Engineering Papers⌕ Search

Engineering topics

Liu, Jun

Publications and source records attributed to Liu, Jun.

At least 505 records · Page 28

Microstructure Study on Initial Lithiation/Delithiation Cycle of Crystalline Silicon Wafer

In this work, we found that Si wafer has a preferential expansion along <110> directions during the initial lithiation/delithiation cycle, as the evidence of wider <110> cracks. These cracks also propagate much deep, at least 5 um. The morphology of the amorphous Si layer appearing after the initial cycle shows a dependence on the plane orientation, i.e., multi and deep layers on the {110} plane, where as a single layer with ~200nm on the {100} plane.A PAA coating layer on the Si wafer mitigates the cracks and reduces the thickness of the amorphous Si layer.

14 SOLAR ENERGY↗

Efficient and thermally stable organic solar cells based on small molecule donor and polymer acceptor

Efficient organic solar cells (OSCs) often use combination of polymer donor and small molecule acceptor. Herein we demonstrate efficient and thermally stable OSCs with combination of small molecule donor and polymer acceptor, which is expected to expand the research field of OSCs. Typical small molecule donors show strong intermolecular interactions and high crystallinity, and consequently do not match polymer acceptors because of large-size phase separation. We develop a small molecule donor with suppressed π-π stacking between molecular backbones by introducing large steric hindrance. As the result, the OSC exhibits small-size phase separation in the active layer and shows a power conversion efficiency of 8.0%. Moreover, this OSC exhibits much improved thermal stability, i.e. maintaining 89% of its initial efficiency after thermal annealing the active layer at 180 °C for 7 days. These results indicate a different kind of efficient and stable OSCs.

Science & Technology - Other Topics↗

Joint charge storage for high-rate aqueous zinc-manganese dioxide batteries

Aqueous rechargeable zinc-manganese dioxide batteries have great promise for large-scale energy storage due to the use of environmental friendly, abundant, and rechargeable Zn metal anode and MnO2 cathode. In the literature various intercalation and conversion reaction mechanisms have been reported depending on the origin of the starting materials, but it is not clear how these mechanisms can be simultaneously manipulated to improve the charge storage and transport properties. Here, we report a systematical study to understand the electrolyte controlled charge-storage mechanisms in layered d-MnO2. A joint Zn2+ intercalation pseudocapacitance in bulky d-MnO2 and H+ conversion reaction pathway in a wide C-rate charge-discharge range facilitates the high rate performance of high capacity d-MnO2 cathodes. The Zn-d-MnO2 system delivers discharge capacity of 136.9 mAh g-1 at 20 C and capacity retention of 92% over 4,000 cycles with joint charge storage mechanisms.

Jin, Yan↗

Enabling High-Voltage Lithium-Metal Batteries under Practical Conditions

Rechargeable lithium (Li) metal batteries (LMBs) offer a great opportunity for applications needing high-energy-density battery systems. However, rare progress has been demonstrated so far under practical conditions including high voltage, high loading cathode, thin Li anode, and lean electrolyte. Here, in opposite to the common wisdom, we report an ether-based localized high concentration electrolyte that can greatly enhance the stability of Ni-rich LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode under 4.4 V and 4.5 V with an effective protection interphase enriched in LiF. This effect, in combination with the superior Li stability in this electrolyte, enables dramatically improved cycling performances of Li||NMC811 batteries under highly challenging conditions. The LMBs can retain over 80% capacity in 150 stable cycles with extremely limited amounts of Li anode and electrolyte. The findings in this work point out a very promising strategy to develop practical high-energy LMBs.

