Engineering Papers⌕ Search

Engineering topics

Liu, G

Publications and source records attributed to Liu, G.

32 records · Page 2

A Comparison of TWP-ICE Observational Data with Cloud-Resolving Model Results

Observations made during the TWP-ICE campaign are used to drive and evaluate thirteen cloud-resolving model simulations with periodic lateral boundary conditions. The simulations employ 2D and 3D dynamics, one- and two-moment microphysics, several variations on large-scale forcing, and the use of observationally derived aerosol properties to prognose droplet numbers. When domain means are averaged over a 6-day active monsoon period, all simulations reproduce observed surface precipitation rate but not its structural distribution. Simulated fractional areas covered by convective and stratiform rain are uncorrelated with one another, and are both variably overpredicted by up to a factor of {approx}2. Stratiform area fractions are strongly anticorrelated with outgoing longwave radiation (OLR) but are negligibly correlated with ice water path (IWP), indicating that ice spatial distribution controls OLR more than mean IWP. Overpredictions of OLR tend to be accompanied by underpredictions of reflected shortwave radiation (RSR). When there are two simulations differing only in microphysics scheme or large-scale forcing, the one with smaller stratiform area tends to exhibit greater OLR and lesser RSR by similar amounts. After {approx}10 days, simulations reach a suppressed monsoon period with a wide range of mean precipitable water vapor, attributable in part to varying overprediction of cloud-modulated radiative flux divergence compared with observationally derived values. Differences across the simulation ensemble arise from multiple sources, including dynamics, microphysics, and radiation treatments. Close agreement of spatial and temporal averages with observations may not be expected, but the wide spreads of predicted stratiform fraction and anticorrelated OLR indicate a need for more rigorous observation-based evaluation of the underlying micro- and macrophysical properties of convective and stratiform structures.

58 GEOSCIENCES↗

Structural and thermoelectric properties of BaRCo{sub 4}O{sub 7} (R = Dy, Ho, Er, Tm, Yb, and Lu)

The structure and thermoelectric properties of a series of barium lanthanide cobaltites, BaRCo{sub 4}O{sub 7} (R = Dy, Ho, Er, Tm, Yb, and Lu), which were prepared using the spark plasma synthesis technique, have been investigated. The space group of these compounds was re-determined and confirmed to be P31c instead of the reported P6{sub 3}mc. The lattice parameters a and c range from 6.26279(2) Angst to 6.31181(6) Angst , and from 10.22468(6) Angst to 10.24446(15) Angst for R = Lu to Dy, respectively. The crystal structure of BaRCo{sub 4}O{sub 7} is built up from Kagome sheets of CoO{sub 4} tetrahedra, linked by triangular layers of CoO{sub 4} tetrahedra. The values of figure of merit (ZT) of the BaRCo{sub 4}O{sub 7} samples were determined to be around 0.02 at 800 K. X-ray diffraction patterns of these samples have been determined and submitted to the Powder Diffraction File.

36 MATERIALS SCIENCE↗

Phase equilibria of the Ba-Sm-Y-Cu-O system for coated conductor applications

The complex phase relationships near the BaO-poor region of the quaternary Ba-Sm-Y-Cu-O oxide system prepared in pure air (p{sub O{sub 2}}=22 kPa, 950 {sup o}C) and in 0.1% O{sub 2} (p{sub O{sub 2}}=100 Pa, 810 {sup o}C) have been determined. This investigation also included the subsolidus compatibilities in ten subsystems (Ba-Sm-Y-O, Ba-Sm-Cu-O, Ba-Y-Cu-O, Sm-Y-Cu-O, Ba-Sm-O, Ba-Y-O, Ba-Cu-O, Sm-Y-O, Sm-Cu-O, and Y-Cu-O), and the homogeneity range of five solid solutions (Ba(Sm{sub x}Y{sub 2-x})CuO{sub 5}, (Sm,Y){sub 2}O{sub 3}, (Sm,Y){sub 2}CuO{sub 4}, (Y,Sm){sub 2}Cu{sub 2}O{sub 5}, and Ba(Sm,Y){sub 2}O{sub 4}). The single phase range of the superconductor solid solution, (Ba{sub 2-x}Sm{sub x})(Sm{sub 1-y}Y{sub y})Cu{sub 3}O{sub 6+z}, and the phase compatibilities in its vicinity, which are particularly important for processing, are described in detail. The phase equilibrium data of the Ba-Sm-Y-Cu-O system will enable the improvement of the intrinsic superconducting properties of second-generation wires, and facilitate the flux-pinning process. -- Graphical Abstract: Phase diagram overview of the Ba-Sm-Y-Cu-O system in the BaO-poor region prepared in p{sub O2}=22 kPa, 950 {sup o}C. Display Omitted

