Engineering Papers⌕ Search

Engineering topics

Lindstrom, D. J.

Publications and source records attributed to Lindstrom, D. J..

35 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Geochemical and petrological sampling and studies at the first moon base

Strategic sampling appropriate to the first-order lunar base can advance a variety of first-order lunar geochemical and petrological problems. Field observation and collection of samples would be done on the lunar surface, but detailed analysis would be done mainly in terrestrial laboratories. Among the most important areas of investigation for which field observations can be made and samples can be collected at the initial base are regolith studies, studies of mare and highlands stratigraphy, and a search for rare materials such as mantle nodules. Since the range of exploration may be limited to a radius of about 20 km from the first lunar base, locating the base near a mare-highlands boundary would enable the greatest latitude in addressing these problems.

Haskin, L. A.↗
NASA NTRS1983

Antarctic meteorite ALHA81005 - Not just another lunar anorthositic norite

It is contended that 81005 requires the existence of a component that is poor in large-ion lithophile elements, at least as mafic as anorthositic norite, and magnesian rather than ferroan. While no such component has yet been observed in nearside samples, as an end-member in mixing models it would conveniently account for the composition of some polymict samples that heretofore have been difficult to explain as mixtures of endogenous rock types. The results presented here therefore suggest that the early lunar crust contained a significant proportion of both ferroan and magnesian anorthositic norites as primary igneous rocks. It is acknowledged that this conclusion is at variance with models that treat materials of anorthositic norite composition as mixtures of anorthosite plus norite, troctolite, and dunite.

Korotev, R. L.↗
NASA NTRS1983

Kinetic effects on trace element partitioning

A potential difficulty regarding the application of trace element abundance data to problems in igneous petrogenesis is related to the possibility that partitioning of trace elements among minerals and melt may not be an equilibrium process. It may rather be controlled by kinetic processes, specifically the interplay between crystal growth and diffusion of the trace elements in crystals and melt. The present investigation has the objective to quantify kinetic effects on trace element partitioning. Crystals of olivine, pyroxene, and plagioclase were grown rapidly from synthetic melts resembling naturally-occurring mafic melts and doped with La, Sm, and Lu to quantify the magnitude of the effect of crystal growth rate on concentration of excluded trace elements. Olivine melt partitioning failed to show any appreciable kinetic effects, while diopside/melt distribution coefficients increased by 70 percent when the crystals grew very rapidly.

Lindstrom, D. J.↗
NASA NTRS1982

An electrochemical study of Ni/2+/, Co/2+/, and Zn/2+/ ions in melts of composition CaMgSi2O6

Results are reported for a study of the behavior of Ni(2+), Co(2+), and Zn(2+) in molten diopside, determined by cyclic voltametry, as a first step in adapting electrochemical methods for use in experimental geochemistry. The techniques used are described, the theory is briefly discussed, and it is demonstrated that Ni(2+), Co(2+), and Zn(2+) can be reduced, then reoxidized in an uncomplicated case of reversible charge transfer at the Pt electrode. This implies that the neutral metal atoms remain undissolved in the melt. The kinetics of the reduction process, the effects of concentration, the standard reduction potentials, and the diffusion coefficients are discussed in detail. The observations are consistent with the mechanism of Ni(2+) diffusion by transport from site to site. As the proportion of SiO2 in the melt increases, a higher activation energy is required for Ni(2+) to move, and the rate of diffusion is lowered.

Semkow, K. W.↗
NASA NTRS1982

On compositional variations among lunar anorthosites

Ferroan anorthosite (FAN) is the most abundant 'pristine' highlands igneous rock in the Apollo sample collection. The presence of substantial FAN in the lunar crust is one argument used in favor of a global magma ocean on which crystallizing plagioclase could float. Information about the composition of the proposed magma ocean or whatever liquids might have been parental to FAN is sparse. As a first step toward learning about the nature of the FAN parent and the processes by which FAN attained its compositional characteristics, attention is given to the concentrations for a number of major and trace elements whose behavior during magmatic processes is somewhat understood. Serious difficulties are found with both FAN and the Marcy anorthosite in interpreting incompatible trace element concentrations in the plagioclases or the whole rocks in terms of residues from parent liquids. A description is presented of the nature of these difficulties.

