Engineering Papers⌕ Search

Engineering topics

Liu, Y.

Publications and source records attributed to Liu, Y..

At least 235 records · Page 13

β phase instability in poly(vinylidene fluoride/trifluoroethylene) thin films near β relaxation temperature

The β phase stability in poly(vinylidene fluoride/trifluoroethylene) [P(VDF-TrFE)] thin films was studied below 300 K using X-ray diffraction and polarization-electric-field (P-E) hysteresis loops measurements. On as-grown samples, an irreversible partial order-disorder transformation at T{sub β} ∼ 250 K, namely, the β relaxation temperature, was evidenced by the appearance of an additional X-Ray diffraction peak above T{sub β} as well as changes on the P-E loops on heating after the first cooling. This order-disorder-like transformation which is attributed to an all-trans order to helical disorder transition is suggested to take place in defect-rich regions like crystal-amorphous interphases and/or crystalline areas with randomly distributed TrFE defect-like units.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new WRF-Chem treatment for studying regional-scale impacts of cloud processes on aerosol and trace gases in parameterized cumuli

A new treatment of cloud effects on aerosol and trace gases within parameterized shallow and deep convection, and aerosol effects on cloud droplet number, has been implemented in the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) version 3.2.1 that can be used to better understand the aerosol life cycle over regional to synoptic scales. The modifications to the model include treatment of the cloud droplet number mixing ratio; key cloud microphysical and macrophysical parameters (including the updraft fractional area, updraft and downdraft mass fluxes, and entrainment) averaged over the population of shallow clouds, or a single deep convective cloud; and vertical transport, activation/resuspension, aqueous chemistry, and wet removal of aerosol and trace gases in warm clouds. These changes have been implemented in both the WRF-Chem chemistry packages as well as the Kain–Fritsch (KF) cumulus parameterization that has been modified to better represent shallow convective clouds. Testing of the modified WRF-Chem has been completed using observations from the Cumulus Humilis Aerosol Processing Study (CHAPS). The simulation results are used to investigate the impact of cloud–aerosol interactions on regional-scale transport of black carbon (BC), organic aerosol (OA), and sulfate aerosol. Based on the simulations presented here, changes in the column-integrated BC can be as large as –50% when cloud–aerosol interactions are considered (due largely to wet removal), or as large as +40% for sulfate under non-precipitating conditions due to sulfate production in the parameterized clouds. The modifications to WRF-Chem are found to account for changes in the cloud droplet number concentration (CDNC) and changes in the chemical composition of cloud droplet residuals in a way that is consistent with observations collected during CHAPS. Efforts are currently underway to port the changes described here to the latest version of WRF-Chem, and it is anticipated that they will be included in a future public release of WRF-Chem.

54 ENVIRONMENTAL SCIENCES↗

Density modulation experiment to determine transport coefficients on Joint-TEXT Tokamak

Density modulation experiments have been conducted on Joint-TEXT (J-TEXT) Tokamak Ohmic discharge to investigate particle transport based on a model with constant diffusion plus inward convection. Like the HCN interferometer, the newly developed three-wave polarimeter-interferometer system (POLARIS) is used to measure the perturbed density. The comparison of results between the HCN interferometer and POLARIS is given. The consistent results indicate the validity of the analysis scheme. At lower densities, the typical particle confinement time τ{sub p} is found to increase with electron density, while it saturates at higher densities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mapping the Ultrafast Changes of Continuous Shape Measures in Photoexcited Spin Crossover Complexes without Long-Range Order

