Engineering Papers⌕ Search

Engineering topics

Liu, Qi

Publications and source records attributed to Liu, Qi.

At least 73 records · Page 4

A monoclinic polymorph of sodium birnessite for ultrafast and ultrastable sodium ion storage

Sodium transition metal oxides with layered structures are attractive cathode materials for sodium-ion batteries due to their large theoretical specific capacities. However, these layered oxides suffer from poor cyclability and low rate performance because of structural instability and sluggish electrode kinetics. In the present work, we show the sodiation reaction of Mn 3 O 4 to yield crystal water free NaMnO 2–y–δ (OH) 2y , a monoclinic polymorph of sodium birnessite bearing Na/Mn(OH) 8 hexahedra and Na/MnO 6 octahedra. With the new polymorph, NaMnO 2–y–δ (OH) 2y exhibits an enlarged interlayer distance of about 7 Å, which is in favor of fast sodium ion migration and good structural stability. In combination of the favorable nanosheet morphology, NaMn 2–y–δ (OH) 2y cathode delivers large specific capacity up to 211.9 mAh g –1 , excellent cycle performance (94.6% capacity retention after 1000 cycles), and outstanding rate capability (156.0 mAh g –1 at 50 C). This study demonstrates an effective approach in tailoring the structural and electrochemical properties of birnessite towards superior cathode performance in sodium-ion batteries.

25 ENERGY STORAGE↗

BCC-Phased PdCu Alloy as a Highly Active Electrocatalyst for Hydrogen Oxidation in Alkaline Electrolytes

We report that anion-exchange membrane fuel cells hold promise to greatly reduce cost by employing nonprecious metal cathode catalysts. More efficient anode catalysts are needed, however, to improve the sluggish hydrogen oxidation reaction in alkaline electrolytes. We report that BCC-phased PdCu alloy nanoparticles, synthesized via a wet-chemistry method with a critical thermal treatment, exhibit up to 20-fold HOR improvement in both mass and specific activities, compared with the FCC-phased PdCu counterparts. HOR activity of the BCC-phased PdCu is 4 times or 2 times that of Pd/C or Pt/C, respectively, in the same alkaline electrolyte. In situ HE-XRD measurements reveal that the transformation of PdCu crystalline structure favors, at low annealing temperature (<300 °C), the formation of FCC structure. At higher annealing temperatures (300–500 °C), a BCC structure dominates the PdCu NPs. Density functional theory (DFT) computations unravel a similar H binding strength and a much stronger OH binding of the PdCu BCC surface (cf. FCC surface), both of which are simultaneously close to those of Pt surfaces. The synergistic optimization of both H and OH binding strengths is responsible for the enhancement of HOR activity on BCC-phased PdCu, which could serve as an efficient anode catalyst for anion-exchange membrane fuel cells. Lastly, this work might open a new route to develop efficient HOR catalysts from the perspective of crystalline structure transformation.

36 MATERIALS SCIENCE↗

Comparison of AC Losses of YBCO Circular Pancake Coils and Infinitely Long Stack Approximation

High-temperature superconducting (HTS) coils are key parts of many large-scale AC applications, such as transformers, superconducting magnetic energy storage, and motors. The estimation of AC losses of pancake coils is necessary for optimizing the design of HTS devices and cryogenic systems. To speed up the computation of AC losses, the numerical model of an infinitely long HTS stack is often utilized. An HTS stack is a good approximation of the circular coil only if the coil radius is sufficiently large, since AC losses will exhibit a stronger asymmetry along the radial direction for small values of coil radii. To assess the validation of an infinitely long stack approximation, the comparisons of AC losses between infinitely long stacks and circular coils with different radii are presented. The turn number varies from 10 to 80. We find that the AC losses of HTS circular coils will gradually increase to the same value as an infinitely long stack with increasing coil radii. A new parameter is proposed to quantitatively describe the correctness of infinitely long stack approximation. Finally, a method of AC loss estimation of HTS pancake coils is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modifying High-Voltage Olivine-Type LiMnPO 4 Cathode via Mg Substitution in High-Orientation Crystal

