Engineering Papers⌕ Search

Engineering topics

Liu, Jun

Publications and source records attributed to Liu, Jun.

At least 775 records · Page 43

Oxygen Electrocatalysts for Water Electrolyzers and Reversible Fuel Cells: Status and Perspective

Hydrogen production by electrochemical water electrolysis has received great attention as an alternative technology for energy conversion and storage. The oxygen electrode has a substantial effect on the performance and durability in water electrolyzers and reversible fuel cells because of its intrinsically slow kinetics for oxygen evolution/reduction and poor durability under harsh operating environments. To improve oxygen kinetics and durability of the electrode, extensive studies for highly active and stable oxygen electrocatalyst have been performed. However, due to the thermodynamic instability of transition metals in acidic media, noble metal compounds have been primarily utilized as electrocatalysts in water electrolyzers and reversible fuel cells. For water electrolyzer applications, single noble metal oxides such as ruthenium oxide and iridium oxide have been studied, and binary or ternary metal oxides have been developed to take synergestic effects of each component. On the other hand, a variety of bifunctional electrocatalysts with a combination of monofunctional electrocatalysts such as platinum for oxygen reduction and iridium oxide for oxygen evolution for reversible fuel cell applications have been mainly proposed. Practically, supported iridium oxide-on-platinum, its reverse type, and non-precious metal-supported platinum and iridium bifunctional electrocatalysts have been developed. Recent theoretical calculations and experimental studies in terms of water electrolysis and fuel cell technology suggest effective ways to cope with current major challenges of cost and durability of oxygen electrocatalysts for technical applications.

Oxygen Elecctrocatalyst↗

Atmospheric mercury deposition recorded in an ombrotrophic peat core from Xiaoxing'an Mountain, Northeast China

The historical mercury accumulation rates (Hg AR) resulting from atmospheric deposition to Xiaoxing'an Mountain were determined via analysis of {sup 210}Pb- and {sup 14}C-dated cores up to 5000 years old. Natural Hg AR background, pre-industrial Hg AR and maximum industrial Hg AR in Northeast China were 2.2 {+-}1.0 {mu}g/m{sup 2}/yr for 5100-4500 BP, 5.7 {mu}g/m{sup 2}/yr and 112.4 {mu}g/m{sup 2}/yr, respectively. We assumed that the increase in Hg deposition in the Xiaoxing'an mountain area during industrial time was mainly attributed to local anthropogenic emissions around this peat bog.

54 ENVIRONMENTAL SCIENCES↗

Crystallization and functionality of inorganic materials

In this article, we briefly summarized our recent work on the studies of crystallization and functionality of inorganic materials. On the basis of the chemical bonding theory of single crystal growth, we can quantitatively simulate Cu{sub 2}O crystallization processes in solution system. We also kinetically controlled Cu{sub 2}O crystallization process in the reduction solution route. Lithium ion battery and supercapacitor performances of some oxides such as Co{sub 3}O{sub 4} and MnO{sub 2} were shown to elucidate the important effect of crystallization on functionality of inorganic materials. This work encourages us to create novel functionalities through the study of crystallization of inorganic materials, which warrants more chances in the field of functional materials.

36 MATERIALS SCIENCE↗

Carbon dioxide-assisted fabrication of highly uniform submicron-sized colloidal carbon spheres via hydrothermal carbonization using soft drink

An eco-friendly and economical method for the formation of uniform-sized carbon spheres by hydrothermal dehydration/condensation of a commercial carbonated beverage at 200 oC is reported. CO2 dissolved in the beverage accelerates the dehydration kinetics of the dissolved sugar molecules leading to production of homogeneous carbon spheres having a diameter less than 850 nm. In the presence of CO2, the rough surface of these carbon spheres likely results from continuous Ostwald ripening of constituent microscopic carbon-containing spheres that are formed by subsequent polymerization of intermediate HMF molecules.

beverage↗

Functionalized Graphene Sheets as Molecular Templates for Controlled Nucleation and Self-Assembly of Metal Oxide-Graphene Nanocomposites

Graphene sheets have been extensively studied as a key functional component of graphene-based nanocomposites for electronics, energy, catalysis,and sensing applications. However, fundamental understanding of the interfacial binding and nucleation processes at graphene surfaces remains lacking, and the range of controlled structures that can be produced are limited. Here, by using a combination of theoretical and experimental approaches, we demonstrate that functionalized graphene sheets (FGS) can function as a new class of molecular templates to direct nucleation and self-assembly and produce novel, three-dimensional nanocomposite materials. Two key aspects are demonstrated: First, the functional groups on FGS surface determine the nucleation energy, and thus control the nucleation sites and nucleation density, as well as the preferred crystalline phases. Second, FGS can function as a template to direct the self-assembly of surfactant micelles and produce ordered, mesoporous arrays of crystalline metal oxides and composites.