Establishing a tractable yet complete reaction coordinate for the spin-state interconversion in d(4)-d(7) transition metal complexes is an integral aspect of controlling the dynamics that govern their functionality. For spin crossover phenomena, the limitations of a single-mode approximation that solely accounts for an isotropic increase in the metal-ligand bond length have long been recognized for all but the simple octahedral monodentate FeII compounds. However, identifying the coupled deformations that also impact on the unimolecular rate constants remains experimentally and theoretically challenging, especially for samples that do not display long-range order or when crystallization profoundly alters the dynamics. Owing to the rapid progress in ultrafast X-ray absorption spectroscopy (XAS), it is now possible to obtain transient structural information in any physical phase with unprecedented details. Using picosecond XAS and DFT modeling, the structure adopted by the photoinduced high-spin state of solvated [Fe(terpy)(2)](2+) (terpy: 2,2':6',2 ''-terpyridine) has been recently established. Based on these results, the methodology of the continuous shape measure is applied to classify and quantify the short-lived distortion of the first coordination shell. The reaction coordinate of the spin-state interconversion is clearly identified as a double axial bending. This finding sets a benchmark for gauging the influence of first-sphere and second-sphere interactions in the family of FeII complexes that incorporate terpy derivatives. Some implications for the optimization of related photoactive FeII complexes are also outlined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and properties of layered iron-oxychalcogenides Nd{sub 2}Fe{sub 2}Se{sub 2−x}S{sub x}O{sub 3}

A new series of sulfur-substituted iron-oxychalcogenides Nd{sub 2}Fe{sub 2}Se{sub 2−x}S{sub x}O{sub 3} (0≤x≤0.4) was synthesized by solid state reaction method, and investigated by structure, transport, magnetic and specific heat measurements. The compounds crystallize in the layered tetragonal structure with I4/mmm space group, and show semiconducting behavior. The large discrepancy between the activation energies for conductivity, E{sub ρ} (152–202 meV), and thermopower, E{sub S} (15.6–39.8 meV), indicates the polaronic transport mechanism of the carrier. The parent compound Nd{sub 2}Fe{sub 2}Se{sub 2}O{sub 3} exhibits a frustrated antiferromagnetic (AFM) ground state, and the S-substitution induces an enhanced ferromagnetic (FM) component and possible increased degree of frustration. - Graphical abstract: The crystal structure of Nd{sub 2}Nd{sub 2}Fe{sub 2}Se{sub 2−x}S{sub x}O{sub 3} is built up by stacking fluorite-like Nd{sub 2}O{sub 2} layers and anti-CuO{sub 2}-type Fe{sub 2}O(Se/S){sub 2} layers with Fe{sup 2+} cations coordinated by two in-plane O{sup 2-} and four Se{sup 2-} above and below the square Fe{sub 2}O plane. - Highlights: • We have synthesized a new series of layered iron-oxychalcogenides Nd{sub 2}Fe{sub 2}Se{sub 2−x}S{sub x}O{sub 3}. • They crystallize in layered tetragonal structure and show semiconducting behavior. • The transport analysis indicates the polaronic transport mechanism of the carrier. • The parent compound shows a frustrated antiferromagnetic (AFM) ground state. • The S-substitution induces an enhanced ferromagnetic (FM) component.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Note: A pulsed laser ion source for linear induction accelerators

We have developed a high-current laser ion source for induction accelerators. A copper target was irradiated by a frequency-quadrupled Nd:YAG laser (266 nm) with relatively low intensities of 10{sup 8} W/cm{sup 2}. The laser-produced plasma supplied a large number of Cu{sup +} ions (∼10{sup 12} ions/pulse) during several microseconds. Emission spectra of the plasma were observed and the calculated electron temperature was about 1 eV. An induction voltage adder extracted high-current ion beams over 0.5 A/cm{sup 2} from a plasma-prefilled gap. The normalized beam emittance measured by a pepper-pot method was smaller than 1 π mm mrad.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Coherent phonon modes of crystalline and amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films: A fingerprint of structure and bonding

