Engineering Papers⌕ Search

Engineering topics

Liu, Xiaoyang

Publications and source records attributed to Liu, Xiaoyang.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Nanoscale elemental and morphological imaging of nitrogen-fixing cyanobacteria

Nitrogen-fixing cyanobacteria bind atmospheric nitrogen and carbon dioxide using sunlight. This experimental study focused on a laboratory-based model system, Anabaena sp., in nitrogen-depleted culture. When combined nitrogen is scarce, the filamentous prokaryotes reconcile photosynthesis and nitrogen fixation by cellular differentiation into heterocysts. To better understand the influence of micronutrients on cellular function, 2D and 3D synchrotron X-ray fluorescence mappings were acquired from whole biological cells in their frozen-hydrated state at the Bionanoprobe, Advanced Photon Source. To study elemental homeostasis within these chain-like organisms, biologically relevant elements were mapped using X-ray fluorescence spectroscopy and energy-dispersive X-ray microanalysis. Higher levels of cytosolic K + , Ca 2+ , and Fe 2+ were measured in the heterocyst than in adjacent vegetative cells, supporting the notion of elevated micronutrient demand. P-rich clusters, identified as polyphosphate bodies involved in nutrient storage, metal detoxification, and osmotic regulation, were consistently co-localized with K + and occasionally sequestered Mg 2+ , Ca 2+ , Fe 2+ , and Mn 2+ ions. Machine-learning-based k-mean clustering revealed that P/K clusters were associated with either Fe or Ca, with Fe and Ca clusters also occurring individually. In accordance with XRF nanotomography, distinct P/K-containing clusters close to the cellular envelope were surrounded by larger Ca-rich clusters. The transition metal Fe, which is a part of nitrogenase enzyme, was detected as irregularly shaped clusters. The elemental composition and cellular morphology of diazotrophic Anabaena sp. was visualized by multimodal imaging using atomic force microscopy, scanning electron microscopy, and fluorescence microscopy. This paper discusses the first experimental results obtained with a combined in-line optical and X-ray fluorescence microscope at the Bionanoprobe.

Anabaena sp↗
DOE OSTI2024

Elucidating the Transition of 3D Morphological Evolution of Binary Alloys in Molten Salts with Metal Ion Additives

Molten salts serve as effective high-temperature heat transfer fluids and thermal storage media used in a wide range of energy generation and storage facilities, including concentrated solar power plants, molten salt reactors and high-temperature batteries. However, at the salt–metal interfaces, a complex interplay of charge-transfer reactions involving various metal ions, generated either as fission products or through corrosion of structural materials, takes place. Simultaneously, there is a mass transport of ions or atoms within the molten salt and the parent alloys. The precise physical and chemical mechanisms leading to the diverse morphological changes in these materials remain unclear. Here, to address this knowledge gap, this work employed a combination of synchrotron X-ray nanotomography and electron microscopy to study the morphological and chemical evolution of Ni-20Cr in molten KCl-MgCl 2 , while considering the influence of metal ions (Ni 2+ , Ce 3+ , and Eu 3+ ) and variations in salt composition. Our research suggests that the interplay between interfacial diffusivity and reactivity determines the morphological evolution. The summary of the associated mass transport and reaction processes presented in this work is a step forward toward achieving a fundamental comprehension of the interactions between molten salts and alloys. Overall, the findings offer valuable insights for predicting the diverse chemical and structural alterations experienced by alloys in molten salt environments, thus aiding in the development of protective strategies for future applications involving molten salts.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Exploring Cr and molten salt interfacial interactions for molten salt applications

Molten salts play an important role in various energy-related applications such as high-temperature heat transfer fluids and reaction media. However, the extreme molten salt environment causes the degradation of materials, raising safety and sustainability challenges. A fundamental understanding of material–molten salt interfacial evolution is needed. This work studies the transformation of metallic Cr in molten 50/50 mol% KCl–MgCl 2 via multi-modal in situ synchrotron X-ray nano-tomography, diffraction and spectroscopy combined with density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. Notably, in addition to the dissolution of Cr in the molten salt to form porous structures, a δ-A15 Cr phase was found to gradually form as a result of the metal–salt interaction. This phase change of Cr is associated with a change in the coordination environment of Cr at the interface. DFT and AIMD simulations provide a basis for understanding the enhanced stability of δ-A15 Cr vs. bcc Cr, by revealing their competitive phase thermodynamics at elevated temperatures and probing the interfacial behavior of the molten salt at relevant facets. This study provides critical insights into the morphological and chemical evolution of metal–molten salt interfaces. Finally, the combination of multimodal synchrotron analysis and atomic simulation also offers an opportunity to explore a broader range of systems critical to energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Molecular beam epitaxy growth and characterization of GePb alloys

