More replenishment than priming loss of soil organic carbon with additional carbon input
Not Available
54 ENVIRONMENTAL SCIENCES↗
Engineering topics
Liu, Bo
Publications and source records attributed to Liu, Bo.
The role of the solid electrolyte interphase layer in preventing Li dendrite growth in solid-state batteries
Lithium (Li) metal anodes have regained intensive interest in recent years due to the ever-increasing demand for next-generation high energy battery technologies. Li metal, unfortunately, suffers from poor cycling stability and low efficiency as well as from the formation of dangerous Li dendrites, raising safety concerns. Utilizing solid-state electrolytes (SSEs) to prevent Li dendrite growth provides a promising approach to tackle the challenge. However, recent studies indicate that Li dendrites easily form at high current densities, which calls for full investigation of the fundamental mechanisms of Li dendrite formation within SSEs. Herein, the origin and evolution of Li dendrite growth through SSEs have been studied and compared by using Li6.1Ga0.3La3Zr2O12 (LLZO) and NASICON-type Li2O–Al2O3–P2O5–TiO2–GeO2 (LATP) pellets as the separators. We discover that a solid electrolyte interphase (SEI)-like interfacial layer between Li and SSE plays a critical role in alleviating the growth of dendritic Li, providing new insights into the interface between SSE and Li metal to enable future all solid-state batteries.
Wu, Bingbin↗
Hydrothermal growth and scintillation properties of γ-CuBr single crystals
Highlights: • Transparent γ-CuBr single crystal with regular shape was successfully grown by hydrothermal method. • The x-ray excited optical luminescence of the γ-CuBr crystal, which exhibits an intensive 430 nm emission, is first reported. • The average decay time of the 430 nm emission is 36.9 ns. - Abstract: A fast scintillation crystal, γ-CuBr, was successfully grown by hydrothermal method with NH{sub 4}Br mineralizer. The element mole ratio of the Cu/Br crystal was about 0.91 caused by the crystal grown in a rich bromine environment. Under ultraviolet excitation, the crystal exhibited an intense 420 nm emission, a shoulder emission at 428 nm and a weak broadband emission at 560 nm, which could be related to free exciton recombination, Cu and Br vacancies, respectively. Furthermore, the X-ray excited optical luminescence of the crystal was first reported, and a strong 430 nm emission was observed. The analysis of luminescence decay kinetics revealed that the 430 nm emission is composed of two components with an average decay time of 36.9 ns. It means that the γ-CuBr crystal is a promising candidate for applications in fast radiation detection.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Magnetic Field Angular Dependence of Magnetization Loss in ReBCO Superconducting Tapes
In the applications of high-temperature superconductors (HTS), the HTS tapes are usually exposed to the external magnetic field with different orientations. The critical current and AC loss are affected by both the field amplitude and field angles due to the anisotropy of HTS tapes. In this work, we first introduce the experimental system to measure the magnetization loss in HTS tapes based on the calibration-free method. Then, we present the magnetization loss results in 4.8-mm-wide AMSC wire, 4-mm-wide SuperPower wire, 4-mm-wide SuNam wire, and 10-mm-wide Fujikura wire in a perpendicular applied field at 77 K. The field amplitude is up to 100 mT, and the frequency varies from 44.2 to 87.1 Hz. We also present the magnetization loss in AMSC wire, SuperPower wire, SuNam wire, and Fujikura wire at different field angles. The field angle varies from 10 to 90 {sup ∘} in 10 {sup ∘} steps. The loss reduction with the decreasing of the field angle shows the anisotropic property of HTS tapes. We finally plot the measured magnetization loss of the samples as a function of the magnetic field amplitude normalized by the field angle to verify an empirical formula.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Single-Crystal Fiber Structures for Harsh Environment Sensing Applications
Presented by NETL at SPIE Defense and Commercial Sensing, 04/18
Buric, Michael↗
Progress Toward Multipoint High Temperature Sensing with Sapphire Optical Fiber for Power Generation
Presented by NETL at ISA Power Industry Division Symposium, 06/18
Chorpening, Benjamin↗
Poplar and shrub willow energy crops in the United States: field trial results from the multiyear regional feedstock partnership and yield potential maps based on the PRISM‐ELM model
Abstract To increase the understanding of poplar and willow perennial woody crops and facilitate their deployment for the production of biofuels, bioproducts, and bioenergy, there is a need for broadscale yield maps. For national analysis of woody and herbaceous crops production potential, biomass feedstock yield maps should be developed using a common framework. This study developed willow and poplar potential yield maps by combining data from a network of willow and poplar field trials and the modeling power of PRISM‐ELM. Yields of the top three willow cultivars across 17 sites ranged from 3.60 to 14.6 Mg ha −1 yr −1 dry weight, while the yields from 17 poplar trials ranged from 7.5 to 15.2 Mg ha −1 yr −1 . Relationships between the environmental suitability estimates from the PRISM‐ELM model and results from field trials had an R 2 of 0.60 for poplar and 0.81 for willow. The resulting potential yield maps reflected the range of poplar and willow yields that have been reported in the literature. Poplar covered a larger geographic range than willow, which likely reflects the poplar breeding efforts that have occurred for many more decades using genotypes from a broader range of environments than willow. While the field trial data sets used to develop these models represent the most complete information at the time, there is a need to expand and improve the model by monitoring trials over multiple cutting cycles and across a broader range of environmental gradients. Despite some limitations, the results of these models represent a dramatic improvement in projections of potential yield of poplar and willow crops across the United States.
