Engineering Papers⌕ Search

Engineering topics

Liu, Ying

Publications and source records attributed to Liu, Ying.

At least 109 records · Page 6

Inhibition of miR-361-5p suppressed pulmonary artery smooth muscle cell survival and migration by targeting ABCA1 and inhibiting the JAK2/STAT3 pathway

Highlights: • MiR-361-5p was significantly increased in hypoxia-induced hPASMCs. • Inhibition of miR-361-5p suppressed hypoxia-induced hPASMCs proliferation and migration. • miR-361-5p targeted ABCA1. • Overexpression of ABCA1 enhanced the effect of anti-miR-361-5p on hPASMCs proliferation and migration. • miR-361-5p inhibited JAK2/STAT3 pathway. MicroRNAs play a crucial role in the progression of pulmonary arterial hypertension (PAH). The aim of this study was to investigate the effect of miR-361-5p on the proliferation, migration and apoptosis of pulmonary artery smooth muscle cells (PASMCs) that under the treatment of hypoxia and explore the underlying mechanisms. The results proved that hypoxia noticeably up-regulated the expression of miR-361-5p in PASMCs in comparison to the normoxia-treated cells, while TNF-α and IL-6 stimulation had no obvious effects on miR-361-5p level. Hypoxia induced miR-361-5p elevation in a HIF-1α-dependent manner. Inhibition of miR-361-5p dramatically inhibited hypoxia-induced cell proliferation and migration. miR-361-5p inhibition also rescued hypoxia exposure caused suppression of PASMCs apoptosis. In addition, the results showed that ABCA1 was a direct target of miR-361-5p and was down-regulated in hypoxia-induced PASMCs. Hypoxia and TNF-α or IL-6 stimulation significantly inhibited ABCA1 expression. In addition, overexpression of ABCA1 enhanced the effect of miR-361-5p on hPASMCs. Furthermore, the inhibition of miR-361-5p significantly down-regulated the expression level of p-JAK2 and p-STAT3. In conclusion, it may suggest that the suppression of miR-361-5p suppressed PASMC survival and migration by targeting ABCA1 and inhibiting the JAK2/STAT3 pathway.

60 APPLIED LIFE SCIENCES↗

Electrospun Conjugated Polymer/Fullerene Hybrid Fibers: Photoactive Blends, Conductivity through Tunneling-AFM, Light Scattering, and Perspective for Their Use in Bulk-Heterojunction Organic Solar Cells

Hybrid conjugated polymer/fullerene filaments based on MEH-PPV/PVP/PCBM were prepared by electrospinning, and their properties were assessed by scanning electron, atomic and lateral-force, tunneling, and confocal microscopies, as well as by attenuated-total-reflection Fourier transform infrared spectroscopy, photoluminescence quantum yield, and spatially resolved fluorescence. Highlighted features include the ribbon shape of the realized fibers and the persistence of a network serving as a template for heterogeneous active layers in solar cell devices. A set of favorable characteristics is evidenced in this way in terms of homogeneous charge-transport behavior and formation of effective interfaces for diffusion and dissociation of photogenerated excitons. The interaction of the organic filaments with light, exhibiting specific light-scattering properties of the nanofibrous mat, might also contribute to spreading incident radiation across the active layers, thus potentially enhancing photovoltaic performance. Finally, this method might be applied to other electron donor–electron acceptor material systems for the fabrication of solar cell devices enhanced by nanofibrillar morphologies embedding conjugated polymers and fullerene compounds.

14 SOLAR ENERGY↗

Existence of electron and hole pockets and partial gap opening in the correlated semimetal Ca 3 Ru 2 O 7