The LiMnPO4 material with Mg2+ ion substitution in transition metal site is successfully obtained by a facile solvothermal method combining with the subsequent spray drying and pyrolysis. The TEM image shows the controlled crystalline orientation of the primary Mg-doped LiMnPO4 particle, and the three-dimensional (3D) hierarchical micronano structure and the electronic structure of the Mg-doped material are investigated by the reconstructed nanotomography and X-ray absorption spectroscopy, respectively. The uniformity of Mg2+ ions substitution at the secondary particle level is confirmed by the transmission X-ray microscopy combined with X-ray absorption near edge structure. The prepared material exhibits an excellent electrochemical performance with the capacity of 156 mAh/g at the rate of 0.1 C, and good capacity retention of 100% after 400 cycles at the rate of 1 C. The in operando synchrotron X-ray diffraction data indicate that the performance improvement of the Mg-doped materials is attributed to the changed electrochemical reaction mechanism from the typical two-phase reaction for pristine LiMnPO4 material to the two-phase reaction combined with the single-phase (solid-solution) reaction process. These findings provide a new approach and understanding on developing high-energy cathode materials for lithium-ion batteries.

high orientation↗

Effect of Heat Treatment Conditions on Mechanical Properties and Precipitates in Sheet Metal Hot Stamping of 7075 Aluminum Alloy

Due to the low formability at room temperature, the application of 7XXX aluminum alloy sheet is limited. The hot forming-quenching process is an effective technology for the forming of some complex-shaped aluminum alloy parts. In this study, heat treatment was integrated with sheet metal stamping to improve formability and strength of 7075 aluminum alloy sheet. The effect of different heat treatment parameters on the strength of 7075 aluminum alloy sheet was investigated under stamping and heat treatment integrated process, based on which the optimal heat treatment combination was determined. Furthermore, the evolution of precipitates with the variation of aging temperature and time was studied by transmission electron microscope. In addition, quenching under water-cooled dies was conducted for 7075 aluminum alloy sheet after solution heat treatment, in which the hardness under die quenching was compared with that of underwater quenching and air quenching. Finally, the tensile test illustrates that, after die quenching and successive artificial aging, the tensile strength of 7075 aluminum alloy sheet was achieved at around 548 MPa. Shear fracture with long strip step-shaped pattern was observed in aging state.

36 MATERIALS SCIENCE↗

Empowering multicomponent cathode materials for sodium ion batteries by exploring three-dimensional compositional heterogeneities

Affordable sodium ion batteries hold great promise for revolutionizing stationary energy storage technologies. Sodium layered cathode materials are usually multicomponent transition metal (TM) oxides and each TM plays a unique role in the operating cathode chemistry, e.g., redox activity, structural stabilization. Engineering the three-dimensional (3D) distribution of TM cations in individual cathode particles can take advantage of a depth-dependent charging mechanism and enable a path towards tuning local TM–O chemical environments and building resilience against cathode–electrolyte interfacial reactions that are responsible for capacity fading, voltage decay and safety hazards. In this study, we create 3D compositional heterogeneity in a ternary and biphasic (O3–P3) sodium layered cathode material (Na 0.9 Cu 0.2 Fe 0.28 Mn 0.52 O 2 ). The cells containing this material deliver stable voltage profiles, and discharge capacities of 125 mA h g –1 at C/10 with almost no capacity fading after 100 cycles and 75 mA h g –1 at 1C with negligible capacity fading after 200 cycles. The direct performance comparison shows that this material outperforms other materials with similar global compositions but different mesoscale chemical distributions. Synchrotron X-ray spectroscopy/imaging and density functional theory studies reveal depth-dependent chemical environments due to changes to factors such as charge compensation and strength of orbital hybridization. Finally, 3D spectroscopic tomography illuminates the path towards optimizing multicomponent sodium layered cathode materials, to prevent the migration of TMs upon prolonged cycling. Furthermore, the study reports an inaugural effort of multifaceted and counterintuitive investigation of sodium layered cathode materials and strongly implies that there is plenty of room at the bottom by tuning nano/meso scale chemical distributions for stable cathode chemistry.