Haskin, L. A.↗
NASA NTRS1981

Ni partitioning between diopside and silicate melt - A redetermination by ion microprobe and recognition of an experimental complication

The capabilities of and potential problems with ion microprobe analysis are illustrated in the determination of Ni distribution between silicate melt and diopside as a function of concentration. Samples of diopside and a melt in the albite-anorthite-diopside system were doped with Ni to levels of 5.22 and 1.08 wt % and 1060, 138, 42 and 30 ppm, and with 3 ppm of Ni-63, and characterized by both electron and ion microprobe techniques. Measurements of Ni-62 distribution by the ion probe method give a ratio of 1.87 for the ratio of count rates in the diopsides with the glass, which is slightly lower than the value of 2.05 obtained from beta-track mapping. The measurements required the secondary ion signal to be linear with concentration in the range measured, and a calibration to correct for differential secondary ion yields from different phases. It is found, however, that partition coefficients measured for Ni-58 and Ni-60 are not constant with Ni concentration, probably due to Ni migration during crystallization. The results thus show ion microprobe analyses to be feasible for simultaneous measurements of distributions of more than one element, and of elements inappropriate for beta-track mapping or electron probe analysis.

Steele, I. M.↗
NASA NTRS1979

Electrochemistry of lunar rocks

Electrolysis of silicate melts has been shown to be an effective means of producing metals from common silicate materials. No fluxing agents need be added to the melts. From solution in melts of diopside (CaMgSi2O6) composition, the elements Si, Ti, Ni, and Fe have been reduced to their metallic states. Platinum is a satisfactory anode material, but other cathode materials are needed. Electrolysis of compositional analogs of lunar rocks initially produces iron metal at the cathode and oxygen gas at the anode. Utilizing mainly heat and electricity which are readily available from sunlight, direct electrolysis is capable of producing useful metals from common feedstocks without the need for expendable chemicals. This simple process and the products obtained from it deserve further study for use in materials processing in space.

Lindstrom, D. J.↗
NASA NTRS1978

Partitioning of Ni/2+/ between basaltic and synthetic melts and olivines An experimental study

Olivine/liquid distribution coefficients for Ni in basaltic and simple synthetic melts are found in the 1400-1070 C temperature range. The results suggest that: (1) the Ni distribution coefficients and NiO activity coefficients are strongly temperature dependent, (2) the Ni distribution coefficients are functions of melt composition and structure at a constant temperature although the dependence is small for most basaltic magmas, (3) differences in melt composition do not significantly influence generally 'basaltic' melts, (4) the Ni distribution coefficients may be used as geothermometers to predict the olivine crystallization temperatures of basaltic magmas to within plus or minus 50 C, (5) the Ni distribution coefficients are greater than one at all natural magmatic temperatures, and (6) the Ni distribution coefficients do not significantly vary as functions of the Ni content of the melt to at least one mole percent.

Leeman, W. P.↗
NASA NTRS1978

Partitioning of transition metals between diopside and coexisting silicate liquids. I - Nickel, cobalt, and manganese

Distribution coefficients have been found for the partitioning of Ni, Co, and Mn between calcium-rich clinopyroxenes and coexisting silicate liquids. Values are found for the 1110-1360 C temperature range. The breakdown of Henry's Law was not observed. The measured clinopyroxene/liquid distribution coefficients ranged from 1.5-14.0 for Ni, 0.5-2.0 for Co, and 0.3-1.2 for Mn. Analyses of pyroxenes grown from charges differing in the amounts of transition metals indicate that Ni and Co occupy the M1 site of diopside and that Mn occupies the M1 and M2 sites. Equilibrium constants were found in terms of the activities of the components in the liquid and solid phases. These activities are based on the mole fractions. An activity/concentration model was used for the liquid phase in order to explain the variations in the clinopyroxene/liquid coefficients due to bulk composition.

Lindstrom, D. J.↗
NASA NTRS1977

The Apollo 17 'melt sheet' - Chemistry, age and Rb/Sr systematics

Major, minor, and trace-element compositions, age data, and Rb/Sr systematics of Apollo 17 boulders have been compiled, and additional analyses performed on a norite breccia clast (77215) included in the Apollo 17, Station 7 boulder. The Apollo 17 boulders are found to be identical or nearly so in major, minor, and trace-element composition, suggesting that they all originated as an impact melt analogous to melt sheets found in larger terrestrial craters. The matrix dates (Ar-40/Ar-39) and Rb/Sr systematics available suggest that this impact melt formed by a single impact about 4 billion years ago. This impact excavated, shocked, brecciated, and melted norites, norite cumulates, and possibly anorthositic gabbros and dunites about 4.4 billion years old. The impact was likely a major one, possibly the Serenitatis basin-forming event.

