Engineering Papers⌕ Search

Engineering topics

Lindahl, John M.

Publications and source records attributed to Lindahl, John M..

At least 19 records

3D printable polymeric lightning strike protection system for fiber reinforced composites

The current embodiments include all-polymeric protective material for mitigating lightning strike damage. The protective material includes a hybrid matrix comprising PANI and MXene dispersed within a thermosetting epoxy resin. This hybrid matrix can be painted, printed, or applied as a conductive polymeric layer to a FRCP structure, for example an aircraft fuselage, wing, empennage, control surface (aileron, flap, slats, rudder, elevator) or a wind turbine blade. The protective material not only withstands lightning strikes, but also functions as shielding against electromagnetic interference and is corrosion-resistant and lightweight.

Kumar, Vipin↗

System and method for simulation-assisted additive manufacturing involving estimating anisotropic deformation

A simulation-assisted additive manufacturing system and method for generating an anisotropic compensation to account for non-uniform deformation due to additive manufacturing and service loading. The predicted deformation may not be fully defined. The present disclosure provides a system and method for estimating the missing deformation data through regression analysis. The present disclosure also provides an integrated framework where the various simulated-assisted design modules are configured for two-way communication and sharing access to changes to the model.

Kim, Seokpum↗

Penetrating and actuating nozzle for extrusion-based 3D printing

An apparatus and device for creating a vertical strengthening feature within a 3D printed article of manufacture for improving mechanical performance in the Z-direction. Fill material is deposited in voids vertically crossing multiple layers during the build of 3D printing. The device includes a penetrating extension that fits within the void to create a vertical strengthening feature via heat and/or extruded fill material. The size and/or movement of the heated extension can impact the void side walls to reflow the build material and blend the layers together within the void side walls.

Kunc, Vlastimil↗

System and method for additive manufacturing with toolpath bridges and resultant structure

A system and method for improving additive manufacturing, including additive manufacturing toolpaths, is provided. The system and method includes a toolpath generator that obtains initial toolpaths of an object, identifies isolated paths in the toolpaths, and adds bridge connections between neighboring isolated paths in each layer to improve the toolpaths. The bridge connections facilitate the continuous and non-stop deposition of each layer according to improved toolpaths during additive manufacture, which can reduce total deposition time and improve the resultant additive manufacture.

Kim, Seokpum↗

Long fiber injection molding

An improved method for obtaining high fiber volume fraction, long fiber injection molded articles is provided. According to one embodiment, the method includes forming an injection molding feedstock by cutting pre-impregnated fiber-reinforced tape into platelets. The platelets can be coated with a thin layer of polymer to allow sliding of the platelets with respect to each other at the early stages of plastication, rather than forcing relative motion of fibers with respect to each other. The method can further include the dispersion of material only in the final stages of the injection molding screw to promote gentle motion of the feedstock at the earlier stages of the plastication process. The method allows improvement of mechanical properties of articles manufactured with equipment and techniques that are prevalent in high volume automotive and consumer industries.

Kunc, Vlastimil↗

Large-scale reactive thermoset printing: Complex interactions between temperature evolution, viscosity, and cure shrinkage

Thermoset composites are strong candidates for large-scale material extrusion additive manufacturing (AM). However, uncured thermoset composites become unstable as print height increases. Here, chemical initiation of vinyl ester immediately before deposition was used to suppress collapse and enable large-scale thermoset printing. Structural stability was assessed by printing thin walls at various layer times and monitoring thermal gradients with an infrared camera. Stable printing was observed at a layer time of 4.50 min, approximately half the gel time of the material (8 min). Self-weight collapse occurred at short layer time (0.68 min), whereas warpage occurred at long layer time (6.50 min). Here, a new behavior was discovered at intermediate layer time (2.25 min) where the heat generated by the reaction causes new, un-gelled layers to flow. Forced convection eliminates this behavior, stabilizing the 2.25-min layer time print. These findings motivated development of a less exothermic material system, which was used to print a large-scale mold and demonstrate the value of this understanding. By presenting these challenges of large-scale reactive thermoset AM for the first time, this work motivates focused studies of the complex interplay between rheological, thermal, and chemical behaviors to improve the feasibility of large-scale thermoset AM. Tensile properties of the printed material were also measured. Longitudinal and transverse elastic moduli are 3.79 and 2.95 GPa, respectively, and corresponding tensile strengths are 36.11 and 18.83 MPa. The glass transition temperature is 93.13 °C.