Pb based group-IV alloys such as GePb have been gaining interest as a potential alternative for infrared detectors, quantum materials, and high-speed electronic devices. Challenges remain in their growth due to the extremely low solid solubility of Pb in the Ge–Pb system. This paper reports molecular beam epitaxy growth of GePb alloy thin films on Ge(100) substrates. Effusion cells of Ge and Pb are used to control the flux ratio independently. The optimal substrate temperature is found to be near the thermocouple temperature of 300 °C based on the characterization of the grown films using high-resolution x-ray diffraction. A large change in the Ge:Pb beam equivalent pressure ratio from 10:1 to 1:1 results in only a minimal increase of the Pb composition from 0.74% to 2.84% as estimated from Raman spectroscopy and Rutherford backscattering spectrometry. Furthermore, scanning electron microscopy images show a large volume of Pb islands on the surface that form into either long trapezoidal rods or uniform droplets, with increasing Pb flux and growth time the density of Pb islands increased.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Redesigned Nylon 6 Variants with Enhanced Recyclability, Ductility, and Transparency

Abstract Geminal ( gem −) disubstitution in heterocyclic monomers is an effective strategy to enhance polymer chemical recyclability by lowering their ceiling temperatures. However, the effects of specific substitution patterns on the monomer's reactivity and the resulting polymer's properties are largely unexplored. Here we show that, by systematically installing gem ‐dimethyl groups onto ϵ‐caprolactam (monomer of nylon 6) from the α to ϵ positions, both the redesigned lactam monomer's reactivity and the resulting gem ‐nylon 6’s properties are highly sensitive to the substitution position, with the monomers ranging from non‐polymerizable to polymerizable and the gem ‐nylon properties ranging from inferior to far superior to the parent nylon 6. Remarkably, the nylon 6 with the gem ‐dimethyls substituted at the γ position is amorphous and optically transparent, with a higher T g (by 30 °C), yield stress (by 1.5 MPa), ductility (by 3×), and lower depolymerization temperature (by 60 °C) than conventional nylon 6.

Tian, Jun‐Jie↗
DOE OSTI2024

Redesigned Nylon 6 Variants with Enhanced Recyclability, Ductility, and Transparency

Geminal (gem−) disubstitution in heterocyclic monomers is an effective strategy to enhance polymer chemical recyclability by lowering their ceiling temperatures. However, the effects of specific substitution patterns on the monomer's reactivity and the resulting polymer's properties are largely unexplored. Here we show that, by systematically installing gem-dimethyl groups onto ϵ-caprolactam (monomer of nylon 6) from the α to ϵ positions, both the redesigned lactam monomer's reactivity and the resulting gem-nylon 6’s properties are highly sensitive to the substitution position, with the monomers ranging from non-polymerizable to polymerizable and the gem-nylon properties ranging from inferior to far superior to the parent nylon 6. Remarkably, the nylon 6 with the gem-dimethyls substituted at the γ position is amorphous and optically transparent, with a higher T g (by 30 °C), yield stress (by 1.5 MPa), ductility (by 3×), and lower depolymerization temperature (by 60 °C) than conventional nylon 6.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Determination of the Interfacial Energy between Graphene Nanoplatelets and Deuterated or Hydrogenated Polystyrene

