Engineering Papers⌕ Search

Engineering topics

Liu, Chang

Publications and source records attributed to Liu, Chang.

At least 91 records · Page 5

Bicontinuous nanoporous design induced homogenization of strain localization in metallic glasses

Bicontinuous nanoporous metallic glasses (MG) synergize the outstanding properties of MGs and open-cell nanoporous materials. The low-density and high-specific-surface-area of bicontinuous nanoporous structures have the potential to enhance the applicability of MGs in catalysis, sensors, and lightweight structural designs. In this work, we report molecular dynamics simulations of tensile loading deformation and failure of bicontinuous nanoporous Cu 64 Zr 36 MG with 55% porosity and 4.4 nm ligament size. Results indicate an anomalous mechanical behavior featuring delocalized plastic deformation preceding ductile failure. The deformation follows two mechanisms: i) Necking of ligaments aligned with the loading direction and ii) progressive alignment of randomly oriented ligaments. Failure occurs at 0.16 strain, following massive rupture of ligaments. This work indicates that a bicontinuous nanoporous design is able to effectively delocalize strain localization in a MG due to a combination of size effect on the ductility of MGs resulting in nano ligaments necking and progressive asynchronous alignment of ligaments.

36 MATERIALS SCIENCE↗

A holey cavity for single-transducer 3D ultrasound imaging with physical optimization

Within the compressive sensing (CS) framework, one effective way to increase the likelihood of successful signal reconstruction is to employ random processes in the construction of the sensing matrix. This work presents a 3D holey cavity, with diverse frequency modes, to spectrally code, that is, randomize, the ultrasound wave fields. The simulated results show that the use of such a cavity enables imaging simple or complex targets, such as spheres or the letter E, by only a single transceiver—something that is not possible without the use of a coding structure like the cavity. The effect of noise on imaging results and the size of the targets on the first-order Born approximation (BA) are also investigated. Moreover, this study attempts to optimize the cavity, based on a single numerical metric, such as the sum of singular values (SSV) or mutual coherence (MC). Yet, it will be shown that neither of these metrics can consistently compare the norm-one imaging performance between two cavities of different materials or hole sizes. This leaves finding a quantitative metric for these kinds of optimizations an open problem.

42 ENGINEERING↗

Holographic map for cosmological horizons

Here, we propose a holographic map between Einstein gravity coupled to matter in a de Sitter background and large N quantum mechanics of a system of spins. Holography maps a spin model with a finite-dimensional Hilbert space defined on a version of the stretched horizon into bulk gravitational dynamics. The full Hamiltonian of the spin model contains a nonlocal piece which generates chaotic dynamics, widely conjectured to be a necessary part of quantum gravity, and a local piece which recovers the perturbative spectrum in the bulk.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structure and overstability of resistive modes with runaway electrons

In this paper, we investigate the effects of runaway electron current on the dispersion relation of resistive magnetohydrodynamic modes in tokamaks. We present a new theoretical model to derive the dispersion relation, which is based on the asymptotic analysis of the resistive layer structure of the modes. It is found that in addition to the conventional resistive layer, a new runaway current layer can emerge whose properties depend on the ratio of the Alfvén velocity to the runaway electron convection speed. Due to the contribution from this layer, both the tearing mode and kink mode will have a real frequency in addition to a growth rate. The derived dispersion relation has been compared with numerical results using both a simplified eigenvalue calculation and a M3D-C 1 linear simulation, and good agreement is found in both cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of MHD instabilities with fluid runaway electron model in M3D- C 1

Runaway electrons are generated in a tokamak during the start up, during normal operation and during a plasma disruption. During a disruption, runaway electrons can be accelerated to high energies, potentially damaging the first wall. To predict the consequences of runaway generation during a disruption, it is necessary to consider resonant interactions of runaways with the bulk plasma. Here we consider the interactions of runaways on low mode number tearing modes. We have developed a fluid runaway electron model for the 3D MHD code M3D-C1[Jardin,et al. J Comput. Sci Discovery 6 014002 (2012)]. To benchmark, we have reproduced the MHD linear tearing mode results (with runaway electrons) in a circular cylinder presented in previous analytic studies[[Helander, P., et al, Phys. Plasmas 14 144102 (2007)] and extended here with a numerical eigenvalue calculation. Furthermore, we find that the low mode number tearing mode has a rotation caused by the MHD - runaways interaction, and the toroidal current scale length is much smaller with runaways than that for without and decreases as the runaway speed increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controlled One‐pot Synthesis of Nickel Single Atoms Embedded in Carbon Nanotube and Graphene Supports with High Loading