Ren, Xiaodi↗

Characterization and modeling of reverse-bias breakdown in Cu(In,Ga)Se 2 photovoltaic devices

Partial shading of series-connected thin-film photovoltaic modules can force shaded cells into reverse bias, which can cause rapid and irreversible power loss and reduce the practical module lifespan. Unfortunately, this is a common occurrence in field-deployed modules due to the myriad of environmental factors that can result in partial shading. In this work, we identify as-grown nonuniformities in the Cu(In,Ga)Se 2 (CIGS) absorber layers as the points of origin for the damage induced under reverse-bias conditions. The structure and chemistry associated with inclusions and voids in the CIGS films cause these features to act as resistive heating elements in reverse-bias conditions. This localized resistive heating provides the energy required to induce thermal runaway breakdown in the CIGS devices, resulting in damage to charge collection and reduced active area of a device. This mechanism is also described with a robust device model to connect the experimental observations with their physical origins.

14 SOLAR ENERGY↗

High-energy lithium metal pouch cells with limited anode swelling and long stable cycles

Li metal anode has attracted wide attentions for high-energy cells, but there have been few reports of long term cycling and the degradation mechanism of realistic high-energy Li metal batteries (LMBs). A key issue inherent to high-energy LMBs is cell swelling due to continuous side reactions between Li and electrolyte. Herein, a prototypical 300 Wh kg-1 (1.0 Ah) pouch cell is developed by combining Li metal anode and LiNi0.6Mn0.2Co0.2O2 cathode. In a conventional carbonate electrolyte, the cell can only last 12 cycles because of the depletion of Li and electrolyte accompanied by a serious cell swelling of more than 110% thickening. Through the integration of a new compatible electrolyte and a uniform external pressure, over 200 stable cycles with 86% capacity retention and 83% energy retention have been demonstrated. Using this 300 Wh kg-1 pouch cell as a platform, two continuous but different Li anode structural evolution processes are revealed: (1) in the initial 50 cycles, flat Li foil converts into large Li particles entangled within the solid electrolyte interphase (SEI) layer, leading to a fast anode volume expansion and cell thickening. (2) As cycling continued, the external pressure maintains good contact between Li particles to ensure a percolation pathway for both ions and electrons thus the electrochemical reactions continue to occur through the entire anode. The individual solid Li particles evolve into a porous structure buffering the further anode volume expansion. Accordingly, Li anode thickening is significantly reduced with only 19% cell swelling in subsequent 150 cycles.

Niu, Chaojiang↗

High efficiency perovskite quantum dot solar cells with charge separating heterostructure

Abstract Metal halide perovskite semiconductors possess outstanding characteristics for optoelectronic applications including but not limited to photovoltaics. Low-dimensional and nanostructured motifs impart added functionality which can be exploited further. Moreover, wider cation composition tunability and tunable surface ligand properties of colloidal quantum dot (QD) perovskites now enable unprecedented device architectures which differ from thin-film perovskites fabricated from solvated molecular precursors. Here, using layer-by-layer deposition of perovskite QDs, we demonstrate solar cells with abrupt compositional changes throughout the perovskite film. We utilize this ability to abruptly control composition to create an internal heterojunction that facilitates charge separation at the internal interface leading to improved photocarrier harvesting. We show how the photovoltaic performance depends upon the heterojunction position, as well as the composition of each component, and we describe an architecture that greatly improves the performance of perovskite QD photovoltaics.

14 SOLAR ENERGY↗

In-situ Microscopy Characterization of Cu(In,Ga)Se2 Potential-Induced Degradation: Preprint