36 MATERIALS SCIENCE↗

Destruction of SO2 on Au and Cu Nanoparticles Dispersed on MgO(100) and CeO2(111)

When going from periodic surfaces to isolated clusters or nanoparticles, there is a big increase in the reactivity of Au and Cu toward SO{sub 2}. Density functional calculations indicate that the enhancement in the SO{sub 2} adsorption energy is due to the presence of corner sites (i.e., metal atoms with a low coordination number) and the fluxionality of the nanoparticles. Therefore, small Au particles bind SO{sub 2} stronger than a periodic Au(100) surface. However, the S ? Au and O ? Au interactions are not strong enough to induce the rupture of the S-O bonds. In contrast, the dissociation of SO{sub 2} on Cu particles is a very exothermic process, even more exothermic than on a periodic Cu(100) surface. Experiments of synchrotron-based high-resolution photoemission and X-ray absorption spectroscopy show big differences in the DeSOx activity of Au and Cu nanoparticles dispersed on MgO(100) and CeO{sub 2}(111). The heat of adsorption of the SO{sub 2} on Au nanoparticles supported on MgO(100) or CeO{sub 2}(111) was 0.2 to 0.4 eV larger than on Au(100) with negligible dissociation of the molecule. The full decomposition of SO{sub 2} was observed only after O vacancies were introduced in the ceria support. The O vacancies in ceria either played a direct role in the dissociation of SO{sub 2} (cracking of the molecule at the oxide-metal interface) or enhanced the chemical activity of the supported Au nanoparticles. The addition of Cu particles to MgO(100) or CeO{sub 2}(111) generates systems that are extremely active for the destruction of SO{sub 2}. At 100-150 K, the SO{sub 2} adsorbs molecularly on the supported Cu particles. Heating to temperatures above 200 K leads to massive dissociation of the SO{sub 2}. A comparison of the behavior of SO{sub 2} on Cu/MgO(100) and Cu/CeO{sub 2-x}(111) shows how important the reducibility of the oxide support in DeSOx operations can be.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Do aqueous ternary complexes influence the TALSPEAK process?

The aqueous speciation of trivalent lanthanide and actinide cations in solutions containing DTPA (diethylenetriamine-N,N,N',N',N'-pentaacetic acid) and lactic acid were studied under conditions representative of the TALSPEAK process. Spectrophotometric titrations, fluorescence spectroscopy, and thermometric titrations were used to search for indications of ternary metal-DTPA-lactate complexes. The addition of lactate anions to metal-DTPA complexes was undetectable by any of these techniques, even at free lactate concentrations of 0.75 M. Although lactic acid is necessary for the optimal performance of the TALSPEAK process, we find that the fractions of aqueous ternary Ln3+/An3+-DTPA-lactate complexes are far too low to account for the observed acid dependence of TALSPEAK metal extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase equilibria and crystal chemistry of the R-Cu-Ti-O systems (R=lanthanides and Y)