36 MATERIALS SCIENCE↗

Rapid manufacturing of tailored preforms

A method for rapid manufacturing of three dimensional discontinuous fiber preforms is provided. The method includes the deposition of a polymeric material containing fibers on a surface to form a tailored charge for compression molding. The reinforced polymeric material may be a thermoplastic or a reactive polymer with viscosity low enough to allow flow through an orifice during deposition, yet high enough zero shear viscosity to retain the approximate shape of the deposited charge. The material can be deposited in a predetermined pattern to induce the desired mechanical properties through alignment of the fibers. This deposition can be performed in a single layer or in multiple layers. The alignment is achieved passively by shear alignment of the fibers or actively through fiber orientation control or mixing. The fibers can be of the desired material, length, and morphology, including short and long filaments.

Kunc, Vlastimil↗

Increased material flow throughput in large scale additive manufacturing through movable segmented build platform

An assembly for additive manufacturing includes a build housing including a base, a print head, and a print head support connected to the base for supporting the print head above the base. A driver system is provided for moving the print head and the base relative to one another. A build platform comprising a build support and at least one platen. The build support can be detachably engageable to the housing. The platens can be detachably engageable to the build support. The build support can include registration structure for registering the position of the build support relative to the build housing. A method of additive manufacturing is also disclosed.

Kunc, Vlastimil↗

Self-sensing of printed polymer structures

A structural health monitoring method is provided that utilizes self-sensing printed polymer structures. The method is based on resistivity properties of conductive materials, which can be integrated to a 3D printed polymer structure during additive manufacturing. An article to be monitored has at least one 3D printed polymer structure including a circuit comprising at least one conductive pathway extending through a non-conductive material. The resistance across the circuit is measured during or after loading of the article to determine a resistance value. The measured resistance value is compared to a known resistance value, and based on the comparison, a defect can be detected in the 3D printed polymer structure. Structural health monitoring systems and articles with integrated structural health monitoring are also provided.

Kunc, Vlastimil↗

Method for printing low-density polymer structures

A method of forming a low-density three-dimensional article is provided. The method includes printing a low-density composition on a substrate to form at least one layer comprising the low-density composition. The low-density composition includes a (P) polymer component and (M) a microsphere component in a ratio by volume (P):(M). The method also includes selectively controlling a density of the low-density composition during printing to give the at least one layer on the substrate. Selectively controlling the density of the low-density composition includes varying the ratio (P):(M) during printing. The method further includes repeating the printing and selectively controlling the density of the low-density composition to form additional layer(s), thereby forming the low-density three-dimensional article. A low-density three-dimensional article prepared in accordance with the method is also provided.

Kunc, Vlastimil↗

Utility of Big Area Additive Manufacturing for Part Production for Low-Head Hydropower (CRADA NFE-18-07280 Final Report)

ORNL worked with Cadens, LLC, to explore the use of additive manufacturing (AM) to produce low-cost parts for low-head hydropower systems. Cadens develops design optimization software that leverages the flexible, low-cost, high-strength benefits of AM and composite materials. Cadens also operates a micro-hydro lab to test AM components in controlled environments. Until now, Cadens’ tests have been limited to components of a size that they can cost-effectively manufacture using local commercial systems. This project provided an opportunity for Cadens to scale up their modular AM hydropower parts using the capabilities of Big Area Additive Manufacturing (BAAM). This project was a success and resulted in the design and fabrication of several end-use parts of a hydropower system, using a Big Area Additive Manufacturing (BAAM) system. The fabricated parts include a draft tube, thimble, runner housing mold, PVC end fitting and two PVC pipe supports. In addition, a runner system was fabricated using fused deposition modeling on a 3D Platform Workbench 400 Series System.

