Engineering Papers⌕ Search

Engineering topics

Lu, Jun

Publications and source records attributed to Lu, Jun.

At least 289 records · Page 16

Construction of Hierarchically Porous Nanoparticles@Metal-Organic Frameworks Composites by Inherent Defects for the Enhancement of Catalytic Efficiency

Nanoparticles@metal-organic frameworks (MOFs) composites have attracted considerable attention in recent years due to the prominent selective catalytic activity. However, it is highly desirable to develop a simple and universal way to settle the trade-off between the catalytic efficiency and selectivity. Herein, by employing the thermal instability of inherent defects, hierarchically porous Pt@UiO-66-NH 2 , Pt@UiO-66, Pt@ZIF-8, and Au@ZIF-8 are successfully constructed after annealing at an appropriate temperature, respectively. The generated mesopores in the MOFs can be located around the external nanoparticle to retain the MOF shell for catalytic selectivity. Lastly, when tested in olefin hydrogenation, Pt@UiO-66-NH 2 shows significantly improved catalytic rate and enhanced dynamic selectivity.

36 MATERIALS SCIENCE↗

Nitrogen and sulfur co-doped porous carbon sheets for energy storage and pH-universal oxygen reduction reaction

Developing efficient electrocatalysts for energy storage and oxygen reduction reaction (ORR) is of great sig-nificance for the utilization of renewable energy. In particular, designing catalysts with both promising activityand long stability for ORR in pH-universal electrolytes still remain as a tremendous challenge. To tackle such aproblem, metal-free nitrogen and sulfur co-doped porous carbon sheet (NSPCS) was rationally designed in thiswork in order to integrate the two reported routes of enhancing the electrocatalytic activity of graphene. The as-prepared NSPCS has an onset potential of 0.89 V vs. RHE, and half-wave potential E1/2 ≈ 0.75 V during ORR inacidic solution, making it as the most active ORR catalyst. Moreover, the resulting NSPCS also shows a 0.03 Vpositive shift of half-wave potential than commercial Pt/C for ORR and excellent charge capacitive performancein alkaline media. Electron microscopy revealed high degree of defects on NSPCS surface. This, coupled withsynergistic doping effects of nitrogen and sulfur, optimized the active sites and charge transfer, rationalized theoutstanding performance in both oxygen reduction reactions and supercapacitors.Developing efficient electrocatalysts for energy storage and oxygen reduction reaction (ORR) is of great significance for the utilization of renewable energy. In particular, designing catalysts with both promising activity and long stability for ORR in pH-universal electrolytes still remain as a tremendous challenge. To tackle such a problem, metal-free nitrogen and sulfur co-doped porous carbon sheet (NSPCS) was rationally designed in this work in order to integrate the two reported routes of enhancing the electrocatalytic activity of graphene. The as-prepared NSPCS has an onset potential of 0.89 V vs. RHE, and half-wave potential E-1/2 approximate to 0.75 V during ORR in acidic solution, making it as the most active ORR catalyst. Moreover, the resulting NSPCS also shows a 0.03 V positive shift of half-wave potential than commercial Pt/C for ORR and excellent charge capacitive performance in alkaline media. Electron microscopy revealed high degree of defects on NSPCS surface. This, coupled with synergistic doping effects of nitrogen and sulfur, optimized the active sites and charge transfer, rationalized the outstanding performance in both oxygen reduction reactions and supercapacitors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Rate Performance and Ultralong Cycle Life Enabled by Hybrid Organic-Inorganic Vanadyl Ethylene Glycolate for Lithium-Ion Batteries

Transition metal oxides (TMOs) possess high theoretical capacity and serve as promising anode candidates for lithium-ion batteries. However, the intrinsic low conductivity handicaps the application of TMOs. Molecular modification by coupling TMOs structure with Li-ion conductive polymer ligands can facilitate the kinetics of electrochemical lithiation/delithiation process. Herein, a proof-of-concept investigation on the Li-ion storage capability by vanadyl ethylene glycolate (VEG) is achieved with the improvement of Li-ion diffusion kinetics by modifiying the vanadium oxide with organic ligands. In conclusion, VEG demonstrates unprecedented advantage for fast rate capability, stable cycleability, and high capacity at both room temperarture (25 °C) and elevated temperature (60 °C).