As part of the study of interaction of the Ba{sub 2}RCu{sub 3}O{sub 6+z} (R=lanthanides and Y) superconductor with SrTiO{sub 3} buffer, phase equilibria of the subsystem, R{sub 2}O{sub 3}-TiO{sub 2}-CuO (R=Nd, Y, and Yb), have been investigated in air at 960 deg. C. While the phase relationships of the two phase diagrams with smaller R (Y and Yb) are similar, substantial differences were found in the Nd{sub 2}O{sub 3}-TiO{sub 2}-CuO system, partly due to different phase formation in the binary R{sub 2}O{sub 3}-TiO{sub 2} and R{sub 2}O{sub 3}-CuO systems. R{sub 2}CuTiO{sub 6} and R{sub 2}Cu{sub 9}Ti{sub 12}O{sub 36} were the only ternary phases established in all the three diagrams. R{sub 2}Cu{sub 9}Ti{sub 12}O{sub 36} belongs to the perovskite-related [AC{sub 3}](B{sub 4})O{sub 12} family which is cubic Im3. Depending on the size of R{sup 3+}, R{sub 2}CuTiO{sub 6} crystallizes in two crystal systems: Pnma (R=La-Gd), and P6{sub 3}cm (R=Dy-Lu). The structure and crystal chemistry of the Pnma series of R{sub 2}CuTiO{sub 6} (R=La, Nd, Sm, Eu, and Gd) are discussed in detail in this paper. Patterns for selected members of R{sub 2}CuTiO{sub 6} have also been prepared and submitted for inclusion in the Powder Diffraction File (PDF). - Graphical abstract: Phase diagram of the Y{sub 2}O{sub 3}-CuO-TiO{sub 2} system prepared in air at 960 deg. C

36 MATERIALS SCIENCE↗

Micro/Nanomanufacturing in Support of Materials Science

With its LiMiNT facility (Lithography for Micro- and Nanotechnology), Singapore Synchrotron Light Source (SSLS) provides a one-stop shop for micro/nano fabrication on large areas (typically 4'' diameter). Synchrotron deep X-ray lithography, eventually enhanced by the super-resolution process, is used to simultaneously pattern large numbers of micro/nano structures into a resist. Laser direct writer or electron beam serve as primary pattern generators, in particular, for mask making. Structure heights of >1 mm, aspect ratios of >200, and minimum sizes of <200 nm have been achieved, not necessarily simultaneously. Such structures may be replicated into a variety of metals and plastics. Tilting, rotating of the mask-substrate stack during exposure enables the parallel production of nearly 3D structures. Application fields include electromagnetic metamaterials, X-ray and infrared optics, photonics, lasers, quantum technology, precision manufacturing, and fluidics. SSLS is serving a growing community of users and customers.

36 MATERIALS SCIENCE↗

NMR and X-RAY Structures of Human E2-like Ubiquitin-fold Modifier Conjugating Enzyme 1 (UFC1) Reveal Structural and Functional Conservation in the Metazoan UFM1-UBA5-UFC1 Ubiquination Pathway

For cell regulation, E2-like ubiquitin-fold modifier conjugating enzyme 1 (Ufc1) is involved in the transfer of ubiquitin-fold modifier 1 (Ufm1), a ubiquitin like protein which is activated by E1-like enzyme Uba5, to various target proteins. Thereby, Ufc1 participates in the very recently discovered Ufm1-Uba5-Ufc1 ubiquination pathway which is found in metazoan organisms. The structure of human Ufc1 was solved by using both NMR spectroscopy and X-ray crystallography. The complementary insights obtained with the two techniques provided a unique basis for understanding the function of Ufc1 at atomic resolution. The Ufc1 structure consists of the catalytic core domain conserved in all E2-like enzymes and an additional N-terminal helix. The active site Cys116, which forms a thio-ester bond with Ufm1, is located in a flexible loop that is highly solvent accessible. Based on the Ufc1 and Ufm1 NMR structures, a model could be derived for the Ufc1-Ufm1 complex in which the C-terminal Gly83 of Ufm1 may well form the expected thio-ester with Cys116, suggesting that Ufm1-Ufc1 functions as described for other E1-E2-E3 machineries. a-helix 1 of Ufc1 adopts different conformations in the crystal and in solution, suggesting that this helix plays a key role to mediate specificity.

