Engineering topics

Liu, Chang

Publications and source records attributed to Liu, Chang.

17 records

DOE OSTI2025

High‐Speed Slot‐Die Coating with Donor‐Priority Rapid Aggregation Kinetics for Improved Morphology and Efficiency in Ecofriendly Organic Solar Cells

Abstract Solution‐processable organic solar cells (OSCs) represent a promising renewable photovoltaic technology with significant potential for eco‐compatible production. While high power conversion efficiencies (PCEs) have been achieved in OSCs, scaling this technology for high‐throughput manufacturing remains challenging. Key reason lies in the lack of efficient control strategies for the complex and long‐duration morphology evolution during high‐speed coating process with ecofriendly solvents. Here, a donor‐priority rapid aggregation process (DP‐RAP) scheme is proposed to solve this issue by adjusting the aggregation kinetics of donor and acceptor components. DP‐RAP enables blends with a nanoscale fiber network structure and favorable crystallinity, which contributes to balanced carrier transport and reduced recombination losses. As a result, the PCE is improved from 14.3% (reference) to 17.4% (DP‐RAP) for ultra‐high speed coated PM6:BTP‐eC9 devices in atmosphere, which is one of the highest values for non‐halogenated solvent‐processed solar cells at coating speeds of 500 mm s −1 . Moreover, the DP‐RAP based devices remain a stable PCE of approximately 17.4% across a broad range of coating speeds (20–500 mm s −1 ), illustrating its tolerance to the varied manufacturing conditions. This work highlights a promising avenue for the high‐speed, ecofriendly production of efficient OSCs, pushing the boundaries of practical manufacturing in renewable energy technologies.

Chemistry↗

DOE OSTI2024

Sparsity-Independent Lyapunov Exponent in the Sachdev-Ye-Kitaev Model

The saturation of a recently proposed universal bound on the Lyapunov exponent has been conjectured to signal the existence of a gravity dual. This saturation occurs in the low-temperature limit of the dense Sachdev-Ye-Kitaev (SYK) model, N Majorana fermions with q body ( q > 2 ) infinite-range interactions. We calculate certain out-of-time-order correlators (OTOCs) for N ≤ 64 fermions for a highly sparse SYK model and find no significant dependence of the Lyapunov exponent on sparsity up to near the percolation limit where the Hamiltonian breaks up into blocks. This provides strong support to the saturation of the Lyapunov exponent in the low-temperature limit of the sparse SYK. A key ingredient to reaching N = 64 is the development of a novel quantum spin model simulation library that implements highly optimized matrix-free Krylov subspace methods on graphical processing units. This leads to a significantly lower simulation time as well as vastly reduced memory usage over previous approaches, while using modest computational resources. Strong sparsity-driven statistical fluctuations require both the use of a much larger number of disorder realizations with respect to the dense limit and a careful finite size scaling analysis. The saturation of the bound in the sparse SYK points to the existence of a gravity analog that would enlarge substantially the number of field theories with this feature. Published by the American Physical Society 2024

Physics↗

DOE OSTI2024

Efficient Parameterization of Density Functional Tight-Binding for 5 f -Elements: A Th–O Case Study

Density functional tight binding (DFTB) models for f-element species are challenging to parametrize owing to the large number of adjustable parameters. The explicit optimization of the terms entering the semiempirical DFTB Hamiltonian related to f orbitals is crucial to generating a reliable parametrization for f-block elements, because they play import roles in bonding interactions. However, since the number of parameters grows quadratically with the number of orbitals, the computational cost for parameter optimization is much more expensive for the f-elements than for the main group elements. In this work we present a set of efficient approaches for mitigating the hurdle imposed by the large size of the parameter space. A novel group-by-orbital correction functions for two-center bond integrals was developed. With this approach the number of parameters is reduced, and it grows linearly with the number of elements, maintaining the accuracy and the number of parameters, in the case of f elements, by more than 40%. The parameter optimization step was accelerated by means of the mini-batch BFGS method. This method allows parameter optimizations with much larger training sets than other single batch methods. A stochastic optimizer was employed that helped overcome shallow local minima in the objective function. The proposed algorithm was used to parametrize the DFTB Hamiltonian for the Th–O system, which was subsequently applied to the study of ThO 2 nanoparticles. The training set consisted of 6322 unique structures, which is barely feasible with conventional optimization methods. The optimized parameter set, LANL-ThO, displays good agreement with DFT-calculated properties such as energies, forces, and structures for both clusters and bulk ThO 2 . Benefiting from the fewer number of parameters and lower computational costs for objective function evaluations, this new approach shows its potential applications in DFTB parametrization for elements with high angular momentum, which present a challenge to conventional methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Stabilizing alkaline fuel cells with a niobium-doped brookite titanium dioxide catalyst support