25 ENERGY STORAGE↗

A Lithium-Sulfur Battery using a 2D Current Collector Architecture with a Large-Sized Sulfur Host Operated under High Areal Loading and Low E/S Ratio

While backless freestanding 3-D electrode architectures for high loading sulfur batteries have flourished in the recent years, the more traditional and industrially turnkey 2-D architecture have not received the same amount of attention. In this paper, we report a spray dried sulfur composite with large intrinsic internal pores, ensuring adequate local electrolyte availability. This material offered good performance with a electrolyte content of 7 µL mg -1 at high areal loadings (5-8 mg cm -2 ), while also offering the first reported 2.8 µL mg -1 (8 mg cm -2 ) to enter into the 2nd plateau of discharge and continue to operate for 20 cycles. Furthermore, we provide evidence that the high frequency semi-circle (i.e. interfacial resistance) is mainly responsible for the often observed bypassing of the 2nd plateau in lean electrolyte discharges.

25 ENERGY STORAGE↗

A Critical Review on Superoxide-Based Sodium–Oxygen Batteries

Sodium superoxide (NaO 2 ) based sodium oxygen batteries (Na-O 2 ) possess high theoretical energy density and high energy efficiency that can be an alternative energy storage device to lithium ion batteries (LIBs). However, the state-of-the-art sodium oxygen batteries is still far from real application due to the limited understanding of the cell chemistry and reaction mechanism. In this mini review, we will review the recent advances on NaO 2 based Na-O 2 batteries, especially focusing on the reaction mechanism and the stability of NaO 2 . The parasitic reactions from the highly active NaO 2 will be discussed. We believe this review will provide insightful understanding on the mechanism and the role of the discharge product in NaO 2 batteries.

25 ENERGY STORAGE↗

Encapsulating Various Sulfur Allotropes within Graphene Nanocages for Long-Lasting Lithium Storage

The encapsulation of sulfur within carbon matrices is widely utilized in the cathode of a rechargeable lithium-sulfur battery, whose energy density largely depends on the design of the carbon structure. Here, an advanced graphene nanocage structure with the capability of hosting both cyclo-S-8 and smaller sulfur molecules (S2-4) is reported. The cage inner cavity is partially filled with S-8 to form a yolk-shell structure that enables free volumetric variation of S-8 during (de)lithiation. In the graphene shell of the cage, S-8 are downsized to S2-4 to activate extra sulfur loading sites within graphene layers. Importantly, the graphene shell exhibits inward volumetric variation upon (de)lithiation of the loaded S2-4, and the overall electrode strain is thus minimized. This prototyped design promises an ultimate solution to maximize sulfur loading in carbon matrices as well as to circumvent the polysulfide dissolution problem and boost the commercialization of lithium-sulfur batteries in the future.

Yuan, Yifei↗

Autonomous sensor fish to support advanced hydropower development

An improved sensor fish with robust design and enhanced measurement capabilities. This sensor fish contains sensors for acceleration, rotation, magnetic field intensity, pressure, and temperature. A low-power microcontroller collects data from the sensors and stores up to 5 minutes of data on a non-volatile flash memory. A rechargeable battery supplies power to the sensor fish. A recovery system helps locating sensor fish. The package, when ready for use is nearly neutrally buoyant and thus mimics the behavior of an actual fish.

