Engineering Papers⌕ Search

Engineering topics

Lu, Jun

Publications and source records attributed to Lu, Jun.

At least 217 records · Page 12

Challenges in Zinc Electrodes for Alkaline Zinc–Air Batteries: Obstacles to Commercialization

Alkaline zinc-air batteries are promising energy storage technologies with the advantages of low cost, ecological friendliness, and high energy density. However, the rechargeable zinc-air battery has not been used on a commercial scale because the zinc electrode suffers from critical problems such as passivation, dendrite growth, and hydrogen evolution reaction, which limit the practical applications of zinc-air batteries. Herein, the Perspective summaries the solutions to minimize the negative effects of zinc electrodes on discharge performance, cycling life, and shelf life. The future direction of academic research based on current studies of the existing challenges is proposed.

25 ENERGY STORAGE↗

High temperature shockwave stabilized single atoms

The stability of single-atom catalysts is critical for their practical applications. Although a high temperature can promote the bond formation between metal atoms and the substrate with an enhanced stability, it often causes atom agglomeration and is incompatible with many temperature-sensitive substrates. Here, we report using controllable high-temperature shockwaves to synthesize and stabilize single atoms at very high temperatures (1,500-2,000 K), achieved by a periodic on-off heating that features a short on state (55 ms) and a ten-times longer off state. The high temperature provides the activation energy for atom dispersion by forming thermodynamically favourable metal-defect bonds and the off-state critically ensures the overall stability, especially for the substrate. The resultant high-temperature single atoms exhibit a superior thermal stability as durable catalysts. In conclusion, the reported shockwave method is facile, ultrafast and universal (for example, Pt, Ru and Co single atoms, and carbon, C 3 N 4 and TiO 2 substrates), which opens a general route for single-atom manufacturing that is conventionally challenging.

42 ENGINEERING↗

Bamboo–Like Nitrogen–Doped Carbon Nanotube Forests as Durable Metal–Free Catalysts for Self–Powered Flexible Li–CO 2 Batteries

The Li-CO 2 battery is a promising energy storage device for wearable electronics due to its long discharge plateau, high energy density, and environmental friendliness. Furthermore, its utilization is largely hindered by poor cyclability and mechanical rigidity due to the lack of a flexible and durable catalyst electrode. Herein, flexible fiber-shaped Li-CO 2 batteries with ultralong cycle-life, high rate capability, and large specific capacity are fabricated, employing bamboo-like N-doped carbon nanotube fiber (B-NCNT) as flexible, durable metal-free catalysts for both CO 2 reduction and evolution reactions. Benefiting from high N-doping with abundant pyridinic groups, rich defects, and active sites of the periodic bamboo-like nodes, the fabricated Li-CO 2 battery shows outstanding electrochemical performance with high full-discharge capacity of 23328 mAh g -1 , high rate capability with a low potential gap up to 1.96 V at a current density of 1000 mA g -1 , stability over 360 cycles, and good flexibility. Meanwhile, the bifunctional B-NCNT is used as the counter electrode for a fiber-shaped dye-sensitized solar cell to fabricate a self-powered fiber-shaped Li-CO 2 battery with overall photochemical-electric energy conversion efficiency of up to 4.6%. Along with a stable voltage output, this design demonstrates great adaptability and application potentiality in wearable electronics with a breath monitor as an example.

25 ENERGY STORAGE↗

Manipulation of an ionic and electronic conductive interface for highly-stable high-voltage cathodes

A stable and conductive interface is one of the decisive factors in manipulating the performance of high voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) cathode for Li-ion batteries. Herein, a hybrid Li 3 PO 4 -TiO 2 coating layer is designed as an interfacial material via controllable atomic layer deposition (ALD) on LNMO. The coating acts not just as a physical barrier to prevent the side-reactions between cathode and electrolyte at high voltage, more importantly, the hybrid coating material improves both interfacial ionic and electronic conductivities to build facile Li-ion and electron diffusion pathways for LNMO. The optimized LNMO demonstrates improved rate capability and long-life stability. The capacity retention is 81.2% comparing with 47.4% of bare LNMO at 0.5C after 300 cycles. Detailed surface structural evolution is studied via X-ray absorption near edge spectroscopy and transmission electron microscopy. Furthermore, this work provides new insights of hybrid interfacial design via ALD and promotes novel electrode architectures for batteries.

