Engineering Papers⌕ Search

Engineering topics

Liu, Li-Min

Publications and source records attributed to Liu, Li-Min.

16 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Water dissociation at the water–rutile TiO 2 (110) interface from ab initio-based deep neural network simulations

The interaction of water with TiO 2 surfaces is of crucial importance in various scientific fields and applications, from photocatalysis for hydrogen production and the photooxidation of organic pollutants to self-cleaning surfaces and bio-medical devices. In particular, the equilibrium fraction of water dissociation at the TiO 2 –water interface has a critical role in the surface chemistry of TiO 2 , but is difficult to determine both experimentally and computationally. Among TiO 2 surfaces, rutile TiO 2 (110) is of special interest as the most abundant surface of TiO 2 ’s stable rutile phase. While surface-science studies have provided detailed information on the interaction of rutile TiO 2 (110) with gas-phase water, much less is known about the TiO 2 (110)–water interface, which is more relevant to many applications. In this work, we characterize the structure of the aqueous TiO 2 (110) interface using nanosecond timescale molecular dynamics simulations with ab initio-based deep neural network potentials that accurately describe water/TiO 2 (110) interactions over a wide range of water coverages. Simulations on TiO 2 (110) slab models of increasing thickness provide insight into the dynamic equilibrium between molecular and dissociated adsorbed water at the interface and allow us to obtain a reliable estimate of the equilibrium fraction of water dissociation. We find a dissociation fraction of 22 ± 6% with an associated average hydroxyl lifetime of 7.6 ± 1.8 ns. These quantities are both much larger than corresponding estimates for the aqueous anatase TiO 2 (101) interface, consistent with the higher water photooxidation activity that is observed for rutile relative to anatase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Realizing Two-Electron Transfer in Ni(OH) 2 Nanosheets for Energy Storage

The theoretical capacity of a given electrode material is ultimately determined by the number of electrons transferred in each redox center. The design of multi-electron transfer processes could break through the limitation of one–electron transfer and multiply the total capacity, but is difficult to achieve because multiple electron transfer processes are generally thermodynamically and kinetically more complex. In this work, we report the discovery of two-electron transfer in monolayer Ni(OH) 2 nanosheets, which contrasts with the traditional one-electron transfer found in multilayer materials. The first-principles calculations predict that the first oxidation process from Ni 2+ →Ni 3+ occurs easily, whereas the second electron transfer from Ni 3+ →Ni 4+ is strongly hindered in multilayer materials by both the interlayer hydrogen bonds and the domain H structure induced by the Jahn-Teller distortion of the Ni 3+ (t 2g 6 e g 1 ) centered octahedra. In contrast, the second electron transfer can easily occur in monolayers because all H’s are fully exposed. Experimentally, the as-prepared monolayer is found to deliver an exceptional redox capacity of ~ 576 mAh/g, nearly two times the theoretical capacity of one-electron processes. In-situ experiments demonstrate that monolayer Ni(OH) 2 can transfer two electrons and mostly transform to Ni 4+ in the charging process, while bulk Ni(OH) 2 can be partially transformed . Our work reveals a new redox reaction mechanism in atomically thin Ni(OH) 2 nanosheets, and suggests a promising path towards tuning the electron transfer numbers to multiply the capacity of the relevant energy storage materials.

25 ENERGY STORAGE↗
DOE OSTI2021

Structure and Oxygen Evolution Activity of β-NiOOH: Where Are the Protons?

Ni oxides and oxyhydroxides (NiO x ) have been studied for a long time as cathode materials for alkaline batteries and electrocatalysts for the oxygen evolution reaction (OER). Yet, understanding of the connection between their atomic and electronic structures and electrochemical performance or stability is still incomplete. In this work, we use first-principles density functional theory (DFT) calculations to revisit the structure, electronic properties, and OER activity of β-NiOOH, the catalytically active phase of NiO x . Following extensive DFTbased screening, we identify a hitherto overlooked structure characterized by a uniform distribution of H atoms on the NiO 2 layers. All the Ni 3+ cations in this structure exhibit an identical t g 6 e g 1 electronic configuration with an occupied 3d z2 orbital. Comparison of the calculated bond lengths with extended X-ray absorption fine structure (EXAFS) data unequivocally supports this structure relative to all other low-energy configurations. Based on this structure, we uncover and detail defect-dominated OER mechanisms on the basal β-NiOOH (001) surface, with overpotentials as low as 0.39 V. The present results should provide a valuable contribution to ongoing efforts for understanding and developing enhanced transition-metal hydroxide catalysts for the OER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Photoexcitation of bulk polarons in rutile TiO 2

