Engineering Papers⌕ Search

Engineering topics

Liu, X

Publications and source records attributed to Liu, X.

100 records · Page 6

Evaluation of Electron Energy Spread in CsBr Based Photocathodes

Photocathodes with relatively low energy spread (<0.5 eV) are required for electron sources in several applications including single and multiple electron beam inspection and lithography tools and free electron lasers. CsBr based photocathodes have been shown to be very robust and capable of operation at high current density (>150 A/cm{sup 2}) with very long lifetime (approximately hundreds of hours/spot). Experimental results of the photoelectron energy spread obtained in CsBr films deposited on both metal and InGaN substrates will be presented in this paper.

36 MATERIALS SCIENCE↗

The Conversion and operation of the Cornell electron storage ring as a test accelerator (cesrta) for damping rings research and development

In March of 2008, the Cornell Electron Storage Ring (CESR) concluded twenty eight years of colliding beam operations for the CLEO high energy physics experiment. We have reconfigured CESR as an ultra low emittance damping ring for use as a test accelerator (CesrTA) for International Linear Collider (ILC) damping ring R&D. The primary goals of the CesrTA program are to achieve a beam emittance approaching that of the ILC Damping Rings with a positron beam, to investigate the interaction of the electron cloud with both low emittance positron and electron beams, to explore methods to suppress the electron cloud, and to develop suitable advanced instrumentation required for these experimental studies (in particular a fast x-ray beam size monitor capable of single pass measurements of individual bunches). We report on progress with the CESR conversion activities, the status and schedule for the experimental program, and the first experimental results that have been obtained.

43 PARTICLE ACCELERATORS↗

Thermal emittance and response time measurements of a GaN photocathode.

We present the measurements of thermal emittance and response time for a GaN photocathode illuminated with 5 ps pulses at 260 nm wavelength. The thermal emittance was measured downstream of a 100 kV dc gun using a solenoid scan with a wire scanner and a beam viewscreen and was found to be 1.35 {+-} 0.11 mm mrad normalized rms emittance per 1 mm rms of illuminated spot size. The response time of the photoemitted electrons was evaluated using a deflecting mode rf cavity synchronized to the laser pulses and was found to be prompt within the time resolution capability of our setup.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Semiconductor point defect concentration profiles measured using coherent acoustic phonon waves

Coherent acoustic phonon interferometry is used to quantitatively measure depth-dependent point defect concentrations in semiconductor systems with a depth range of the order of tens of microns. Using time-resolved pump-probe techniques, the optical response of ion-beam irradiated GaAs crystals is analyzed as a function of defect concentration ranging over four orders of magnitude. Varying the ion dose quantitatively relates changes in the optical response to local defect concentrations. Thermal annealing is shown to reduce the effect on the optical response, indicating recovery of the crystal lattice through self-interstitial-vacancy recombination.

36 MATERIALS SCIENCE↗

Interaction between Supersonic Disintegrating Liquid Jets and Their Shock Waves

We used ultrafast x radiography and developed a novel multiphase numerical simulation to reveal the origin and the unique dynamics of the liquid-jet-generated shock waves and their interactions with the jets. Liquid-jet-generated shock waves are transiently correlated to the structural evolution of the disintegrating jets. The multiphase simulation revealed that the aerodynamic interaction between the liquid jet and the shock waves results in an intriguing ambient gas distribution in the vicinity of the shock front, as validated by the ultrafast x-radiography measurements. The excellent agreement between the data and the simulation suggests the combined experimental and computational approach should find broader applications in predicting and understanding dynamics of highly transient multiphase flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High Thermal Conductivity of a Hydrogenated Amorphous Silicon Film

We measured the thermal conductivity {kappa} of an 80 {micro}m thick hydrogenated amorphous silicon film prepared by hot-wire chemical-vapor deposition with the 3{omega} (80-300 K) and the time-domain thermoreflectance (300 K) methods. The {kappa} is higher than any of the previous temperature dependent measurements and shows a strong phonon mean free path dependence. We also applied a Kubo based theory using a tight-binding method on three 1000 atom continuous random network models. The theory gives higher {kappa} for more ordered models, but not high enough to explain our results, even after extrapolating to lower frequencies with a Boltzmann approach. Our results show that this material is more ordered than any amorphous silicon previously studied.

14 SOLAR ENERGY↗

The Compressibility of a Natural Kyanite at 300 K

The compressional behaviour of a natural kyanite, (Al{sub 1.99}Fe{sub 0.01})SiO{sub 5}, has been investigated to about 17.5 GPa at 300 K using a diamond-anvil cell and synchrotron X-ray diffraction. The pressure-volume data fitted to the third-order Birch-Murnaghan equation of state (EoS) yield an isothermal bulk modulus (K{sub 0T}) of 192 {+-} 6 GPa and pressure derivative (K'{sub 0T}) of 6 {+-} 1. When K'{sub 0T} is fixed as 4, the derived K{sub 0T} is 201 {+-} 2 GPa. These values are in excellent agreement with most experimental determinations in the literature. Consequently, it can be concluded that the compressibility of kyanite under high pressures has been accurately constrained.

58 GEOSCIENCES↗

Evidence for Electronic Gap-Driven Metal-Semiconductor Transition in Phase-Change Materials

Phase-change materials are functionally important materials that can be thermally interconverted between metallic (crystalline) and semiconducting (amorphous) phases on a very short time scale. Although the interconversion appears to involve a change in local atomic coordination numbers, the electronic basis for this process is still unclear. Here, we demonstrate that in a nearly vacancy-free binary GeSb system where we can drive the phase change both thermally and, as we discover, by pressure, the transformation into the amorphous phase is electronic in origin. Correlations between conductivity, total system energy, and local atomic coordination revealed by experiments and long time ab initio simulations show that the structural reorganization into the amorphous state is driven by opening of an energy gap in the electronic density of states. The electronic driving force behind the phase change has the potential to change the interconversion paradigm in this material class.

36 MATERIALS SCIENCE↗

Equation of State of Tricalcium Phosphate, -Ca3(PO4)2, to Lower Mantle Pressures

The {gamma}-tricalcium phosphate phase ({gamma}-TCP), {gamma}-Ca{sub 3}(PO{sub 4}){sub 2}, is a high-pressure polymorph of tricalcium phosphate with a potential important implication as the reservoir of rare-earth elements and very large lithophile elements in the deep mantle. In situ synchrotron X-ray diffraction measurements of the {gamma}-TCP phase have been carried out using a diamond-anvil cell to 40.29 GPa at room temperature, with a methanol-ethanol mixture as the pressure medium. The pressures in the measurements have been determined by using gold metal as the internal pressure calibrant. The third-order Birch-Murnaghan equation of state fitted to the experimentally defined unit-cell parameters suggests for the {gamma}-TCP phase a density of {rho}{sub 0} = 3.461(1) g/cm{sup 3}, an isothermal bulk modulus of K{sub T} = 100.2(13) GPa, and first pressure derivative of K'{sub T} = 5.48(16). When K'{sub T} is fixed at 4, the derived K{sub T} is 113.1(12) GPa.

58 GEOSCIENCES↗