The electronic band structure of correlated Ca 3 Ru 2 O 7 featuring an antiferromagnetic (AFM) as well as a structural transition has been determined theoretically at high temperatures, which has led to the understanding of the remarkable properties of Ca 3 Ru 2 O 7 , such as the bulk spin-valve effects. However, its band structure and Fermi surface (FS) below the structural transition have not been resolved, even though a FS consisting of electron pockets was found experimentally. Here we report magnetoelectrical transport and thermoelectric measurements with the electric current and temperature gradient directed along the a and b axes, respectively, of an untwined single crystal of Ca 3 Ru 2 O 7 . The thermopowers obtained along the two crystal axes were found to show opposite signs at low temperatures, demonstrating the presence of both electron and hole pockets on the FS. In addition, how the FS evolves across T* = 30K at which a distinct transition from coherent to incoherent behavior occurs was also inferred: the Hall and Nernst coefficient results suggest a temperature- and momentum-dependent partial gap opening in Ca 3 Ru 2 O 7 below the structural transition with a possible Lifshitz transition occurring at T*. In conclusion, the experimental demonstration of a correlated semimetal ground state in Ca 3 Ru 2 O 7 calls for further theoretical studies of this remarkable material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Osteopontin promotes collagen I synthesis in hepatic stellate cells by miRNA-129-5p inhibition

Activation of hepatic stellate cells (HSCs) is an essential event in the initiation and progression of liver fibrosis. HSCs are believed to be the major source of collagen-producing myofibroblasts in fibrotic livers. A key feature in the pathogenesis of liver fibrosis is fibrillar Collagen I (Col 1) deposition. Osteopontin (OPN), an extracellular matrix (ECM) cytokine expressed in HSCs, could drive fibrogenesis by modulating the HSC pro-fibrogenic phenotype and Col 1 expression. Here, we aimed to investigate the molecular mechanism of OPN regulating the activation of HSCs. Our results showed that hepatic expression of OPN was increased in patients with liver fibrosis. In addition, hepatic OPN was positively correlated with Col 1 and α-SMA. Recombinant OPN (rOPN) upregulated Col 1 and α-SMA expression in LX-2 cells. However, OPN knockdown downregulated Col 1 expression. The 3′-UTR of the collagen 1 (Col 1) was identified to bind miR-129-5p. Transfection of miR-129-5p mimic in HSC resulted in a marked reduction of Col 1 expression. Conversely, a decrease in miR-129-5p in HSCs transfected by anti-sense miR-129-5p (AS-miR-129-5p) caused Col 1 upregulation. Furthermore, luciferase reporter assay showed that miR-129-5p directly target the 3′-UTR of Col1α1 mRNA via repressing its post-transcriptional activities. Finally, miR-129-5p level was decreased in fibrotic liver of human, and reduced by rOPN treatment. In contrast, miR-129-5p was induced in HSCs transfected by OPN siRNA. These data suggested that OPN induces Col 1 expression via suppression of miR-129-5p in HSCs.

60 APPLIED LIFE SCIENCES↗

Lithium ion intercalation in thin crystals of hexagonal TaSe 2 gated by a polymer electrolyte

Ionic liquid gating has been used to modify the properties of layered transition metal dichalcogenides (TMDCs), including two-dimensional (2D) crystals of TMDCs used extensively recently in the device work, which has led to observations of properties not seen in the bulk. The main effect comes from the electrostatic gating due to the strong electric field at the interface. In addition, ionic liquid gating also leads to ion intercalation when the ion size of the gate electrolyte is small compared to the interlayer spacing of TMDCs. However, the microscopic processes of ion intercalation have rarely been explored in layered TMDCs. Here, we employed a technique combining photolithography device fabrication and electrical transport measurements on the thin crystals of hexagonal TaSe2 using multiple channel devices gated by a polymer electrolyte LiClO 4 /Polyethylene oxide (PEO). The gate voltage and time dependent source-drain resistances of these thin crystals were used to obtain information on the intercalation process, the effect of ion intercalation, and the correlation between the ion occupation of allowed interstitial sites and the device characteristics. We found a gate voltage controlled modulation of the charge density waves and a scattering rate of charge carriers. Furthermore our work suggests that ion intercalation can be a useful tool for layered materials engineering and 2D crystal device design.