25 ENERGY STORAGE↗

“Top-Down” Li Deposition Pathway Enabled by an Asymmetric Design for Li Composite Electrode

Designing Li composite electrodes with host frameworks for accommodating Li metal has been considered to be an effective approach to suppress Li dendrites. Herein, an asymmetric design of a Mo net/Li metal film (MLF) composite electrode is developed by an inverted thermal infusion method. The asymmetric MLF electrode has a dense oxide passivated layer on the top side, a porous Mo net matrix on the back side, and active Li layer in between. The back side has a larger specific area and higher electric field than the top side, which contacts with the separator upon cycling, triggering the preferred Li deposition and stripping of the porous back side of the electrode far from the separator. The surface passivation layer on the top side of the electrode as an artificial solid electrolyte interphase ensures the stable contact with the electrolyte and separator. Meanwhile, the porous structure of the supporting Mo net provides enough space for accommodating the volume change during Li deposition and stripping. This asymmetry design enables a unique “top down” growth pathway for Li deposition in the MLF electrode, suppressing the dendrite growth effectively. In conclusion, the design strategy provides a new direction for high-energy dendrite-free Li metal anodes.

25 ENERGY STORAGE↗

A Four‐Electron Sulfur Electrode Hosting a Cu 2+ /Cu + Redox Charge Carrier

Abstract The elemental sulfur electrode with Cu 2+ as the charge carrier gives a four‐electron sulfur electrode reaction through the sequential conversion of S↔CuS↔Cu 2 S. The Cu‐S redox‐ion electrode delivers a high specific capacity of 3044 mAh g −1 based on the sulfur mass or 609 mAh g −1 based on the mass of Cu 2 S, the completely discharged product, and displays an unprecedently high potential of sulfur/metal sulfide reduction at 0.5 V vs. SHE. The Cu‐S electrode also exhibits an extremely low extent of polarization of 0.05 V and an outstanding cycle number of 1200 cycles retaining 72 % of the initial capacity at 12.5 A g −1 . The remarkable utility of this Cu‐S cathode is further demonstrated in a hybrid cell that employs an Zn metal anode and an anion‐exchange membrane as the separator, which yields an average cell discharge voltage of 1.15 V, the half‐cell specific energy of 547 Wh kg −1 based on the mass of the Cu 2 S/carbon composite cathode, and stable cycling over 110 cycles.

Wu, Xianyong↗

Tuning Li 2 O 2 Formation Routes by Facet Engineering of MnO 2 Cathode Catalysts

In lithium-oxygen batteries, the solubility of LiO 2 intermediates in the electrolyte regulates the formation routes of the Li 2 O 2 discharge product. High-donor-number electrolytes with a high solubility of LiO 2 tend to promote the formation of Li 2 O 2 large particles following the solution route, which eventually benefits the cell capacity and cycle life. Here, we propose that facet engineering of cathode catalysts could be another direction in tuning the formation routes of Li 2 O 2 . In this work, fi-MnO 2 crystals with high occupancies of {111} or {100} facets were adopted as cathode catalysts in Li-O 2 batteries with a tetra(ethylene)glycol dimethyl ether electrolyte. The {111}-dominated beta-MnO 2 catalyzed the formation of the Li 2 O 2 discharge product into large toroids following the solution routes, while {100}-dominated beta-MnO 2 facilitated the formation of Li 2 O 2 thin films through the surface routes. Further computational studies indicate that the different formation routes of Li 2 O 2 could be related to different adsorption energies of LiO 2 on the two facets of beta-MnO 2 . Our results demonstrate that facet engineering of cathode catalysts could be a new way to tune the formation route of Li 2 O 2 in a low-donor-number electrolyte. Here, we anticipate that this new finding would offer more choices for the design of lithium-oxygen batteries with high capacities and ultimately a long cycle life.

25 ENERGY STORAGE↗

Reversible intercalation of methyl viologen as a dicationic charge carrier in aqueous batteries

The interactions among charge carriers and electrode structures represent one of the most important considerations in the search for new energy storage devices. Currently, ionic bonding dominates the battery chemistry. In this work we report the reversible insertion of a large molecular dication, methyl viologen, into the crystal structure of an aromatic solid electrode, 3,4,9,10-perylenetetracarboxylic dianhydride. This is the largest insertion charge carrier when non-solvated ever reported for batteries; surprisingly, the kinetic properties of the (de) insertion of methyl viologen are excellent with 60% of capacity retained when the current rate is increased from 100 mA g -1 to 2000 mA g -1 . Characterization reveals that the insertion of methyl viologen causes phase transformation of the organic host, and embodies guest-host chemical bonding. First-principles density functional theory calculations suggest strong guest-host interaction beyond the pure ionic bonding, where a large extent of covalency may exist. This study extends the boundary of battery chemistry to large molecular ions as charge carriers and also highlights the electrochemical assembly of a supramolecular system.

