Engineering Papers⌕ Search

Engineering topics

Lu, Jun

Publications and source records attributed to Lu, Jun.

At least 109 records · Page 6

Nanotechnology for Sulfur Cathodes

The field of lithium-sulfur batteries has benefited enormously from the advances in nanotechnology. At each step of technological improvement, lithium-sulfur batteries have relied upon techniques and methodologies brought upon by nanotechnology. Nanoporous material, heterogeneous nanocomposite, and hierarchical electrode developments have all been well-established as critical milestones for lithium-sulfur batteries. Overall, this review will briefly discuss the specific major roles of nanotechnology in lithium-sulfur batteries regarding practically relevant testing conditions in addition to research trends and future directions for electrocatalysis.

25 ENERGY STORAGE↗

Process Engineering to Increase the Layered Phase Concentration in the Immediate Products of Flame Spray Pyrolysis

Flame-spray-pyrolysis (FSP) is a robust and scalable process to synthesize particles at the commodity-scale. FSP has been used to produce the precursor powders which were converted to the layered structure $(R\bar{3m} \text { phase})$ by a postannealing step in making nickel-rich cathode materials (NCMs). Theoretically, the high flame temperature (normally >1500 K) in FSP can provide adequate energy for the phase conversion from rock-salt to layered structures and potentially enables one-step synthesis. However, the high flame temperature is a critical issue to cause lithium loss and structural degradation, preventing the formation of the layered phase. Here, guided by the gaseous nucleation theory, we implemented several FSP processes with different solution recipes. The layered phase concentration in the as-burned products can be increased with the solution enthalpies. By adding a rapid quench step to suppress the lithium loss and phase degradation, the layered phase can be further increased. This work contributes new ideas to innovating process regarding the process efficiency and throughput of manufacturing cathode materials at a large scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designing inorganic electrolytes for solid-state Li-ion batteries: A perspective of LGPS and garnet

Solid state Li-ion batteries (SSLBs) are promising technologies for the next generation energy storage devices with higher energy density and enhanced safety. The solid state electrolyte (SSE) is a key component to deliver these desired electrochemical performance characteristics. Here we provide a brief review on the discovery, synthesis, structure, ion-conduction mechanism, and application of LGPS-type and garnet-type lithium ion conductors as two representative SSEs, aiming to extract principles for future design and discovery of favourable solid state Li-ion electrolytes for SSLBs. Recent advances in the strategies to address the challenges with respect to SSLBs are also discussed. Lastly, a perspective on the future research directions of SSLBs is provided.

25 ENERGY STORAGE↗

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li⁺-conducting cathode-electrolyte interphase

Ni-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes are investigated to realize high energy density Li ion batteries for long life electric vehicle applications. However, capacity decay and thermal instability due to cathode-electrolyte interfacial degradation remain challenges that require sophisticated surface stabilization methods to address. Here, we propose a strategy, for the first time, to form an artificial Li + -conducting cathode-electrolyte interphase (ALCEI) on the NCM811 cathode surface using a nucleophilic reaction between polysulfides and vinylene carbonate (VC). Furthemore, the as-formed ALCEI layer simultaneously protects the NCM particles from electrolyte corrosion and facilitates Li + ion transport, thus enabling stable and high rate cycling of NCM811. As a result, the ALCEI-modified NCM811 cathode exhibits a high capacity (211.6 mA h g -1 at 0.1C), notable rate capability (134 mA h g -1 at 10C), and superior cycle stability (94.2% over 200 cycles at 1C). These results underscore the use of interfacial engineering in high voltage cathode material development and provide a feasible strategy for stabilizing Ni-rich cathode interfaces in practical Li ion battery applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

(S)TEM-EELS as an advanced characterization technique for lithium-ion batteries

Although the lithium-ion battery (LIB) has acquired commercial success as a sustainable power source, it still suffers from multiple challenges for the future applications. In order to further develop next-generation batteries, the dynamics of structure change, charge transfer, and ion diffusion occurring inside the battery need to be deeply understood by advanced characterization techniques. (Scanning) transmission electron microscopy-electron energy loss spectroscopy ((S)TEM-EELS) is an effective method for the nano-scale detection of structural and chemical information in materials. Herein, this review systematically introduces the advantages and fundamentals of (S)TEM-EELS and its unique applications in LIBs.

25 ENERGY STORAGE↗

A miniaturized long-life acoustic transmitter for animal tracking in marine environments

Marine and hydrokinetic (MHK) energy devices are early-stage technologies and their impacts to ocean life and environment are largely unknown, which consequently limits the progress of deploying these devices at commercial scale. Optical and acoustic imaging have been the primary technologies for monitoring marine animals’ behavior at existing or potential MHK sites. However, these technologies lack the ability to identify individual animals, which makes them less useful in identifying protected species as well as studying the animals’ long-term behavior. Implantable acoustic transmitters with unique identification codes could be used as a complementary technology. To minimize the tag burden on the tagged animal (and hence the resulting bias) and to satisfy the long-term monitoring needs, it is desired that the implanted transmitter be as small and light as possible and can last for as long as possible. To date, the smallest acoustic transmitters suitable for marine animal tracking have relatively short service life and detection range (up to 200 m). In this report, we introduce a new miniaturized acoustic transmitter which operates at 208.3 kHz. It offers a smaller dry weight (0.45 g), a significantly longer service life (140 days at a 5-second ping rate) as well as a greater detection range than the existing commercial counterparts, which will help obtain more comprehensive movement and behavioral information of animals around MHK energy devices.