36 MATERIALS SCIENCE↗

Fabrication, microstructure, and wear performance of WC-Fe composite/metal coating fabricated by resistance seam welding

Highlights: • WC-Fe/metal coating consisted of WC-Fe layer and metal interlayer was fabricated by resistance seam welding. • The microstructure, hardness and wear performance of coatings with different WC particles size were analyzed. • The wear mechanism of coatings showed huge difference following various sliding distance. - Abstract: WC-Fe composite/metal coatings consisting of a WC-Fe composite layer and a metal interlayer were successfully fabricated on an Al 6061 substrate by resistance seam welding. The microstructures and phase compositions of the WC-Fe composite/metal coatings with different WC particle sizes (nano, fine, and coarse) were investigated. The WC-Fe composite layer consisted of WC particles and a Fe-C-Si super hard alloy (SHA) component, whereas the metal interlayer was composed of SHA, FeAl{sub 3}, Fe{sub 2}Al{sub 5}, and Al 6061. The surface microhardness of the WC-Fe composite/metal coating increased with increasing WC particle size. The wear performance of the coatings tested with different sliding distances is discussed in detail. Coating-C (coarse) showed the best wear resistance. The wear rates of both coating-N (nano) and coating-C decreased as the sliding distance increased, while coating-F (fine) demonstrated the opposite behavior. The wear mechanisms of the coatings were drastically different owing to the significantly different WC particle behavior at various sliding distances.

36 MATERIALS SCIENCE↗

Up-regulation of caveolin-1 by DJ-1 attenuates rat pulmonary arterial hypertension by inhibiting TGFβ/Smad signaling pathway

Highlights: • Knockout of DJ-1-aggravated hypoxic pulmonary arterial hypertension of rats. • Overexpression of DJ-1 alleviated PASMs injury induced by hypoxia. • DJ-1 alleviated hypoxia-induced PASMCs injury via Cav-1 by inhibiting TGFβ/Smad. Pulmonary arterial hypertension (PAH), characterized by excessive proliferation and apoptosis resistance of pulmonary artery smooth muscle cells (PASMCs), is closely associated with the imbalance in vasoactive mediators and massive remodeling of pulmonary vasculature. DJ-1/park7, a multifunctional protein, plays a critical defense role in several cytobiological activity, such as transcriptional regulation, anti-oxidative stress and tumor formation. In this study, we investigated the effects of DJ-1 on hypoxia-induced PAH model rats and PASMCs, as well as its possible molecular mechanism. First, the low expressions of DJ-1 and caveolin-1 (Cav-1) were synchronously detected in lung tissue of PAH model rats and hypoxia-induced PASMCs by Western blot. Then, the DJ-1 wild type (WT) or Knock out (KO) rats were exposed to chronic hypoxia to mimic a hypoxic PAH condition. The protein level of Cav-1 was markedly decreased in the tissue of DJ-1 KO rats, and additionally lower in tissue of the hypoxia group than that in the normoxia group for DJ-1 WT and KO rats. In vivo, hemodynamic data showed that the pulmonary arterial pressure (mPAP), right ventricle systolic pressure (RVSP) and pulmonary arterial systolic pressure (PASP), as well as the weight of the right ventricle/left ventricle plus septum (RV/LV+S) ratio of PAH model rats were higher in the DJ-1 KO group than those in the DJ-1 WT group. Moreover, knockout of DJ-1 also results in the phenotype switch from contractile to synthetic PASMC, which is reflected by reduced calponin and SM22α expressions. In vitro, DJ-1 overexpression reversed hypoxia-induced elevation of PASMC cell proliferation, migration and Ca{sup 2+} concentration, which were not obviously observed in Cav-1 shRNA (sh-Cav-1) and DJ-1 co-transfected cells. Then the increased levels of calponin and SM22α were detected in the DJ-1 group; similarly those levels were not changed in the DJ-1+sh-Cav-1 group. Finally, the expression of TGFβ1, p-Smad2 and p-Smad3 were obviously decreased in the ad-DJ-1 group, however those were all elevated in the DJ-1 and sh-Cav-1 co-transfected groups. In conclusion, these results indicate that DJ-1 may alleviate hypoxia-induced PASMCs injury by Cav-1 through inhibiting the TGFβ/Smad signaling pathway.