Femtosecond optical pump-probe measurements have been made upon epitaxial, polycrystalline, and amorphous thin films of Ge{sub 2}Sb{sub 2}Te{sub 5} (GST). A dominant coherent optical phonon mode of 3.4 THz frequency is observed in time-resolved anisotropic reflectance (AR) measurements of epitaxial films, and is inferred to have 3-dimensional T{sub 2}-like character based upon the dependence of its amplitude and phase on pump and probe polarization. In contrast, the polycrystalline and amorphous phases exhibit a comparatively weak mode of about 4.5 THz frequency in both reflectivity (R) and AR measurements. Raman microscope measurements confirm the presence of the modes observed in pump-probe measurements, and reveal additional modes. While the Raman spectra are qualitatively similar for all three phases of GST, the mode frequencies are found to be different within experimental error, ranging from 3.2 to 3.6 THz and 4.3 to 4.7 THz, indicating that the detailed crystallographic structure has a significant effect upon the phonon frequency. While the lower frequency (3.6 THz) mode of amorphous GST is most likely associated with GeTe{sub 4} tetrahedra, modes in epitaxial (3.4 THz) and polycrystalline (3.2 THz) GST could be associated with either GeTe{sub 6} octahedra or Sb-Te bonds within defective octahedra. The more polarizable Sb-Te bonds are the most likely origin of the higher frequency (4.3–4.7 THz) mode, although the influence of Te-Te bonds cannot be excluded. The effect of high pump fluence, which leads to irreversible structural changes, has been explored. New modes with frequency of 3.5/3.6 THz in polycrystalline/amorphous GST may be associated with Sb{sub 2}Te{sub 3} or GeTe{sub 4} tetrahedra, while a 4.2 THz mode observed in epitaxial GST may be related to segregation of Sb.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of a new charged charmoniumlike state in B ¯ 0 → J / ψ K – π + decays

We present the results of an amplitude analysis of B¯ 0 → J/ψK – π + decays. A new charged charmoniumlike state Z c (4200) + decaying to J/ψπ + is observed with a significance of 6.2σ. The mass and width of the Z c (4200) + are 4196$^{+31+17}_{–29–13}$ MeV/c 2 and 370$^{+70+70}_{–70–132}$ MeV, respectively; the preferred assignment of the quantum numbers is J P = 1 + . In addition, we find evidence for Z c (4430) + → J/ψπ + . In conclusion, the analysis is based on a 711 fb –1 data sample collected by the Belle detector at the asymmetric-energy e + e – collider KEKB.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A real-time laser feedback control method for the three-wave laser source used in the polarimeter-interferometer diagnostic on Joint-TEXT tokamak

A three-wave laser polarimeter-interferometer, equipped with three independent far-infrared laser sources, has been developed on Joint-TEXT (J-TEXT) tokamak. The diagnostic system is capable of high-resolution temporal and phase measurement of the Faraday angle and line-integrated density. However, for long-term operation (>10 min), the free-running lasers can lead to large drifts of the intermediate frequencies (∼100–∼500 kHz/10 min) and decay of laser power (∼10%–∼20%/10 min), which act to degrade diagnostic performance. In addition, these effects lead to increased maintenance cost and limit measurement applicability to long pulse/steady state experiments. To solve this problem, a real-time feedback control method of the laser source is proposed. By accurately controlling the length of each laser cavity, both the intermediate frequencies and laser power can be simultaneously controlled: the intermediate frequencies are controlled according to the pre-set values, while the laser powers are maintained at an optimal level. Based on this approach, a real-time feedback control system has been developed and applied on J-TEXT polarimeter-interferometer. Long-term (theoretically no time limit) feedback of intermediate frequencies (maximum change less than ±12 kHz) and laser powers (maximum relative power change less than ±7%) has been successfully achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evidence for an unorthodox firing sequence employed by the Berlin Painter. Deciphering ancient ceramic firing conditions through high-resolution material characterization and replication

