Engineering Papers⌕ Search

Engineering topics

Liu, Yang

Publications and source records attributed to Liu, Yang.

At least 451 records · Page 25

A facile route to synthesis of CoPt magnetic nanoparticles

Graphical abstract: CoPt NPs are successfully synthesized by sol–gel method. Different distinct particle sizes with narrow particle size distribution of CoPt nanoparticles are obtained. The maximum coercivity of 254,720.3 A/m is obtained for 800 °C heat-treated sample. Display Omitted Highlights: ► L1{sub 0}-CoPt NPs with FCT structure are successfully synthesized by sol–gel method. ► The maximum value of 254,720.3 A/m is obtained for the samples heated at 800 °C. ► The synthetic route proposed in this study is less toxic and easy-to-handle. -- Abstract: The face-centered tetragonal (FCT) ordered L1{sub 0} CoPt nanoparticles (NPs) are prepared by the sol–gel method. Their structure and magnetic properties are characterized by the X-ray diffraction (XRD), the transmission electron microscope (TEM) and the vibrating sample magnetometer (VSM). The results indicate that the CoPt NPs heated at 400 °C are the disordered face-centered cubic (FCC) structure, whereas the samples annealed at the temperature above 600 °C exhibit an ordered FCT structure. TEM images show the increase of the particle size as the annealing temperature increases. SAED images show the appearance of the L1{sub 0} phase at 800 °C, and the maximum coercivity is 254,720.3 A/m.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly sensitive humidity sensing properties of carbon quantum dots films

Graphical abstract: Display Omitted Highlights: ► A humidity sensing device was fabricated based on carbon quantum dots (CQDs) films. ► The conductivity of the CQDs films shows a linear and rapid response to atmosphere humidity. ► The humidity sensing property was due to the hydrogen bonds between the functional groups on CQDs. -- Abstract: We reported the fabrication of a humidity sensing device based on carbon quantum dots (CQDs) film. The conductivity of the CQDs film has a linear and rapid response to relative humidity, providing the opportunity for the fabrication of humidity sensing devices. The mechanism of our humidity sensor was proposed to be the formation of hydrogen bonds between carbon quantum dots and water molecules in the humidity environment, which significantly promote the electrons migration. In a control experiment, this hypothesis was confirmed by comparing the humidity sensitivity of candle soot (i.e. carbon nanoparticles) with and without oxygen containing groups on the surfaces.

36 MATERIALS SCIENCE↗

Carbon microspheres from ethanol at low temperature: Fabrication, characterization and their use as an electrocatalyst support for methanol oxidation

Highlights: ► Carbon microbeads were prepared by the carbonization of ethanol at low temperature. ► The low temperature carbonization of ethanol was catalyzed by iodine. ► Carbon microbeads can serve as ideal candidate for catalyst supports. -- Abstract: Carbon microspheres (CMSs) with a diameter range of 2–3 μm were prepared by the iodine-catalyzed carbonization of ethanol at low temperatures by solvothermal synthesis. The reaction time, concentrations of reactants, temperatures, different alcohols as carbon precursors and reaction environments were systematically altered to determine the optimal synthesis conditions. The size and shape were characterized by scanning and transmission electron microscopy and their structure was characterized by X-ray powder diffraction and Raman spectroscopy. Energy dispersive X-ray spectroscopy, Fourier transform infrared and X-ray photoelectron spectroscopy showed that abundant oxygen-containing functional groups remain on the surface of the carbon spheres. The formation mechanism involves iodine promotion of the oxidation of ethanol, which results in formation of the CMSs. The specific activity of the CMS-supported Pt catalyst is higher than that of a commercial Pt catalyst from E-TEK or the unsupported Pt catalyst.

36 MATERIALS SCIENCE↗

Horizontal Flows in the Photosphere and Subphotosphere of Two Active Regions

We compare horizontal flow fields in the photosphere and in the subphotosphere (a layer 0.5 megameters below the photosphere) in two solar active regions: AR11084 and AR11158. AR11084 is a mature, simple active region without significant flaring activity, and AR11158 is a multipolar, complex active region with magnetic flux emerging during the period studied. Flows in the photosphere are derived by applying the Differential Affine Velocity Estimator for Vector Magnetograms (DAVE4VM) on HMI-observed vector magnetic fields, and the subphotospheric flows are inferred by time-distance helioseismology using HMI-observed Dopplergrams. Similar flow patterns are found for both layers for AR11084: inward flows in the sunspot umbra and outward flows surrounding the sunspot. The boundary between the inward and outward flows, which is slightly different in the photosphere and the subphotosphere, is within the sunspot penumbra. The area having inward flows in the subphotosphere is larger than that in the photosphere. For AR11158, flows in these two layers show great similarities in some areas and significant differences in other areas. Both layers exhibit consistent outward flows in the areas surrounding sunspots. On the other hand, most well-documented flux-emergence-related flow features seen in the photosphere do not have counterparts in the subphotosphere. This implies that the horizontal flows caused by flux emergence do not extend deeply into the subsurface.

SOLAR↗

Beam-assisted large elongation of in situ formed Li2O nanowires

As an important component of the solid electrolyte interface in lithium ion batteries and an effective blanket breeding material in fusion reactor, the mechanical property of Li2O is of great interest but is not well understood. Here we show that the polycrystalline Li2O nanowires were formed in situ by touching and pulling lithium hydroxide under electron beam (e-beam) illumination. The Li2O nanowires sustained an enhanced elongation (from 80% to 176%) under low dose e-beam irradiation near room temperature as compared with that (from 51% to 57%) without e-beam irradiation. The extremely high deformability could be understood by the fast Li2O diffusion under e-beam irradiation and tensile stress condition. The large elongation without e-beam irradiation implies that nano-structured Li2O is ductile near room temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SELF-CANCELLATION OF EPHEMERAL REGIONS IN THE QUIET SUN

With the observations from the Helioseismic and Magnetic Imager aboard the Solar Dynamics Observatory, we statistically investigate the ephemeral regions (ERs) in the quiet Sun. We find that there are two types of ERs: normal ERs (NERs) and self-canceled ERs (SERs). Each NER emerges and grows with separation of its opposite polarity patches which will cancel or coalesce with other surrounding magnetic flux. Each SER also emerges and grows and its dipolar patches separate at first, but a part of the magnetic flux of the SER will move together and cancel gradually, which is described with the term 'self-cancellation' by us. We identify 2988 ERs, among which there are 190 SERs, about 6.4% of the ERs. The mean value of self-cancellation fraction of SERs is 62.5%, and the total self-canceled flux of SERs is 9.8% of the total ER flux. Our results also reveal that the higher the ER magnetic flux is, (1) the easier the performance of ER self-cancellation is, (2) the smaller the self-cancellation fraction is, and (3) the more the self-canceled flux is. We think that the self-cancellation of SERs is caused by the submergence of magnetic loops connecting the dipolar patches, without magnetic energy release.

79 ASTRONOMY AND ASTROPHYSICS↗