Anion-exchange membrane fuel cells represent a promising and scalable approach for hydrogen energy utilization. However, their development is hindered by the weak bonding between metal catalysts and carbon supports, along with challenges in fabricating electronically/ionically conductive electrodes. Here, we report a composite cathode of Nb-doped brookite TiO 2 nanorods that have robust stability when combined with Pt nanoscale catalysts in an alkaline fuel cell. The composite cathode, fabricated without the addition of an ionomer, delivers a power density of 419 mW cm −2 at a current density of 650 mA cm −2 and a voltage retention of 81% at 100 mA cm −2 after 25 h, substantially outperforming a cathode fabricated from commercial Pt/C. Further investigations of the chemical structure, anion exchange capacity, and mass transfer resistance reveal that a solvent residue derived from N-methylpyrrolidone plays an important role in charge transfer and mass transport in the alkaline fuel cell.

alkaline fuel cell↗

DOE OSTI2024

Halogenated Dibenzo[ f , h ]quinoxaline Units Constructed 2D‐Conjugated Guest Acceptors for 19% Efficiency Organic Solar Cells

Abstract Halogenation of Y‐series small‐molecule acceptors (Y‐SMAs) is identified as an effective strategy to optimize photoelectric properties for achieving improved power‐conversion‐efficiencies (PCEs) in binary organic solar cells (OSCs). However, the effect of different halogenation in the 2D‐structured large π‐fused core of guest Y‐SMAs on ternary OSCs has not yet been systematically studied. Herein, four 2D‐conjugated Y‐SMAs (X‐QTP‐4F, including halogen‐free H‐QTP‐4F, chlorinated Cl‐QTP‐4F, brominated Br‐QTP‐4F, and iodinated I‐QTP‐4F) by attaching different halogens into 2D‐conjugation extended dibenzo[ f , h ]quinoxaline core are developed. Among these X‐QTP‐4F, Cl‐QTP‐4F has a higher absorption coefficient, optimized molecular crystallinity and packing, suitable cascade energy levels, and complementary absorption with PM6:L8‐BO host. Moreover, among ternary PM6:L8‐BO:X‐QTP‐4F blends, PM6:L8‐BO:Cl‐QTP‐4F obtains a more uniform and size‐suitable fibrillary network morphology, improved molecular crystallinity and packing, as well as optimized vertical phase distribution, thus boosting charge generation, transport, extraction, and suppressing energy loss of OSCs. Consequently, the PM6:L8‐BO:Cl‐QTP‐4F‐based OSCs achieve a 19.0% efficiency, which is among the state‐of‐the‐art OSCs based on 2D‐conjugated Y‐SMAs and superior to these devices based on PM6:L8‐BO host (17.70%) and with guests of H‐QTP‐4F (18.23%), Br‐QTP‐4F (18.39%), and I‐QTP‐4F (17.62%). The work indicates that halogenation in 2D‐structured dibenzo[ f , h ]quinoxaline core of Y‐SMAs guests is a promising strategy to gain efficient ternary OSCs.

14 SOLAR ENERGY↗

DOE OSTI2024

Surface Engineering Strategy to Synthesize Bicomponent Carbons for Rechargeable Zinc-Air Batteries

