Engineering Papers⌕ Search

Engineering topics

Liu, Hui

Publications and source records attributed to Liu, Hui.

155 records · Page 9

Interfacial bonding and electronic structure of GaN/GaAs interface: A first-principles study

Understanding of GaN interfacing with GaAs is crucial for GaN to be an effective interfacial layer between high-k oxides and III-V materials with the application in high-mobility metal-oxide-semiconductor field effect transistor (MOSFET) devices. Utilizing first principles calculations, here, we investigate the structural and electronic properties of the GaN/GaAs interface with respect to the interfacial nitrogen contents. The decrease of interfacial N contents leads to more Ga dangling bonds and As-As dimers. At the N-rich limit, the interface with N concentration of 87.5% shows the most stability. Furthermore, a strong band offsets dependence on the interfacial N concentration is also observed. The valance band offset of N7 with hybrid functional calculation is 0.51 eV. The electronic structure analysis shows that significant interface states exist in all the GaN/GaAs models with various N contents, which originate from the interfacial dangling bonds and some unsaturated Ga and N atoms. These large amounts of gap states result in Fermi level pinning and essentially degrade the device performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Research on a Pulmonary Nodule Segmentation Method Combining Fast Self-Adaptive FCM and Classification

The key problem of computer-aided diagnosis (CAD) of lung cancer is to segment pathologically changed tissues fast and accurately. As pulmonary nodules are potential manifestation of lung cancer, we propose a fast and self-adaptive pulmonary nodules segmentation method based on a combination of FCM clustering and classification learning. The enhanced spatial function considers contributions to fuzzy membership from both the grayscale similarity between central pixels and single neighboring pixels and the spatial similarity between central pixels and neighborhood and improves effectively the convergence rate and self-adaptivity of the algorithm. Experimental results show that the proposed method can achieve more accurate segmentation of vascular adhesion, pleural adhesion, and ground glass opacity (GGO) pulmonary nodules than other typical algorithms.

59 BASIC BIOLOGICAL SCIENCES↗

Extraordinary Hall effect and universal scaling in Fe{sub x}(ZnO){sub 1–x} granular thin films at room temperature

On the benefit of the concept of the so-called diluted magnetic oxides, Fe{sub x}(ZnO){sub 1–x} (x = 0.50–0.85) granular thin films with different thickness through 2D and 3D percolation region were prepared by ion beam assisted deposition. All samples are ferromagnetic at room-temperature due to the ferromagnetic nature of the Fe-doped ZnO matrix, which is quite different from the superparamagnetic behavior in the insulator-matrix based granular films. Along with decreasing thickness, the Hall coefficient R{sub S} is largely enhanced. The maximum R{sub S} reaches 4.27 × 10{sup −7} m{sup 3}/C in ∼2.8 nm Fe{sub 0.6}(ZnO){sub 0.4} granular film, which is nearly 9 times larger than the R{sub S} (4.64 × 10{sup −8} m{sup 3}/C) of the ∼50 nm Fe{sub 0.6}(ZnO){sub 0.4} sample. Meanwhile, the R{sub S} could maintain in a wide temperature region from 10 K to 300 K and the Hall sensitivity reaches ∼130 V/AT at room-temperature. The scaling exponential of n = 1.7 ± 0.1 in σ{sub xy}∼σ{sub xx}{sup n} is observed, fitting well with the recent developed universal scaling theory characterized by n = 1.6 in the dirty limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the electric field formation in a multi-cusped magnetic field

The multi-cusped field thruster is a kind of electric thruster adopting a cusped magnetic field to achieve a potentially longer lifetime. It is observed in some experiments that the main electric potential drop forms near the exhaust plane, but the formation mechanism of the electric field in this kind of thrusters is not fully clear yet. Based on the analysis of the electron movement, a 2D Particle-in-Cell plus Monte Carlo model is built to reveal the difference of the constraint to electrons between the central leak path and the lateral region of the thruster. Electron trajectories from cathode are analyzed furthermore. It is found that the central leak path inside the discharge channel may play a significant role in the formation of the main electric potential drop near the exhaust plane.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A new background distribution-based active contour model for three-dimensional lesion segmentation in breast DCE-MRI