Deng, Daniel Z.↗

Elevated‐Temperature 3D Printing of Hybrid Solid‐State Electrolyte for Li‐Ion Batteries

Abstract While 3D printing of rechargeable batteries has received immense interest in advancing the next generation of 3D energy storage devices, challenges with the 3D printing of electrolytes still remain. Additional processing steps such as solvent evaporation were required for earlier studies of electrolyte fabrication, which hindered the simultaneous production of electrode and electrolyte in an all‐3D‐printed battery. Here, a novel method is demonstrated to fabricate hybrid solid‐state electrolytes using an elevated‐temperature direct ink writing technique without any additional processing steps. The hybrid solid‐state electrolyte consists of solid poly(vinylidene fluoride‐hexafluoropropylene) matrices and a Li + ‐conducting ionic‐liquid electrolyte. The ink is modified by adding nanosized ceramic fillers to achieve the desired rheological properties. The ionic conductivity of the inks is 0.78 × 10 −3 S cm −1 . Interestingly, a continuous, thin, and dense layer is discovered to form between the porous electrolyte layer and the electrode, which effectively reduces the interfacial resistance of the solid‐state battery. Compared to the traditional methods of solid‐state battery assembly, the directly printed electrolyte helps to achieve higher capacities and a better rate performance. The direct fabrication of electrolyte from printable inks at an elevated temperature will shed new light on the design of all‐3D‐printed batteries for next‐generation electronic devices.

Cheng, Meng↗

In Situ Transmission Electron Microscopy Explores a New Nanoscale Pathway for Direct Gypsum Formation in Aqueous Solution

In the modern construction industry, large gypsum (CaSO 4 ·2H 2 O) boards are manufactured through a two-step procedure, which features the heating of fine gypsum powders to form the intermediate plaster of Paris (bassanite, CaSO 4 ·0.5H 2 O) followed by hydration of the intermediate phase to form the final formed product. Here, we explore a novel pathway toward the fabrication of gypsum microneedles that bypasses formation of the intermediate bassanite phase. Using in situ liquid transmission electron microscopy, the dynamic behavior of fine gypsum powders in a calcium sulfate solution is investigated at the nanoscale and in real time. An oriented-attachment mechanism is found to dominate the direct transformation of gypsum nanoparticles to gypsum microneedles, where no intermediate phases are involved. Our experimental results advance the fundamental understanding of the dynamic interactions between gypsum and water. The proposed nanoscale pathway for gypsum evolution could potentially revolutionize the construction industry rooted in gypsum board manufacturing by promising a time- and energy-efficient mass production procedure. Finally, in addition, this work can inspire research efforts associated with geology, archeology, and biology, where historical significance is frequently deduced from gypsum-related discoveries.

36 MATERIALS SCIENCE↗

Seeding Iron Trifluoride Nanoparticles on Reduced Graphite Oxide for Lithium-Ion Batteries with Enhanced Loading and Stability

Development of electric vehicles and portable electronic devices during the past decade calls for lithium-ion batteries (LIBs) with enhanced energy density and higher stability. Integration of FeF 3 phases and carbon structures leads to promising cathode materials for LIBs with high voltage, capacity, and power. In this study, FeF 3 ·0.33H 2 O nanoparticles were synthesized on reduced graphite oxide (rGO) nanosheets using an in situ approach. By chemically tuning the interfacial bonding between FeF 3 ·0.33H 2 O and rGO, we successfully achieved high particle loading and enhanced cycling stability. Specifically, a discharge capacity of ~208.3 mAh g –1 was observed at a current density of 0.5 C. The FeF 3 ·0.33H 2 O/rGO nanocomposites also demonstrate great cycle capability with a reversible discharge capacity of 133.1 mAh g –1 after 100 cycles at 100 mA g –1 ; the capacity retention is about 97%. Furthermore, this study provides an alternative strategy to further improve the stability and performance of iron fluoride/carbon nanocomposite materials for LIB applications.

25 ENERGY STORAGE↗

A Brief Review of Metallothermic Reduction Reactions for Materials Preparation

Metallothermic reduction reactions (MRRs) are displacement reactions that use reactive metals to reduce compounds so that metals, alloys, nonmetal elementary substances, and composites are produced, often in a scalable manner. In recent years, nonmetal materials, mainly silicon and carbon, particularly in their nanostructured forms obtained using an MRR with magnesium as the reductant, have started to attract much attention. However, reactions using other metals as the reductant have not been widely investigated yet. Furthermore, the reaction mechanisms and their controlling factors remain unclear, and much more effort is needed to advance this emerging field. Here, MRR preparation methods for metals, alloys, nanoporous silicon, nanoporous carbon, and composites are discussed as an introduction for new researchers in this field.

