical exposure scenario by burning the coal samples, collected from operating or deserted coal mines by coal geologists, in a traditional firepit of an old house. Indoor air particulate samples will be collected for nanoquartz and polycyclic aromatic hydrocarbons (PAHs) analyses. Bulk quartz content will be quantified by X-ray diffraction analysis. Size distribution of quartz will be examined by electron microscopes and by centrifugation techniques. Lifetime cumulative exposure to nanoquartz will be estimated for each subject. Using the epidemiology data, we will examine whether the use of C1 coal and the cumulative exposure to nanoquartz are associated with an elevated risk of lung cancer. Discussion: The high incidence rate of lung cancer in Xuan Wei, one of the counties in the current study area, was once attributed to high indoor air concentrations of PAHs. The research results have been cited for qualitative and quantitative cancer risk assessment of PAHs by the World Health Organization and other agencies. If nanoquartz is found to be the main underlying cause of the lung cancer epidemic in the study area, cancer potency estimates for PAHs by the international agencies based on the lung cancer data in this study setting should then be updated.

59 BASIC BIOLOGICAL SCIENCES↗

Matrix isolation infrared spectra of hydrogen halide and halogen complexes with nitrosyl halides

Matrix isolation infrared spectra of nitrosyl halide (XNO) complexes with HX and X2 (X = Cl, Br) are presented. The relative frequency shifts of the HX mode are modest (ClNO H-Cl, delta-nu/nu = -0.045; BrNO H-Br, delta-nu/nu = -0.026), indicating weak hydrogen bonds 1-3 kcal/mol. These shifts are accompanied by significant shifts to higher frequencies in the XN-O stretching mode (CIN-O HCl, delta-nu/nu = +0.016; BrN-O HBr, delta-nu/nu = +0.011). Similar shifts were observed for the XN-O X2 complexes (ClN-O Cl2, delta-nu/nu = +0.009; BrN-O-Br2, delta-nu/nu = +0.013). In all four complexes, the X-NO stretching mode relative shift is opposite in sign and about 1.6 times that of the NO stretching mode. These four complexes are considered to be similar in structure and charge distribution. The XN-O frequency shift suggests that complex formation is accompanied by charge withdrawal from the NO bond ranging from about .04 to .07 electron charges. The HX and X2 molecules act as electron acceptors, drawing electrons out of the antibonding orbital of NO and strengthening the XN-O bond. The implications of the pattern of vibrational shifts concerning the structure of the complexes are discussed.

Allamandola, Louis J.↗

Synchronized flash photolysis and pulse deposition in matrix isolation experiments

An apparatus is described which permits flash photolysis of a pulse-deposited gas mixture in a matrix isolation experiment. This technique obviates the limitations of in situ photolysis imposed by the cage effect and by secondary photolysis. The matrix is deposited in pulses at 30-s intervals and photolyzed sequentially by four synchronized flashlamps approximately 1 ms before the pulse strikes the cold surface. Pulsed deposition maintains adequate isolation and causes line narrowing, which enhances spectral sensitivity. The efficacy of flash photolysis combined with pulsed deposition for producing and trapping transient species was demonstrated by infrated detection of CF3 (from photolysis of CF3I/Ar mixtures) and of ClCO (from photolysis of Cl2/CO/Ar mixtures). The apparatus was used to study the photolytic decomposition of gaseous tricarbonylironcyclobutadiene, C4H4Fe(CO)3. The results indicate that the primary photolytic step is not elimination of C4H4, as suggested earlier, but rather of CO.

Allamandola, Louis J.↗