Purpose: To develop and evaluate a computerized semiautomatic segmentation method for accurate extraction of three-dimensional lesions from dynamic contrast-enhanced magnetic resonance images (DCE-MRIs) of the breast. Methods: The authors propose a new background distribution-based active contour model using level set (BDACMLS) to segment lesions in breast DCE-MRIs. The method starts with manual selection of a region of interest (ROI) that contains the entire lesion in a single slice where the lesion is enhanced. Then the lesion volume from the volume data of interest, which is captured automatically, is separated. The core idea of BDACMLS is a new signed pressure function which is based solely on the intensity distribution combined with pathophysiological basis. To compare the algorithm results, two experienced radiologists delineated all lesions jointly to obtain the ground truth. In addition, results generated by other different methods based on level set (LS) are also compared with the authors’ method. Finally, the performance of the proposed method is evaluated by several region-based metrics such as the overlap ratio. Results: Forty-two studies with 46 lesions that contain 29 benign and 17 malignant lesions are evaluated. The dataset includes various typical pathologies of the breast such as invasive ductal carcinoma, ductal carcinomain situ, scar carcinoma, phyllodes tumor, breast cysts, fibroadenoma, etc. The overlap ratio for BDACMLS with respect to manual segmentation is 79.55% ± 12.60% (mean ± s.d.). Conclusions: A new active contour model method has been developed and shown to successfully segment breast DCE-MRI three-dimensional lesions. The results from this model correspond more closely to manual segmentation, solve the weak-edge-passed problem, and improve the robustness in segmenting different lesions.

60 APPLIED LIFE SCIENCES↗

Phosphate single mode large mode area all-solid photonic crystal fiber with multi-watt output power

An index-depressed active core, single-mode phosphate all-solid large-mode-area photonic crystal fiber (PCF) is theoretically investigated using full-vectorial finite difference approach and experimentally realized. The PCF has a maximum output power of 5.4 W and 31% slope efficiency. Single-mode operation is realized through PCFs with core diameters of 30, 35, and 40 μm, respectively. The beam quality is not degraded even at maximum output power. Our simulations and experiments reveal that the laser performance is significantly affected by the center-to-center distance between the two nearest rods Λ, the rod diameter d, and their ratio d/Λ, implying that much attention should be given in employing optimal parameters to achieve excellent laser performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of TiO{sub 2} film thickness on photovoltaic properties of dye-sensitized solar cell and its enhanced performance by graphene combination

Graphical abstract: - Highlights: • DSSC based on TiO{sub 2} film with 8 printing layers showed the highest efficiency. • The photoelectric conversion efficiency of the DSSC increased from 5.52% to 6.49% by graphene combination. • A mechanism for the enhanced performance of the DSSC was proposed. - Abstract: Dye-sensitized solar cells based on TiO{sub 2} films with different printing layers (6-10) were fabricated by screen printing method. The prepared samples were characterized by scanning electron microscopy, X-ray diffraction and UV–vis absorption spectroscopy. The effects of thickness on the photoelectric conversion performance of the as-fabricated DSSCs were investigated. An optimum photoelectric conversion efficiency of 5.52% was obtained in a DSSC with 8 printing layers. Furthermore, after a moderate amount of graphene was combined with TiO{sub 2}, the photoelectric conversion efficiency of the DSSC based on graphene/TiO{sub 2} composite film rose from 5.52% to 6.49%, with an increase of η by 17.6%. The results indicated that graphene not only enhances the transport of electrons from the film to the fluorine doped tin oxide substrates and reduces the charge recombination rate, but also reduces the electrolyte–electrode interfacial resistance, clearly increasing the photoelectric conversion efficiency.

36 MATERIALS SCIENCE↗

Single-crystal-like NiO colloidal nanocrystal-aggregated microspheres with mesoporous structure: Synthesis and enhanced electrochemistry, photocatalysis and water treatment properties

A new microwave-assisted hydrothermal synthetic route based on the self-assembly and subsequently controlled thermal decomposition process is proposed to fabricate nickel oxide colloidal nanocrystal aggregated microspheres (CNAMs) with mesoporous structure. XRD, EDS, SEM, TEM. FTIR, and N{sub 2} adsorption and desorption isotherm techniques are employed for morphology and structure characterizations. The as-prepared nickel oxide CNAMs, which has a high surface area (234 m{sup 2}/g) with narrow pore distribution at around 3.25 nm, are composed of numerous hexagonal mesoporous nanocrystals of approximately 50–60 nm in size, and present a single-crystal-like characteristic. The experimental results also demonstrated that the CNAMs showed outstanding performance in electrochemistry, photocatalysis and waste water treatment due to their special hierarchical and mesoporous structure, presenting the promising candidate for catalysis and catalysis support materials. - Graphical abstract: CNAMs with mesoporous structure synthesized via a simple microwave-assisted hydrothermal method was applied in electrochemistry and catalysis and exhibited enhanced performance. Display Omitted - Highlights: • CNAMs with mesoporous structure are achieved via a simple microwave-assisted hydrothermal method. • Morphology, structure and pore distribution of sample particles is specifically controlled. • The samples show enhanced properties in electrochemistry and catalysis due to hierarchical structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NGF induces adult stem Leydig cells to proliferate and differentiate during Leydig cell regeneration

