Engineering Papers⌕ Search

Engineering topics

Lin, W.

Publications and source records attributed to Lin, W..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Pure spin current phenomena

Spintronic phenomena and devices have evolved from exploiting spin-polarized current to pure spin current. A pure spin current can more efficiently deliver spin angular momentum with fewer or no charge carriers, enabling spin–orbit torque switching in ferromagnets. The prospects of antiferromagnetic spintronics, especially electrical switching, remain perplexing and controversial. Here, we describe some recent advances, outstanding issues, challenges, and prospects of pure spin current.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Assessment of Precipitating Marine Stratocumulus Clouds in the E3SMv1 Atmosphere Model: A Case Study from the ARM MAGIC Field Campaign

This paper presents a process-oriented evaluation of precipitating stratocumulus and its transition to cumulus in version 1 of the Energy Exascale Earth System Model (E3SMv1) using comprehensive case-study observations from a field campaign of the Atmospheric Radiation Measurement program (ARM). The E3SMv1 single-column model (SCM) of the marine boundary layer and its low clouds and precipitation are compared to observations including subcloud drizzle retrievals from a combination of Doppler radar and lidar backscatter measurements. Additionally, the SCM is also compared to a large-eddy simulation (LES) of the same case. The combination of advanced remote sensing observations and LES is a powerful framework to evaluate the physical parameterizations of large-scale models. Given the observed large-scale environment, the E3SMv1 SCM realistically represents the evolution of clouds and boundary layer structure during the stratocumulus-to-cumulus transition. The model well simulates the liquid water path and its diurnal cycle in the stratocumulus period as well as the two-layer vertical thermodynamic structure and lower cloud fraction in the transition period. E3SMv1’s success in simulating the cloud in the stratocumulus period permitted examination of its precipitation processes. Here problems were identified with E3SMv1 producing an unrealistically small subcloud precipitation fraction, an unrealistic double peak in the vertical profiles of precipitation mass, and drizzle that evaporates too close to the surface. Further model diagnostics determined that these unrealistic characteristics resulted from an overly long microphysics time step and an unrealistic parameterization of the precipitation fraction. These results imply that careful consideration of these issues is needed in order to better simulate precipitation processes in marine stratocumulus.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Probing the neutron-proton asymmetry dependence of the nuclear source temperature with light charged particles

The dependence of the nuclear temperature on the source neutron-proton (N/Z) asymmetry was experimentally investigated with the light charged particles (LCPs) generated from thirteen reaction systems with different N/Z asymmetries, 64 Zn on 112 Sn and 70 Zn, 64 Ni on 112,124 Sn, 58,64 Ni, 197 Au, 232 Th at 40 MeV/u. A rather weak N/Z asymmetry dependence of the source temperature was qualitatively inferred from the extracted N/Z asymmetry dependence of the apparent temperature and that of the relative temperature change by the sequential decay effects with the help of the theoretical simulations. Comparing the present result with those from our previous work and other available experimental results, a weak N/Z asymmetry dependence of nuclear temperature is commonly observed in different independent experiments and with different thermometers, except for the result reported by McIntosh et al. [Phys. Lett. B 719, 337 (2013)]. Here, the origin of the difference between the conclusion of the former group and that of McIntosh et al. was addressed, using statistical multifragmentation model (SMM) simulations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

The Summertime Precipitation Bias in E3SM Atmosphere Model Version 1 over the Central United States

This study analyzes the summertime precipitation bias over the Central United States and its relationship to the simulated large-scale environment and the convection scheme in the Energy Exascale Earth System Model Atmosphere Model version 1. This relationship is mainly examined in a set of short-term hindcasts initialized with realistic large-scale conditions for the summer of 2011. Besides the uniform 1° model resolution, we adopt Regionally Refined Meshes to increase the model resolution to 0.25°over the contiguous United States. Additional five-year Atmospheric Model Intercomparison Project simulations are conducted to confirm that the results from the hindcasts are consistent with the climate runs. We find that the summertime dry precipitation bias over the Great Plains and the wet bias over the Rockies cannot be reduced simultaneously by changing resolution or tuning parameters. As for the diurnal cycle, Energy Exascale Earth System Model Atmosphere Model version 1 captures the general diurnal variation of the large-scale moisture transport and the large-scale upward motion over the Central United States. However, the diurnal cycle of precipitation over the Great Plains is out of phase with the diurnal variation of the large-scale environment because the convective precipitation dominates the total precipitation and its diurnal cycle, and it does not directly respond to the local moisture convergence and the large-scale upward motion. These results reemphasize the importance of improving the coupling of the convection to the large-scale environment in reducing the summer precipitation bias over the Central United States in climate models with the resolution of ~0.25°.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Solidarity of signal of measures for the liquid-gas phase transition in the statistical multifragmentation model