13 HYDRO ENERGY↗

Factors affecting direct lightning strike damage to fiber reinforced composites: A review

In recent years, Carbon Fiber Reinforced Plastics (CFRP) or Glass Fiber Reinforced Plastics (GFRPs) have become a very common material for aircraft and wind turbine structures. These structures are often protected from lightning strikes using conventional metal-based protective films/foils. Non-conventional, non-metallic lightning strike protection (LSP) technologies have not yet been fully realized, but research on non-conventional LSP systems for CFRPs has gained momentum in the last few years. The discovery of new structural conductive materials and improvements in the processing of carbon nano-filler based composites have challenged the conventional metal-based LSP systems by providing the potential for lightweight, non-metallic alternatives. However, a major challenge in using non-conventional LSP is the complex nature of a lightning strike event and its complicated thermal and mechanical impact on CFRP structures. Understanding the direct effect of a lightning strike on a CFRP structure requires understanding multiple transient loads, such as electrical, thermal, magnetic, acoustics, shock, and inertia. This review article focuses on new findings and discusses the complex direct effects of lightning on CFRPs. Specifically, the focus is to find the important factors that regulate and control the damage to FRPs are classified and discussed with the help of available literature based on experimental results. Finally, possibilities and limitations to these new findings are discussed.

36 MATERIALS SCIENCE↗

Vinylester and Polyester 3D Printing (CRADA NFE-17-06792 Final Report)

In Phase 2 of the technical collaboration between Oak Ridge National Laboratory (ORNL) and Polynt Composites USA, a vinyl ester composite material for extrusion deposition additive manufacturing (AM) of thermoset materials was developed, characterized, and functionality demonstrated. Through this work modeling capability was developed to determine the desired in use material characteristics and refined process parameters. Coupon level testing was performed to validate the end use functionality of printed structures. Finally, the material was printed to evaluate its performance in composites tooling applications. This combined effort led to a commercial product, PRD-1520, for Polynt Composites USA specifically designed for large-scale extrusion deposition additive manufacturing of thermoset materials.

36 MATERIALS SCIENCE↗

Vinylester and Polyester 3D Printing

ORNL collaborated with Polynt Composites USA to evaluate the feasibility of vinylester and polyester 3D printing. Multiple materials were tested and evaluated. The evaluation consisted of rheology measurements, print trials and mechanical testing. Significant effort was devoted to safe handling of large quantities of these materials. The feasibility of using vinylester and polyester materials for large scale 3D printing has been demonstrated with outstanding issues identified in this report.

36 MATERIALS SCIENCE↗

What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers

This paper presents a practical model for evaluating polymer feedstock materials as candidates for 3D printing across a variety of extrusion-based platforms. In order for a material to be successfully utilized for 3D printing operations, a series of fundamental conditions must be met. First, pressure-driven extrusion must occur through a given diameter nozzle at a specified flow rate. Second, the extruded material must form and sustain the desired shape. Third, the extruded structure must be able to bridge a specified gap and serve as a mechanically sound foundation for successive deposits. Finally, the deposited structure must be dimensionally stable during the transition to the final state (i.e. fully cured at room temperature). This article presents a framework for extrusion-based printing and a simple viscoelastic model for each of these conditions based on the rheological and thermo-physical properties of the candidate material and the processing parameters of the extrusion-based deposition platform. The model is demonstrated to be a useful tool for the evaluation of example test cases including: high temperature thermoplastics (polyphenylsulfone), fiber reinforced thermoplastics (acrylonitrile butadiene styrene), low-viscosity thermosets (epoxy resins), and thermoplastics with a high coefficient of thermal expansion (polypropylene).

36 MATERIALS SCIENCE↗

Additive Manufacturing of Polyurethane Materials

ORNL worked with The DOW Chemical Company to validate the feasibility of 3D printing DOW’s polyurethane (PU) materials using ORNL’s equipment and know-how. This led to the development of the first directly-3D-printable PU material.

36 MATERIALS SCIENCE↗

The Development of High Temperature Thermoplastic Composite Materials for Additive Manufactured Autoclave Tooling

In this work, ORNL and Techmer investigated and screened different high temperature thermoplastic reinforced materials to fabricate composite molds for autoclave processes using Additive Manufacturing (AM) techniques. This project directly led to the development and commercial release of two printable, high temperature composite materials available through Techmer PM. These new materials are targeted for high temperature tooling made via large scale additive manufacturing.

36 MATERIALS SCIENCE↗