25 ENERGY STORAGE↗

Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping

Here, lithium cobalt oxides (LiCoO 2 ) possess a high theoretical specific capacity of 274 mAh/g. However, cycling LiCoO 2 -based batteries to voltages greater than 4.35 V vs. Li/Li + causes significant structural instability and severe capacity fade. Consequently, commercial LiCoO 2 exhibits a maximum capacity of only ~165 mAh/g. Here we develop a doping technique to tackle this long-standing issue of instability and thus increase the capacity of LiCoO 2 . La and Al are concurrently doped into Co-containing precursors, followed by high-temperature calcination with lithium carbonate. The dopants are found to reside in the crystal lattice of LiCoO 2 , where La works as a pillar to increase the c-axis distance and Al as a positively charged center, facilitating Li + diffusion, stabilizing the structure and suppressing the phase transition during cycling, even at a high cut-off voltage of 4.5 V. This doped LiCoO 2 displays an exceptionally high capacity of 190 mAh/g, cyclability with 96% capacity retention over 50 cycles and significantly enhanced rate capability.

25 ENERGY STORAGE↗

How does biochar influence soil N cycle? A meta-analysis

Modern agriculture is driving the release of excessive amounts of reactive nitrogen (N) from the soils to the environment, thereby threatening ecological balances and functions. The amendment of soils with biochar has been suggested as a promising solution to regulate the soil N cycle and reduce N effluxes. However, a comprehensive and quantitative understanding of biochar impacts on soil N cycle remains elusive. A meta-analysis was conducted to assess the influence of biochar on different variables involved in soil N cycle using data compiled across 208 peer-reviewed studies. On average, biochar beneficially increases symbiotic biological N2 fixation (63%), improves plant N uptake (11%), reduces soil N2O emissions (32%), and decreases soil N leaching (26%), but it poses a risk of increased soil NH3 volatilization (19%). Biochar-induced increase in soil NH3 volatilization commonly occurs in studies with soils of low buffering capacity (soil pH = 5, organic carbon = 10 g/kg, or clay texture), the application of high alkaline biochar (straw- or manure-derived biochar), or biochar at high application rate (>40 t/ha). Besides, if the pyrolytic syngas is not purified, the biochar production process may be a potential source of N2O and NOx emissions which correspond to 2–4% and 3–24% of the feedstock-N, respectively. This study suggests that to make biochar beneficial for decreasing soil N effluxes, clean advanced pyrolysis technique and adapted use of biochar are of great importance.

biochar, nitrogen cycle, soil, nitrous oxide, ammo↗

Inferring Geothermal Reservoir Processes at the Raft River Geothermal Field, Idaho, USA, Through Modeling InSAR-Measured Surface Deformation

Ground surface deformations detected with Interferometric Synthetic Aperture Radar (InSAR) provide valuable information for inferring subsurface reservoir processes that are difficult to observe directly. This study aims at building a reservoir model that honors the available geological, hydrological and geo-mechanical data and also produces ground surface deformation consistent with InSAR measurements at the Raft River Geothermal Field. In the thermo-hydro-mechanical (THM) coupled model developed, the reservoir deforms as a result of the rock’s poroelastic response to changes in hydrologic pressure and thermal expansion/contraction. The results indicate that the observed deformation is the result of pressure decrease in the deep production reservoir and pressure increase in a shallower reservoir that accommodates the injected fluid (likely in the Salt Lake Formation). The combination of the uplift around injection wells with subsidence around the production wells, affected by the Bridge Fault as a flow barrier, creates a complex pattern of surface deformation in which the center of subtle subsidence significantly deviates from the location of the production wells. A parametric study suggests that (1) the Bridge Fault Zone is likely a flow barrier, (2) the surface deformation appears to be insensitive to the presence of the Narrows Structure, and (3) additional flow barriers likely exist to shape the flow system. This case study demonstrates the utility of a high-fidelity forward model that honors available known information and THM coupled processes in understanding geothermal reservoir characteristics.