Environmental Molecular Sciences Laboratory↗

Conflicting Roles Of Nickel In Controlling Cathode Performance In Lithium-ion Batteries

A variety of approaches are being made to enhance the performance of lithium ion batteries. Incorporating multi-valence transition metal ions into metal oxide cathodes has been identified as an essential approach to achieve the necessary high voltage and high capacity. However, the fundamental mechanism that limits their power rate and cycling stability remains unclear. The power rate strongly depends on the lithium ion drift speed in the cathode. Crystallographically, these transition metal-based cathodes frequently have a layered structure. In the classic wisdom, it is accepted that lithium ion travels swiftly within the layers moving out/in of the cathode during the charge/discharge. Here, we report the unexpected discovery of a thermodynamically driven, yet kinetically controlled, surface modification in the widely explored lithium nickel manganese oxide cathode material, which may inhibit the battery charge/discharge rate. We found that during cathode synthesis and processing before electrochemical cycling in the cell nickel can preferentially move along the fast diffusion channels and selectively segregate at the surface facets terminated with a mix of anions and cations. This segregation essentially blocks the otherwise fast out/in pathways for lithium ions during the charge/discharge. Therefore, it appears that the transition metal dopant may help to provide high capacity and/or high voltage, but can be located in a “wrong” location that blocks or slows lithium diffusion, limiting battery performance. In this circumstance, limitations in the properties of Li-ion batteries using these cathode materials can be determined more by the materials synthesis issues than by the operation within the battery itself.

Environmental Molecular Sciences Laboratory↗

Nanocomposite of graphene and metal oxide materials

Nanocomposite materials comprising a metal oxide bonded to at least one graphene material. The nanocomposite materials exhibit a specific capacity of at least twice that of the metal oxide material without the graphene at a charge/discharge rate greater than about 10C.

36 MATERIALS SCIENCE↗

Phototoxicity of nano titanium dioxides in HaCaT keratinocytes—Generation of reactive oxygen species and cell damage

Nano-sized titanium dioxide (TiO{sub 2}) is among the top five widely used nanomaterials for various applications. In this study, we determine the phototoxicity of TiO{sub 2} nanoparticles (nano-TiO{sub 2}) with different molecular sizes and crystal forms (anatase and rutile) in human skin keratinocytes under UVA irradiation. Our results show that all nano-TiO{sub 2} particles caused phototoxicity, as determined by the MTS assay and by cell membrane damage measured by the lactate dehydrogenase (LDH) assay, both of which were UVA dose- and nano-TiO{sub 2} dose-dependent. The smaller the particle size of the nano-TiO{sub 2} the higher the cell damage. The rutile form of nano-TiO{sub 2} showed less phototoxicity than anatase nano-TiO{sub 2}. The level of photocytotoxicity and cell membrane damage is mainly dependent on the level of reactive oxygen species (ROS) production. Using polyunsaturated lipids in plasma membranes and human serum albumin as model targets, and employing electron spin resonance (ESR) oximetry and immuno-spin trapping as unique probing methods, we demonstrated that UVA irradiation of nano-TiO{sub 2} can induce significant cell damage, mediated by lipid and protein peroxidation. These overall results suggest that nano-TiO{sub 2} is phototoxic to human skin keratinocytes, and that this phototoxicity is mediated by ROS generated during UVA irradiation. Highlights: ► We evaluate the phototoxicity of nano-TiO{sub 2} with different sizes and crystal forms. ► The smaller the particle size of the nano-TiO{sub 2} the higher the cell damage. ► The rutile form of nano-TiO{sub 2} showed less phototoxicity than anatase nano-TiO{sub 2}. ► ESR oximetry and immuno-spin trapping techniques confirm UVA-induced cell damage. ► Phototoxicity is mediated by ROS generated during UVA irradiation of nano-TiO{sub 2}.

60 APPLIED LIFE SCIENCES↗

Conductive Rigid Skeleton Supported Silicon as High-Performance Li-Ion Battery Anodes

A cost effective and scalable method is developed to prepare a core-shell structured Si/B 4 C composite with graphite coating with high efficiency, exceptional rate performance and long-term stability. In this material, conductive B 4 C with high Mohs hardness serves not only as micro-/nano- millers in the ball-milling process to break down micron-sized Si but also as the conductive rigid skeleton to support the in-situ formed sub-10 nm Si particles to alleviate the volume expansion during charge/discharge. The Si/B 4 C composite is coated with a few graphitic layers to further improve the conductivity and stability of the composite. The Si/B4C/graphite (SBG) composite anode shows excellent cyclability with a specific capacity of ~822 mAh∙g -1 (based on the weight of the entire electrode, including binder and conductive carbon) and ~94% capacity retention over 100 cycles at 0.8C rate. This new structure has the potential to provide adequate storage capacity and stability for practical applications, and good opportunity for large scale manufacturing using commercially available materials and technologies.