60 APPLIED LIFE SCIENCES↗

Coupling a three-dimensional subsurface flow and transport model with a land surface model to simulate stream–aquifer–land interactions (CP v1.0)

Abstract. A fully coupled three-dimensional surface and subsurface land model is developed and applied to a site along the Columbia River to simulate three-way interactions among river water, groundwater, and land surface processes. The model features the coupling of the Community Land Model version 4.5 (CLM4.5) and a massively parallel multiphysics reactive transport model (PFLOTRAN). The coupled model, named CP v1.0, is applied to a 400 m × 400 m study domain instrumented with groundwater monitoring wells along the Columbia River shoreline. CP v1.0 simulations are performed at three spatial resolutions (i.e., 2, 10, and 20 m) over a 5-year period to evaluate the impact of hydroclimatic conditions and spatial resolution on simulated variables. Results show that the coupled model is capable of simulating groundwater–river-water interactions driven by river stage variability along managed river reaches, which are of global significance as a result of over 30 000 dams constructed worldwide during the past half-century. Our numerical experiments suggest that the land-surface energy partitioning is strongly modulated by groundwater–river-water interactions through expanding the periodically inundated fraction of the riparian zone, and enhancing moisture availability in the vadose zone via capillary rise in response to the river stage change. Meanwhile, CLM4.5 fails to capture the key hydrologic process (i.e., groundwater–river-water exchange) at the site, and consequently simulates drastically different water and energy budgets. Furthermore, spatial resolution is found to significantly impact the accuracy of estimated the mass exchange rates at the boundaries of the aquifer, and it becomes critical when surface and subsurface become more tightly coupled with groundwater table within 6 to 7 meters below the surface. Inclusion of lateral subsurface flow influenced both the surface energy budget and subsurface transport processes as a result of river-water intrusion into the subsurface in response to an elevated river stage that increased soil moisture for evapotranspiration and suppressed available energy for sensible heat in the warm season. The coupled model developed in this study can be used for improving mechanistic understanding of ecosystem functioning and biogeochemical cycling along river corridors under historical and future hydroclimatic changes. The dataset presented in this study can also serve as a good benchmarking case for testing other integrated models.

58 GEOSCIENCES↗

Coupling a three-dimensional subsurface flow and transport model with a land surface model to simulate stream–aquifer–land interactions (CP v1.0)

A fully coupled three-dimensional surface and subsurface land model is developed and applied to a site along the Columbia River to simulate three-way interactions among river water, groundwater, and land surface processes. The model features the coupling of the Community Land Model version 4.5 (CLM4.5) and a massively parallel multiphysics reactive transport model (PFLOTRAN). The coupled model, named CP v1.0, is applied to a 400 m × 400 m study domain instrumented with groundwater monitoring wells along the Columbia River shoreline. CP v1.0 simulations are performed at three spatial resolutions (i.e., 2, 10, and 20 m) over a 5-year period to evaluate the impact of hydroclimatic conditions and spatial resolution on simulated variables. Results show that the coupled model is capable of simulating groundwater–river-water interactions driven by river stage variability along managed river reaches, which are of global significance as a result of over 30 000 dams constructed worldwide during the past half-century. Our numerical experiments suggest that the land-surface energy partitioning is strongly modulated by groundwater–river-water interactions through expanding the periodically inundated fraction of the riparian zone, and enhancing moisture availability in the vadose zone via capillary rise in response to the river stage change. Meanwhile, CLM4.5 fails to capture the key hydrologic process (i.e., groundwater–river-water exchange) at the site, and consequently simulates drastically different water and energy budgets. Furthermore, spatial resolution is found to significantly impact the accuracy of estimated the mass exchange rates at the boundaries of the aquifer, and it becomes critical when surface and subsurface become more tightly coupled with groundwater table within 6 to 7 meters below the surface. Inclusion of lateral subsurface flow influenced both the surface energy budget and subsurface transport processes as a result of river-water intrusion into the subsurface in response to an elevated river stage that increased soil moisture for evapotranspiration and suppressed available energy for sensible heat in the warm season. The coupled model developed in this study can be used for improving mechanistic understanding of ecosystem functioning and biogeochemical cycling along river corridors under historical and future hydroclimatic changes. The dataset presented in this study can also serve as a good benchmarking case for testing other integrated models.