The excitation of surface-localized polaronic states has recently been discussed as an additional photocatalytic channel to band gap excitation for rutile TiO 2 . A contribution from photoexcitation of bulk polarons could, in principle, provide a greater contribution because of their higher number and their protection from oxidation. However, determining such a contribution to the photoyield is challenging and has not been achieved thus far. In this work, we use two photon photoemission spectroscopy measurements to separate bulk and surface polaron photoexcitation. We find that bulk polarons are less bound by 0.2 eV compared with polarons at the surface, consistent with our results of hybrid density functional theory calculations. Because the excited state is also shifted to higher energy, bulk polarons have the same photoexcitation resonance energy as at the surface (3.6 eV) with a threshold at 3.1 eV. This is degenerate with the band gap, suggesting that bulk polarons could also provide an additional contribution to the photoyield.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Structure and reactivity of highly reduced titanium oxide surface layers on TiO 2 : A first-principles study

Titanium oxide structures featuring highly reduced TiO x films on top of nearly stoichiometric TiO 2 hold promise for applications ranging from photocatalysis to resistance switching devices. In this article, we focus on titanium monoxide (TiO) layers on anatase TiO 2 (001) and use first principles calculations to investigate their structure and properties as well as their interface with liquid water. We find that only a single TiO layer can grow epitaxially on anatase (001) and subsequent growth leads to the formation of TiO islands. The TiO layers decrease the work function and enhance the surface conductivity in comparison to pure anatase, two features that can improve the TiO 2 performance in photocatalytic hydrogen evolution but are thermodynamically unstable relative to pure TiO 2 in humid/aqueous environment. Furthermore, first principles molecular dynamics simulations of the TiO (001)-water and anatase (001)-water interfaces show that unlike the multilayer structure of interfacial water on the anatase surface, a very dense and tightly packed first water layer is present on the surface of TiO, which could represent the first stage of partial surface reoxidation.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Site dependent reactivity of Pt single atoms on anatase TiO 2 (101) in an aqueous environment

The TiO 2 –Pt–water interface is of great relevance in photocatalysis where Pt is widely used as a co-catalyst for The TiO 2 –Pt–water interface is of great relevance in photocatalysis where Pt is widely used as a co-catalyst for enhancing hydrogen evolution in aqueous TiO 2 . Using ab initio molecular dynamics, we investigated this interface focusing on Pt single atoms supported on anatase TiO 2 (101) in a water environment. Based on recent experiments showing a broad distribution of Pt coordination sites in TiO 2 , we examined six distinct single-Pt supported species with different nominal Pt oxidation states, namely: Pt, PtOH, and PtO 2 species adsorbed on the stoichiometric surface; Pt adsorbed at a surface oxygen vacancy (O v ); and Pt substituting a surface Ti cation (PtTi), both without and with an accompanying O v (Pt Ti + O v ). As found for the pristine anatase surface, interfacial water remained intact in the presence of a nearly neutral Pt adatom within the time duration of our simulations (~15 ps). Similarly, no (or only temporary) water dissociation was observed at the Pt Ti + O v and PtO 2 interfaces, due to the formation of very stable planar Pt coordination structures that interact only weakly with water. In contrast, water dissociated with OH – (H + ) on the Pt atom when this substituted a surface Ti (oxygen) ion as well as on PtOH. Lastly, the significant proton affinity of Pt atoms at surface oxygen vacancies suggests that negatively charged Pt species are particularly efficient at catalyzing hydrogen evolution in aqueous TiO 2 .hydrogen evolution in aqueous TiO 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2019

Understanding the Influence of Cation Doping on the Surface Chemistry of NaTaO 3 from First Principles

Sodium tantalate, NaTaO 3 , has attracted interest as one of the few photocatalysts capable to perform overall water splitting, that is, simultaneously produce oxygen and hydrogen from water. In particular, an interesting and not fully understood observation is that the efficiency of NaTaO 3 increases dramatically in the presence of cation doping. To obtain better insight into the origin of this effect, we use first- principles calculations to investigate the fundamental structural, electronical, and chemical properties of pristine and Sr-doped NaTaO 3 , a system for which several experimental studies have recently become available. Our results show that Sr donor-acceptor codoping at Na and Ta sites significantly reduces the formation energy of the Sr dopants. Further study of the energetics of the oxygen evolution reaction (OER) shows a substantial reduction of the OER overpotential for the codoped material, consistent with recent suggestions that codoping is crucial for increasing NaTaO 3 ’s efficiency. Finally, the detailed insights provided by our work could benefit the design and preparation of new efficient catalysts based on NaTaO 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2019

