Engineering Papers⌕ Search

Engineering topics

Liu, W.

Publications and source records attributed to Liu, W..

At least 109 records · Page 6

The CONTIN algorithm and its application to determine the size distribution of microgel suspensions

We review a powerful regularization method, known as CONTIN, for obtaining the size distribution of colloidal suspensions from dynamic light scattering data. We show that together with the so-called L-curve criterion for selecting the optimal regularization parameter, the method correctly describes the average size and size distribution of microgel suspensions independently characterized using small-angle neutron scattering. In contrast, we find that when using the default regularization process, where the regularizer is selected via the “probability to reject” method, the results are not as satisfactory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature dependence of helium-implantation-induced lattice swelling in polycrystalline tungsten: X-ray micro-diffraction and Eigenstrain modelling

Using synchrotron X-ray micro-diffraction and Eigenstrain analysis the distribution of lattice swelling near grain boundaries in helium-implanted polycrystalline tungsten is quantified. Samples heat-treated at up to 1473 K after implantation show less uniform lattice swelling that varies significantly from grain to grain compared to as-implanted samples. An increase in lattice swelling is found in the vicinity of some grain boundaries, even at depths beyond the implanted layer. As a result, these findings are discussed in terms of the evolution of helium-ion-implantation-induced defects.

36 MATERIALS SCIENCE↗

Permeation of hydrogen in hastelloy C-276 alloy at high temperature

Tritium is generated by the interaction of neutrons with the lithium and beryllium in the molten salt reactors (MSRs), which use FLiBe as one of solvents of fluoride fuel. Tritium as by-product in the MSRs is an important safety issue because it could easily diffuse into environment through high temperature heat exchangers. The experimental technique of gas driven permeation has been used to investigate the transport parameter of hydrogen in Hastelloy C-276 which is considered as one of the candidate for structure materials. The measurements were carried out at the temperature range of 400-800 Celsius degrees with hydrogen loading pressures ranging from 5*10{sup 3} to 4*10{sup 4} Pa. The H diffusive transport parameters for Hastelloy C-276 follow an Arrhenius law in this temperature range. Regarding diffusivity and Sieverts' constant, Hastelloy C-276 has lower values compared with Ni201 alloy. The possible reason may be the trapping effects, which were formed by the alloying elements of Mo and Cr in the matrix. At the same time, the thin oxidation layer formed by the high Cr content could lead to a slower dissociation process of H{sub 2} at the surface. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effect of realistic 3D microstructure in crystal plasticity finite element analysis of polycrystalline Ti-5Al-2.5Sn

The effect of constitutive parameters and microstructure on the kinematic and constitutive responses within grains in a crystal plasticity finite element (CPFE) simulation of a polycrystalline titanium alloy are compared with experimental results. Finally, the simulation of a Ti- 5Al-2.5 Sn sample deformed in uniaxial tension at room temperature used a phenomenological power-law based CPFE model, which includes four families of slip systems commonly observed in structural metals with a hexagonal lattice structure.

36 MATERIALS SCIENCE↗

High-quality II-VI films grown on amorphous substrates using tunable tetradymite templates

We demonstrate the growth of highly oriented CdSe and ZnTe films at ~300 °C on amorphous substrates such as glass and flexible polyimide using ultrathin tetradymite buffer layers composed of Sb x Bi 2-x Te 3 alloys lattice-matched to the film overgrowth. This leads to significant improvement of the crystallinity, roughness, grain size, and pit density of the II-VI overlayer along with enhancement of the optoelectronic properties. For example, photoluminescence emission is observed at ~1.74 eV for optimized CdSe films, the same as in a single crystal reference. An in-plane carrier diffusion length of ~500 nm is inferred from transient optical data. The use of tetradymite buffer layers to control II-VI compound deposition on non-crystalline substrates is a promising route for large area optoelectronic applications such as photovoltaic, light-emission, or infrared detector devices.

36 MATERIALS SCIENCE↗

Multi-fluid model of a sun-grazing comet in the rapidly ionizing, magnetized low corona

Two Sun-grazing comets were recently imaged in the low solar corona by space telescopes in unprecedented detail, revealing a wide range of new phenomena. This sparked growing interest in the interaction of comets with the coronal plasma and magnetic field and their diagnostic potential as solar probes. However, interpretation of such rich observational data requires profound understanding of relevant physical processes in an unexplored regime. Here advanced numerical modeling can provide critical clues. To this end, we present a prototype, multi-fluid, magnetohydrodynamic model of a steady-state comet in the low solar corona. These simulation results are compared with previously modeled comets in the solar wind environment. By inspecting their projection and column densities, we find a dominance of O{sup 6+} ions in the cometary tail, which can explain the observed extreme ultraviolet emission. The tail is found to be comparable to recent EUV images of these comets. In addition, the comet tail appears wider when the observer's line of sight is perpendicular rather than parallel to the local magnetic field. This is opposite to the trend in the interplanetary space permeated in the solar wind, because the ratio between dynamic pressure and magnetic pressure is an order of magnitude smaller than at 1 AU. On the other hand, we find that iron ions in the comet head build up to a density comparable to that of oxygen ions, but are unlikely to form a visible tail because of the shorter mean free paths of the neutrals.