We report on the role of sodium in potential-induced degradation (PWe report on the role of sodium in potential-induced degradation (PID) of Cu(In, Ga)Se2 (CIGS) solar cells. In-situ microscopy characterizations on AFM platform were performed on two stressed CIGS device under room temperature (RT) and high temperature (HT) at 85 degrees C. During PID stressing we observed depletion region gets wider as Na migrates, p-n junction becomes leaky at RT for over a month; and similar junction evolution was observed for HT-stressed sample, eventually the junction collapsed after 18 hours. The diode behaviors were confirmed by dark I-V measurement. Time-of-Flight secondary-ion mass spectrometry reveals that the Na accumulates on ZnO and CdS side, as well as the upper layer of CIGS layer. The results indicate that Na drifted by the voltage applied on the soda-lime glass, then diffuse through the whole device. And the sodium profiles have different points of evolution due to the temperature differences between the two stressed samples. The consistent results unambiguously show how Na from substrate glass causes PID in CIGS solar cells.ID) of Cu(In, Ga)Se2 (CIGS) solar cells. In-situ microscopy characterizations on AFM platform were performed on two stressed CIGS device under room temperature (RT) and high temperature (HT) at 85 degrees C. During PID stressing we observed depletion region gets wider as Na migrates, p-n junction becomes leaky at RT for over a month; and similar junction evolution was observed for HT-stressed sample, eventually the junction collapsed after 18 hours. The diode behaviors were confirmed by dark I-V measurement. Time-of-Flight secondary-ion mass spectrometry reveals that the Na accumulates on ZnO and CdS side, as well as the upper layer of CIGS layer. The results indicate that Na drifted by the voltage applied on the soda-lime glass, then diffuse through the whole device. And the sodium profiles have different points of evolution due to the temperature differences between the two stressed samples. The consistent results unambiguously show how Na from substrate glass causes PID in CIGS solar cells.

14 SOLAR ENERGY↗

Protection of GaInP 2 Photocathodes by Direct Photoelectrodeposition of MoS x Thin Films

Catalytic MoS x thin films have been directly photoelectrodeposited on GaInP 2 photocathodes for stable photoelectrochemical hydrogen generation. Specifically, the MoSx deposition conditions were controlled to obtain 8-10 nm films directly on p-GaInP 2 substrates without ancillary protective layers. The films were nominally composed of MoS 2 , with additional MoO x S y and MoO 3 species detected and showed no long-range crystalline order. The as-deposited material showed excellent catalytic activity toward the hydrogen evolution reaction relative to bare p-GaInP 2 . Notably, no appreciable photocurrent reduction was incurred by the addition of the photoelectrodeposited MoSx catalyst to the GaInP 2 photocathode under light-limited operating conditions, highlighting the advantageous optical properties of the film. The MoS x catalyst also imparted enhanced durability toward photoelectrochemical hydrogen evolution in acidic conditions, maintaining nearly 85% of the initial photocurrent after 50 h of electrolysis. In total, this work demonstrates a simple method for producing dual-function catalyst/protective layers directly on high-performance, planar III-V photoelectrodes for photoelectrochemical energy conversion.

14 SOLAR ENERGY↗

Self-Smoothing Anode for Achieving High-Energy Lithium Metal Batteries under Realistic Conditions

Solving the lithium (Li) metal problem is one of the most significant challenges for future high energy batteries. Despite significant efforts to stabilize Li-metal anode structures and prevent dendrite formation, achieving long cycling life in high energy cells remains extremely difficult due to a combination of complex failure modes involving accelerated anode degradation, and depletion of the electrolyte and the Li metal. Here, we report a stable and self-smoothing Li anode structure based on amine-functionalized three-dimensional (3D) carbon fibers for long-cycling life full cells under conditions required for high energy, rechargeable Li-metal batteries. Reversible and smooth Li deposition and stripping is realized on the new anode structure, in contrast with the porous and dendritic Li layers that develop on a pure Li-metal surface. The stable, self-smoothing anode coupled with high-capacity LiNi0.8Mn0.1Co0.1O2 delivers stable cycling using parameters for a high energy cell with a specific energy of more than 380 Wh kg-1, counting all active and inactive components in a single cell, in particular with a high cathode loading, thin Li metal and lean electrolyte. The cycling life of the cell is increased by more than an order of magnitude compared to the cell using a flat Li-metal anode.

Niu, Chaojiang↗

Optimization of Medium Frequency Transformers with Practical Considerations

A method to design and optimize a Medium Frequency Transformer (MFT) based on commercially available components and semiconductor and converter constraints is presented. The optimization algorithm is used to redesign the transformer for a scaled-down electric vehicle (EV) fast charger using a three-level resonant circuit topology. The main consideration of this paper is the uncertainty caused by modeling assumptions in optimization algorithms. To reduce this uncertainty, space mapping is used to create an optimized design point. Lastly, a comparison of the designs found using the original optimization algorithm and the space mapping technique are compared and analyzed. For simplicity, only a single objective optimization routine is employed.