59 BASIC BIOLOGICAL SCIENCES↗

X-ray and neutron powder diffraction studies of Ba(Nd{sub x}Y{sub 2-x})CuO{sub 5}

Ba(R,R'){sub 2}CuO{sub 5} (R,R'=lanthanides and Y) plays an important role as a flux-pinning agent in enhancing the superconducting properties of the Ba{sub 2}(R,R')Cu{sub 3}O{sub 6+x} (R,R'=lanthanides and Y) coated conductors. Using X-ray diffraction and neutron diffraction, we found that the Ba(Nd{sub x}Y{sub 2-x})CuO{sub 5} solid solution adopts two structure types. In the Nd-rich region (1.8{<=}x{<=}2.0), the materials are of brown color (commonly referred to as the 'brown phase'), and the structure is tetragonal with space group I4/mbm (no. 127). In the Y-rich region (0.0{<=}x{<=}1.4), the materials are green (commonly referred to as the 'green phase') and the structure is orthorhombic with space group Pnma (no. 62). A two-phase region (1.4<x<1.8) exists between the orthorhombic and tetragonal phases. The crystal chemistry and crystallography of the orthorhombic 'green phase' series, Ba(Nd{sub x}Y{sub 2-x})CuO{sub 5} (isostructural to BaY{sub 2}CuO{sub 5}), are discussed in this paper. - Graphical abstract: Perspective view of the 'green phase' Ba(Nd{sub x}Y{sub 2-x})CuO{sub 5} structure along the b-axis, showing the isolated square pyramids of [CuO{sub 5}] and the trigonal prisms, RO{sub 7}, around the lanthanide sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computer simulation as a NOx reduction design tool

Nalco Mobotec engineers were charged with reducing emissions on a utility boiler converted from burning oil to eastern bituminous coal using the company's Rotamix selective noncatalytic reduction (SNCR) system which injects urea into the furnace. A CFD simulation of the existing boiler was first conducted and then the furnace was simulated with the SNCR system added and the design was optimised. Operating and capital costs were minimised by optimal placement of 50 injector ports. 6 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Advances in the development of wire mesh reactor for coal gasification studies - article no. 084102

In an effort to further understand the coal gasification behavior in entrained-flow gasifiers, a high pressure and high temperature wire mesh reactor with new features was recently built. An advanced LABVIEW-based temperature measurement and control system were adapted. Molybdenum wire mesh with aperture smaller than 70 {mu} m and type D thermocouple were used to enable high carbon conversion ({gt}90%) at temperatures {gt}1000 {sup o}C. Gaseous species from wire mesh reactor were quantified using a high sensitivity gas chromatography. The material balance of coal pyrolysis in wire mesh reactor was demonstrated for the first time by improving the volatile's quantification techniques.

01 COAL, LIGNITE, AND PEAT↗

The Effects of Various Conductive Additive and Polymeric Binder Contents on the Performance of a Lithium-ion Composite

Fundamental electrochemical methods, cell performance tests, and physical characterization tests such as electron microscopy were used to study the effects of levels of the inert materials (acetylene black (AB), a nano-conductive additive, and polyvinylidene difluoride (PVDF), a polymer binder) on the power performance of lithium-ion composite cathodes. The electronic conductivity of the AB/PVDF composites at different compositions was measured with a four-point probe direct current method. The electronic conductivity was found to increase rapidly and plateau at a AB:PVDF ratio 0.2:1 (by weight), with 0.8:1 being the highest conductivity composition. AB:PVDF compositions along the plateau of 0.2:1, 0.4:1, 0.6:1 and 0.8:1 were investigated. Electrodes of each of those compositions were fabricated with different fractions of AB/PVDF to active material. It was found that at the 0.8:1 AB:PVDF, the rate performance improved with increases in the AB/PVDF loading, whereas at the 0.2:1 AB:PVDF, the rate performance improved with decreases in the AB/PVDF loading. The impedance of electrodes made with 0.6:1 AB:PVDF was low and relatively invariant.

25 ENERGY STORAGE↗