58 GEOSCIENCES↗

Core–Shell Structure and Aggregation Number of Micelles Composed of Amphiphilic Block Copolymers and Amphiphilic Heterografted Polymer Brushes Determined by Small-Angle X-ray Scattering

A large group of functional nanomaterials employed in biomedical applications, including targeted drug delivery, relies on amphiphilic polymers to encapsulate therapeutic payloads via self-assembly processes. Knowledge of the micelle structures will provide critical insights into design of polymeric drug delivery systems. Core–shell micelles composed of linear diblock copolymers poly(ethylene glycol)-b-poly(caprolactone) (PEG-b-PCL), poly(ethylene oxide)-b-poly(lactic acid) (PEG-b-PLA), as well as a heterografted brush consisting of a poly(glycidyl methacrylate) backbone with PEG and PLA branches (PGMA-g-PEG/PLA) were characterized by dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) measurements to gain structural information regarding the particle morphology, core–shell size, and aggregation number. The structural information at this quasi-equilibrium state can also be used as a reference when studying the kinetics of polymer micellization.

36 MATERIALS SCIENCE↗

Impacts of interactive dust and its direct radiative forcing on interannual variations of temperature and precipitation in winter over East Asia

In this work, we used 150-year pre-industrial simulations of the Community Earth System Model (CESM) to quantify the impacts of interactively-modeled dust emissions on the interannual variations of temperature and precipitation over East Asia during the East Asian Winter Monsoon (EAWM) season. The simulated December-January-February dust column burden and dust optical depth are lower over northern China in the strongest EAWM years than those of the weakest years, with regional mean values lower by 38.3% and 37.2%, respectively. The decrease in dust over the dust source regions (the Taklamakan and Gobi Deserts) and the downwind region (such as the North China Plain) leads to an increase in direct radiative forcing (RF) both at the surface and top of atmosphere by up to 1.5 and 0.75 W m-2, respectively. The effects of EAWM-related variations in surface winds, precipitation and their effects on dust emissions and wet removal contribute about 67% to the total dust-induced variations of direct RF at the surface and partly offset the cooling that occurs with the EAWM strengthening by heating the surface. The variations of surface air temperature induced by the changes in wind and dust emissions increase by 0.4-0.6 K over eastern coastal China, northeastern China, and Japan, which weakens the impact of EAWM on surface air temperature by 3–18% in these regions. The warming results from the combined effects of changes in direct RF and easterly wind anomalies that bring warm air from the ocean to these regions. Moreover, the feedback of the changes in wind on dust emissions weakens the variations of the sea level pressure gradient on the Siberian High while enhancing the Maritime Continent Low. Therefore, cold air is prevented from being transported from Siberia, Kazakhstan, western and central China to the western Pacific Ocean and decreases surface air temperature by 0.6 K and 2 K over central China and the Tibetan Plateau, respectively. Over eastern coastal China, the variations of large-scale precipitation induced by the feedback of EAWM-related changes in wind on dust emissions increase by 10-30% in winter because of the increase in surface air temperature and the anomalous circulation.

54 ENVIRONMENTAL SCIENCES↗

Band dependence of charge density wave in quasi-one-dimensional Ta 2 NiSe 7 probed by orbital magnetoresistance

Ta 2 NiSe 7 is a quasi-one-dimensional (quasi-1D) transition-metal chalcogenide with Ta and Ni chain structures. An incommensurate charge-density wave (CDW) in this quasi-1D structure was well studied previously using tunnelling spectrum, X-ray, and electron diffraction, whereas its transport property and the relation to the underlying electronic states remain to be explored. Here, we report our results of the magnetoresistance (MR) on Ta 2 NiSe 7 . A breakdown of Kohler's rule is found upon entering the CDW state. Concomitantly, a clear change in curvature in the field dependence of MR is observed. We show that the curvature change is well described by the two-band orbital MR, with the hole density being strongly suppressed in the CDW state, indicating that the p orbitals from Se atoms dominate the change in transport through CDW transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of naturally occurring charged mutations on the structure, stability, and binding of the Pin1 WW domain