Li, Huidong↗

Correlating Catalyst Design and Discharged Product to Reduce Overpotential in Li-CO 2 Batteries

Li-CO 2 batteries with dual efficacy for greenhouse gas CO 2 sequestration and high energy output have been regarded as a promising electrochemical energy storage technology. However, battery feasibility has been hampered by inferior electrochemical performance due to large overpotentials and low cyclability primarily caused by the difficult decomposition of ultra-stable Li 2 CO 3 during charge. The use of cathode catalysts has been highlighted as a promising solution and catalyst properties, as well as the nature of discharge products, are closely correlated with electrochemical performance. Here, the catalyst design strategies that include active site enrichment, electrical transport enhancement, and mass transfer improvement are summarized. Catalyst effects on product decomposition are then subsequently introduced, while product geometry and chemical composition will be explored, with an emphasis on the formation/decomposition of Li 2 C 2 O 4 instead of Li 2 CO 3 . Building on previous research, future directions that facilitate improvements in catalyst design are put forward to reinforce the fundamental development of Li-CO 2 batteries.

25 ENERGY STORAGE↗

Rejuvenating dead lithium supply in lithium metal anodes by iodine redox

Inactive lithium (more frequently called dead lithium) in the forms of solid-electrolyte interphase and electrically isolated metallic lithium is principally responsible for the performance decay commonly observed in lithium metal batteries. A fundamental solution of recovering dead lithium is urgently needed to stabilize lithium metal batteries. In this paper, we quantify the solid-electrolyte interphase components, and determine their relation with the formation of electrically isolated dead lithium metal. We present a lithium restoration method based on a series of iodine redox reactions mainly involving I 3 - /I - . Using a biochar capsule host for iodine, we show that the I 3 - /I - redox takes place spontaneously, effectively rejuvenating dead lithium to compensate the lithium loss. Through this design, a full-cell using a very limited lithium metal anode exhibits an excellent lifespan of 1,000 cycles with a high Coulombic efficiency of 99.9%. We also demonstrate the design with a commercial cathode in pouch cells. Cycling lithium batteries often results in inactive lithium that no longer participates in redox reactions, leading to performance deterioration. Here the authors use an iodic species to react with inactive lithium, bringing it back to life and thus making batteries last longer.

25 ENERGY STORAGE↗

Autonomous sensor fish to support advanced hydropower development

An improved sensor fish with robust design and enhanced measurement capabilities. This sensor fish contains sensors for acceleration, rotation, magnetic field intensity, pressure, and temperature. A low-power microcontroller collects data from the sensors and stores up to 5 minutes of data on a non-volatile flash memory. A rechargeable battery supplies power to the sensor fish. A recovery system helps locating sensor fish. The package, when ready for use is nearly neutrally buoyant and thus mimics the behavior of an actual fish.

Deng, Z. Daniel↗

Whole-Voltage-Range Oxygen Redox in P2-Layered Cathode Materials for Sodium-Ion Batteries

Oxygen-redox of layer-structured metal-oxide cathodes has drawn great attention as an effective approach to break through the bottleneck of their capacity limit. However, reversible oxygen-redox can only be obtained in the high-voltage region (usually over 3.5 V) in current metal-oxide cathodes. Here, we realize reversible oxygen-redox in a wide voltage range of 1.5-4.5 V in a P2-layered Na 0.7 Mg 0.2 [Fe 0.2 Mn 0.6 $\square$0.2]O 2 cathode material, where intrinsic vacancies are located in transition-metal (TM) sites and Mg-ions are located in Na sites. Mg-ions in the Na layer serve as "pillars" to stabilize the layered structure during electrochemical cycling, especially in the high-voltage region. Intrinsic vacancies in the TM layer create the local configurations of "$\square$-O-$\square$", "Na-O-$\square$" and "Mg-O-$\square$" to trigger oxygen-redox in the whole voltage range of charge-discharge. Additionally, time-resolved techniques demonstrate that the P2 phase is well maintained in a wide potential window range of 1.5-4.5 V even at 10 C. It is revealed that charge compensation from Mn- and O-ions contributes to the whole voltage range of 1.5-4.5 V, while the redox of Fe-ions only contributes to the high-voltage region of 3.0-4.5 V. The orphaned electrons in the nonbonding 2p orbitals of O that point toward TM-vacancy sites are responsible for reversible oxygen-redox, and Mg-ions in Na sites suppress oxygen release effectively.

