Engineering Papers⌕ Search

Engineering topics

Liu, Jun

Publications and source records attributed to Liu, Jun.

At least 451 records · Page 25

Role of the Solvent–Surfactant Duality of Ionic Liquids in Directing Two-Dimensional Particle Assembly

Nanoparticle self-assembly plays a key role in formation of superlattices, which exhibit remarkable physical and chemical properties. However, controlling assembly remains a challenge partly due to a lack of understanding of the assembly dynamics and the difficulty in linking interfacial solution properties to interparticle forces. In this study, using liquid-cell transmission electron microscopy, self-assembly of gold nanoparticles (NPs) into superlattices in mixtures of water and ionic liquid (IL) was visualized, revealing a dual role of the IL in the assembly process. At intermediate concentrations, the IL acts as a surfactant stabilizing the particles at a well-defined equilibrium separation corresponding to the length of hydrogen bonded IL cations adsorbed onto neighboring NPs. Analysis of the interparticle forces reveals attractive long-range interactions of a van der Waals nature. At separations of 1-3 nm, interactions are dominated by attractive ion correlation and repulsive hydration forces giving rise to an energy minimum at 1.5 nm separation. The superlattice is further stabilized by hydrogen bonding, which shifts the equilibrium interparticle distance to 1.1 nm. In contrast, at higher concentrations, IL accumulates and forms a structured network in the gap between nanoparticles, where it acts as a solvent that eliminates the repulsive barrier and thus promotes particle coalescence. This solvent-surfactant duality of IL opens new opportunities for their use in directing particle assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size Effects in the Thermal Conductivity of Amorphous Polymers

Manipulating thermal conductivity through nanoengineering is of critical importance to advance technologies, such as soft robotics, artificial skin, wearable electronics, batteries, thermal insulation, and thermoelectrics. Here, by examining amorphous polymers, including polystyrene, polypropylene, polyethylene, and ethylene vinyl alcohol, using molecular dynamics simulations, we find that the thermal conductivities of amorphous polymers can be reduced below their amorphous limit by size effects. Size-dependent thermal transport in amorphous materials is decomposed into crystalline, crystalline-to-amorphous, and amorphous regimes. In the amorphous regime, the mean free path of propagating heat carriers can range from tens of nanometers to more than 100 nm, contributing 16%–36% of the total thermal conductivity. A two-channel model that combines no size effect (i.e., difusons and locons) and size effect (i.e., propagons) is proposed to account for size-dependent thermal conductivity. We also find that the presence of charged molecules in polymers can significantly affect the thermal conductivity and its size effects due to electrostatic interactions. Overall, this work provides insights into the thermal conductivity of amorphous polymers that will have a broad impact on the nano- and chemical engineering of polymers for various energy-related applications.

36 MATERIALS SCIENCE↗

Gravitational Test beyond the First Post-Newtonian Order with the Shadow of the M87 Black Hole

In this study, the 2017 Event Horizon Telescope (EHT) observations of the central source in M87 have led to the first measurement of the size of a black-hole shadow. This observation offers a new and clean gravitational test of the black-hole metric in the strong-field regime. We show analytically that spacetimes that deviate from the Kerr metric but satisfy weak-field tests can lead to large deviations in the predicted black-hole shadows that are inconsistent with even the current EHT measurements. We use numerical calculations of regular, parametric, non-Kerr metrics to identify the common characteristic among these different parametrizations that control the predicted shadow size. We show that the shadow-size measurements place significant constraints on deviation parameters that control the second post-Newtonian and higher orders of each metric and are, therefore, inaccessible to weak-field tests. The new constraints are complementary to those imposed by observations of gravitational waves from stellar-mass sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Stabilizing Zinc Anode Reactions by Polyethylene Oxide Polymer in Mild Aqueous Electrolytes

Abstract Zn dendrites growth and poor cycling stability are significant challenges for rechargeable aqueous Zn batteries. Zn metal deposition‐dissolution in aqueous electrolytes is typically determined by Zn anode–electrolyte interfaces. In this work, the role of a long‐chain polyethylene oxide (PEO) polymer as a multifunctional electrolyte additive in stabilizing Zn metal anodes is reported. PEO molecules suppress Zn 2+ ion transfer kinetics and regulate Zn 2+ ion concentration in the vicinity of Zn anodes through interactions between ether groups of PEO and Zn 2+ ions. The suppressed Zn 2+ ion transfer kinetics and homogeneous Zn 2+ ion distribution at the interface promotes dendrite‐free homogeneous Zn deposition. In addition, electrochemically inert PEO molecules adsorbed onto Zn anodes can protect the anode surfaces from H 2 generation and, thereby, enhance their electrochemical stability. Stable cycling over 3000 h and high reversibility (Coulombic efficiency > 99.5%) of Zn anodes is demonstrated in 1 m ZnSO 4 electrolyte with 0.5 wt% PEO. This finding provides helpful insights into the mechanism of Zn metal anodes stabilization by low‐cost multifunctional polymer electrolyte additives that stabilize interfacial reactions.

