Engineering Papers⌕ Search

Engineering topics

Liu, W.

Publications and source records attributed to Liu, W..

At least 55 records · Page 3

RIA Experimentation Benchmark

Significant developments have been applied to the Bison code to make it capable for Reactivity- Initiated Accident (RIA) simulations. This report documents efforts to demonstrate the current Bison capabilities for an RIA simulation with a comparison to experimental and benchmark data. A number of CABRI REP and CIP cases have been modeled and compared to experimental and other code prediction results. This work shows that Bison is capable of predicting thermal, mechanical, and fission gas release data in agreement with the experimental results and other fuel performance code predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Generic HLW Repository In Bedded Salt In Germany: Emplacement Technologies and Repository Designs - 18288

In Germany, a new site selection act for a repository for HLW and SNF entered into force in July 2013 and was amended in spring 2017 [1]. It stipulates that the safety of repository systems for heat-generating radioactive waste and spent nuclear fuel in different host rock formations be compared. This requires that generic repository concepts and adequate safety- and safety demonstration concepts for all potential host rock formations in Germany (salt, clay and crystalline rock) exist. For several decades, development of disposal concepts and safety analyses for a repository in a salt dome was prioritized while repository concepts for clay and crystalline rock have been taken into account for two decades only. So far, bedded salt formations have not been the subject of comparative investigations. Thus, in summer 2015, the Federal Ministry for Economic Affairs and Energy (BMWi) launched the R and D project KOSINA to develop repository designs and carry out safety analyses for different emplacement alternatives in a generic bedded salt formation and a generic salt pillow. KOSINA is an acronym for 'Concept development for a generic repository for heat-generating waste in bedded salt formations in Germany as well as development and testing of a safety and demonstration concept'. Together with its partners BGR, GRS, and IfG, DBE Technology GmbH has successfully carried out an almost three years lasting scientific programme, which will be concluded in April 2018. The core areas of the programme are the development of generic geologic models, including derivation of model parameters, the development of a safety and safety demonstration concept, the development of technical repository designs for four different emplacement alternatives, the analysis of geomechanical integrity, the evaluation of operational safety as well as the analysis of radiological consequences. An interim report, which compiles the basic data of the waste inventory, the repository design requirements, the data basis for geologic model developments, and the outline of a safety and safety demonstration concept, was already published in February 2016. The main achievements of the R and D project KOSINA are the development of four different repository designs, two per each generic geologic model (flat-bedded salt, salt pillow) based on thermomechanical calculations. This includes the implementation of a safety concept that provides containment of the radioactive materials with regard to the technical designs of waste packages, transport and emplacement technologies, and backfilling and sealing concepts. Furthermore, the integrity of the geologic barriers could be demonstrated for all four repository designs, and the long-term predictions showed no radiological releases during the demonstration period of one million years. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nature of lattice distortions in the cubic double perovskite Ba 2 NaOsO 6

In this paper, we present detailed calculations of the electric field gradient (EFG) using a point charge approximation in ${\mathrm{Ba}}_{2}{\mathrm{NaOsO}}_{6}$, a Mott insulator with strong spin-orbit interaction. Recent $^{23}\mathrm{Na}$ nuclear magnetic resonance (NMR) measurements found that the onset of local point symmetry breaking, likely caused by the formation of quadrupolar order [Chen, Pereira, and Balents, Phys. Rev. B 82, 174440 (2010)], precedes the formation of long range magnetic order in this compound [Lu et al., Nat. Commun. 8, 14407 (2017); Liu et al., Physica B 536, 863 (2018)]. An extension of the static $^{23}\mathrm{Na}$ NMR measurements as a function of the orientation of a 15 T applied magnetic field at 8 K in the magnetically ordered phase is reported. Broken local cubic symmetry induces a nonspherical electronic charge distribution around the Na site and thus finite EFG, affecting the NMR spectral shape. We combine the spectral analysis as a function of the orientation of the magnetic field with calculations of the EFG to determine the exact microscopic nature of the lattice distortions present in low temperature phases of this material. Finally, we establish that orthorhombic distortions, constrained along the cubic axes of the perovskite reference unit cell, of oxygen octahedra surrounding Na nuclei are present in the magnetic phase. Other common types of distortions often observed in oxide structures are considered as well.