XANES spectroscopy was used to complement the results previously obtained with Raman spectroscopy by the same group to determine the firing conditions used in the production of a single vessel painted by the Berlin Painter in the 5th century B.C. The vessel, part of the collection of the J. Paul Getty Museum, presents a complicated layered architecture of black and red gloss, with different stratigraphies present on the interior and exterior surfaces. The study of two samples, one each from the interior and exterior surface of the vessel, was performed with the complementary analytical techniques of X-ray nano- and micro-spectroscopy (X-ray fluorescence spectroscopy (XRF) and full-field transmission X-ray micro-spectroscopy (FF-XANES) across the Fe K edge), and supported by a replication study. The replicates, made in a laboratory furnace providing complete control over the firing temperature and oxygen partial pressure, provided a paradigm for the comparison of the mineralogical phases observed in the ancient samples, which led to a deeper understanding of the firing conditions necessary for the production of the Berlin Painter's vessel. Our results confirm the necessity of multiple firings and painting applications to obtain the Berlin Painter's architecture and provide a further example of the multiplicity of techniques and practices employed by the potters of the Kerameikos in ancient Athens.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Passivated Tunneling Contacts to N-Type Wafer Silicon and Their Implementation into High Performance Solar Cells: Preprint

We present a case that passivated contacts based on a thin tunneling oxide layer, combined with a transport layer with properly selected work function and band offsets, can lead to high efficiency c-Si solar cells. Passivated contacts contribute to cell efficiency as well as design flexibility, process robustness, and a simplified process flow. Material choices for the transport layer are examined, including transparent n-type oxides and n+-doped poly-Si. SiO2/n+-poly-Si full-area, induced-junction back surface field contacts to n-FZ and n-Cz Si are incorporated into high efficiency cells with deep, passivated boron emitters.

14 SOLAR ENERGY↗

Progress of neutral-beam-aided diagnostics on the HL-2A tokamak

A 32/64-channel Charge eXchange Recombination Spectroscopy (CXRS) and a 7-channel motional Stark effect (MSE) polarimeter have been developed on the HL-2A tokamak. To extract the maximum time resolution of the system, the incidence fibers of the spectrometer are pitch-controlled; and the double-slit fiber bundle can increase the spatial channels with one charge-coupled device detector. The ion temperature and plasma rotation with time and spatial resolutions up to 5 ms and 1 cm are obtained. Sawtooth oscillation, transition from intermediate phase (I phase) to high confinement mode (H mode) can be clearly observed by the CXRS. The spectrometer can be utilized as the main component of the MSE polarimeter, which can effectively overcome the weak Stark effect. The pitch angles of magnetic field are obtained for 7 spatial points covering 24 cm along major radius with time resolution of 40 ms.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High resolution polarimeter-interferometer system for fast equilibrium dynamics and MHD instability studies on Joint-TEXT tokamak (invited)

A high-performance Faraday-effect polarimeter-interferometer system has been developed for the J-TEXT tokamak. This system has time response up to 1 μs, phase resolution < 0.1° and minimum spatial resolution ∼15 mm. High resolution permits investigation of fast equilibrium dynamics as well as magnetic and density perturbations associated with intrinsic Magneto-Hydro-Dynamic (MHD) instabilities and external coil-induced Resonant Magnetic Perturbations (RMP). The 3-wave technique, in which the line-integrated Faraday angle and electron density are measured simultaneously by three laser beams with specific polarizations and frequency offsets, is used. In order to achieve optimum resolution, three frequency-stabilized HCOOH lasers (694 GHz, >35 mW per cavity) and sensitive Planar Schottky Diode mixers are used, providing stable intermediate-frequency signals (0.5–3 MHz) with S/N > 50. The collinear R- and L-wave probe beams, which propagate through the plasma poloidal cross section (a = 0.25–0.27 m) vertically, are expanded using parabolic mirrors to cover the entire plasma column. Sources of systematic errors, e.g., stemming from mechanical vibration, beam non-collinearity, and beam polarization distortion are individually examined and minimized to ensure measurement accuracy. Simultaneous density and Faraday measurements have been successfully achieved for 14 chords. Based on measurements, temporal evolution of safety factor profile, current density profile, and electron density profile are resolved. Core magnetic and density perturbations associated with MHD tearing instabilities are clearly detected. Effects of non-axisymmetric 3D RMP in ohmically heated plasmas are directly observed by polarimetry for the first time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