Abstract Single‐atom catalysts (SACs) have attracted much attentions due to the advantages of high catalysis efficiency and selectivity. However, the controllable and efficient synthesis of SACs remains a significant challenge. Herein, we report a controlled one‐pot synthesis of nickel single atoms embedded on nitrogen‐doped carbon nanotubes (NiSA−N−CNT) and nitrogen‐doped graphene (NiSA−N−G). The formation of NiSA−N−CNT is due to the solid‐to‐solid rolling up mechanism during the high temperature pyrolysis at 800 °C from the stacked and layered Ni‐doped g‐C 3 N 4 , g‐C 3 N 4 −Ni structure to a tubular CNT structure. Addition of citric acid introduces an amorphous carbon source on the layered g‐C 3 N 4 −Ni and after annealing at the same temperature of 800 °C, instead of formation of NiSA−N−CNT, Ni single atoms embedded in planar graphene type supports, NiSA−N−G were obtained. The density functional theory (DFT) calculation indicates the introduction of amorphous carbon source substantially reduces the structure fluctuation or curvature of layered g‐C 3 N 4 ‐Ni intermediate products, thus interrupting the solid‐to‐solid rolling process and leading to the formation of planar graphene type supports for Ni single atoms. The as‐synthesized NiSA−N−G with Ni atomic loading of ∼6 wt% catalysts shows a better activity and stability for the CO 2 reduction reaction (CO 2 RR) than NiSA−N−CNT with Ni atomic loading of ∼15 wt% due to the open and exposed Ni single atom active sites in NiSA−N−G. This study demonstrates for the first time the feasibility in the control of the microstructure of carbon supports in the synthesis of SACs.

Zhao, Shiyong↗

Arabidopsis Dehiscence Zone Polygalacturonase 1 (ADPG1) releases latent defense signals in stems with reduced lignin content

There is considerable interest in engineering plant cell wall components, particularly lignin, to improve forage quality and biomass properties for processing to fuels and bioproducts. However, modifying lignin content and/or composition in transgenic plants through down-regulation of lignin biosynthetic enzymes can induce expression of defense response genes in the absence of biotic or abiotic stress. Arabidopsis thaliana lines with altered lignin through down-regulation of hydroxycinnamoyl CoA:shikimate/quinate hydroxycinnamoyl transferase (HCT) or loss of function of cinnamoyl CoA reductase 1 (CCR1) express a suite of pathogenesis-related (PR) protein genes. The plants also exhibit extensive cell wall remodeling associated with induction of multiple cell wall-degrading enzymes, a process which renders the corresponding biomass a substrate for growth of the cellulolytic thermophile Caldicellulosiruptor bescii lacking a functional pectinase gene cluster. The cell wall remodeling also results in the release of size- and charge-heterogeneous pectic oligosaccharide elicitors of PR gene expression. Genetic analysis shows that both in planta PR gene expression and release of elicitors are the result of ectopic expression in xylem of the gene Arabidopsis Dehiscence Zone Polygalacturonase 1 (ADPG1), which is normally expressed during anther and silique dehiscence. These data highlight the importance of pectin in cell wall integrity and the value of lignin modification as a tool to interrogate the informational content of plant cell walls.

59 BASIC BIOLOGICAL SCIENCES↗

Theoretical Calculation Guided Design of Single-Atom Catalysts toward Fast Kinetic and Long-Life Li–S Batteries

Lithium–sulfur (Li–S) batteries are enticing next-generation energy storage technologies due to their high theoretical energy density, environmental friendliness, and low cost. Yet, low conductivity of sulfur species, dissolution of polysulfides, poor conversion from sulfur reduction, and lithium sulfide (Li 2 S) oxidation reactions during discharge–charge processes hinder their practical applications. Herein, under the guidance of density functional theory calculations, we have successfully synthesized large-scale single atom vanadium catalysts seeded on graphene to achieve high sulfur content (80 wt % sulfur), fast kinetic (a capacity of 645 mAh g –1 at 3 C rate), and long-life Li–S batteries. Both forward (sulfur reduction) and reverse reactions (Li 2 S oxidation) are significantly improved by the single atom catalysts. This finding is confirmed by experimental results and consistent with theoretical calculations. The ability of single metal atoms to effectively trap the dissolved lithium polysulfides (LiPSs) and catalytically convert the LiPSs/Li 2 S during cycling significantly improved sulfur utilization, rate capability, and cycling life. Our work demonstrates an efficient design pathway for single atom catalysts and offers solutions for the development of high energy/power density Li–S batteries.

