Engineering Papers⌕ Search

Engineering topics

Lin, Yi

Publications and source records attributed to Lin, Yi.

49 records · Page 3

Method for exfoliation of hexagonal boron nitride

A new method is disclosed for the exfoliation of hexagonal boron nitride into mono- and few-layered nanosheets (or nanoplatelets, nanomesh, nanoribbons). The method does not necessarily require high temperature or vacuum, but uses commercially available h-BN powders (or those derived from these materials, bulk crystals) and only requires wet chemical processing. The method is facile, cost efficient, and scalable. The resultant exfoliated h-BN is dispersible in an organic solvent or water thus amenable for solution processing for unique microelectronic or composite applications.

Lin, Yi↗

Electronic and optical properties of TiCoSb under different pressures

The electronic structure and optical properties of TiCoSb are studied by the first-principles calculation. It is found that the band gaps increase with the pressure increasing. It is noted that the increase of the band gap is due to the electrons of Ti 3d and Co 3d of the valence band (VB) shifting away from the Fermi level. Our calculation indicates that TiCoSb has the large density of state near the Fermi level; moreover, the changes of the density of states near the Fermi level mainly are caused by Ti 3d and Co 3d under the different pressures. It is noted that the absorption edge increases with an increase of pressure. As pressure increases, the static dielectric constants {epsilon}{sub 1}(0) decrease. All peaks of the imaginary part of the dielectric function {epsilon}{sub 2}({omega}) move towards higher energies within increasing pressure. - Graphical abstract: The first peak positions of the absorption spectrum increase and shift the high energy with an increase of pressure. The buleshift of the absorption edge could be observed. Highlights: Black-Right-Pointing-Pointer It is noted that the increase of the band gap is due to the electrons of Ti 3d and Co 3d of VB moving away from the Fermi level. Black-Right-Pointing-Pointer It is noted that the absorption edge increases with an increase of pressure. Black-Right-Pointing-Pointer As pressure increases, the static dielectric constant {epsilon}{sub 1}(0) decreases. Black-Right-Pointing-Pointer All peaks of the imaginary part of the dielectric function {epsilon}{sub 2}({omega}) move to wards higher energies within creasing pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueously Dispersed Silver Nanoparticle-Decorated Boron Nitride Nanosheets for Reusable, Thermal Oxidation-Resistant Surface Enhanced Raman Spectroscopy (SERS) Devices

The impurity-free aqueous dispersions of boron nitride nanosheets (BNNS) allowed the facile preparation of silver (Ag) nanoparticle-decorated BNNS by chemical reduction of an Ag salt with hydrazine in the presence of BNNS. The resultant Ag-BNNS nanohybrids remained dispersed in water, allowing convenient subsequent solution processing. By using substrate transfer techniques, Ag-BNNS nanohybrid thin film coatings on quartz substrates were prepared and evaluated as reusable surface enhanced Raman spectroscopy (SERS) sensors that were robust against repeated solvent washing. In addition, because of the unique thermal oxidation-resistant properties of the BNNS, the sensor devices may be readily recycled by short-duration high temperature air oxidation to remove residual analyte molecules in repeated runs. The limiting factor associated with the thermal oxidation recycling process was the Ostwald ripening effect of Ag nanostructures.

Lin, Yi↗

In Situ Mechanical Property Measurements of Amorphous Carbon-Boron Nitride Nanotube Nanostructures

To understand the mechanical properties of amorphous carbon (a-C)/boron nitride nanotube (BNNT) nanostructures, in situ mechanical tests are conducted inside a transmission electron microscope equipped with an integrated atomic force microscope system. The nanotube structure is modified with amorphous carbon deposited by controlled electron beam irradiation. We demonstrate multiple in situ tensile, compressive, and lap shear tests with a-C/BNNT hybrid nanostructures. The tensile strength of the a-C/BNNT hybrid nanostructure is 5.29 GPa with about 90 vol% of a-C. The tensile strength and strain of the end-to-end joint structure with a-C welding is 0.8 GPa and 5.2% whereas the lap shear strength of the side-by-side joint structure with a-C is 0.25 GPa.

