A Prototypical Workflow for Grid-to-Rod Fretting Analysis with Hydra-TH
Abstract Not Provided
Engineering topics
Publications and source records attributed to Lowrie, Robert B.
Abstract Not Provided
No abstract prepared.
Progress is reported on computational capabilities for the grid-to-rod-fretting (GTRF) problem of pressurized water reactors. Numeca's Hexpress/Hybrid mesh generator is demonstrated as an excellent alternative to generating computational meshes for complex flow geometries, such as in GTRF. Mesh assessment is carried out using standard industrial computational fluid dynamics practices. Hydra-TH, a simulation code developed at LANL for reactor thermal-hydraulics, is demonstrated on hybrid meshes, containing different element types. A series of new Hydra-TH calculations has been carried out collecting turbulence statistics. Preliminary results on the newly generated meshes are discussed; full analysis will be documented in the L3 milestone, THM.CFD.P5.05, Sept. 2012.
This talk presents an overview of the multiphase flow efforts with Hydra-TH. The presentation begins with a definition of the requirements and design principles for multiphase flow relevant to CASL-centric problems. A brief survey of existing codes and their solution algorithms is presented before turning the model formulation selected for Hydra-TH. The issues of hyperbolicity and wellposedness are outlined, and a three candidate solution algorithms are discussed. The development status of Hydra-TH for multiphase flow is then presented with a brief summary and discussion of future directions for this work.
Abstract Not Provided
Abstract Not Provided
This talk will describe the technical direction of the Thermal-Hydraulics (T-H) Project within the Consortium for Advanced Simulation of Light Water Reactors (CASL) Department of Energy Innovation Hub. CASL is focused on developing a 'virtual reactor', that will simulate the physical processes that occur within a light-water reactor. These simulations will address several challenge problems, defined by laboratory, university, and industrial partners that make up CASL. CASL's T-H efforts are encompassed in two sub-projects: (1) Computational Fluid Dynamics (CFD), (2) Interface Treatment Methods (ITM). The CFD subproject will develop non-proprietary, scalable, verified and validated macroscale CFD simulation tools. These tools typically require closures for their turbulence and boiling models, which will be provided by the ITM sub-project, via experiments and microscale (such as DNS) simulation results. The near-term milestones and longer term plans of these two sub-projects will be discussed.
We present a second order non-linearly consistent implicit/explicit (methods that use com- bination of implicit/explicit discretizations are often referred to as IMEX (IMplicit/EXplicit) methods [2,1,3]) time integration technique for solving radiation hydrodynamics problems. The idea is to hybridize an implicit and an explicit discretization in a nonlinearly consis- tent way in order to achieve second order time convergent calculations. In this scope, the hydrodynamics equations are discretized explicitly making use of the capability of well- understood explicit schemes. On the other hand , the radiation diffusion part is solved implicitly. In the view of the non-linearly consistent IMEX method, the hydrodynamics equations are solved as part of the non-linear function evaluation within the framework of the Jacobian-Free Newton Krylov (JFNK) method [16,14]. This is to avoid order reductions in time convergence due to the operator splitting. We present results from several test prob- lems in order to validate the numerical order of the scheme. For each test, we established second order time convergence.
We compare a staggered Lagrangian formulation with a cell-centered Lagrangian formulation for a two-material compressible flow. In both formulation, we assume a single velocity field and rely on pressure relaxation techniques to close the system of equations. We employ Tipton's mixture model for both formulation. However, for the cell-centered formulation, employing Tipton's model for the mixture cell results in loss of conservation of total energy. We propose a numerical algorithm to correct this energy discrepancy. We test both algorithms on the two-materials Sod shock tube test problem and compare the results with the analytical solution.
The Fokker-Planck equation is a widely used approximation for modeling the Compton scattering of photons in high energy density applications. In this paper, we perform a stability analysis of three implicit time discretizations for the Compton-Scattering Fokker-Planck equation. Specifically, we examine (i) a Semi-Implicit (SI) scheme that employs backward-Euler differencing but evaluates temperature-dependent coefficients at their beginning-of-time-step values, (ii) a Fully Implicit (FI) discretization that instead evaluates temperature-dependent coefficients at their end-of-time-step values, and (iii) a Linearized Implicit (LI) scheme, which is developed by linearizing the temperature dependence of the FI discretization within each time step. Our stability analysis shows that the FI and LI schemes are unconditionally stable and cannot generate oscillatory solutions regardless of time-step size, whereas the SI discretization can suffer from instabilities and nonphysical oscillations for sufficiently large time steps. With the results of this analysis, we present time-step limits for the SI scheme that prevent undesirable behavior. We test the validity of our stability analysis and time-step limits with a set of numerical examples.
We perform a stability analysis of a Monte Carlo method for simulating the Compton scattering of photons by free electron in high energy density applications and develop time-step limits that avoid unstable and oscillatory solutions. Implementing this Monte Carlo technique in multi physics problems typically requires evaluating the material temperature at its beginning-of-time-step value, which can lead to this undesirable behavior. With a set of numerical examples, we demonstrate the efficacy of our time-step limits.