Injection of oxygen vacancies in the bulk lattice of layered cathodes

Surfaces, interfaces, and grain boundaries are, classically, known to be sinks at which defects generated within bulk lattice will preferentially migrate to and get annihilated, therefore rejuvenating a crystalline lattice to restore the intended functionalities.1, 2, 3 Here we report an inverse case by which the defects generated at the particle surface are continuously pumped into the bulk lattice and consequentially compromising the intended functionalities. We discovered that during the operation of a rechargeable battery, oxygen vacancies generated at cathode particle surfaces migrate toward inside of a perfect lattice in lithium-rich layered cathodes, featuring electrochemical driven surface vacancy creation, injection and condensation phenomenon and revealing an unrecognized surface process induced bulk lattice degradation featured with void formation and lattice reorganization. This process is associated with a high-cutoff voltage at which the anionic redox is activated. Coupling with calculations, we substantiate that triggering of anionic redox leads to sharply lowering of both formation energy of oxygen vacancy and migration barrier of oxidized oxide ions, therefore enabling migration of oxygen vacancy via oxidized oxide ion and leading to the injection of oxygen vacancy generated at the particle surface into the bulk lattice. This work unveils unpredicted behavior of oxidized oxide ion, leading to essential insight for designing of high capacity cathode for better batteries through coupled cationic and anionic redox dynamics in layered cathodes. In a broad term, this work provides insight on the intimate coupling between interfacial process and bulk lattice behavior for governing electrode functionality.

Yan, Pengfei↗
DOE OSTI2019

Trifunctional Electrode Additive for High Active Material Content and Volumetric Lithium-Ion Electrode Densities

The use of electrode additives such as binder and conductive additive (CA) in addition to high pore volume for electrolytes, results in reduced volumetric energy densities of all battery electrodes. Here, it is proposed to use poly(furfuryl alcohol) (PFA) conductive resin as a trifunctional electrode additive to replace polyvinylidene fluoride (PVDF) and CA while simultaneously enabling low porosity electrode function. The resultant PFA binder has a long-range ordered structure of conjugated diene, which allow electronic conductivity that leads to a CA-free electrode fabrication process. The oxygen heteroatoms in the PFA structure reduce the diffusion barriers of lithium ions, lowers the amount of required electrolyte/pore volume and thus, increasing electrode density. Serving as a trifunctional electrode additive, a high electrode density of 2.65 g cm -3 of the LiFePO 4 (LFP) electrode and therefore the highest volumetric energy density of 1551 Wh L -1 so far. The LFP electrode using PFA binder can achieve a capacity retention of ≈ 80% and Coulombic efficiency of over 99.9% after cycling for 500 times. The presented in situ polymerization strategy could revolutionize the electrode process, with the advantages of being simple, environmentally friendly, and easily scalable to industrial applications.

25 ENERGY STORAGE↗
DOE OSTI2017

Direct observation of multiple rotational stacking faults coexisting in freestanding bilayer MoS 2

Electronic properties of two-dimensional (2D) MoS 2 semiconductors can be modulated by introducing specific defects. One important type of defect in 2D layered materials is known as rotational stacking fault (RSF), but the coexistence of multiple RSFs with different rotational angles was not directly observed in freestanding 2D MoS 2 before. In this report, we demonstrate the coexistence of three RSFs with three different rotational angles in a freestanding bilayer MoS 2 sheet as directly observed using an aberration-corrected transmission electron microscope (TEM). Our analyses show that these RSFs originate from cracks and dislocations within the bilayer MoS 2 . First-principles calculations indicate that RSFs with different rotational angles change the electronic structures of bilayer MoS 2 and produce two new symmetries in their bandgaps and offset crystal momentums. Therefore, employing RSFs and their coexistence is a promising route in defect engineering of MoS 2 to fabricate suitable devices for electronics, optoelectronics, and energy conversion.

Science & Technology - Other Topics↗
DOE OSTI2016

Water at Interfaces

The interfaces of neat water and aqueous solutions play a prominent role in many technological processes and in the environment. Examples of aqueous interfaces are ultrathin water films that cover most hydrophilic surfaces under ambient relative humidities, the liquid/solid interface which drives many electrochemical reactions, and the liquid/vapor interface, which governs the uptake and release of trace gases by the oceans and cloud droplets. In this work, we review some of the recent experimental and theoretical advances in our knowledge of the properties of aqueous interfaces and discuss open questions and gaps in our understanding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