25 ENERGY STORAGE↗

Understanding Co roles towards developing Co-free Ni-rich cathodes for rechargeable batteries

Reduction on cobalt reliance is an urgent requirement in the development of sustainable cathode materials for Li-ion batteries. Here the authors analyse the roles of cobalt and its interplay with other ions in high-nickel layered oxides, and deduce a material formula for promising cobalt-free cathodes. Current bottlenecks in cobalt (Co) supply have negatively impacted commercial battery production and inspired the development of cathode materials that are less reliant on Co. However, complete Co elimination is prevented by the lack of fundamental understanding of the impact of Co on cathode capacity and structural stability, as well as the lack of effective substitute components in practice. Here we investigate the roles of Co in purposely designed systems that include both Co-rich and Mn-substituted Co-free cathodes. Our results affirmed that Co plays an undeniable role in fast capacity and/or structural degradation, and found that Co is more destructive than Ni at high potentials, which offers unexpected but encouraging perspectives for Co reduction. Moreover, Mn substitution effectively alleviates the destructive effects of Co and enables a high potential functionality. Finally, with these fundamental discoveries, we demonstrated a series of LiNi α Mn β X γ O 2 (X = single or multiple dopants) as a promising candidate for Co-free cathodes.

25 ENERGY STORAGE↗

Oxygen-deficient ammonium vanadate for flexible aqueous zinc batteries with high energy density and rate capability at -30 °C

Aqueous zinc batteries (AZBs) have received significant attention owing to environmental friendliness, high energy density and inherent safety. However, lack of high-performance cathodes has become the main bottleneck of AZBs development. Here, oxygen-deficient NH 4 V 4 O 10–x ·nH 2 O (NVOH) microspheres are synthesized and used as cathodes for AZBs. The experimental test and theoretical calculations demonstrate that the oxygen vacancies in the lattice lower the Zn 2+ diffusion energy barrier, which enables fast Zn 2+ diffusion and good electrochemical performance in a wide temperature range. The suppressed side reactions also can help to improve the low temperature performance. NVOH shows a high energy density of 372.4 Wh kg –1 and 296 Wh kg –1 at room temperature and –30 °C, respectively. Moreover, NVOH maintains a 100% capacity retention after 100 cycles at 0.1 A g –1 and ~94% capacity retention after 2600 cycles at 2 A g –1 and –30 °C. Investigation into the mechanism of the process reveals that the capacity contribution of surface capacitive behaviors is dominant and capacity attenuation is mainly caused by the decay of diffusion-controlled capacity. As a result, flexible AZBs can steadily power portable electronics under different bending states, demonstrating its great potential in wide-temperature wearable device.

25 ENERGY STORAGE↗

Lessons Learned From the Prototypes of the MQXFA Low-Beta Quadrupoles for HL-LHC and Status of Production in the US

With the successful test of the first two pre-series magnets the US HL-LHC Accelerator Upgrade Project has started production of the MQXFA magnets to be used in Q1/Q3 inner triplet elements of the HL-LHC. This good start comes after the test of two prototypes with limited performance, and it demonstrates the importance of learning from past issues. Therefore, in this paper we want to share the most important lessons learned so far, focusing on those which may be more interesting for similar projects. Additionally, we will present the status of MQXFA fabrication in the US.

43 PARTICLE ACCELERATORS↗

Atomic/molecular layer deposition for energy storage and conversion

Energy storage and conversion systems, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting, have played vital roles in the reduction of fossil fuel usage, addressing environmental issues and the development of electric vehicles. The fabrication and surface/interface engineering of electrode materials with refined structures are indispensable for achieving optimal performances for the different energy-related devices. Atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques, the gas-phase thin film deposition processes with self-limiting and saturated surface reactions, have emerged as powerful techniques for surface and interface engineering in energy-related devices due to their exceptional capability of precise thickness control, excellent uniformity and conformity, tunable composition and relatively low deposition temperature. In the past few decades, ALD and MLD have been intensively studied for energy storage and conversion applications with remarkable progress. In this work, we give a comprehensive summary of the development and achievements of ALD and MLD and their applications for energy storage and conversion, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting. Moreover, the fundamental understanding of the mechanisms involved in different devices will be deeply reviewed. Furthermore, the large-scale potential of ALD and MLD techniques is discussed and predicted. Finally, we will provide insightful perspectives on future directions for new material design by ALD and MLD and untapped opportunities in energy storage and conversion.

25 ENERGY STORAGE↗

In Situ Localized Polysulfide Injector for the Activation of Bulk Lithium Sulfide

The activation of commercial Li 2 S remains to be one of the key challenges against its commercialization as a starting cathode material for a sulfur-based Li-ion battery system. In this work we take advantage of the lower oxidation potential of commercial Na 2 S (1–3 wt%) to serve as an in situ and local polysulfide injector for the activation of commercial Li 2 S (70 wt%). Furthermore, in contrast to applying pre-solvated redox mediators, this technique allows for the activation of commercial Li 2 S at lower voltages with an electrolyte content as low as 3 μL mg –1 Li 2 S at 3 mgmg Li 2 S cm –2 and 4 μL mg –1 Li 2 S at 6.5 mg Li 2 S cm –2 without any other material modification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