25 ENERGY STORAGE↗

Evaluation of a fish-friendly self-cleaning horizontal irrigation screen using autonomous sensors

Irrigation modernisation is booming globally because of the increasing demand on water and food. However, irrigation infrastructures can injure fish or entrain them into irrigation water. Screening is an effective method to mitigate fish entrainment. In this study, two autonomous sensor devices, developed and manufactured at Pacific Northwest National Laboratory (Sensor Fish and its miniaturised version, Sensor Fish Mini) were deployed to evaluate the physical and fish passage conditions of a unique horizontal, flat-plate fish and debris screen (known as the Farmers Screen) that was installed in Oregon, USA. Only 1 of the 27 Sensor Fish Mini releases had a severe acceleration event, whereas 0 of the 37 Sensor Fish releases had severe events. The rates of severe events and amplitudes of accelerations at the Farmers Screen were significantly lower than those at other hydraulic structures, including a fish-friendly surface weir that recorded nearly 100% fish survival. Overall, the results indicated that the Farmers Screens can provide safe downstream passage for fish at irrigation diversions. This study also demonstrated that the Sensor Fish technology, including Sensor Fish Mini, is a suitable technology for evaluating irrigation structures and providing important information for the development of sustainable irrigation.

47 OTHER INSTRUMENTATION↗

A Four-Electron Sulfur Electrode Hosting a Cu 2+ /Cu + Redox Charge Carrier

The elemental sulfur electrode with Cu 2+ as the charge carrier gives a four–electron sulfur electrode reaction through the sequential conversion of S↔CuS↔Cu 2 S. The Cu–S redox–ion electrode delivers a high specific capacity of 3044 mAh g –1 based on the sulfur mass or 609 mAh g –1 based on the mass of Cu 2 S, the completely discharged product, and displays an unprecedently high potential of sulfur/metal sulfide reduction at 0.5 V vs. SHE. The Cu–S electrode also exhibits an extremely low extent of polarization of 0.05 V and an outstanding cycle number of 1200 cycles retaining 72 % of the initial capacity at 12.5 A g –1 . Here, the remarkable utility of this Cu–S cathode is further demonstrated in a hybrid cell that employs an Zn metal anode and an anion–exchange membrane as the separator, which yields an average cell discharge voltage of 1.15 V, the half–cell specific energy of 547 Wh kg –1 based on the mass of the Cu 2 S/carbon composite cathode, and stable cycling over 110 cycles.

25 ENERGY STORAGE↗

Structural defects on converted bismuth oxide nanotubes enable highly active electrocatalysis of carbon dioxide reduction

Formic acid (or formate) is suggested to be one of the most economically viable products from electrochemical carbon dioxide reduction. However, its commercial viability hinges on the development of highly active and selective electrocatalysts. Here we report that structural defects have a profound positive impact on the electrocatalytic performance of bismuth. Bismuth oxide double-walled nanotubes with fragmented surface are prepared as a template, and are cathodically converted to defective bismuth nanotubes. This converted electrocatalyst enables carbon dioxide reduction to formate with excellent activity, selectivity and stability. Most significantly, its current density reaches ~288 mA cm -2 at -0.61 V versus reversible hydrogen electrode within a flow cell reactor under ambient conditions. Using density functional theory calculations, the excellent activity and selectivity are rationalized as the outcome of abundant defective bismuth sites that stabilize the *OCHO intermediate. Furthermore, this electrocatalyst is coupled with silicon photocathodes and achieves high-performance photoelectrochemical carbon dioxide reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into Structural Evolution of Lithium Peroxides with Reduced Charge Overpotential in Li–O 2 System

Reducing charge-discharge overpotential is of great significance to enhance efficiency and cyclability of Li–O 2 batteries. Here we successfully achieve dramatically reduced charge overpotential (0.4 V) via a rational design of cathode architecture, which features highly uniform Pt and Pt 3 Co nanocrystals embedding within nitrogen-doped cobalt@graphene heterostructures. Because of the improvement on the catalytic efficiency for optimizing the electrical and dynamic properties, the cathode design enables promising electrochemical performance. More importantly, the results reveal different overpotential prompted by different structural evolution of bulk Li 2 O 2 , which depends on the Pt modification approach (surface-coating and bulk-doping). This dependence is found to be attributed to the influence of Pt nanocomponents and their dispersion on the formation and decomposition mechanism of Li 2 O 2 . Density functional theory calculations provide mechanistic insights into the promotional effect of Pt and Pt 3 Co on the reduction of the charge overpotential. Lastly, an inner relationship between overpotential and electrochemical kinetics is proposed.