Highlights: •Nerve growth factor has shown significant changes on mRNA levels during Adult Leydig cells regeneration. •We established the organ culture model of rat seminiferous tubules with ethane dimethyl sulphonate (EDS) treatment. •Nerve growth factor has shown proliferation and differentiation-promoting effects on Adult stem Leydig cells. •Nerve growth factor induces progenitor Leydig cells to proliferate and differentiate and immature Leydig cells to proliferate. -- Abstract: Nerve growth factor (NGF) has been reported to be involved in male reproductive physiology. However, few reports have described the activity of NGF during Leydig cell development. The objective of the present study was to examine the role of NGF during stem-Leydig-cell (SLC) regeneration. We investigated the effects of NGF on Leydig-cell (LC) regeneration by measuring mRNA levels in the adult rat testis after ethane dimethanesulfonate (EDS) treatment. Furthermore, we used the established organ culture model of rat seminiferous tubules to examine the regulation of NGF during SLC proliferation and differentiation using EdU staining, real-time PCR and western blotting. Progenitor Leydig cells (PLCs) and immature Leydig cells (ILCs) were also used to investigate the effects of NGF on LCs at different developmental stages. NGF mRNA levels changed significantly during Leydig-cell regeneration in vivo. In vitro, NGF significantly promoted the proliferation of stem Leydig cells and also induced steroidogenic enzyme gene expression and 3β-HSD protein expression. The data from PLCs and ILCs showed that NGF could increase Cyclin D1 and Hsd 17b3 mRNA levels in PLCs and Cyclin D1 mRNA levels in ILCs. These results indicate that NGF may play an important role during LC regeneration by regulating the proliferation and differentiation of LCs at different developmental stages, from SLCs to PLCs and from PLCs to ILCs. The discovery of this effect of NGF on Leydig cells will provide useful information for developing new potential therapies for PADAM (Partial Androgen Deficiency in the Aging Male)

60 APPLIED LIFE SCIENCES↗

Large coercivity and exchange bias in [Fe{sub 1-{delta}}(FeO){sub {delta}}]{sub x}(TiO{sub 2}){sub 1-x} granular films

[Fe{sub 1-{delta}}(FeO){sub {delta}}]{sub x}(TiO{sub 2}){sub 1-x} (0{<=}{delta}{<=}0.91, 0.34{<=}x{<=}0.54) granular films were fabricated by magnetron sputtering. Large coercivity (H{sub C} = 10.5 kOe) and exchange-bias-field (H{sub E} = 6.5 kOe) at 5 K were found in the film with {delta}=0.84 and x = 0.48. AC susceptibility measurements exhibit a frequency (f) dependent peak T{sub f} in the in-phase susceptibility curve. The fitting of the relation of T{sub f} vs f with both the Vogel-Fulcher law and critical slowing down theory indicate that the evident enhancement of the H{sub C} and H{sub E} can be qualitatively ascribed to the existence of cluster-spin glass state. The results may help to deeply understand the origin of exchange bias and related effects.

36 MATERIALS SCIENCE↗

Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers by hydrothermal route: Luminescence properties

Highlights: ► Uniform Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were synthesized via a hydrothermal route and thermal decomposition. ► The length and diameter of Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were about 3–9 μm and 300 nm, respectively. ► Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers presented a broad R band at 696 nm when excited at 400 nm. ► It is shown that the 0.07 mol% of doping concentration of Cr{sup 3+} ions in α-Al{sub 2}O{sub 3}:Cr{sup 3+} is optimum. ► Critical distance between Cr{sup 3+} ions for energy transfer was determined to be 38 Å. -- Abstract: Uniform Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were synthesized by using a hydrothermal route and thermal decomposition of a precursor of Cr{sup 3+} doped ammonium aluminum hydroxide carbonate (denoted as AAHC), and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence (PL) spectra and decay curves. XRD indicated that Cr{sup 3+} doped samples calcined at 1473 K were the most of α-Al{sub 2}O{sub 3} phase. SEM showed that the length and diameter of these Cr{sup 3+} doped alumina microfibers were about 3–9 μm and 300 nm, respectively. PL spectra showed that the Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers presented a broad R band at 696 nm. It is shown that the 0.07 mol% of doping concentration of Cr{sup 3+} ions in α-Al{sub 2}O{sub 3}:Cr{sup 3+} was optimum. According to Dexter's theory, the critical distance between Cr{sup 3+} ions for energy transfer was determined to be 38 Å. It is found that the curve followed the single-exponential decay.

36 MATERIALS SCIENCE↗