The tracer diffusion coefficients of various graphene nanoplatelet-polystyrene (GNP-PS) systems were determined by using dynamic secondary ion mass spectrometry, which provided insights into the interactions within the polymer nanocomposite system. Bilayer films, where one contained trace amounts of deuterated polystyrene (dPS), were produced, and the interdiffusion was measured by detecting the position of the dPS interface. GNPs were placed in both or only one of the two layers. The diffusion coefficient was decreased when GNPs were present in both layers as compared to the samples without GNP, indicating an attractive interaction between GNP and polystyrene. Surprisingly, the coefficient increased relative to the control when GNPs were present only in the PS containing layer, whereas it decreased most strongly when GNP and dPS were present only in the same layer, indicating that an additional preference existed for GNPs and dPS. A significant difference in interfacial energies was measured using contact angle goniometry of PS or dPS droplets on flat GNP layers, confirming the preferential interaction. DFT calculations were used to calculate the interfacial interaction between GNP and dPS or PS, and they showed an attractive potential which was maximal when the PS rings were conformal with the GNP structure. Furthermore, the differential energy between PS and dPS at the GNP interface was in excellent agreement with the measured value. In contrast, contact angle goniometry indicated that the interaction between GNP and poly(methyl methacrylate) (PMMA) was unfavorable, and no difference in interfacial energy between dPMMA and PMMA was observed. Therefore, these techniques can provide a means for determining the relative affinity between GNP and different polymer hosts, which can be an important consideration in the mechanics and adhesion properties of the compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Temperature-Dependent Morphological Evolution during Corrosion of the Ni-20Cr Alloy in Molten Salt Revealed by Multiscale Imaging

Understanding the mechanisms leading to the degradation of alloys in molten salts at elevated temperatures is significant for developing several key energy generation and storage technologies, including concentrated solar and next-generation nuclear power plants. Specifically, the fundamental mechanisms of different types of corrosion leading to various morphological evolution characteristics for changing reaction conditions between the molten salt and alloy remain unclear. Here, in this work, the three-dimensional (3D) morphological evolution of Ni–20Cr in KCl–MgCl 2 is studied at 600 °C by combining in situ synchrotron X-ray and electron microscopy techniques. By further comparing different morphology evolution characteristics in the temperature range of 500–800 °C, the relative rates between diffusion and reaction at the salt–metal interface lead to different morphological evolution pathways, including intergranular corrosion and percolation dealloying. In this work, the temperature-dependent mechanisms of the interactions between metals and molten salts are discussed, providing insights for predicting molten salt corrosion in real-world applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Heterogeneous 3D Morphological Evolution of Ni Microparticles in Molten Salts: Visualized by Operando Synchrotron X-ray Nano-tomography

Ni-based superalloys are promising materials for high-temperature molten salt (MS) energy generation and storage. Studying morphological and chemical evolution of pure Ni in MS provides fundamental knowledge for MS technologies and corrosion mitigation. Here, in this study, real-time 3D morphological changes of Ni microparticles in molten KCl-MgCl 2 were studied by operando synchrotron X-ray nano-tomography at 700°C. Rapid Ni particle agglomeration occurred, without significant chemical reactions, such as oxide or chloride formation. The morphological growth evolved differently from classical coarsening or sintering behaviors and occurred nonuniformly, with other regions showing slight dissolution of Ni. Ni nanoparticles were found to be dispersed in many areas of the samples, either from microparticle dissolution or other radiation-induced nanoparticle formation mechanisms. This study discusses important factors, i.e., thermal gradient, amounts of salt and metals, and radiation effect, that influence morphological changes of materials in MS, critical for fundamental understanding of material–MS interactions as well as for practical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evolution of micro-pores in Ni–Cr alloys via molten salt dealloying

