Engineering PapersSearch

Engineering topics

Love, S. G.

Publications and source records attributed to Love, S. G..

Shock Temperatures in Calcite at 115 to 185 GPa

We present optical pyrometer measurements of shock temperatures in crystalline calcite (CaC03) which constrain its behavior in shock waves with amplitudes of 115 to 185 GPa.

shock temperatures optical pyrometer crystalline c

Morphology of meteoroid and space debris craters on LDEF metal targets

We measured the depths, average diameters, and circularity indices of over 600 micrometeoroid and space debris craters on various metal surfaces exposed to space on the Long Duration Exposure Facility (LDEF) satellite, as a test of some of the formalisms used to convert the diameters of craters on space-exposed surfaces into penetration depths for the purpose of calculating impactor sizes or masses. The topics covered include the following: targe materials orientation; crater measurements and sample populations; effects of oblique impacts; effects of projectile velocity; effects of crater size; effects of target hardness; effects of target density; and effects of projectile properties.

Love, S. G.

Implications of a phase-transition thermostat for chondrule melting

It is widely accepted that chondrules were formed in brief, localized nebular heating episodes. Given the apparent (at least local) high efficiency of chondrule formation, these thermal events seem to have occurred at a large number of different times and/or azimuthal locations in the solar nebula. It is reasonable to expect that the chondrule-forming events, whatever their underlying cause, were not all identical, but instead occurred with some spread of heating intensities. If this was so, it is puzzling that compositional and textural evidence points to peak temperatures certainly within 1400 - 1750 C, and in most cases within 1500 - 1550 C. This problem is addressed in this article and a possible explanation for this restricted range of peak temperatures is discussed.

Love, S. G.

Formation of chondrules by electrical discharge heating

A possible mechanism for making chondrules in the solar nebula is electrical discharge ('lightning') heating, which can create high-temperature (greater than 1600 K), short-duration (approximately 10 s) thermal events as indicated by the chondritic record. Lightning occurs in many diverse terrestrial and planetary settings, and may have occurred in the solar nebula; it is thus worthwhile to investigate its implications for chondrule formation. Nebular discharges do not appear a viable source of heat for melting chondrule precursors, regardless of the uncertainty in the details of the mode. Nonetheless, we believe nebular lightning worthy of further investigation than what is presented here. Experiments analogous to those currently underway to investigate terrestrial thunderstorm lightning could be fruitful in refining nebular lightning models, and would be double interesting in application to nonthunderstorm and planetary lightnings.

Love, S. G.

Variations among chondrite groups: Constraints on nebular processes

Diverse proportions of the four major ingredients are found in the 13 chondrite groups. Ca-Al-rich inclusions (CAI) include amoeboid-olivine aggregates, which contain refractory nodules. Matrix material forms aggregates and rims on other constituents and contains micrometer-sized grains and a small, uniform concentration of presolar grains. Fe, Ni grains are mostly derived from hot chondrules. Although bulk nonvolatile chondritic elemental ratios are typically within 30% of solar values, individual CAI and some chondrules shown large deviations.

Scott, E. R. D.

Identification of cometary and asteroidal particles in stratospheric IDP collections

He release temperature curves were determined for a specially processed set of 5 microns to 15 microns stratospheric IDP's whose masses, densities, and compositions were accurately measured. The He release temperature in combination with atmospheric entry calculations yields a most probable entry velocity for each particle and association with either an asteroidal (low velocity) or cometary (high velocity) origin. It was found that over half of the 5-15 microns IDP's have entry velocities consistent with asteroidal origin and that at least 20 percent have cometary origins. A few of the asteroidal particles are porous aggregates and it appears that there may be close material similarities among some primitive asteroids and comets. In the processing of individual 5 microns IDP's and determination of entry velocities, a few dozen microtome slices that can be used for a variety of detailed TEM, IR, and ion probe studies were preserved. These procedures provide laboratory samples that can be generically associated with asteroids and comets and are in a sense a limited sample return mission from these primitive bodies.

Brownlee, D. E.

Densities of 5-15 micron interplanetary dust particles

We have measured the densities of about 100 5-15 micron stratospheric IDPs. Great care was taken to minimize selection bias in the sample population. Masses were determined using an absolute x-ray analysis technique with a transmission electron microscope, and volumes were found using scanning electron microscope imagery. Unmelted chondritic particles have densities between 0.5 and 6.0 g/cc. Roughly half of the particles have densities below 2 g/cc, indicating appreciable porosity, but porosities greater than about 70 percent are rare. IDPs with densities above 3.5 g/cc usually contain large sulfide grains. We find no evidence of bimodality in the unmelted particle density distribution. Chondritic spherules (melted particles) have densities near 3.5 g/cc, consistent with previous results for deep sea spherules.

Love, S. G.

Heating and thermal transformation of micrometeoroids entering the earth's atmosphere

The present numerical solutions for the atmospheric entry of 10 micron-1 mm diameter micrometeoroids gave attention to ablative mass loss and cooling, together with gravitational and curvature effects, for entry velocities in the 11.2-72 km/sec range. Maximum temperature and mass-loss rates are found to generally occur at altitudes between 85 and 90 km, during about 1 sec of peak heating; the survival of all particles in the 70 micron-1 mm size range is noted to be limited to those with minimal entry velocity. Virtually all of the 'cosmic spherules' of more than 70-mm diameter, as well as giant unmelted micrometeorites, are implied by the present results to be of asteroidal origin.

Love, S. G.