42 ENGINEERING↗

Pseudocapacitive Storage in Nanolayered Ti 2 NT x MXene Using Mg-Ion Electrolyte

Electrochemical supercapacitors are hybrids of a capacitor and battery that rely on materials capable of storing charges via pseudocapacitive reactions in addition to conventional electrostatic double-layer charge storage. MXenes, a relatively new class of two-dimensional (2D) transition metal carbides and nitrides, are ideal candidates for supercapacitors due to their high electronic conductivity, high surface area, and ability to store charges via pseudocapacitive mechanisms. Nitride MXenes such as Ti 2 NT x are predicted to have higher pseudocapacitance than carbide MXenes but have not been explored experimentally. Here, we report on the synthesis, characterization, and pseudocapacitive charge storage mechanism in the Ti 2 NT x nitride MXene. Successful formation of nanolayered Ti 2 NT x MXene is characterized by XRD, SEM, and N 2 physisorption analyses. The identity of the surface terminating groups T x are assigned to primarily O and/or OH based on Raman, FTIR, and STEM-EELS. When tested in various electrolytes, the nanolayered Ti 2 NT x MXene exhibits pronounced reversible redox peaks and high areal capacitances (~1350 uF cm -2 in 1 M MgSO 4 aqueous electrolyte) well exceeding that expected from a double-layer charge storage (~50 uF cm -2 ) showing that charge is stored in the Ti 2 NT x MXene via a pseudocapacitive mechanism. We report a trend in the capacitance as a function of cation as follows: Mg 2+ > Al 3+ > H + > Li + > Na + > K + , that matches theoretical predictions. Remarkably, nanolayered Ti 2 NT x MXene exhibits >200 F g -1 capacitance over a 1.0 V range in the Mg-ion electrolyte, and the capacitance increases to 160% of its initial value after 1000 cycles owing to the 2 e - process and the distinctive multilayer adsorption characteristic of the Mg 2+ cation on the Ti 2 NT x MXene. Furthermore, these findings identify Ti 2 NT x MXene as a new pseudocapacitive material that possesses high capacitance and wide working voltage in a safe and environmentally friendly Mg-ion electrolyte.

2D MXene↗

Spatial Molecular Layer Deposition of Ultrathin Polyamide To Stabilize Silicon Anodes in Lithium-Ion Batteries

Cycling stability is central to implementing silicon (Si) anodes in next-generation high-energy lithium-ion batteries. However, challenges remain due to the lack of effective strategies to enhance the structural integrity of the anode during electrochemical cycling. Here, we develop a nanoscale polyamide coating, using spatial molecular layer deposition (MLD) of m-phenylenediamine and trimesoyl chloride precursors, to preserve the structural integrity of Si anodes. Poly(acrylic acid) (PAA) has been widely used in Si-based anodes as a binding agent due to its effective binding interactions with Si particles. However, the structural integrity of the anode is compromised by thermochemical decomposition of the poly(acrylic acid) binder, which can occur during electrode drying or during electrochemical cycling. Decomposition causes a 62% decrease in the elastic modulus of the Si anode, as measured by nanoindentation in electrolyte-soaked conditions. This study shows that an ultrathin polyamide coating counteracts this structural degradation, increases the elastic modulus of the degraded anode by 345%, and improves cohesion. Electrochemical analysis of polyamide-coated anodes reveals a film thickness dependence in cycling behavior. High overpotentials and fast capacity fading are observed for Si anodes with a 15 nm coating, whereas Si anodes with a 0.5 nm coating demonstrate stable cycling over 150 cycles with a capacity >1400 mAh g-1. Our findings identify polyamide as an effective electrode coating material to enhance structural integrity, leading to excellent cyclability with higher capacity retention. Furthermore, the use of the spatial MLD approach to deposit the coating enables short deposition time and a facile route to scale-up.