Porous materials with high specific surface area, high porosity, and high electrical conductivity are promising materials for functional applications, including catalysis, sensing, and energy storage. Molten salt dealloying was recently demonstrated in microwires as an alternative method to fabricate porous structures. The method takes advantage of the selective dissolution process introduced by impurities often observed in molten salt corrosion. This work further investigates molten salt dealloying in bulk Ni–20Cr alloy in both KCl–MgCl 2 and KCl–NaCl salts at 700 °C, using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction (XRD), as well as synchrotron X-ray nano-tomography. Micro-sized pores with irregular shapes and sizes ranging from sub-micron to several microns and ligaments formed during the process, while the molten salt dealloying was found to progress several microns into the bulk materials within 1–16 h, a relatively short reaction time, enhancing the practicality of using the method for synthesis. The ligament size increased from ~ 0.7 μm to ~ 1.3 μm in KCl–MgCl 2 from 1 to 16 h due to coarsening, while remaining ~ 0.4 μm in KCl–NaCl during 16 h of exposure. The XRD analysis shows that the corrosion occurred primarily near the surface of the bulk sample, and Cr 2 O 3 was identified as a corrosion product when the reaction was conducted in an air environment (controlled amount sealed in capillaries); thus surface oxides are likely to slow the morphological coarsening rate by hindering the surface diffusion in the dealloyed structure. 3D-connected pores and grain boundary corrosion were visualized by synchrotron X-ray nano-tomography. This study provides insights into the morphological and chemical evolution of molten salt dealloying in bulk materials, with a connection to molten salt corrosion concerns in the design of next-generation nuclear and solar energy power plants.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Kinetics and evolution of solid-state metal dealloying in thin films with multimodal analysis

Thin-film solid-state metal dealloying (thin-film SSMD) is an emerging technique that uses self-organization to design nanostructured thin films. The resulting 3D bicontinuous nanostructures are promising for a wide range of applications, such as catalysis and energy storage. In this work, we prepared thin films by SSMD using Ti-Cu as the parent alloy and Mg as the solvent. Using a multimodal approach, we combined synchrotron X-ray spectroscopy, diffraction, and high-resolution electron-based spectroscopy and imaging to study their morphological, structural, and chemical evolution. The processing-structure relationship was analyzed as a function of parent alloy composition and dealloying temperature and time. Morphological transitions from globular, to lamellar, to bicontinuous structures, in conjunction with a ligament size evolution, were identified as functions of the parent alloy composition. The dealloying rate increased with increasing concentration of interdiffusing elements (dissolving component) in the parent alloy. The parting limit, a dealloying compositional threshold, was systematically analyzed and determined to be 30%–40%. The order of crystalline phase formation is CuMg 2 , Cu 2 Mg, and Ti; the Ti phase first shows self-reorganization during dealloying, separate from the crystallization process. The coarsening in thin-film SSMD was identified and not entirely self-similar; in addition to the increase of ligament size over time, the formation of larger globular ligaments were also observed. This work furthers our fundamental understanding of thin-film SSMD and nanostructured thin-film design, where the thermodynamic and kinetic effects differ from the bulk counterparts. The fact that dealloying and diffusion outpaces the crystallization and new phase formation also offers opportunities to utilize thin-film SSMD in certain alloy systems in which deleterious intermetallic phases need to be suppressed, that may not be possible in the bulk geometry.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Electronic Structure Calculations of the Fundamental Interactions in Solvent Extraction Desalination

Solvent extraction desalination (SED) is a promising membrane-free desalination technology, but new solvents are still needed that can improve the molecular-level water selectivity, while minimizing solvent contamination in the aqueous phase. Improvements in solvent design for SED require a fundamental understanding of the molecular interactions governing solvation behavior. Herein, quantum chemical calculations are used to delineate different fundamental interactions in water-solvent systems involving 38 different solvents, with a particular focus on the role of the electrostatic potential characteristics. Furthermore, these interactions are rigorously analyzed using the independent gradient model based on Hirshfeld partition (IGMH), Symmetry-Adapted Perturbation Theory (SAPT), as well as the energy decomposition analysis based on force field (EDA-FF) to compare against a standard force field model. The solvation free energies and partition coefficients are also calculated to estimate water extraction performance in a bulk solvent system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quantifying the anion effect of gas solubility within ionic liquids using the solvation affinity index

The solubility of gas molecules within ionic liquids (ILs) is strongly dictated by the anion effect and the free volume effect, and of these two influences, the anion effect can be challenging to predict. We evaluate a wide range of different gas solutes (O 2 , NH 3 , CH 4 , H 2 S, SO 2 , Ar, H 2 , N 2 , CO 2 ) in different ILs, and we find that the solubility is strongly correlated to one of three different IL properties, which can be directly calculated from the anion electrostatic potential (ESP) surfaces. Thus, the solutes can be grouped into three fundamental types, leading to a general descriptor, the solvation affinity index (SAI), which can identify the affinity between a wide range of gas solutes and IL solvents. The SAI of nine common industrial gases with 47 common anions are generated. Furthermore, this can provide a fast approach for pre-screening IL solvents or even for ILs embedded within porous supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Computational and experimental study of different brines in temperature swing solvent extraction desalination with amine solvents

