Engineering PapersSearch

Engineering topics

Lovelady, R. W.

Publications and source records attributed to Lovelady, R. W..

Fabricating Underwater Electroacoustic Transducers

Use of retainer ring instead of adhesives simplifies assembly and disassembly. Underwater electroacoustical transducer assembly uses precast silicone rubber compressed between ceramic crystal and metal container. Removable retainer ring holds assembly in place. Method provides proper stress loading, speed and ease of assembly, and way of removing transducer without damaging crystal.

Ferguson, R. L.

A review of underwater acoustic systems and methods for locating objects lost at sea

Information related to the location of objects lost at sea is presented. Acoustic devices attached to an object prior to being transported is recommended as a homing beacon. Minimum requirements and some environmental constraints are defined. Methods and procedures for search and recovery are also discussed. Both an interim system and a more advanced system are outlined. Controlled acoustic emission to enhance security is the theme followed.

Lovelady, R. W.

Design, development, and field demonstration of a remotely deployable water quality monitoring system

A prototype water quality monitoring system is described which offers almost continuous in situ monitoring. The two-man portable system features: (1) a microprocessor controlled central processing unit which allows preprogrammed sampling schedules and reprogramming in situ; (2) a subsurface unit for multiple depth capability and security from vandalism; (3) an acoustic data link for communications between the subsurface unit and the surface control unit; (4) eight water quality parameter sensors; (5) a nonvolatile magnetic bubble memory which prevents data loss in the event of power interruption; (6) a rechargeable power supply sufficient for 2 weeks of unattended operation; (7) a water sampler which can collect samples for laboratory analysis; (8) data output in direct engineering units on printed tape or through a computer compatible link; (9) internal electronic calibration eliminating external sensor adjustment; and (10) acoustic location and recovery systems. Data obtained in Saginaw Bay, Lake Huron are tabulated.

Wallace, J. W.

Implantable acoustic-beacon automatic fish-tracking system

A portable automatic fish tracking system was developed for monitoring the two dimensional movements of small fish within fixed areas of estuarine waters and lakes. By using the miniature pinger previously developed for this application, prototype tests of the system were conducted in the York River near the Virginia Institute of Marine Science with two underwater listening stations. Results from these tests showed that the tracking system could position the miniature pinger signals to within + or - 2.5 deg and + or - 135 m at ranges up to 2.5 km. The pingers were implanted in small fish and were successfully tracked at comparable ranges. No changes in either fish behavior or pinger performance were observed as a result of the implantation. Based on results from these prototype tests, it is concluded that the now commercially available system provides an effective approach to underwater tracking of small fish within a fixed area of interest.

Mayhue, R. J.

Acoustic tracking of woodhead seabed drifters

An investigation was conducted to determine the feasibility of tracking Woodhead seabed drifters that were instrumented with miniature acoustic transmitters having a range in water in excess of 1.0 n.mi. A trial cruise at the entrance of Delaware Bay, with the R.V. Annandale as the sonar-tracking vessel, verified acoustic communications and positioning of the bottom drifters. A demonstration cruise with the R.V. Annandale was also performed in the New York Bight to attempt to collect information on bottom water movement near the sewage-sluge dump site. Results from the tracking mission in the New York Bight suggested that bottom water currents were negligible near the dump site during the time interval from November 7-12, 1975, and that shipboard sonar tracking of acoustic Woodhead seabed drifters could provide useful Lagragian information on bottom water movement caused by tidal and other nonstorm effects.

Mayhue, R. J.

Automatic electronic fish tracking system

A newly developed electronic fish tracking system to automatically monitor the movements and migratory habits of fish is reported. The system is aimed particularly at studies of effects on fish life of industrial facilities which use rivers or lakes to dump their effluents. Location of fish is acquired by means of acoustic links from the fish to underwater Listening Stations, and by radio links which relay tracking information to a shore-based Data Base. Fish over 4 inches long may be tracked over a 5 x 5 mile area. The electronic fish tracking system provides the marine scientist with electronics which permit studies that were not practical in the past and which are cost-effective compared to manual methods.

Osborne, P. W.

Miniature sonar fish tag

Self-powered sonar device may be implanted in body of fish. It transmits signal that can be detected with portable tracking gear or by automatic detection-and-tracking system. Operating life of over 4000 hours may be expected. Device itself may be used almost indefinitely.

Lovelady, R. W.

System locates randomly placed remote objects

System to locate objects submerged underwater uses active/passive sonar techniques in which a transmitter is attached to the object to be recovered and a receiver is used for search. The system is rugged, has a long term operating life, and furnishes a precise bearing on the object.

Lovelady, R. W.