25 ENERGY STORAGE↗

Superionic Conduction and Interfacial Properties of the Low Temperature Phase Li7P2S8Br0.5I0.5

Sulfide-based solid electrolytes are pursued for their application in bulk-type all-solid-state lithium batteries. Although the usefulness of Li10GeP2S12-type materials have been demonstrated in all-solid-state cathodes, a suitable material with both high ionic conductivity and good interfacial properties with common anode materials is still lacking. In this work, we explore the phase and transport properties of mechanically-milled Li7P2S8Br0.5I0.5, with emphasis on the favorable kinetics at Li metal anode. The low temperature crystalline phase Li7P2S8Br0.5I0.5 (LT-LPSBI) has exceptionally high ionic conductivity of 4.7 mS/cm at room temperature. Moreover, the LT-LPSBI supports long-term Li cycling at 0.5 mA cm-2 with low and stable interfacial resistance (5 O cm2). Transport phenomenon of Li/LT-LPSBI interface and cycling behavior of Li symmetric cells are studied and discussed in detail.

Wang, Yuxing↗

Roles of kink on the thermal transport in single polyethylene chains

The trans-gauche state transformation commonly exists in polymers. However, the fundamental understanding of the roles of kink (gauche state) on the thermal energy transport in polymer chains is rather limited. From atomic simulations, we show that kinks greatly scatter phonons in single polyethylene chains, and even a single kink can reflect more than half of the phonons. Further studies show that kinks not only add extra thermal resistance to the chain but also break the whole chain into small segments and each with reduced thermal conductivity. Finally, a simple series thermal resistance model is proposed to estimate the effective thermal conductivity of single polymer chains with multiple kinks.

42 ENGINEERING↗

Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries

Lithium ion and lithium metal batteries have received tremendous interest in the last decade for a wide range of energy storage applications. Although great progress has been made in developing new electrode materials and concepts, it is difficult to rapidly incorporate these advances in battery technologies. A key challenge is the knowledge gap between the fundamental materials research and the cell-level understanding of the relationship between high energy and stable cycling. As a result, the literature reports are based on a wide range of experimental conditions that cannot be easily realized in realistic cells. Taking lithium metal batteries as an example, this paper briefly discusses the fundamental mechanisms that lead to the inconsistent observations in battery research. We then propose development of a standard testing protocol based on the requirements of high-energy lithium metal cells. The importance of building a standard testing protocol is emphasized to accelerate the discovery of solutions for real challenges as well as inspire innovations that are readily adaptable to real batteries.

Chen, Shuru↗

High-Concentration Ether Electrolytes for Stable High-Voltage Lithium Metal Batteries

High-voltage (>4.0 V) rechargeable lithium (Li) metal batteries face huge obstacles due to the high reactivity of Li metal with traditional organic carbonate electrolytes. It is generally accepted that ether-based electrolytes are unstable above 4.0 V and thus unsuitable for high voltage applications, despite of their good compatibility with Li metal. Here we report a concentrated ether electrolyte that could be used under high voltage up to 4.5 V with the formation of a unique cathode/electrolyte interphase enriched in LiF, which effectively preserves the cathode crystalline structural integrity. Employing this high concentration ether electrolyte, Li metal batteries with a moderately high cathode loading of 1.5 mAh cm-2 can have a capacity retention of 92% after 500 cycles at 4.3 V and demonstrate nearly 100% cycling efficiency even at 4.5 V.

Ether, electrolyte, high voltage, stability, lithi↗

Emergence of topologically protected states in the MoTe 2 Weyl semimetal with layer-stacking order

Electronic tunability in crystals with weakly bound layers can be achieved through layer stacking order. One such example is MoTe 2 , where the low-temperature orthorhombic T d phase is topological and host to Weyl quasiparticles. The transition mechanism to the nontrivial topology is elucidated by single-crystal neutron diffraction. Upon cooling from the monoclinic 1 T' to the T d phase, diffuse scattering accompanies the transition, arising from random, in-plane layer displacements, and dissipates upon entering the T d phase. Here, diffuse scattering is observed only in the H0L plane due to irreversible layer shifts along the c axis that break the centrosymmetry of the monoclinic lattice.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