25 ENERGY STORAGE↗

Kinetic Monte Carlo Study of Ambipolar Lithium Ion and Electron–Polaron Diffusion into Nanostructured TiO2

Nanostructured titania (TiO2) polymorphs have proved to be promising electrode materials for next generation lithium-ion batteries. However, there is still a lack of understanding of the fundamental microscopic processes that control charge transport in these materials. Here we present microscopic simulations of the collective dynamics of lithium-ion (Li+) and charge compensating electron polarons (e-) in rutile TiO2 nanoparticles in contact with idealized conductive matrix and electrolyte. Kinetic Monte Carlo simulations are used, parameterized by molecular dynamics-based predictions of activation energy barriers for Li+ and e- diffusion. Simulations reveal the central role of electrostatic coupling between Li+ and e- on their collective drift diffusion at the nanoscale. They also demonstrate that high contact area between conductive matrix and rutile nanoparticles leads to undesirable coupling-induced surface saturation effects during Li+ insertion, which limits the overall capacity and conductivity of the material. These results help provide guidelines for design of nanostructured electrode materials with improved electrochemical performance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In situ Regeneration of NADH via Lipoamide Dehydrogenase-catalyzed Electron Transfer Reaction Evidenced by Spectroelectrochemistry

NAD/NADH is a coenzyme found in all living cells, carrying electrons from one reaction to another. We report on characterizations of in situ regeneration of NADH via lipoamide dehydrogenase (LD)-catalyzed electron transfer reaction to regenerate NADH using UV-vis spectroelectrochemistry. The Michaelis-Menten constant (Km) and maximum velocity (Vmax) of NADH regeneration were measured as 0.80 {+-} 0.15 mM and 1.91 {+-} 0.09 {micro}M s-1 in a 1-mm thin-layer spectroelectrochemical cell using gold gauze as the working electrode at the applied potential -0.75 V (vs. Ag/AgCl). The electrocatalytic reduction of the NAD system was further coupled with the enzymatic conversion of pyruvate to lactate by lactate dehydrogenase to examine the coenzymatic activity of the regenerated NADH. Although the reproducible electrocatalytic reduction of NAD into NADH is known to be difficult compared to the electrocatalytic oxidation of NADH, our spectroelectrochemical results indicate that the in situ regeneration of NADH via LD-catalyzed electron transfer reaction is fast and sustainable and can be potentially applied to many NAD/NADH-dependent enzyme systems.

59 BASIC BIOLOGICAL SCIENCES↗

Fluorescent Functionalized Mesoporous Silica for Radioactive Material Extraction

Mesoporous silica with covalently bound salicylic acid molecules incorporated in the structure was synthesized with a one-pot, co-condensation reaction at room temperature. The as-synthesized material has a large surface area, uniform particle size, and an ordered pore structure as determined by characterization with transmission electron microscopy, thermal gravimetric analysis, and infrared spectra, etc. Using the strong fluorescence and metal coordination capability of salicylic acid, functionalized mesoporous silica (FMS) was developed to track and extract radionuclide contaminants, such as uranyl [U(VI)] ions encountered in subsurface environments. Adsorption measurements showed a strong affinity of the FMS toward U(VI) with a Kd value of 105 mL/g, which is four orders of magnitude higher than the adsorption of U(VI) onto most of the sediments in natural environments. The new materials have a potential for synergistic environmental monitoring and remediation of the radionuclide U(VI) from contaminated subsurface environments.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications

Hollow Carbon Nanowires (HCNWs) were prepared through pyrolyzation of hollow polyaniline nanowires precursor. The HCNWs used as anode material for Na-ion batteries delivers a high reversible capacity of 251 mAh g{sup -1} and 82.2% capacity retention over 400 charge/discharge cycles between 1.2 and 0.01 V (vs. Na{sup +}/Na) at a constant current of 50 mA g{sup -1} (0.2 C). Excellent cycling stability is also observed at even higher charge-discharge rate. A high reversible capacity of 149 mAh g{sup -1} also can be obtained at a current rate of 500 mA g{sup -1} (2C). The good Na ion insertion property is attributed to the short diffusion distance in the HCNWs, and the large interlayer distance (0.37 nm) between the graphitic sheets, which agrees with the interlayered distance predicted by theoretical calculation to enable Na ion insertion in carbon materials.