Atomic Fe-N x moieties and nanosized FeCo species anchored on carbons have each been demonstrated to be among the most effective active components for oxygen reduction and evolution reactions (ORR/OER), respectively in rechargeable zinc -air batteries (ZABs). However, incorporating both of these components in a single catalyst presents a great challenge due to the trade-off in formation between them during hightemperature preparation. Herein, we integrate them into a bicomponent carbon through a surface engineering strategy. In this process, K 3 [Fe(CN) 6 ] is engineered on the surface of a precursor mixture consisting of polyaniline-coated graphene oxide and ZIF-67. This is followed by pyrolysis to produce the bicomponent carbon catalyst of FeCo nanoparticles modified carbon polyhedron (for accelerating the OER), supported on atomically dispersed Fe -N -doped carbon nanosheet (for boosting the ORR). The catalyst exhibits a small potential gap of 0.69 V for OER/ORR. In situ Raman spectroscopy demonstrates that spinel FeCo oxides may be responsible for OER. The use of this catalyst in ZABs achieves high power densities of 225 mW cm -2 in aqueous electrolyte and 164 mW cm -2 in solid-state electrolyte. Additionally, a small and stable voltage gap of 0.712 V at 10 mA cm -2 is maintained after 1035 discharge -charge cycles demonstrating the great application potential in energy devices.

An, Jia-Xing↗

DOE OSTI2024

Nanoscopic Imaging of Self-Propelled Ultrasmall Catalytic Nanomotors

Ultrasmall nanomotors (<100 nm) are highly desirable nanomachines for their size-specific advantages over their larger counterparts in applications spanning nanomedicine, directed assembly, active sensing, and environmental remediation. While there are extensive studies on motors larger than 100 nm, the design and understanding of ultrasmall nanomotors have been scant due to the lack of high-resolution imaging of their propelled motions with orientation and shape details resolved. Here, we report the imaging of the propelled motions of catalytically powered ultrasmall nanomotors─hundreds of them─at the nanometer resolution using liquid-phase transmission electron microscopy. These nanomotors are Pt nanoparticles of asymmetric shapes (“tadpoles” and “boomerangs”), which are colloidally synthesized and observed to be fueled by the catalyzed decomposition of NaBH4 in solution. Statistical analysis of the orientation and position trajectories of fueled and unfueled motors, coupled with finite element simulation, reveals that the shape asymmetry alone is sufficient to induce local chemical concentration gradient and self-diffusiophoresis to act against random Brownian motion. Our work elucidates the colloidal design and fundamental forces involved in the motions of ultrasmall nanomotors, which hold promise as active nanomachines to perform tasks in confined environments such as drug delivery and chemical sensing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2014

Three-Dimensional Magnetic Restructuring in Two Homologous Solar Flares in the Seismically Active NOAA AR 11283

We carry out a comprehensive investigation comparing the three-dimensional magnetic field restructuring, flare energy release, and the helioseismic response of two homologous flares, the 2011 September 6 X2.1 (FL1) and September 7 X1.8 (FL2) flares in NOAA AR 11283. In our analysis, (1) a twisted flux rope (FR) collapses onto the surface at a speed of 1.5 km s(exp−1) after a partial eruption in FL1. The FR then gradually grows to reach a higher altitude and collapses again at 3 km s(exp−1) after a fuller eruption in FL2. Also, FL2 shows a larger decrease of the flux-weighted centroid separation of opposite magnetic polarities and a greater change of the horizontal field on the surface. These imply a more violent coronal implosion with corresponding more intense surface signatures in FL2. (2) The FR is inclined northward and together with the ambient fields, it undergoes a southward turning after both events. This agrees with the asymmetric decay of the penumbra observed in the peripheral regions. (3) The amounts of free magnetic energy and nonthermal electron energy released during FL1 are comparable to those of FL2 within the uncertainties of the measurements. (4) No sunquake was detected in FL1; in contrast, FL2 produced two seismic emission sources S1 and S2 both lying in the penumbral regions. Interestingly, S1 and S2 are connected by magnetic loops, and the stronger source S2 has a weaker vertical magnetic field. We discuss these results in relation to the implosion process in the low corona and the sunquake generation.

Sun: X-rays↗

NASA NTRS2010

Micromachined Artificial Haircell

A micromachined artificial sensor comprises a support coupled to and movable with respect to a substrate. A polymer, high-aspect ratio cilia-like structure is disposed on and extends out-of-plane from the support. A strain detector is disposed with respect to the support to detect movement of the support.

Liu, Chang↗

NASA NTRS2009

Sensor chip and apparatus for tactile and/or flow sensing

A sensor chip, comprising a flexible, polymer-based substrate, and at least one microfabricated sensor disposed on the substrate and including a conductive element. The at least one sensor comprises at least one of a tactile sensor and a flow sensor. Other embodiments of the present invention include sensors and/or multi-modal sensor nodes.

