Engineering Papers⌕ Search

Engineering topics

Liu, Jun

Publications and source records attributed to Liu, Jun.

916 records · Page 51

The durability dependence of Pt/CNT electrocatalysts on the nanostructures of carbon nanotubes: hollow- and bamboo-CNTs

The electrochemical durability of Pt/CNT with hollow- and bamboo-structured carbon nanotubes as the support for PEM fuel cells was investigated using cyclic voltammetry (CV, 0.6-1.1V) accelerated degradation test method. Pt/CNT catalysts were characterized with cyclic voltammograms, rotating disk electrodes, and TEM images. The changes in the electrochemical surface area of Pt and the activity toward oxygen reduction reaction (ORR) before and after the degradation indicate that bamboo-structured carbon nanotubes supported Pt (Pt/B-CNT) catalyst exhibited much higher durability. TEM images indicate that the sintering of Pt nanoparticles was much less for Pt/B-CNT. These are attributed to the specific bamboo-like nanostructures which provide more “bamboo-knot” defects and edge plane-like defects. Pt-support interaction was therefore enhanced and the durability was improved.

30 DIRECT ENERGY CONVERSION↗

Crystal and Electronic Structure of Lithiated Nanosized RutileTiO2 by Electron Diffraction and Electron Energy-loss Spectroscopy

The electronic structure of the nanosized rutile TiO2 before and after mechanical lithiation were studied using TEM and EELS. EELS reveals the Li K-edge at the energy-loss position of ~ 61 eV. After lithiation, the separation of the t2g-eg crystal-field splitting on both Ti L2,3-edge and O K-edge decreases, the O K-edge shifts towards a higher energy-loss position and the separation between the pre-edge peak and main peak on the O K-edge decreases. These results suggest that the lithiation of rutile TiO2 was accompanied by the reduction of Ti ion and a charge transfer from Li to Ti.

36 MATERIALS SCIENCE↗

Critical Material and Process Issues for CO2 Separation from Coal-Powered Plants

Concentrating CO2 from the dilute coal combustion or gasification gas stream to a level suitable for sequestration purposes represents a major cost factor to curtail CO2 emissions by capture and sequestration schemes. This paper provides a short review of CO2 capture incentives, current separation processes, and research progress of various new technologies. Technically, CO2 can be separated out of a gas mixture by all the methods discussed in this work, such as distillation, absorption, adsorption, gas/solid reaction, membrane, electrochemical pump, hydrate formation, etc. The challenge lies in determining which approach is the most practical or feasible, and ultimately the most cost-efficient. Important material issues and their impacts on the process viability will be discussed.

01 COAL, LIGNITE, AND PEAT↗

Enhanced Activity and Stability of Pt catalysts on Functionalized Graphene Sheets for Electrocatalytic Oxygen Reduction

Electrocatalysis of oxygen reduction using Pt nanoparticles supported on functionalized graphene sheets (FGSs) was studied. FGSs were prepared by thermal expansion of graphite oxide. Pt nanoparticles with average diameter of 2 nm were uniformly loaded on FGSs by impregnation methods. Pt-FGS showed a higher electrochemical surface area and oxygen reduction activity with improved stability as compared with commercial catalyst. Transmission electron microscopy, X-ray photoelectron spectroscopy, and electrochemical characterization suggest that the improved performance of Pt-FGS can be attributed to smaller particle size and less aggregation of Pt nanoparticles on the functionalized graphene sheets.

durability↗

Probing Porosity and Pore Interconnectivity in Crystalline Mesoporous TiO2 Using Hyperpolarized Xe-129 NMR

Hyperpolarized (HP) 129Xe NMR was used to probe the porosity and interconnectivity of pores in crystalline mesoporous TiO2. We have demonstrated that HP 129Xe NMR can be used to differentiate between similar sized pores within different crystalline phases. Pores of 4 nm size resident in mixed anatase and rutile mesoporous TiO2 phases were identified. Complementary to other techniques, HP 129Xe NMR is able to probe the interconnectivity between pores present in these different phases. The cross peaks in 2D exchange (EXSY) NMR spectra between the signals of xenon in two types of pores on millisecond time scale are clearly visible, indicating substantial pore interconnectivity. Information on porosity and interconnectivity is critical for understanding Li ion transport mechanisms in mesoporous TiO2 anode materials.