Jin, Yan↗

Reaction heterogeneity in practical high-energy lithium–sulfur pouch cells

The lithium–sulfur (Li–S) battery is a promising next-generation energy storage technology because of its high theoretical energy and low cost. Extensive research efforts have been made on new materials and advanced characterization techniques for mechanistic studies. However, it is uncertain how discoveries made on the material level apply to realistic batteries due to limited analysis and characterization of real high-energy cells, such as pouch cells. Evaluation of pouch cells (>1 A h) (instead of coin cells) that are scalable to practical cells provides a critical understanding of current limitations which enables the proposal of strategies and solutions for further performance improvement. Herein, we design and fabricate pouch cells over 300 W h kg -1 , compare the cell parameters required for high-energy pouch cells, and investigate the reaction processes and their correlation to cell cycling behavior and failure mechanisms. Spatially resolved characterization techniques and fluid-flow simulation reveal the impacts of the liquid electrolyte diffusion within the pouch cells. We found that catastrophic failure of high-energy Li–S pouch cells results from uneven sulfur/polysulfide reactions and electrolyte depletion for the first tens of cycles, rather than sulfur dissolution as commonly reported in the literature. The uneven reaction stems from limited electrolyte diffusion through the porous channels into the central part of thick cathodes during cycling, which is amplified both across the sulfur electrodes and within the same electrode plane. A combination of strategies is suggested to increase sulfur utilization, improve nanoarchitectures for electrolyte diffusion and reduce consumption of the electrolytes and additives.

25 ENERGY STORAGE↗

Understanding and applying coulombic efficiency in lithium metal batteries

Coulombic Efficiency (CE) has been widely used in battery research as a quantifiable monitor to compare the properties and performances of materials, electrolytes, interfaces and the entire electrochemical cells. While CE with ultra high precision effectively predicts the lifespan and health for lithium ion (Li-ion) batteries, it is not necessarily true in rechargeable lithium (Li) metal batteries. A large variation of CE is often seen even from the same materials and electrolytes in Li metal cells. This work discusses the fundamental definition of CE in different configurations of Li metal-based cells. The similarities and differences of CE in Li-ion and Li metal cells have been clarified and used to understand the relevance/irrelevance between CE and cycling. Long-standing goal of this study is to help rational design of cell testing protocols and elaborate electrochemical results. The insights from this work are broadly applicable in many other rechargeable metal cells e.g., Zn, Mg and Na batteries to accelerate reseach innovation.

Xiao, Jie↗

Zinc-iodine secondary energy storage methods, devices, and electrolytes

Disclosed are cathodes having electron-conductive high-surface-area materials, aqueous non-halide-containing electrolytes, secondary zinc-iodine energy storage devices using the same, and methods for assembling the same. The disclosed high-surface-area materials and the aqueous non-halide-containing electrolyte solutions can contribute together to the confinement of the active iodine species in the cathode and to the minimization of shuttle effects and self-discharging. The non-halide-containing electrolyte salts can facilitate preferential adsorption of the iodine species to the cathode material rather than dissolution in the aqueous electrolyte solution, thereby contributing to the confinement of the active iodine species.

25 ENERGY STORAGE↗

Controlling Metal–Organic Framework/ZnO Heterostructure Kinetics through Selective Ligand Binding to ZnO Surface Steps

Metal–organic framework (MOF) heterostructures exhibit unique properties beyond those of individual components, but their design requires an understanding of energetic and kinetic controls at MOF–substrate interfaces. Although the structural relationship has been widely used in heterostructure design, it overlooks the interplay between the organic ligand and the substrate which controls the kinetics and energetics of growth of the final structure. In this study, we used zeolitic imidazolate frameworks (ZIF-8) on ZnO as a model system to evaluate this interplay via in situ monitoring and simulations. Our results demonstrate multiple roles of the 2-methyl-imidazole (2-MIM) ligand as “dissolution-promoter”, “step-pinner”, and “terrace-binder” on the ZnO (001) face and “dissolution-promoter” and “terrace-binder” on the ZnO (100) face. Through these multiple face-specific roles, 2-MIM modulates ZnO dissolution kinetics and, hence, the Zn 2+ release rate, tuning local supersaturations that dictating the characteristic ZIF-8 crystallization kinetics on different substrate faces. The critical thickness for transition from 2D to 3D growth is dictated by competition between interfacial and strain energies. The atomic-scale mechanism of the coupled substrate dissolution and MOF growth, mediated by selective linker–substrate binding, furnishes a new synthesis pathway for other complex heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid anodes for energy storage devices

Energy storage devices having hybrid anodes can address at least the problems of active material consumption and anode passivation that can be characteristic of traditional batteries. The energy storage devices each have a cathode separated from the hybrid anode by a separator. The hybrid anode includes a carbon electrode connected to a metal electrode, thereby resulting in an equipotential between the carbon and metal electrodes.

25 ENERGY STORAGE↗

All-vanadium sulfate acid redox flow battery system

All-vanadium sulfate redox flow battery systems have a catholyte and an anolyte comprising an aqueous supporting solution including chloride ions and phosphate ions. The aqueous supporting solution stabilizes and increases the solubility of vanadium species in the electrolyte, allowing an increased vanadium concentration over a desired operating temperature range. According to one example, the chloride ions are provided by MgCl2, and the phosphate ions are provided by (NH4)2HPO4.

25 ENERGY STORAGE↗