Winzer, S. R.↗
NASA NTRS1977

The petrology and geochemistry of impact melts, granulites, and hornfelses from consortium breccia 61175

The matrix and 58 clasts from breccia 61175 were analyzed for major, minor, and trace elements. The matrix is anorthositic and has lithophile trace element abundances 20 to 40 times chondrite. Clasts comprise impact melt rocks, xenocryst and xenolith-free very high aluminum (VHA) and anorthositic basalts, anorthosite, anorthosite-norite-troctolite granulites, and hornfelses. The VHA and anorthositic basalts are considered to be impact melts, and the hornfelses were probably formed by incorporation of breccias or preexisting melt rocks into a melt sheet prior to cooling. The range of melt-rock lithophile trace element abundances might indicate more than one melt sheet.

Winzer, S. R.↗
NASA NTRS1977

Geochemical studies of the White Breccia Boulders at North Ray Crater, Descartes region of the lunar highlands

The samples of the White Breccia Boulders obtained during the Apollo 16 mission and investigated in the reported study include an anorthositic breccia (67415), a dark matrix breccia (67435), a light matrix breccia (67455), and a large clast of dark matrix breccia (67475) taken from the 67455 boulder. The chemical analyses of bulk samples of the samples are listed in a table. A graph shows the lithophile trace element abundances. Another graph indicates the variation of Sm with Al2O3 content for samples from the White Breccia Boulders. The North Ray Crater breccias are found to be in general slightly more aluminous than breccias from the other stations at the Apollo 16 site. Analyses of eight Apollo 16 breccias cited in the literature range from 25% to 35% Al2O3. However, the North Ray Crater breccias are more clearly distinct from the other Apollo 16 breccias in their contents of lithophile trace elements.

Lindstrom, M. M.↗
NASA NTRS1976

The remarkable chemical uniformity of Apollo 16 layered deep drill core section 60002

Atomic absorption and colorimetric spectrophotometers were used to determine major- and minor-element abundances in 12 samples from layered section 60002 of the Apollo 16 deep drill core. It is suggested that gardening of a relatively thick local unit produced the layering in this section in such a manner that the proportions of materials of different compositions remained virtually unchanged.

Nava, D. F.↗
NASA NTRS1975

Lunar polymict breccia 14321 - A compositional study of its principal components

Forty-nine sub-samples of the polymict breccia 14321,184 have been excavated from the rock and analyzed by instrumental activation analysis techniques, specially modified to allow examination of small samples. Two distinct types of microbreccia clasts were analysed. A mare-type basalt of unusual composition is present as several discrete clasts. Mixing models for the clastic components of the breccia illustrate that at least three stages of assembly may be distinguished on compositional grounds. The first was at a site such that KREEP-rich materials dominated the clastic rocks formed, although a variety of lithic fragments were apparently present. The second assembly stage may have been primarily that of comminution and mixing of the more primitive materials, with addition of mare-type basalt clasts. The third stage saw addition of clasts of 14321-type basalt. In the final assembly stage, the light matrix was apparently formed entirely by mutual abrasion of the pre-existing clasts, resulting in little or no change in bulk composition.

Duncan, A. R.↗
NASA NTRS1972

Compositional characteristics of some Apollo 14 clastic materials.

Eighty-two subsamples of Apollo 14 materials have been analyzed by instrumental neutron activation analysis techniques for as many as 25 elements. In many cases, it was necessary to develop new procedures to allow analyses of small specimens. Compositional relationships among Apollo 14 materials indicate that there are small but systematic differences between regolith from the valley terrain and that from Cone Crater ejecta. Fragments from 1-2 mm size fractions of regolith samples may be divided into compositional classes, and the 'soil breccias' among them are very similar to valley soils. Multicomponent linear mixing models have been used as interpretive tools in dealing with data on regolith fractions and subsamples from breccia 14321. These mixing models show systematic compositional variations with inferred age for Apollo 14 clastic materials.

Lindstrom, M. M.↗