74 ATOMIC AND MOLECULAR PHYSICS↗

Silicon Based Anodes for Li-Ion Batteries

Silicon is environmentally benign and ubiquitous. Because of its high specific capacity, it is considered one of the most promising candidates to replace the conventional graphite negative electrode used in today's Li ion batteries. Silicon has a theoretical specific capacity of nearly 4200 mAh/g (Li21Si5), which is 10 times larger than the specific capacity of graphite (LiC6, 372 mAh/g). However, the high capacity of silicon is associated with huge volume changes (more than 300 percent) when alloyed with lithium, which can cause severe cracking and pulverization of the electrode and lead to significant capacity loss. Significant scientific research has been conducted to circumvent the deterioration of silicon based anode materials during cycling. Various strategies, such as reduction of particle size, generation of active/inactive composites, fabrication of silicon based thin films, use of alternative binders, and the synthesis of 1-D silicon nanostructures have been implemented by a number of research groups. Fundamental mechanistic research has also been performed to better understand the electrochemical lithiation and delithiation process during cycling in terms of crystal structure, phase transitions, morphological changes, and reaction kinetics. Although efforts to date have not attained a commercially viable Si anode, further development is expected to produce anodes with three to five times the capacity of graphite. In this chapter, an overview of research on silicon based anodes used for lithium-ion battery applications will be presented. The overview covers electrochemical alloying of the silicon with lithium, mechanisms responsible for capacity fade, and methodologies adapted to overcome capacity degradation observed during cycling. The recent development of silicon nanowires and nanoparticles with significantly improved electrochemical performance will also be discussed relative to the mechanistic understanding. Finally, future directions on the development of silicon based anodes will be considered.

25 ENERGY STORAGE↗

Hollow Core-Shell Structured Porous Si-C Nanocomposites for Li-Ion Battery Anodes

Hollow core-shell structured porous Si-C nanocomposites with void space up to tens of nanometers are designed to accommodate the volume expansion during lithiation for high-performance Li-ion battery anodes. An initial capacity of {approx}760 mAh/g after formation cycles (based on the entire electrode weight) with {approx}86% capacity retention over 100 cycles is achieved at a current density of 1 A/g. Good rate performance is also demonstrated.

36 MATERIALS SCIENCE↗

Selective Metal Cation Capture by Soft Anionic Metal-Organic Frameworks via Drastic Single-Crystal-to-Single-Crystal Transformations

Flexible anionic metal-organic frameworks transform to neutral heterobimetallic systems via single-crystal-to-single-crystal processes invoked by cation insertion. These transformations are directed by cooperative bond breakage and formation, resulting in expansion or contraction of the 3D framework by up to 33% due to the flexible nature of the organic linker. These MOFs displays highly selective uptake of divalent transition metal cations (Co2+ and Ni2+ for example) over alkali metal cations (Li+ and Na+).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Delivery of cationic polymer-siRNA nanoparticles for gene therapies in neural regeneration

Highlights: Black-Right-Pointing-Pointer Nogo receptor can inhibit growth of injured axons, thus affecting neural regeneration. Black-Right-Pointing-Pointer The delivery of siRNA is crucial to inhibit NgR expression in NSCs. Black-Right-Pointing-Pointer Non-viral vector PEG-PEI condensed siRNA targeting NgR into nanoscale particles. Black-Right-Pointing-Pointer PEG-PEI/siRNA at N/P = 15 displayed high transfection efficiency and low cytotoxicity. Black-Right-Pointing-Pointer PEG-PEI has great potential in carrying siRNA to diminish the gene expression in NSCs. -- Abstract: The therapeutic applications of neural stem cells (NSCs) have potential to promote recovery in many obstinate diseases in central nervous system. Regulation of certain gene expressions using siRNA may have significant influence on the fate of NSC. To achieve the optimum gene silencing effect of siRNA, non-viral vector polyethylene glycol-polyethyleneimine (PEG-PEI) was investigated in the delivery of siRNA to NSCs. The characteristics of PEG-PEI/siRNA polyplexes were detected by scanning electron microscopy (SEM). The effects of nanoparticles on cell viability were measured via CCK-8 assay. In addition, the transfection efficiency was evaluated by fluorescence microscope and flow cytometry, and real-time PCR and Western Blot were employed to detect the gene inhibition effect of siRNA delivered by PEG-PEI. The SEM micrographs showed that PEG-PEI could condense siRNA to form diffuse and spherical nanoparticles. The cytotoxicity of PEG-PEI/siRNA nanocomplexes (N/P = 15) was significantly lower when compared with that of Lipofectamine 2000/siRNA (P < 0.05). Moreover, the highest transfection efficiency of PEG-PEI/siRNA nanoparticles was obtained at an N/P ratio of 15, which was better than that achieved in the transfection using Lipofectamine 2000 (P < 0.05). Finally, the gene knockdown effect of PEG-PEI/siRNA nanoparticles was verified at the levels of mRNA and protein. These results suggest that PEG-PEI may potentially be used as a siRNA delivery vector for neural regeneration therapy.

60 APPLIED LIFE SCIENCES↗