Kim, Jae-Woo↗

The splitted laser beam filamentation in interaction of laser and an exponential decay inhomogeneous underdense plasma

The splitted beam filamentation in interaction of laser and an exponential decay inhomogeneous underdense plasma is investigated. Based on Wentzel-Kramers-Brillouin (WKB) approximation and paraxial/nonparaxial ray theory, simulation results show that the steady beam width and single beam filamentation along the propagation distance in paraxial case is due to the influence of ponderomotive nonlinearity. In nonparaxial case, the influence of the off-axial of {alpha}{sub 00} and {alpha}{sub 02} (the departure of the beam from the Gaussian nature) and S{sub 02} (the departure from the spherical nature) results in more complicated ponderomotive nonlinearity and changing of the channel density and refractive index, which led to the formation of two/three splitted beam filamentation and the self-distortion of beam width. In addition, influence of several parameters on two/three splitted beam filamentation is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation and Evaluation of Lunar Dust Adhesion Mitigating Materials

Particulate contamination is of concern in a variety of environments. This issue is especially important in confined spaces with highly controlled atmospheres such as space exploration vehicles involved in extraterrestrial surface missions. Lunar dust was a significant challenge for the Apollo astronauts and will be of greater concern for longer duration, future missions. Passive mitigation strategies, those not requiring external energy, may decrease some of these concerns, and have been investigated in this work. A myriad of approaches to modify the surface chemistry and topography of a variety of substrates was investigated. These involved generation of novel materials, photolithographic techniques, and other template approaches. Additionally, single particle and multiple particle methods to quantitatively evaluate the particle-substrate adhesion interactions were developed.

Wohl, Christopher J.↗

Self-similar solitary wave family in Bessel lattice

We focus on the formation and propagation of self-similar solitary wave family in Kerr nonlinear media with external Bessel lattice. A novel analytical solitary wave solution to (3+1)-dimensional Gross-Pitaevskii equation with varying coefficients and an external potential is obtained. The components of solitary wave family are differentiated by three quantum parameters. The properties and the stability of the solitary wave family are discussed in detail.

97 MATHEMATICS AND COMPUTING↗

Copoly(imide siloxane) Abhesive Materials with Varied Siloxane Oligomer Length

In this work, low surface energy copoly(imide siloxane)s were synthesized with various siloxane segment lengths. Characterization of these materials revealed that domain formation of the low surface energy component within the matrix was more prevalent for longer siloxane segments as indicated by increased opacity, decreased mechanical properties, and variation of the Tg. Incorporation of siloxanes lowered the polymer s surface energy as indicated by water contact angle values. Topographical modification of these materials by laser ablation patterning further reduced the surface energy, even generating superhydrophobic surfaces. Combined, the contact angle data and particle adhesion testing indicated that copoly(imide siloxane) materials may provide greater mitigation to particulate adhesion than polyimide materials alone. These enhanced surface properties for abhesive applications did result in a reduction of the tensile moduli of the copolymers. It is possible that lower siloxane loading levels would result in retention of the mechanical properties of the polyimide while still affording abhesive surface properties. This hypothesis is currently being investigated. Laser ablation patterning offers further reduction in particle retention as the available surface area for particle adhesion is reduced. Pattern variation and size dependencies are currently being evaluated. For the purposes of lunar dust adhesion mitigation, it is likely that this approach, termed passive due to the lack of input from an external energy source, would not be sufficient to mitigate surface contamination or clean contaminated surfaces for some lunar applications. It is feasible to combine these materials with active mitigation strategies - methods that utilize input from external energy sources - would broaden the applicability of such materials for abhesive purposes. Collaborative efforts along these lines have been initiated with researchers at NASA Kennedy Space Center where experiments are being conducted involving a series of embedded electrodes within polymeric matrices.