09 BIOMASS FUELS↗
Development of a Converter-Based Transmission Line Emulator with Three-Phase Short-Circuit Fault Emulation Capability
A transmission line emulator has been developed to flexibly represent interconnected ac lines under normal operating conditions in a voltage source converter (VSC)-based power system emulation platform. As the most serious short-circuit fault condition, the three-phase short-circuit fault emulation is essential for power system studies. Here, this paper proposes a model to realize a three-phase short-circuit fault emulation at different locations along a single transmission line or one of several parallel-connected transmission lines. At the same time, a combination method is proposed to eliminate the undesired transients caused by the current reference step changes while switching between the fault state and the normal state. Experiment results verify the developed transmission line three-phase short-circuit fault emulation capability.
24 POWER TRANSMISSION AND DISTRIBUTION↗
Coherent addition of high power broad-area laser diodes with a compact VBG V-shaped external Talbot cavity
In this paper, we introduced a compact V-shaped external Talbot cavity for phase locking of high power broad-area laser diodes. The length of compact cavity is ~25 mm. Near diffraction-limit coherent addition of 10 broad-area laser diodes indicated that high quality phase locking was achieved. We measured the near-field emission mode of each individual broad-area laser diode with different feedback, such as a volume Bragg grating and a high reflection mirror. Finally, we found out that the best result of phase locking broad-area laser diodes was achieved by the compact V-shaped external Talbot cavity with volume Bragg grating feedback.
42 ENGINEERING↗
Down-regulation of lncRNA MEG3 promotes hypoxia-induced human pulmonary artery smooth muscle cell proliferation and migration via repressing PTEN by sponging miR-21
Highlights: • Hypoxia induced cell proliferation and migration in PASMCs. • MEG3 expression was down-regulated in PASMCs hypoxia cell models. • MEG3 exerts its role via miR-21/PTEN axis in PASMCs hypoxia cell models. Hypoxia-induced pulmonary hypertension is a life-threatening disease arising from a progressive increase in pulmonary vascular resistance, irreversible pulmonary vascular remodeling and resulting in right ventricular failure. Recent studies suggested that pulmonary artery smooth muscle cell proliferation and migration played an important role in the pathogenesis of hypoxia-induced pulmonary hypertension. However, the mechanisms of hypoxia-induced pulmonary hypertension are complicated and largely unclear. In this study, we discovered that lncRNA MEG3 was down-regulated in human pulmonary artery smooth muscle cell in hypoxia, and inhibition of MEG3 promoted the cell proliferation and cell migration in both normal and hypoxia condition. Further study demonstrated that MEG3 exerted its function via regulation of miR-21 expression in both normal and hypoxia condition. In addition, we displayed the modulation of PTEN by miR-21 and their role in hypoxia. Ultimately, our study illustrated that MEG3 exerts its role via miR-21/PTEN axis in human pulmonary artery smooth muscle cell under both normal and hypoxia conditions.
60 APPLIED LIFE SCIENCES↗
Water for electricity in India: A multi-model study of future challenges and linkages to climate change mitigation
This paper provides projections of water withdrawals and consumption for electricity generation in India through 2050. Based on the results from five energy-economic modeling teams, the paper explores the implications of economic growth, power plant cooling policies, and electricity CO2 emissions reductions on water withdrawals and consumption. To isolate modeling differences, the five teams used harmonized assumptions regarding economic and population growth, the distribution of power plants by cooling technologies, and withdrawals and consumption intensities. The results demonstrate the different but potentially complementary implications of cooling technology policies and efforts to reduce CO2 emissions. The application of closed-loop cooling technologies substantially reduces water withdrawals but increases consumption. The water implications of CO2 emissions reductions, depend critically on the approach to these reductions. Focusing on wind and solar power reduces consumption and withdrawals; a focus on nuclear power increases both; and a focus on hydroelectric power could increase consumptive losses through evaporation.