We study the structure of planar shock waves in a two-temperature model of a fully ionized plasma that includes electron heat conduction and energy exchange between electrons and ions. For steady flow in a reference frame moving with the shock, the model reduces to an autonomous system of ordinary differential equations which can be numerically integrated. A phase space analysis of the ODEs provides additional insight into the structure of the solutions. For example, below a threshold mach number the model produces fully dispersed shocks; while above another threshold mach number, the solutions contain embedded hydrodynamic shocks. Between these two threshold values, the appearance of embedded shocks depends on the electron diffusivity and the electron-ion coupling term. We also find that the ion temperature may continue to increase after the shock and reaches a maximum near the isothermal sonic point. We summarize the methodology for solving for two-temperature shocks, and show results for several values of shock strength and material parameters to quantify the shock structure and explore the range of possible solutions. Such solutions may be used to verify hydrodynamic codes that use similar plasma physics models.
Many hyperbolic systems of equations with stiff relaxation terms reduce to a parabolic description when relaxation dominates. An asymptotic-preserving numerical method is a discretization of the hyperbolic system that becomes a valid discretization of the parabolic system in the asymptotic limit. We explore the consequences of applying a slope limiter to the discontinuous Galerkin (DG) method, with linear elements, for hyperbolic systems with stiff relaxation terms. Without a limiter, the DG method gives an accurate discretization of the Chapman-Enskog approximation of the system when the relaxation length scale is not resolved. It is well known that the first-order upwind (or 'step') method fails to obtain the proper asymptotic limit. We show that using the minmod slope limiter also fails, but that using double minmod gives the proper asymptotic limit. Despite its effectiveness in the asymptotic limit, the double minmod limiter allows artificial extrema at cell interfaces, referred to as 'sawteeth'. We present a limiter that eliminates the sawteeth, but maintains the proper asymptotic limit. The systems that we analyze are the hyperbolic heat equation and the P{sub n} thermal radiation equations. Numerical examples are used to verify our analysis.
Implicit time integration involving the solution of large systems of equations is the current paradigm for time-dependent radiative transfer. In this paper we present a semi-implicit, linear discontinuous Galerkin method for the spherical harmonics (P{sub N}) equations for thermal radiative transfer in planar geometry. Our method is novel in that the material coupling terms are treated implicitly (via linearizing the emission source) and the streaming operator is treated explicitly using a second-order accurate Runge-Kutta method. The benefit of this approach is that each time step only involves the solution of equations that are local to each cell. This benefit comes at the cost of having the time step limited by a CFL condition based on the speed of light. To guarantee positivity and avoid artificial oscillations, we use a slope-limiting technique. We present analysis and numerical results that show the method is robust in the diffusion limit when the photon mean-free path is not resolved by the spatial mesh. Also, in the diffusion limit the time step restriction relaxes to a less restrictive explicit diffusion CFL condition. We demonstrate with numerical results that away from the diffusion limit our method demonstrates second-order error convergence as the spatial mesh is refined with a fixed CFL number.
Volume tracking method, also referred to as the volume-of-fluid (VOF) method introduces 'numerical surface tension' that breaks a filament into a series of droplets whenever the filament is under-resolved. Adaptive mesh refinement can help avoid under-resolution, but a fully-developed flow will still generate filaments that cannot be resolved without enormous computational cost. We propose a complementary new approach that consists of transitioning to a continuous interface representation (i.e. without interface reconstruction) in regions of under-resolved interfacial curvature where volume tracking has become erroneous. The price of the continuous interface treatment is a small amount of numerica'l mass diffusion, even if the physical interface is immiscible. However, we have found that for certain measures, the overall accuracy is greatly improved by using our transitioning algorithm. The algorithm is developed in the context of the single fluid formulation of the incompressible Navier-Stokes equations. Numerical standard vortices advection test cases and Rayleigh-Taylor instability computations are presented to illustrate the transition algorithm potential.
We present recent progress in the development of two substantially different approaches for simulating the so-called of P{sub N} equations. These are linear hyperbolic systems of PDEs that are used to model particle transport in a material medium, that in highly collisional regimes, are accurately approximated by a simple diffusion equation. This limit is based on a balance between function values and gradients of certain variables in the P{sub N} system. Conventional reconstruction methods based on upwinding approximate such gradients with an error that is dependent on the size of the computational mesh. Thus in order to capture the diffusion limit, a given mesh must resolve the dynamics of the continuum equation at the level of the mean-free-path, which tends to zero in the diffusion limit. The two methods analyzed here produce accurate solutions in both collisional and non-collisional regimes; in particular, they do not require resolution of the mean-free-path in order to properly capture the diffusion limit. The first method is a straight-forward application of the discrete Galerkin (DG) methodology, which uses additional variables in each computational cell to capture the balance between function values and gradients, which are computed locally. The second method uses a temporal splitting of the fast and slow dynamics in the P{sub N} system to derive so-called regularized equations for which the diffusion limit is built-in. We focus specifically on the P{sub N} equations for one-dimensional, slab geometries. Preliminary results for several benchmark problems are presented which highlight the advantages and disadvantages of each method. Further improvements and extensions are also discussed.
No abstract prepared.