Rapid global urbanization and high-salinity wastewater disposal from industrial activities have exerted significant pressure on water resources. Over the past few years, temperature swing solvent extraction (TSSE) has been identified as a promising technique to desalinate hypersaline brines. Despite its potential, the TSSE desalination literature has been mainly based on empirical insights, and the limited molecular simulation studies have primarily focused on NaCl brines. Herein, we use molecular dynamics (MD) simulations to study the TSSE desalination of four different brines, namely, KCl, KBr, NaCl, and NaBr using diisopropylamine as the solvent. Based on both bulk and interfacial brine-diisopropylamine MD results, here we investigate the qualitative and quantitative performance of the simulations by benchmarking these results against our experimental evaluations of these same systems. MD results provide satisfactory qualitative agreement with the experimental data of water solubilization in the organic phase and amine solubilization in the aqueous phase for the KBr, KCl, and NaBr brines. Also, the molecular mechanism of solvation of ionic species by water molecules over diisopropylamine suggested by the MD simulations is in agreement with our experimental data. However, larger qualitative and quantitative deviations were observed for the NaCl brines, and this is likely due to polarization and charge transfer effects, as quantified by our quantum chemical calculations.

42 ENGINEERING↗
DOE OSTI2022

Dimensionality effect of conductive carbon fillers in LiNi 1/3 Mn 1/3 Co 1/3 O 2 cathode

Developing advanced electrode architectures through modifying active materials, conductive fillers, binders, and electrolytes as well as processing methods has drawn significant research interest. Due to the insufficient electrical conductivity of many active materials, adding conductive carbon fillers to composite electrodes provides the necessary electrical conductivity. The dimensionality effect among different conductive fillers has a significant impact on electrochemistry, which can be associated with morphological and chemical heterogeneities of electrodes. In this study, synchrotron X-ray mosaic nanotomography and X-ray spectroscopy nanoimaging provided direct three-dimensional (3D) visualization and quantification capabilities to investigate the dimensionality effects of Super P (SP) and single-walled carbon nanotube (SWCNT) fillers on the capacity retention of LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NMC111). The results indicate that NMC/SWCNT electrodes, with a wrapping effect from the SWCNTs, exhibited more homogeneous particle size distributions, morphological changes, and chemical states than NMC/SP electrodes, without the wrapping effect. This work developed a framework of 3D quantification methods to study the capacity fading behavior associated with morphological and chemical heterogeneities and paved the way toward designing electrodes for high rate energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2021

Visualizing time-dependent microstructural and chemical evolution during molten salt corrosion of Ni-20Cr model alloy using correlative quasi in situ TEM and in situ synchrotron X-ray nano-tomography

In situ monitoring of corrosion processes is important to fundamentally understand the kinetics and evolution of materials in harsh environments. A quasi in situ transmission electron microscopy technique was utilized to study microstructural and chemical evolution of a Ni-20Cr disc sample 6 exposed to molten KCl-MgCl 2 salt for 60 s in consecutive 20 s iterations. In situ synchrotron X-ray nano-tomography was performed to characterize the morphological evolution of a Ni-20Cr microwire exposed to molten KCl-MgCl 2 . Here, both techniques captured key corrosion events and revealed mechanisms at different time and length scales, potentially bringing greater insights and 10 deeper understanding beyond conventional analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Understanding Gas Absorption in Multivalent Ionic Liquids via Solute-Solvent Interaction Analyses

Solute-solvent interactions are often evaluated to understand and explain gas solubilities. This information is regularly used to interpret gas solubility and separation within ionic liquids (ILs). Here, we use several different quantum chemical and previous molecular dynamics simulation results to show that strong solute-solvent interactions neither lead to high solubility nor to high selectivity, with respect to other solutes. Instead, the solute-solvent interaction strength with different isolated IL ions is affected by the electrostatic extremes. Also, the solute-solvent interaction with different IL molecules is strongly correlated to the molecular volumes or polarizabilities (within a series of same-anion based ILs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