25 ENERGY STORAGE↗

A Universal Seeding Strategy to Synthesize Single Atom Catalysts on 2D Materials for Electrocatalytic Applications

Abstract Single‐atom catalysts (SACs) are attracting significant attention due to their exceptional catalytic performance and stability. However, the controllable, scalable, and efficient synthesis of SACs remains a significant challenge. Herein, a new and versatile seeding approach is reported to synthesize SACs supported on different 2D materials such as graphene, boron nitride (BN), and molybdenum disulfide (MoS 2 ). This method is demonstrated on the synthesis of Ni, Co, Fe, Cu, Ag, Pd single atoms as well as binary atoms of Ni and Cu codoped on 2D support materials with the mass loading of single atoms in the range of 2.8–7.9 wt%. In particular, the applicability of the new seeding strategy in electrocatalysis is demonstrate on nickel SACs supported on graphene oxide (SANi‐GO), exhibiting excellent catalytic performance for electrochemical CO 2 reduction reaction with a turnover frequency of 325.9 h −1 at a low overpotential of 0.63 V and high selectivity of 96.5% for CO production. The facile, controllable, and scalable nature of this approach in the synthesis of SACs is expected to open new research avenues for the practical applications of SACs.

Zhao, Shiyong↗

Revealing structural evolution of PbS nanocrystal catalysts in electrochemical CO 2 reduction using in situ synchrotron radiation X-ray diffraction

We investigated the structural evolution of PbS catalysts under electrochemical CO 2 reduction reaction (eCO 2 RR) conditions using an in situ synchrotron radiation X-ray diffraction (SR-XRD) technique. The PbS catalyst with an initial form of size-tunable nanocrystals (NCs) performed efficiently in the electrochemical conversion of CO 2 to formate with a record-high mass activity (MA) of 52.2 ± 5.2 mA mg Pb -1 at -1.2 V and 74.9 ± 4.7 mA mg Pb -1 at -1.4 V vs. the reversible hydrogen electrode (RHE). In situ SR-XRD analyses revealed that PbS NCs underwent rapid structural transformation to Pb thin films during the eCO 2 RR, providing the real catalytic surface for the eCO 2 RR. Such a structural change is complex, with PbS first being converted to PbCO 3 and the latter species being further reduced to Pb. This work highlights the importance of understanding environmental impacts on the instability of nanocatalysts under eCO 2 RR conditions and the need for designing more robust electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Performance of a machine learning-based decision model to help clinicians decide the extent of lymphadenectomy (D1 vs. D2) in gastric cancer before surgical resection

Background: Controversy still exists on the optimal surgical resection for potentially curable gastric cancer (GC). Use of radiologic evaluation and machine learning algorithms might predict extent of lymphadenectomy to limit unnecessary surgical treatment. We purposed to design a machine learning-based clinical decision-support model for predicting extent of lymphadenectomy (D1 vs. D2) in local advanced GC. Methods: Clinicoradiologic features available from routine clinical assignments in 557 patients with GCs were retrospectively interpreted by an expert panel blinded to all histopathologic information. All patients underwent surgery using standard D2 resection. Decision models were developed with a logistic regression (LR), support vector machine (SVM) and auto-encoder (AE) algorithm in 371 training and tested in 186 test data, respectively. The primary end point was to measure diagnostic performance of decision model and a Japanese gastric cancer treatment guideline version 4th (JPN 4th) criteria for discriminate D1 (pT1 + pN0) versus D2 (≥ pT1 + ≥ pN1) lymphadenectomy. Results: The decision model with AE analysis produced highest area under ROC curve (train: 0.965, 95% confidence interval (CI) 0.948–0.978; test: 0.946, 95% CI 0.925–0.978), followed by SVM (train: 0.925, 95% CI 0.902–0.944; test: 0.942, 95% CI 0.922–0.973) and LR (train: 0.886, 95% CI 0.858–0.910; test: 0.891, 95% CI 0.891–0.952). By this improvement, overtreatment was reduced from 21.7% (121/557) by treat-all pattern, to 15.1% (84/557) by JPN 4th criteria, and to 0.7–0.9% (4–5/557) by the new approach. Conclusions: The decision model with machine learning analysis demonstrates high accuracy for identifying patients who are candidates for D1 versus D2 resection. Its approximate 14–20% improvements in overtreatment compared to treat-all pattern and JPN 4th criteria potentially increase the number of patients with local advanced GCs who can safely avoid unnecessary lymphadenectomy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