36 MATERIALS SCIENCE↗

Self-assembled TiO2-Graphene Hybrid Nanostructures for Enhanced Li-ion Insertion

We used anionic sulfate surfactants to assist the stabilization of graphene in aqueous solutions and facilitate the self-assembly of in-situ grown nanocrystalline TiO2, rutile and anatase, with graphene. These nanostructured TiO2-graphene hybrid materials were used for investigation of Li-ion insertion properties. The hybrid materials showed significantly enhanced Li-ion insertion/extraction in TiO2. The specific capacity was more than doubled at high charge rates, as compared with the pure TiO2 phase. The improved capacity at high charge-discharge rate may be attributed to increased electrode conductivity in presence of a percolated graphene network embedded into the metal oxide electrodes.

25 ENERGY STORAGE↗

Long life lithium batteries with stabilized electrodes

The present invention relates to non-aqueous electrolytes having electrode stabilizing additives, stabilized electrodes, and electrochemical devices containing the same. Thus the present invention provides electrolytes containing an alkali metal salt, a polar aprotic solvent, and an electrode stabilizing additive. In some embodiments the additives include a substituted or unsubstituted cyclic or spirocyclic hydrocarbon containing at least one oxygen atom and at least one alkenyl or alkynyl group. When used in electrochemical devices with, e.g., lithium manganese oxide spinel electrodes or olivine or carbon-coated olivine electrodes, the new electrolytes provide batteries with improved calendar and cycle life.

25 ENERGY STORAGE↗

Directed spatial organization of zinc oxide nanostructures

A method for controllably forming zinc oxide nanostructures on a surface via an organic template, which is formed using a stamp prepared from pre-defined relief structures, inking the stamp with a solution comprising self-assembled monolayer (SAM) molecules, contacting the stamp to the surface, such as Ag sputtered on Si, and immersing the surface with the patterned SAM molecules with a zinc-containing solution with pH control to form zinc oxide nanostructures on the bare Ag surface.

36 MATERIALS SCIENCE↗

The Corrosion of PEM Fuel Cell Catalyst Supports and Its Implications for Developing Durable Catalysts

Studying the corrosion behavior of catalyst support materials is of great significance for understanding the degradation of PEM fuel cell performance and developing durable catalysts. The oxidation of Vulcan carbon black (the most widely-used catalyst support for PEM fuel cells) was investigated using various electrochemical stressing methods (fixed-potential holding vs. potential step cycling), among which the potential step cycling was considered to mimic more closely the real drive cycle operation of vehicle PEM fuel cells. The oxidation of carbon was accelerated under potential step conditions as compared with the fixed-potential holding condition. Increasing potential step frequency or decreasing the lower potential limit in the potential step can further accelerate the corrosion of carbon. The accelerated corrosion of carbon black was attributed to the cycle of consumption/regeneration of some easily oxidized species. These findings are being employed to develop a test protocol for fast screening durable catalyst support.

30 DIRECT ENERGY CONVERSION↗

Self-assembled Materials for Catalysis

The purpose of this review is to highlight developments on self-assembled nanostructured materials (i.e. mesoporous and nanoparticle based materials) and their catalytic applications. Since there are some reviews available for metal-based nanoparticles as catalysts, this review will mainly focus on self-assembled oxide-based catalytic materials. The content includes: (1) Design and synthetic strategy toward self-assembled mesoporous catalysts; (2) Polyoxometalates (POMs) based nanocatalysts; (3) Dendrimers based nanocatalysts; (4) Shaped nanomaterials and catalytic applications. We show that self-assemblies of molecules, crystalline seeds, nano-building blocks into organized mesoscopic structures paved new roads for tailoring porosities of heterogeneous catalysts and catalytic active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Parquet approximation for the 4x4 Hubbard cluster

We present a numerical solution of the parquet approximation (PA), a conserving diagrammatic approach which is self-consistent at both the single-particle and the two-particle levels. The fully irreducible vertex is approximated by the bare interaction thus producing the simplest approximation that one can perform with the set of equations involved in the formalism. The method is applied to the Hubbard model on a half-filled 4x4 cluster. Results are compared to those obtained from Determinant Quantum Monte Carlo (DQMC), FLuctuation EXchange (FLEX), and self-consistent second-order approximation methods. This comparison shows a satisfactory agreement with DQMC and a significant improvement over the FLEX or the self-consistent second-order approximation.