79 ASTRONOMY AND ASTROPHYSICS↗

Summary of BISON Development Activities: NEAMS FY14 Report

This summary report contains an overview of work performed under the work package entitled “FY2014 NEAMS INL-Engineering Scale Fuel Performance & Interface with RPL Tools.” A first chapter identifies the specific FY-14 milestones, providing a basic description of the associated work and references to related detailed documentation. Where applicable, a representative technical result is provided. A second chapter summarizes substantial additional work including 1) efforts to improve numerical convergence and contact in BISON, 2) development of capability to simulate hydrogen behavior in Zircaloy cladding and 3) efforts to enhance collaborative work with the Halden Research Program. A final chapter briefly outlines planned future work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Simulation of direct plasma injection for laser ion beam acceleration with a radio frequency quadrupole

The direct plasma injection scheme (DPIS) has been being studied at Institute of Modern Physics since several years ago. A C{sup 6+} beam with peak current of 13 mA, energy of 593 keV/u has been successfully achieved after acceleration with DPIS method. To understand the process of DPIS, some simulations have been done as follows. First, with the total current intensity and the relative yields of different charge states for carbon ions measured at the different distance from the target, the absolute current intensities and time-dependences for different charge states are scaled to the exit of the laser ion source in the DPIS. Then with these derived values as the input parameters, the extraction of carbon beam from the laser ion source to the radio frequency quadrupole with DPIS is simulated, which is well agreed with the experiment results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Post-growth thermal oxidation of wurtzite InN thin films into body-center cubic In{sub 2}O{sub 3} for chemical/gas sensing applications

Post-growth thermal oxidations of InN have been studied using high-resolution x-ray diffraction (HRXRD) and secondary ion-mass spectroscopy (SIMS). The InN thin films, having relative high crystal quality, were grown by metal–organic chemical vapor deposition (MOCVD) on c-sapphire substrates using InGaN/GaN buffer layers. HRXRD reveals that oxidation of wurtzite InN into body-center cubic In{sub 2}O{sub 3} occurred at elevated temperatures. A Si{sub 3}N{sub 4} encapsulation improves the crystal quality of In{sub 2}O{sub 3} oxidized by using conventional rapid thermal annealing (RTA) but it results in the presence of undesired metallic indium. Cycle-RTA not only improves the crystal quality but also avoids the byproduct of metallic indium. SIMS depth profile, using contaminate elements as the ‘interface markers,’ provide evidence that the oxidation of InN is dominated by oxygen inward diffusion mechanism. Together with the HRXRD results, we conclude that the crystal quality of the resultant In{sub 2}O{sub 3}/InN heterostructure is mainly controlled by the balance between the speeds of oxygen diffusion and InN thermal dissociation, which can be effectively tuned by cycle-RTA. The obtained In{sub 2}O{sub 3}/InN heterostructures can be fundamental materials for studying high speed chemical/gas sensing devices. - Graphical abstract: Oxidation of h-InN into bcc-In{sub 2}O{sub 3} has been realized at elevated temperatures. A Si{sub 3}N{sub 4} cap improves the crystal quality of In{sub 2}O{sub 3} oxidized by conventional RTA but it results in the presence of undesired metallic indium. Cycle-RTA not only improves the crystal quality but also avoids the byproduct of metallic indium. SIMS depth profiles provide evidence that the oxidation of InN is dominated by oxygen inward diffusion mechanism. The crystal quality of the resultant In{sub 2}O{sub 3}/InN heterostructure is mainly controlled by the balance between the speeds of oxygen diffusion and InN thermal dissociation, which can be effectively tuned by cycle-RTA. - Highlights: • Oxidation of h-InN into bcc-In{sub 2}O{sub 3} has been realized at elevated temperatures. • Si{sub 3}N{sub 4} cap improves In{sub 2}O{sub 3} quality obtained by RTA but results in undesired indium. • Cycle-RTA not only improves the quality but also avoids the byproduct of indium. • The oxidation of InN is dominated by oxygen inward diffusion mechanism. • Cycle-RTA tunes the speeds of oxygen diffusion and InN thermal dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Disproportionation of (Mg,Fe)SiO 3 perovskite in Earth's deep lower mantle

The mineralogical constitution of the Earth's mantle dictates the geophysical and geochemical properties of this region. Previous models of a perovskite-dominant lower mantle have been built on the assumption that the entire lower mantle down to the top of the D" layer contains ferromagnesian silicate [(Mg,Fe)SiO 3 ] with nominally 10 mole percent Fe. On the basis of experiments in laser-heated diamond anvil cells, at pressures of 95 to 101 gigapascals and temperatures of 2200 to 2400 kelvin, we found that such perovskite is unstable; it loses its Fe and disproportionates to a nearly Fe-free MgSiO 3 perovskite phase and an Fe-rich phase with a hexagonal structure. This observation has implications for enigmatic seismic features beyond ~2000 kilometers depth and suggests that the lower mantle may contain previously unidentified major phases.