36 MATERIALS SCIENCE↗

Superconductivity in the half-Heusler compound TbPdBi

We have studied the half-Heusler compound TbPdBi through resistivity, magnetization, Hall effect, and heat capacity measurements. A semimetal behavior is observed in its normal-state transport properties, which is characterized by a large negative magnetoresistance below 100 K. Notably, we find the coexistence of superconductivity and antiferromagnetism in this compound. The superconducting transition appears at 1.7 K, while the antiferromagnetic phase transition takes place at 5.5 K. The upper critical field H c2 shows an unusual linear temperature dependence, implying unconventional superconductivity. Moreover, when the superconductivity is suppressed by magnetic field, its resistivity shows plateau behavior, a signature often seen in topological insulators/semimetals. Furthermore, these findings establish TbPdBi as a platform for the study of the interplay between superconductivity, magnetism, and nontrivial band topology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron acceleration through two successive electron beam driven wakefield acceleration stages

Structure based wakefield acceleration may provide a viable approach for accelerating sufficiently large numbers of electrons and positrons at the high gradient needed to meet the luminosity, efficiency, and cost requirements of a future linear collider. An important step in proving its viability is the demonstration of acceleration in multiple stages. Here we show the results of the first experimental demonstration of staged two beam wakefield acceleration, conducted at the Argonne Wakefield Accelerator Facility (AWA), in which a 0.5 nC electron bunch gained equal amounts of energy in two stages (~2.4 MeV per stage, corresponding to an average acceleration gradient of ~70 MeV/m). Meanwhile 150MeV/m of acceleration in a single stage has been achieved. The demonstration experiment should be scalable to staged-acceleration at gradients of the order of 200 to 300 MeV/m. Furthermore, such a development would considerably reduce both the cost and footprint of both a future high-energy physics (HEP) collider, as well as future X-ray light sources.

43 PARTICLE ACCELERATORS↗

Pressure-tuned superconductivity and normal-state behavior in Ba ( Fe 0.943 Co 0.057 ) 2 As 2 near the antiferromagnetic boundary

Superconductivity in iron pnictides is unconventional and pairing may be mediated by magnetic fluctuations in the Fe sublattice. Pressure is a clean method to explore superconductivity in iron based superconductors by tuning the ground state continuously without introducing disorder. Here we present a systematic high pressure transport study in Ba (Fe 1 - x Co x ) 2 As 2 single crystals with x = 0.057, which is near the antiferromagnetic instability. Resistivity ρ = ρ 0 + AT n was studied under applied pressure up to 7.90 GPa. The parameter n approaches a minimum value of n ≈ 1 at a critical pressure P c = 3.65 GPa. Near P c , the superconducting transition temperature T c reaches a maximum value of 25.8 K. In addition, the superconducting diamagnetism at 2 K shows a sudden change around the same critical pressure. Finally, these results may be associated with a possible quantum critical point hidden inside the superconducting dome, near optimum T c .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Demonstration Of Fast, Single-Shot Photocathode QE Mapping Method Using Mla Pattern Beam

Quantum efficiency (QE) is the chief figure of merit in the characterization of photocathodes. Semiconductor photocathodes, especially when used in high rep-rate photoinjectors, are known to show QE degradation over time and must be replaced. The totalQE is the basic diagnosticwhich is used widely and is easy to obtain. However, a QE map indicating variations of QE across the cathode surface has greater utility. It can quickly diagnose problems of QE inhomogeneity. Most QE mapping techniques require hours to complete and are thus disruptive to a user facility schedule. A fast, single-shot method has been proposed using a micro-lens array (MLA) generated QE map. In this paper we report the implementation of the method at Argonne Wakefield Accelerator facility. A micro-lens array (MLA) is used to project an array of beamlets onto the photocathode. The resulting photoelectron beam in the form of an array of electron beamlets is imaged at a YAG screen. Four synchronized measurements are made and the results used to produce a QE map of the photocathode.

43 PARTICLE ACCELERATORS↗

Coherent Transition Radiation from Transversely Modulated Electron Beams

A transverse laser-shaping optical setup using microlens arrays (MLAs), previously developed and employed at Argonne Wakefield Accelerator (AWA), allows the formation of both highly uniform and modulated (patterned) beams. In the latter case, transverse modulation is imposed in the sub-millimeter scale. In the present study, we report the simulations of backward coherent transition radiation (CTR) emitted from a transversely modulated beam. We compare the case of a uniform round beam against different transverse modulation wavelengths by generating CTR on a steel target and measuring the autocorrelation function of the resulting radiation with an interferometer. We particularly focus on the differences between round and patterned beam distributions and discuss possible future applications of this setup in THz radiation generation.

43 PARTICLE ACCELERATORS↗

The effect of helium implantation on the deformation behaviour of tungsten: X-ray micro-diffraction and nanoindentation

Here, the effect of helium-implantation-induced defects on deformation behaviour is examined by comparing spherical nano-indents in unimplanted and helium-implanted regions of a tungsten single crystal. Helium-implantation increases hardness and causes large pileups. 3D-resolved X-ray micro-diffraction uniquely allows examination of the complex lattice distortions beneath specific indents. In the ion-implanted material we find reduced lattice rotations and residual strains due to indentation, indicating a more confined plastic zone. Together, our observations suggest that helium-induced defects initially act as efficient obstacles to dislocation motion, but are weakened by the subsequent passage of dislocations, causing a reduction in work hardening capacity.

36 MATERIALS SCIENCE↗