Pin1 is a peptidyl-prolyl cis-trans isomerase, whose WW domain specifically recognizes the pSer/Thr-Pro motif. Pin1 is involved in multiple phosphorylation events that regulate the activities of various substrates, and Pin1 deregulation has been reported in various diseases, including cancer and Alzheimer's disease. The WW domain of Pin1 has been used as a small model protein to investigate the folding mechanisms of the β-sheet structure by studying the effect of mutations or its naturally occurring variants. However, only a few studies have investigated the structure and binding of Pin1 WW mutants. In the present work, two naturally occurring Pin1 WW variants, namely, G20D and S16R, derived from the cynomolgus monkey and African green monkey, respectively, were selected to investigate the influence of charge mutation on the structure, stability, and binding properties of the Pin1 WW domain. Analysis using a combination of nuclear magnetic resonance (NMR) and chemical shift-based calculations revealed that the G20D and S16R mutants had high structural similarity to the wild-type Pin1 WW domain. However, the presence of a charge mutation significantly decreased the stability of the Pin1 WW domain. Both the wild-type and G20D forms of the Pin1 WW domain utilized a three-site mode to bind to a phosphorylated Tau peptide, pT231, whereas the S16R mutant binds to the pT231 peptide either in a non-specific manner or through a totally different binding mechanism. Correspondingly, the wild-type and two mutant Pin1 WW domains showed different binding affinities to the Tau phosphopeptide. Considering that the WW domain participates in the catalytic activity of the Pin1 isomerase, our study represents a novel approach for studying Pin1 function through the analysis of its naturally occurring mutants. - Highlights: • G20D and S16R Pin1 WW had high structure similarity to wild-type. • Stabilities of G20D and S16R mutant Pin1 WW significantly decreased. • wild-type and G20D Pin1 WW utilized three-site mode for phosphorylated Tau binding. • wild-type and mutant Pin1 WW showed differential binding affinities to substrate.

60 APPLIED LIFE SCIENCES↗

Airborne observations reveal elevational gradient in tropical forest isoprene emissions

Terrestrial vegetation emits vast quantities of volatile organic compounds (VOCs) to he atmosphere1-3, which influence oxidants and aerosols leading to complex feedbacks on air quality and climate4-6. Isoprene dominates global non-methane VOC emissions with tropical regions contributing ~80% of global isoprene emissions2. Isoprene emission rates vary over several orders of magnitude for different plant species, and characterizing this immense biological chemodiversity is a challenge for estimating isoprene emission from tropical forests. Here we present the isoprene emission estimates from aircraft direct eddy covariance measurements over the pristine Amazon forest. We report isoprene emission rates that are 3 times higher than satellite top-down estimates and 35% higher than model predictions based on satellite land cover and vegetation specific emission factors (EFs). The results reveal strong correlations between observed isoprene emission rates and terrain elevations which are confirmed by similar correlations between satellite-derived isoprene emissions and terrain elevations. We propose that the elevational gradient in the Amazonian forest isoprene emission capacity is determined by plant species distributions and can explain a substantial degree of isoprene emission variability in tropical forests. Finally, we apply this approach over the central Amazon and use a model to demonstrate the impacts on regional air quality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dust-wind interactions can intensify aerosol pollution over eastern China

Eastern China has experienced severe and persistent winter haze episodes in recent years due to intensification of aerosol pollution, which has adverse impacts on hundreds of millions of people across China1–4. In addition to anthropogenic emissions, the winter aerosol pollution over eastern China is associated with abnormal meteorological conditions, including weaker wind speeds5–9. Using a global climate model and a chemical transport model, we show that variations in dust emissions decrease the wintertime land-sea surface air temperature difference between eastern China and the South China Sea and weaken winds below the lowest 10th percentile of wind speed by 0.06 m s-1. Here, the weakened winds enhance stagnation and account for 13% of the increases in PM2.5 aerosol concentrations over eastern China. Although recent increases in anthropogenic emissions are the main factor causing haze over eastern China, we conclude that natural emissions also exert a significant influence on the increases in wintertime PM2.5 concentrations, with important implications that should be considered in air quality studies.