Zhang, L.↗

Growth process and magnetic properties of α-FeSe nanostructures

Growth process and magnetic properties of PbO-type α-Fe{sub x}Se nanostructures with shape changing from nanocacti to nanopetals and then to nanosheets are investigated. With iron acetylacetonate [Fe(acac){sub 3}] and Se powder as raw materials, the diffusion process of Fe atoms dominates the synthesis of α-Fe{sub x}Se nanocacti following phase transitions from FeSe{sub 2} to Fe{sub 3}Se{sub 4} and finally to α-Fe{sub x}Se. When a mixed solution containing Se precursor and Fe(acac){sub 3} was used as the raw material, the formation of FeSe{sub 2} and Fe{sub 3}Se{sub 4} can be avoided and, bended α-Fe{sub x}Se nanopetals can be prepared at 345 °C, which became flat nanosheets with a [001] preferred orientation as extending the reaction time from 1 to 4 h. No superconducting transition occurs in the α-Fe{sub x}Se (0.84 ≤ x ≤ 1.05) nanostructures due to composition heterogeneity or size effect. Magnetic measurements indicate that an antiferromagnetic component with a Néel point at about 45 K dominates the magnetic properties of the α-Fe{sub 0.87}Se nanosheets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on space charge effect in an electrostatic ion analyzer applied to measure laser produced ions

The abundance of different ions produced by laser ion sources is usually analyzed by an electrostatic ion analyzer (EIA). Ion current intensities in the range of several mA/cm{sup 2} at the position of the EIA have been achieved from the laser ion source developed by the Institute of Modern Physics; this indicates that a noticeable influence of space charge effect during the ion transmission will occur. Hence, while the parameters of the EIA or the beams are changed, such as ion species, current intensity, the ions’ transmission efficiency through the EIA is different, which will result in an uncertainty in the estimation of the ions’ yields. Special attention is focused on this issue in this paper. Ion's transmissions through the EIA under different circumstances are studied with simulations and experiments, the results of which are consistent with each other.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Focused-ion-beam induced damage in thin films of complex oxide BiFeO{sub 3}

An unexpected, strong deterioration of crystal quality is observed in epitaxial perovskite BiFeO{sub 3} films in which microscale features have been patterned by focused-ion-beam (FIB) milling. Specifically, synchrotron x-ray microdiffraction shows that the damaged region extends to tens of μm, but does not result in measureable changes to morphology or stoichiometry. Therefore, this change would go undetected with standard laboratory equipment, but can significantly influence local material properties and must be taken into account when using a FIB to manufacture nanostructures. The damage is significantly reduced when a thin metallic layer is present on top of the film during the milling process, clearly indicating that the reduced crystallinity is caused by ion beam induced charging.

36 MATERIALS SCIENCE↗

Cryogenic system with GM cryocooler for krypton, xenon separation from hydrogen-helium purge gas

In the thorium molten salt reactor (TMSR), fission products such as krypton, xenon and tritium will be produced continuously in the process of nuclear fission reaction. A cryogenic system with a two stage GM cryocooler was designed to separate Kr, Xe, and H{sub 2} from helium purge gas. The temperatures of two stage heat exchanger condensation tanks were maintained at about 38 K and 4.5 K, respectively. The main fluid parameters of heat transfer were confirmed, and the structural heat exchanger equipment and cold box were designed. Designed concentrations after cryogenic separation of Kr, Xe and H{sub 2} in helium recycle gas are less than 1 ppb.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Exchange bias and antiferromagnetic interfacial exchange coupling in the mixed-spin oxide Li{sub 2/7}Ni{sub 5/7}O

We present a detailed study on magnetic properties of mixed spin oxide Li{sub 2/7}Ni{sub 5/7}O, where small ferromagnetic (FM) clusters (with averaged diameter of ∼18 Å) immersed with an antiferromagnetic (AFM) host. The exchange bias (EB) with shifts of the hysteresis loop along both the field and magnetization axes is found, which is due to the interfacial interaction between the FM clusters and the AFM host. An AFM interfacial exchange coupling is deduced from the exchange interactions between Ni ions. The type and strength of this interfacial exchange interaction are discussed in terms of the EB at low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