electricity generation↗
Atmospheric Corrosion Behavior and Mechanism of a Ni-Advanced Weathering Steel in Simulated Tropical Marine Environment
Corrosion behavior of Ni-advanced weathering steel, as well as carbon steel and conventional weathering steel, in a simulated tropical marine atmosphere was studied by field exposure and indoor simulation tests. Meanwhile, morphology and composition of corrosion products formed on the exposed steels were surveyed through scanning electron microscopy, energy-dispersive x-ray spectroscopy and x-ray diffraction. Results indicated that the additive Ni in weathering steel played an important role during the corrosion process, which took part in the formation of corrosion products, enriched in the inner rust layer and promoted the transformation from loose γ-FeOOH to dense α-FeOOH. As a result, the main aggressive ion, i.e., Cl{sup −}, was effectively separated in the outer rust layer which leads to the lowest corrosion rate among these tested steels. Thus, the resistance of Ni-advanced weathering steel to atmospheric corrosion was significantly improved in a simulated tropical marine environment.
36 MATERIALS SCIENCE↗
Sub genome anchored physical frameworks of the allotetraploid Upland cotton (Gossypium hirsutum L.) genome, and an approach toward reference-grade assemblies of polyploids
Like those of many agricultural crops, the cultivated cotton is an allotetraploid and has a large genome (~2.5 gigabase pairs). The two sub genomes, A and D, are highly similar but unequally sized and repeat-rich, which pose significant challenges for accurate genome reconstruction using standard approaches. Here we report the development of BAC libraries, sub genome specific physical maps, and a new-generation sequencing approach that will lead to a reference-grade genome assembly for Upland cotton. Three BAC libraries were constructed, fingerprinted, and integrated with BAC-end sequences (BES) to produce a de novo whole-genome physical map. The BAC map was partitioned by sub genomes through alignment to the diploid progenitor D-genome reference sequence with densely spaced BES anchor points and computational filtering. The physical maps were validated with FISH and genetic mapping of SNP markers derived from BES. Two pairs of homeologous chromosomes, A11/D11 and A12/D12, were used to assess multiplex sequencing approaches for completeness and scalability. The results represent the first sub genome anchored physical maps of Upland cotton, and a new-generation approach to the whole-genome sequencing, which will lead to the reference-grade assembly of allopolyploid cotton and serve as a general strategy for sequencing other polyploid species.
59 BASIC BIOLOGICAL SCIENCES↗
Raman scattering in single-crystal sapphire at elevated temperatures
Sapphire is a widely used high-temperature material and this work presents thorough characterization of all the measurable Raman scattering modes in sapphire and their temperature dependencies. Here, Raman scattering in bulk sapphire rods is measured from room temperature to 1081 °C and is illustrated as a method of noncontact temperature measurement. A single-line argon ion laser at 488 nm was used to excite the sapphire rods inside a cylindrical furnace. All the anti-Stokes peaks (or lines) were observable through the entire temperature range of interest, while Stokes peaks were observable until they were obscured by background thermal emission. Temperature measurements were found to be most reliable for A 1g and E g modes using the peaks at ±418, ±379, +578, +645, and, +750 cm -1 (+ and – are designated for Stokes and anti-Stokes peaks respectively). The 418 cm -1 peak was found to be the most intense peak. The temperature dependence of peak position, peak width, and peak area of the ±418 and ±379 peaks is presented. For +578, +645 and +750, the temperature dependence of peak position is presented. The peaks’ spectral positions provide the most precise temperature information within the experimental temperature range. Finally, the resultant temperature calibration curves are given, which indicate that sapphire can be used in high-temperature Raman thermometry with an accuracy of about 1.38°C average standard deviation over the entire >1000°C temperature range.
20 FOSSIL-FUELED POWER PLANTS↗
Three-phase short-circuit fault implementation in converter based transmission line emulator
A hardware test-bed (HTB) has been developed to realize power system emulation by mimicking the system components with universal three-phase voltage source converters (VSCs). The VSC-based transmission line emulator has also been successfully developed to flexibly represent interconnected ac lines under normal operating conditions. As the most serious short-circuit fault condition, the three-phase short-circuit fault emulation is essential for power system studies. This paper proposes a model to realize the three-phase short-circuit fault emulation within the emulated transmission line. At the same time, a combination method is proposed to eliminate the undesired transients caused by the current reference step changes while switching between the fault state and normal state.
Zhang, Shuoting↗