Wohl, Christoper J.↗

Self-similar solitary waves in Bessel optical lattices

An analytical solitary wave solution to the generalized nonlinear Schroedinger equation (NLSE) with varying coefficients in Bessel optical lattices is obtained based on the self-similar method. Our results indicate that a new family of Bessel (BSL) self-similar spatial solitons can be formed in the Kerr nonlinear media in the confined cylindrical symmetric geometry in sizes. These soliton profiles are rather stable, independent of propagation distance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mercury capture from flue gas using palladium nanoparticle-decorated substrates as injected sorbent

Although the Clean Air Mercury Rule (CAMR) was recently vacated by the District of Columbia Court of Appeals, efficient mercury (Hg) capture is still an important topic for the coal-fired power plant industry. Several states have Hg emission regulations that are even more stringent than CAMR guidelines. All coals contain Hg, which is released during combustion. Significant research efforts have been made to capture this toxic element before it is released to the atmosphere where it can stay suspended and travel for great distances. A variety of approaches have been examined, among which the injection of sorbent materials such as powdered activated carbon (PAC) is the current method of choice. The work presented here examined the mercury capture capability of various carbon substrates decorated with metal nanoparticles when injected as sorbents. Sorbent injections were carried out in a Hg in air mixture for laboratory-scale screening and in a real flue gas at a coal-fired power plant. It was found that palladium-decorated carbon substrates showed excellent mercury capture capabilities, with total efficiencies greater than 90% in laboratory-scale tests. In the real flue gas, the total efficiency was on the order of 60%, comparable to the benchmark commercial sorbent Darco Hg-LH, a brominated PAC, although the tested adsorbents had much lower surface areas. The results of this study are presented herein. Novel mercury capture from a coal-fired flue gas was achieved using carbon substrates decorated with palladium nanoparticles. 15 refs., 7 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Various kinds of spatial solitons associated with photoisomerization

It is predicted that the fundamental spatial solitons, namely bright, dark, and gray solitons associated with photoisomerization, can be formed stably except for antidark solitons. The soliton solutions and the relative properties of these solitons are given in detail. Incoherently coupled bright-dark soliton pairs are also investigated. Both the cases indicate that although the formation of a spontaneous bright soliton based on photoisomerization is impossible, it is, however, possible to form a bright soliton with the joining of a background light or the coupling of another dark soliton. The results provide possible methods of controlling a light with another light.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Berezinskii-Kosterlitz-Thouless phase transition for the dilute planar rotator model on a triangular lattice

The Berezinskii-Kosterlitz-Thouless (BKT) phase transition for the dilute planar rotator model on a triangular lattice is studied by using a hybrid Monte Carlo method. The phase-transition temperatures for different nonmagnetic impurity densities are obtained by three approaches: finite-size scaling of plane magnetic susceptibility, helicity modulus, and Binder's fourth cumulant. It is found that the phase-transition temperature decreases with increasing impurity density {rho} and the BKT phase transition vanishes when the magnetic occupancy falls to the site percolation threshold: 1-{rho}{sub c}=p{sub c}=0.5.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of Metal Nanoparticle-decorated Carbon Nanotubes under Ambient Conditions

This viewgraph presentation reviews the production of Metal Nanoparticle-decorated carbon Nanotubes. Multi-walled carbon nanotubes (MWCNTs) were efficiently decorated with metal nanoparticles (e.g. Ag, Pt, etc.) using the corresponding metal acetate in a simple mixing process without the need of chemical reagents or further processing. The conversion of acetate compounds to the corresponding metal reached over 90%, forming nanoparticles with average diameters less than 10 nm under certain conditions. The process was readily scalable allowing for the convenient preparation of multi-gram quantities of metal nanoparticle-decorated MWCNTs in a matter of a few minutes. These materials are under evaluation for a variety of electrical and catalytic applications. The preparation and characterization of these materials will be presented. The microscopic views of the processed MWCNTs are shown

Lin, Yi↗