36 MATERIALS SCIENCE↗

Designing MOFs-Derived FeS 2 @Carbon Composites for High-Rate Sodium Ion Storage with Capacitive Contributions

We present that sodium-ion batteries suffer the disadvantages of poor rate performance and cycling stability due to its sluggish sodiation kinetics. A rational design strategy for both materials compositions and structures has been proposed to meet these challenges. Herein, a triple-component composite derived from metal organic frameworks, comprising FeS 2 , nitrogen sulfur co-doped porous carbon, and reduced graphene oxide (FeS 2 @NSC/G), has been successfully synthesized. With the capacities contributions from different sodium storage routes (diffusion-controlled processes and surface capacitive processes) at varies rate conditions, it is aiming to make full use of each component in the electrode composite and their unique porous structures. Expected electrode properties have been achieved and related electrochemical could behaviors have also been investigated. Finally, the strategy would present a promising thought for composites design, which enhance high-rate electrochemical energy storage performances.

25 ENERGY STORAGE↗

Structure-Guided Design and Procognitive Assessment of a Potent and Selective Phosphodiesterase 2A Inhibitor

In this paper we describe the development of a series of pyrazolopyrimidinone phosphodiesterase 2A (PDE2) inhibitors using structure-guided lead identification and design. The series was derived from informed chemotype replacement based on previously identified internal leads. The initially designed compound 3, while potent on PDE2, displayed unsatisfactory selectivity against the other PDE2 isoforms. Compound 3 was subsequently optimized for improved PDE2 activity and isoform selectivity. Insights into the origins of PDE2 selectivity are described and verified using cocrystallography. An optimized lead, 4, demonstrated improved performance in both a rodent and a nonhuman primate cognition model.

60 APPLIED LIFE SCIENCES↗

Acoustic transmission devices and process for making and using same

Acoustic tags and a process for fabrication are disclosed for identifying and tracking various hosts including inanimate and animate objects in up to three dimensions. The acoustic tags may be powered by a single power source. Tags can have an operation lifetime of up to 90 days or longer at a transmission rate of 3 seconds. The acoustic tags have an enhanced signal range that enhances detection probability when tracking the hosts.

47 OTHER INSTRUMENTATION↗

Injectable acoustic transmission devices and process for making and using same

Injectable acoustic tags and a process of making are described for tracking host animals in up to three dimensions. The injectable acoustic tags reduce adverse biological effects and have a reduced cost of manufacture compared with conventional surgically implanted tags. The injectable tags are powered by a single power source with a lifetime of greater than 30 days. The injectable tags have an enhanced acoustic signal transmission range that enhances detection probability for tracking of host animals.

47 OTHER INSTRUMENTATION↗

Strong Graphene 3D Assemblies with High Elastic Recovery and Hardness

The rational design and construction of 3D graphene assemblies is a crucial step to extend the graphene properties for practical applications. In this work, a novel interfacially reactive self-assembling process is reported to prepare well-organized 3D honeycomb-like graphene assemblies with unique polygonal nanopores interconnected by silicon-oxygen chemical bonds. The newly developed silicate-bridged graphene assembly (SGA) exhibits an exceptionally high hardness of 13.09 GPa, outperforming all existing 3D graphene materials, while maintains high Young’s modulus (162.96 GPa), elastic recovery (75.27%), and superb thermal stability (600 °C in air). The observed unusual merits are resulted from unique pore structure combining the mechanical stability of the trihedral-nanopore structure and the deformability of the other polygonal nanopores. As a filling material, a merely 0.05% (w/w) addition of SGA could double the impact resistance of unsaturated resins (e.g., polyester). While SGA is attractive for various applications, including body armors, wearable electronics, space elevators, and multifunctional reinforcement fibers for automobiles, and aerospace vehicles, the novel liquid sodium-water interfacial reactive self-assembling developed in this study could open avenues for further development of various well-defined 3D assemblies from graphene and many other materials.

36 MATERIALS SCIENCE↗