54 ENVIRONMENTAL SCIENCES↗

Pressure-Induced Polymorphic, Optical, and Electronic Transitions of Formamidinium Lead Iodide Perovskite

Formamidinium lead iodide (FAPbI 3 ) perovskite as a superior solar cell material was investigated in two polymorphs at high pressures using in situ synchrotron X-ray diffraction, FTIR spectroscopy, photoluminescence (PL) spectroscopy, electrical conductivity (EC) measurements, and ab initio calculations. We identified two new structures (i.e., Imm2 and Immm) for α-FAPbI 3 but only a structural distortion (in C2/c) for δ-FAPbI 3 upon compression. A pressure-enhanced hydrogen bond plays a prominent role in structural modifications, as corroborated by FTIR spectroscopy. PL measurements and calculations consistently show the structure and pressure dependences of the band gap energies. Lastly, EC measurements reveal drastically different transport properties of α- and δ-FAPbI 3 at low pressures but a common trend to metallic states at high pressures. All of these observations suggest strongly contrasting structural stabilities and pressure-tuned optoelectric properties of the two FAPbI 3 polymorphs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequential self-folding of polymer sheets

Shape plays an important role in defining the function of materials, particularly those found in nature. Several strategies exist to program materials to change from one shape to another; however, few can temporally and spatially control the shape. Programming the sequence of shape transformation with temporal control has been driven by the desire to generate complex shapes with high yield and to create multiple shapes from the same starting material. This paper demonstrates a markedly simple strategy for programmed self-folding of two-dimensional (2D) polymer sheets into 3D objects in a sequential manner using external light. Printed ink on the surface of the polymer sheets discriminately absorbs light on the basis of the wavelength of the light and the color of the ink that defines the hinge about which the sheet folds. The absorbed light gradually heats the underlying polymer across the thickness of the sheet, which causes relief of strain to induce folding. These color patterns can be designed to absorb only specific wavelengths of light (or to absorb differently at the same wavelength using color hues), thereby providing control of sheet folding with respect to time and space. This type of shape programming may have numerous applications, including reconfigurable electronics, actuators, sensors, implantable devices, smart packaging, and deployable structures.

42 ENGINEERING↗

ALMA Observations of Vibrationally Excited HC{sub 3}N Lines Toward Orion KL

We present high spatial resolution ALMA observations of vibrational transitions of HC{sub 3}N toward Orion KL in the 214–247 GHz frequency band. 41 transitions of HC{sub 3}N in 7 vibrationally excited states, and 23 transitions of {sup 13}C isotopologues of HC{sub 3}N in 2 vibrational states are detected. The line images show that vibrationally excited HC{sub 3}N lines originate mainly from the hot core of Orion and IRc7. The images of HC{sub 3}N vibrationally excited lines show that the line emission peaks associated with the hot core move from south to northeast as E{sub u} increases. Based on multiple transitions of each vibrationally excited state, we performed local thermodynamic equilibrium calculations in the XCLASS suite toward the hot core and IRc7 positions. Generally, transitions in highly excited states have higher rotational temperatures and lower column densities. The rotational temperatures and column densities of the hot core range from 93 to 321 K, and from 1.0×10{sup 14} to 4.9×10{sup 16} cm{sup −2}, respectively. Lower rotational temperatures ranging from 88 to 186 K and column densities from 1.0×10{sup 14} to 3.2×10{sup 16} cm{sup −2} are obtained toward IRc7. The facts that the hot core emission peaks of vibrationally excited HC{sub 3}N lines move from south to northeast with increasing E{sub u}, and that higher-energy HC{sub 3}N lines have higher rotational temperatures and lower column densities, appear to support that the hot core is externally heated. The emission peaks are moving along the major axis of the SiO outflow, which may indicate that higher-energy HC{sub 3}N transitions are excited by interaction between pre-existing dense medium and shocks generated by SiO outflows.

79 ASTRONOMY AND ASTROPHYSICS↗