Engineering topics

Lin, Yulin

Publications and source records attributed to Lin, Yulin.

23 records · Page 2

DOE OSTI2021

Intermediate Sr 2 Co 1.5 Fe 0.5 O 6-δ Tetragonal Structure between Perovskite and Brownmillerite as a Model Catalyst with Layered Oxygen Deficiency for Enhanced Electrochemical Water Oxidation

The generation of hydrogen in an environmentally benign way is highly essential to meet future energy demands. However, in the process of splitting water electrochemically, sluggish kinetics of the oxygen evolution reaction (OER) curtails its applicability, as it drags energy input. Herein, we synthesized SrCo-Fe-O oxides to optimize their OER activity by varying the Co/Fe ratio. Among them, Sr 2 Co 1.5 Fe 0.5 O 6-δ exhibited the best OER catalytic activity in the series, with an overpotential of 318 mV at 10 mA cm -2 and Tafel slope of 44.8 mV dec -1 . High-resolution neutron powder diffraction analysis identified an intermediate structure between the perovskite and brownmillerite, with alternating layers of disorderly orientated oxygen-deficient tetrahedra and fully stoichiometric octahedra. The unique stacking of tetrahedral and octahedral units facilitates desired interactions between the electrode surface and electrolyte. Theoretical calculations revealed that increased covalency of Co 3d and O 2p in Sr 2 Co 1.5 Fe 0.5 O 6-δ oxide is another primary contributor to its augmented water oxidation ability. As a model for developing catalysts with such an intermediate structure, the synergetic effect of oxygen vacancy and hybridization between Co 3d and O 2p assured the Sr 2 Co 1.5 Fe 0.5 O 6-δ oxide as a better catalyst for its enhanced OER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Two-dimensional superconductivity and anisotropic transport at KTaO 3 (111) interfaces

The distinctive electronic structure found at interfaces between materials can allow unconventional quantum states to emerge. Here we report on the discovery of superconductivity in electron gases formed at interfaces between (111)-oriented KTaO 3 and insulating overlayers of either EuO or LaAlO 3 . The superconducting transition temperature, as high as 2.2 kelvin, is about one order of magnitude higher than that of the LaAlO 3 /SrTiO 3 system. Notably, similar electron gases at KTaO 3 (001) interfaces remain normal down to 25 millikelvin. The critical field and current-voltage measurements indicate that the superconductivity is two-dimensional. In EuO/KTaO 3 (111) samples, a spontaneous in-plane transport anisotropy is observed before the onset of superconductivity, suggesting the emergence of a distinct “stripe”-like phase, which is also revealed near the critical field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Dopant site-dependent luminescence from rare-earth doped dibarium octafluorohafnate Ba 2 HfF 8 nanocubes for radiation detection

Development of new host materials containing heavy elements for radiation detection is highly desirable. In this work, dibarium octafluorohafnate, Ba 2 HfF 8 , doped with rare-earth ions, was synthesized as cube-shaped nanocrystals via a facile hydrothermal method. The host lattice contains two Ba 2+ crystallographic sites, and dopants on these sites exhibit site-dependent photoluminescence (PL), cathodoluminescence (CL) and X-ray excited radioluminescence (RL) characteristics. Single doping contents were optimized as 25 mol% Tb 3+ and 5 mol% Eu 3+ . In Ba 2 HfF 8 :Tb 3+ –Eu 3+ codoped nanocrystals, preferrable occupation of Eu 3+ and Tb 3+ at two different Ba 2+ sites in the host lattice was observed. The nanocubes exhibited enhanced emissions over micron sized particles. In PL, the presence of Tb3+ ions significantly enhanced the emission intensity of Eu 3+ ions due to energy transfer from the Tb 3+ to Eu 3+ ions, while under high-energy irradiation in CL or RL, Tb 3+ emission was intensified. X-ray induced RL with afterglow in seconds was observed. Finally, it was found that the codoped sample showed higher sensitivity than the singly doped sample, indicating that codoping is an effective strategy to develop a scintillator with this host structure for high-energy radiation detection.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2020

Size- and concentration-dependent Eu 2+ /Eu 3+ mixed luminescent characteristics of rare-earth-doped CaF 2 nanoparticles and their monolithic epoxy nanocomposites

CaF 2 is a promising luminescent host material for a wide range of applications, due to its high transparency, non-hygroscopy, low refractive index, low density, low backscattering efficiency, and abundance in nature. Here we report the photoluminescence (PL) and cathodoluminescence (CL) characteristics of rare-earth-doped CaF 2 nanoparticles and their composite monoliths with epoxy with visible emissions. The CaF 2 nanoparticles of ca. 36, 108 and 305 nm were prepared by a facile solution-mixing process and subsequent hydrothermal treatment. As the particle size decreases, the luminescence intensity increases for single-doped particles, while oppositely decreases for codoped particles because of energy transfer. Further, Eu 2+ - and Tb 3+ -codoped CaF 2 nanoparticles exhibit red emission, providing an efficient path for red emission through an energy transfer by Tb 3+ bridging without direct Eu 3+ doping. The effects of size and concentration are found to be pronounced in CL than PL, as the charge transfer between Eu 2+ and Eu 3+ reduces the concentration quenching in CL. The luminescence emission characteristics of epoxy/CaF 2 monoliths are different from those of particles due to the interactions with the epoxy molecules, and thus the energy transfer is hindered in PL while not in CL, enabling them for high-energy irradiation applications.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Burning magnesium in carbon dioxide for highly effective phosphate removal

Magnesium oxide was found to have high-phosphate-affinity as an effective component to enhance the phosphate removal ability of common adsorbent materials. However, the currently prepared MgO-based hybrid adsorbents by conventional methods still suffer from the limited low loading of MgO and inferior removal performances, much far away from practical application. In this study, an ingenious carbon coated MgO nanocomposite is designed by directly burning magnesium in CO 2 , a well-known textbook reaction. X-ray diffraction analysis, scanning electron microscope and aberration-corrected high-resolution transmission electron microscope demonstrate the sample is well prepared. Consequently, the high content of nanosized MgO combined with defect-rich carbon layer brings unprecedented phosphate removal capacity of 1135.0 mg/g, removal rate of 99% and benign compatibility with coexisting anions and solution pH. Furthermore, the removal mechanism is also investigated in detail by characterizing the sample before and after adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