Liu, Chang↗

NASA NTRS2009

Microfabricated pressure and shear stress sensors

A microfabricated pressure sensor. The pressure sensor comprises a raised diaphragm disposed on a substrate. The diaphragm is configured to bend in response to an applied pressure difference. A strain gauge of a conductive material is coupled to a surface of the raised diaphragm and to at least one of the substrate and a piece rigidly connected to the substrate.

Liu, Chang↗

NASA NTRS2008

Method for fabricating a microscale anemometer

Method for fabricating a microscale anemometer on a substrate. A sacrificial layer is formed on the substrate, and a metal thin film is patterned to form a sensing element. At least one support for the sensing element is patterned. The sacrificial layer is removed, and the sensing element is lifted away from the substrate by raising the supports, thus creating a clearance between the sensing element and the substrate to allow fluid flow between the sensing element and the substrate. The supports are raised preferably by use of a magnetic field applied to magnetic material patterned on the supports.

Liu, Chang↗

NASA NTRS2008

Sensor chip and apparatus for tactile and/or flow sensing

Liu, Chang↗

NASA NTRS2007

Optimizing RHESSI X-ray Imaging

RHESSI X-ray imaging is possible with angular resolution as fine as 2 arcsec (FWHM) at energies from as low as 3 keV to >100 keV. However, taking full advantage of this capability has proven to be challenging given the Fourier-transform imaging technique that is used, specific instrumental considerations that must be taken into account, and the many different options of the available image reconstruction algorithms. Such considerations as the best reconstruction algorithm to use, the optimal weighting of the different Fourier components, deciding between short image integration times and rapid imaging cadence, the different energy ranges covered by the 9 detectors, the effect of pulse pile-up and albedo, etc. must all be taken into account in obtaining and interpreting RHESSI X-ray images. This poster describes different techniques for optimizing the image reconstruction depending on the science objectives - identifying compact or extended sources, searching for source motion, obtaining the best photometry, determining the believability of different features in an image, etc. The emphasis is on making full use of data from all the RHESSI detectors, including the ones behind the finest grids when warranted by the source structure. This is the case for the hard X-ray emission along the ribbons of the flare on 2005 May 13 reported by Liu et al. (2007) and this event will be used as an example.

Dennis, Brian R.↗

NASA NTRS2007

Flexible Skins Containing Integrated Sensors and Circuitry

Artificial sensor skins modeled partly in imitation of biological sensor skins are undergoing development. These sensor skins comprise flexible polymer substrates that contain and/or support dense one- and two-dimensional arrays of microscopic sensors and associated microelectronic circuits. They afford multiple tactile sensing modalities for measuring physical phenomena that can include contact forces; hardnesses, temperatures, and thermal conductivities of objects with which they are in contact; and pressures, shear stresses, and flow velocities in fluids. The sensor skins are mechanically robust, and, because of their flexibility, they can be readily attached to curved and possibly moving and flexing surfaces of robots, wind-tunnel models, and other objects that one might seek to equip for tactile sensing. Because of the diversity of actual and potential sensor-skin design criteria and designs and the complexity of the fabrication processes needed to realize the designs, it is not possible to describe the sensor-skin concept in detail within this article.

Liu, Chang↗

NASA NTRS2005

Microscale out-of-plane anemometer

A microscale out-of-plane thermal sensor. A resistive heater is suspended over a substrate by supports raised with respect to the substrate to provide a clearance underneath the resistive heater for fluid flow. A preferred fabrication process for the thermal sensor uses surface micromachining and a three-dimensional assembly to raise the supports and lift the resistive heater over the substrate.

Liu, Chang↗

NASA NTRS1999

Scaling Laws of Microactuators and Potential Applications of Electroactive Polymers in MEMS

Besides the scale factor that distinguishes the various species, fundamentally biological muscles changes little between species, indicating a highly optimized system. Electroactive polymer actuators offer the closest resemblance to biological muscles, however besides the large actuation displacement these materials are falling short with regards to the actuation force. As improved materials are emerging it is becoming necessary to address key issues such as the need for effective electromechanical modeling and guiding parameters in scaling the actuators. In this paper, we will review the scaling laws for three major actuation mechanisms that are of relevance to micro electromechanical systems: electrostatic actuation, magnetic actuation, thermal bimetallic actuation, and piezoelectric actuation.

Liu, Chang↗