25 ENERGY STORAGE↗

Exploring the charge reactions in a Li–O 2 system with lithium oxide cathodes and nonaqueous electrolytes

Nonaqueous lithium–oxygen batteries have attracted considerable attention due to their high energy density. Huge efforts have been made to unravel the fundamentals of Li–O 2 battery chemistry. However, current Li–O 2 batteries still suffer from several unresolved problems such as the instability of electrolytes and sluggish oxidation of lithium oxides during the charging process. In this paper, we propose a detailed study to investigate the charge mechanism of lithium oxide materials in different electrolytes. Commercially available lithium peroxide and lithium oxide have been employed as cathodes to determine how lithium oxides (both lithium oxide and lithium peroxide) and electrolytes change during charge. Lastly, the result shows that Li 2 O 2 decomposed to lithium and oxygen; meanwhile, the electrolyte has a significant influence on Li 2 O 2 decomposition. Furthermore, while most of the Li 2 O material participates in side reactions with the electrolyte, some of it is found to delithiate and crumble in structure.

36 MATERIALS SCIENCE↗

A Single‐Atom Iridium Heterogeneous Catalyst in Oxygen Reduction Reaction

Abstract Combining the advantages of homogeneous and heterogeneous catalysts, single‐atom catalysts (SACs) are bringing new opportunities to revolutionize ORR catalysis in terms of cost, activity and durability. However, the lack of high‐performance SACs as well as the fundamental understanding of their unique catalytic mechanisms call for serious advances in this field. Herein, for the first time, we develop an Ir‐N‐C single‐atom catalyst (Ir‐SAC) which mimics homogeneous iridium porphyrins for high‐efficiency ORR catalysis. In accordance with theoretical predictions, the as‐developed Ir‐SAC exhibits orders of magnitude higher ORR activity than iridium nanoparticles with a record‐high turnover frequency (TOF) of 24.3 e − site −1 s −1 at 0.85 V vs. RHE) and an impressive mass activity of 12.2 A mg −1 Ir , which far outperforms the previously reported SACs and commercial Pt/C. Atomic structural characterizations and density functional theory calculations reveal that the high activity of Ir‐SAC is attributed to the moderate adsorption energy of reaction intermediates on the mononuclear iridium ion coordinated with four nitrogen atom sites.

Xiao, Meiling↗

A Single‐Atom Iridium Heterogeneous Catalyst in Oxygen Reduction Reaction

Abstract Combining the advantages of homogeneous and heterogeneous catalysts, single‐atom catalysts (SACs) are bringing new opportunities to revolutionize ORR catalysis in terms of cost, activity and durability. However, the lack of high‐performance SACs as well as the fundamental understanding of their unique catalytic mechanisms call for serious advances in this field. Herein, for the first time, we develop an Ir‐N‐C single‐atom catalyst (Ir‐SAC) which mimics homogeneous iridium porphyrins for high‐efficiency ORR catalysis. In accordance with theoretical predictions, the as‐developed Ir‐SAC exhibits orders of magnitude higher ORR activity than iridium nanoparticles with a record‐high turnover frequency (TOF) of 24.3 e − site −1 s −1 at 0.85 V vs. RHE) and an impressive mass activity of 12.2 A mg −1 Ir , which far outperforms the previously reported SACs and commercial Pt/C. Atomic structural characterizations and density functional theory calculations reveal that the high activity of Ir‐SAC is attributed to the moderate adsorption energy of reaction intermediates on the mononuclear iridium ion coordinated with four nitrogen atom sites.

Xiao, Meiling↗

Fast and selective fluoride ion conduction in sub-1-nanometer metal-organic framework channels

Biological fluoride ion channels are sub-1-nanometer protein pores with ultrahigh F - conductivity and selectivity over other halogen ions. Developing synthetic F - channels with biological-level selectivity is highly desirable for ion separations such as water defluoridation, but it remains a great challenge. Here we report synthetic F - channels fabricated from zirconium-based metal-organic frameworks (MOFs), UiO-66-X ( x = H, NH 2 , and N + (CH 3 ) 3 ). These MOFs are comprised of nanometer-sized cavities connected by sub-1-nanometer-sized windows and have specific F - binding sites along the channels, sharing some features of biological F - channels. UiO-66-X channels consistently show ultrahigh F - conductivity up to ~10 S m -1 , and ultrahigh F - /Cl - selectivity, from ~13 to ~240. Molecular dynamics simulations reveal that the ultrahigh F - conductivity and selectivity can be ascribed mainly to the high F - concentration in the UiO-66 channels, arising from specific interactions between F - ions and F - binding sites in the MOF channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