58 GEOSCIENCES↗

Efficient photocatalytic H2 production via rational design of synergistic spatially-separated dual cocatalysts modified Mn0.5Cd0.5S photocatalyst under visible light irradiation

Noble metal-free highly efficient cocatalysts are very important for cost efficient hydrogen fuel production. While most studies concentrate on single cocatalyst photocatalytic systems. Here, we report on the synthesis of Mn0.5Cd0.5S photocatalyst hetero-architecture with synergistic spatially separated dual cocatalysts Cu2-xS and MoS2 for highly efficient photocatalytic H-2 production. Through tactfully utilizing Cu2-xS/Mn0.5Cd0.5S nanoscale p-n junction to promote efficient transfer of photo-generated holes to Cu2-xS and MoS2 can be located exactly on the different positions where the photo-generated electrons must go through by photo-reduction of (NH4)(2)MoS4. Cu2-xS can be an oxidation active site to assemble photo-generated holes and MoS2 can capture and transport the photon-generated electrons. Therefore the photo-induced carriers can be efficiently separated and transferred to take part in photocatalytic reactions. The prepared Cu2-xS (0.015)/Mn0.5Cd0.5S/MoS2 (3 wt %) photocatalyst shows the highest H-2 production rate of 687.62 mu mol/h, which exceeds the rate of Mn0.5Cd0.5S and Mn0.5Cd0.5S loaded with Cu2-xS or MoS2 alone by 22, 1.7 and 3.48 times, respectively. This work provides a new thought to design efficient spatially separated and synergistic dual cocatalysts modified photocatalysts for H-2 production.

Dual cocatalysts↗

Breaking the Current‐Retention Dilemma in Cation‐Based Resistive Switching Devices Utilizing Graphene with Controlled Defects

Abstract Cation‐based resistive switching (RS) devices, dominated by conductive filaments (CF) formation/dissolution, are widely considered for the ultrahigh density nonvolatile memory application. However, the current‐retention dilemma that the CF stability deteriorates greatly with decreasing compliance current makes it hard to decrease operating current for memory application and increase driving current for selector application. By centralizing/decentralizing the CF distribution, this current‐retention dilemma of cation‐based RS devices is broken for the first time. Utilizing the graphene impermeability, the cation injecting path to the RS layer can be well modulated by structure‐defective graphene, leading to control of the CF quantity and size. By graphene defect engineering, a low operating current (≈1 µA) memory and a high driving current (≈1 mA) selector are successfully realized in the same material system. Based on systematically materials analysis, the diameter of CF, modulated by graphene defect size, is the major factor for CF stability. Breakthrough in addressing the current‐retention dilemma will instruct the future implementation of high‐density 3D integration of RS memory immune to crosstalk issues.

Zhao, Xiaolong↗

Three-dimensional hierarchical and interconnected honeycomb-like porous carbon derived from pomelo peel for high performance supercapacitors

The urgent need for sustainable development of human society has forced material scientists to explore novel materials starting from cheap natural precursors for next-generation energy storage devices by using environmentally friendly strategies. In this work, heteroatom-functionalized porous carbonaceous materials with 3D hierarchical and interconnected honeycomb-like structure have been successfully synthesized by using waste biomass pomelo peel as raw material through the combination of hydrothermal carbonization and followed KOH activation procedure. Benefiting from the unique honeycomb-like structure and high specific surface area, the as-obtained carbon material exhibits satisfactory capacitive behavior: 374 F/g at 0.1 A/g; excellent cycling stability of 92.5% capacitance retention over continuous 5000 cycles. More importantly, the as-assembled symmetric supercapacitors based on as-prepared electrode material can deliver high gravimetric and volumetric energy density of 20 W h/kg and 18.7 W h/L in 6 M KOH, respectively, as well as outstanding cycling stability. The obtained results demonstrate the possibility for taking full advantage of sustainable and large scale advanced carbon materials by choosing waste biomass, particularly the pomelo peel as a raw material. - Graphical abstract: 3D hierarchical and interconnected honeycomb-like porous carbonaceous materials (HPGC) from waste biomass (pomelo peels) were successfully prepared through the combination of hydrothermal carbonization and followed KOH activation procedure. The as-obtained carbon material exhibits satisfactory capacitive behavior. The obtained results demonstrate the possibility for taking full advantage of sustainable carbon materials by choosing biomass waste provided by nature as raw materials. Display Omitted - Highlights: • Pomelo peel was utilized to fabricate heteroatom-functionalized porous carbonaceous materials. • The as-prepared carbon materials contains 3D hierarchical and interconnected honeycomb-like structure. • The obtained carbon material and symmetric device exhibits superior electrochemical performances for supercapacitor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