36 MATERIALS SCIENCE↗

Novel Catalyst Support Materials for PEM Fuel Cells: Current Status and Future Prospects

The catalyst supports exhibit great influence on the cost, performance, and durability of polymer electrolyte membrane (PEM) fuel cells. This review paper is to summarize several important kinds of novel support materials for PEM fuel cells (including direct methanol fuel cell, DMFC): nanostructured carbon materials (carbon nanotubes/carbon nanofibers, mesoporous carbon), conductive doped diamonds and nanodiamonds, conductive oxides (tin oxide/indium tin oxide, titanium oxide, tungsten oxide) and carbides (tungsten carbides). The advantages and disadvantages, the acting mechanism to promote electrocatalysis, and the strategies to improve present catalyst support materials and to search for new ones are discussed. This is expected to throw light on future development of catalyst support for PEM fuel cells.

30 DIRECT ENERGY CONVERSION↗

Membrane proteomics of phagosomes suggests a connection to autophagy

Phagocytosis is the central process by which macrophage cellsinternalize and eliminate infectious microbes as well as apoptoticcells. During maturation, phagosomes containing engulfed particlesfuse with various endosomal compartments through theaction of regulatory molecules on the phagosomal membrane. Inthis study, we performed a proteomic analysis of the membranefraction from latex bead-containing (LBC) phagosomes isolatedfrom macrophages. The profile, which comprised 546 proteins,suggests diverse functions of the phagosome and potential connectionsto secretory processes, toll-like receptor signaling, andautophagy. Many identified proteins were not previously knownto reside in the phagosome. We characterized several proteins inLBC phagosomes that change in abundance on induction of autophagy,a process that has been previously implicated in the hostdefense against microbial pathogens. These observations suggestcrosstalk between autophagy and phagocytosis that may be relevantto the innate immune response of macrophages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biomolecular detection device

A device for detecting and measuring the concentration of biomolecules in solution, utilizing a conducting electrode in contact with a solution containing target biomolecules, with a film with controllable pore size distribution characteristics applied to at least one surface of the conducting electrode. The film is functionalized with probe molecules that chemically interact with the target biomolecules at the film surface, blocking indicator molecules present in solution from diffusing from the solution to the electrode, thereby changing the electrochemical response of the electrode.

47 OTHER INSTRUMENTATION↗

Dye-Doped Silica Nanoparticle Labels/Protein Microarray for Detection of Protein Biomarkers

Biomarkers serve as indicators of biological and pathological processes, or physiological and pharmacological responses to a drug treatment. Interleukin-6 (IL-6), a biomarker with its important biological and pathological functions, has been studied for decades. Conventional fluorescence immunoassay has been widely used for analysis of biomakers like IL-6. However, single fluorophore labeling shows its limitations of low intensity and poor stability. We report a dye-encapsulated silica nanoparticle as a label, with the advantages of high fluorescence intensity, photostability, and biocompatibility, in conjunction with microarray technology for sensitive immunoassay of IL-6 on a microarray format. The tris (2,2’-bipyridyl)ruthenium (II)chloride hexahydrate (Rubpy) dye incorporated into silica nanoparticles using a simple one-step microemulsion synthesis step. The nanoparticles are uniform in size with a diameter of 50 nm. The microarray fluorescent immunoassay approach based on dye-doped silica nanoparticle labels has high sensitivity for practical applications with a limit of detection for IL-6 down to 0.1 ng mL-1. The calibration curve is linear over the range from 0.1 ng mL-1 to 10 ng mL-1. Furthermore, results illustrated that the assay is highly specific for IL-6 in the presence of range of cytokines or proteins. The RuDS dye-labeled nanoparticles in connection with protein microarrays show the promise for clinical diagnosis of biomarkers.

59 BASIC BIOLOGICAL SCIENCES↗