A systematic study of system size, N / Z asymmetry, and fragmenting volume effects as well as the Coulomb effect on experimental measures for the nuclear liquid-gas phase transition and the mechanism of phase transition are carried out in the framework of the statistical multifragmentation model (SMM). The measures examined here are the caloric curve, the specific heat capacity ( C v ), the multiplicity derivative (dM / dT), the moment parameters (M2 and γ2), the fluctuation of maximum fragment charge number (NVZ), the Fisher exponent (τ), and the Zipf's law parameter (ξ). A signal for the first-order phase transition for all the measures is observed. A stronger signal is observed in the system with smaller sizes or with more neutron rich or in smaller fragmenting volumes for the caloric curve, Cv, and dM/dT. The phase-transition temperatures are independent of the system size, N / Z asymmetry, fragmenting volume, and Coulomb force, which indicates these measures give a solid signal for the liquid-gas phase transition in SMM. On the other hand, the phase transition temperature and its behavior of the others slightly depend on the size, the N / Z asymmetry and the volume of the system. A negative heat capacity is observed for systems with A s ≥ 100 without the Coulomb force but disappears with the Coulomb. An instructive picture is given in the charge distributions for the observed first-order phase transition.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Experimental liquid-gas phase transition signals and reaction dynamics

The experimental liquid-gas phase transition signals are examined for the quasiprojectile (QP) reconstructed from the reactions of 40 Ar + 27 Al, 48 Ti, 58 Ni at 47 MeV/nucleon, using measures of caloric curve, multiplicity derivative, moment parameters, and fluctuation of maximum fragment charge number (NVZ). The QP source is reconstructed, using moving source parametrizations on an event-by-event basis. For the determination of the temperature, a quadrupole fluctuation thermometer is used. Deuterons are chosen for the thermometer to minimize the Coulomb and secondary sequential decay effects. Here, a new event-by-event method is proposed for the thermometer to determine the temperature. All measures show a characteristic signature around the temperature T = 9.0 ± 0.4 MeV, which may suggest that the QP system goes into the liquid-gas phase transition at T c = 8.3 ± 0.4 MeV after the Coulomb correction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2018

Evaluation of Multiple Doppler Retrievals of Convection in Darwin

Climate Model Development and Validation: (1) DOE's E3SM model being developed with goal of an increased resolution of 13 km (right arrow) assumptions made in convective parameterizations may not apply. (2) Need long term dataset with quantifiable large scale forcings to evaluate performance of convective parameterizations. (3) Vertical velocities are critical for calculating mass fluxes but are poorly represented in GCMs. (4) Dual Doppler techniques can retrieve vertical velocities, but uncertainties can be high due to sampling, mass continuity assumptions, fall speed assumptions, boundary conditions. (5) Can use high-resolution model simulated radar variables to assess impacts of such uncertainties

Doppler↗
DOE OSTI2018

Reexamination of a novel determination of density, temperature, and symmetry energy based on a modified Fisher model

Excited nuclei behave like liquid droplets and undergo phase transition at finite excitation temperatures; as proposed by M.E. Fisher in 1967 in order to describe the power law behavior of the “fragment” mass distribution around the critical point for a liquid-gas phase transition. In the early 1980s, the pioneering work of the Purdue group generated a novel classical droplet model based on the Fischer Model, which was the so-called Modified Fisher Model(MFM). In this article, a mistake in the formulation of the Modified Fisher Model (MFM) is addressed and corrected by reversing the sign of the mixing entropy term in the original formulation. The errors in the results of the previous MFM-related studies, such as isotopic yield distribution, isobaric yield ratios, isoscaling, m-scaling, self-consistent, determination of density, symmetry energy and temperature, and density and temperature determination related to the IMF Freeze out, are quantitatively analyzed. It is found that the errors originating from the mistake in sign of the mixing entropy term are generally small and even have no effect in some cases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Photoluminescence fatigue and inhomogeneous line broadening in semi-insulating Tl 6 SeI 4 single crystals

Photoluminescence (PL) properties of semi-insulating Tl 6 SeI 4 have been investigated. A broad emission band centered at 1.63 ± 0.02 eV was observed in all samples. The PL emission band is excitonic in nature and is tentatively attributed to a bound exciton emission. PL fatigue (a reduction in PL intensity under prolonged laser excitation) was always observed. The amount of PL fatigue depended on excitation power and temperature. PL fatigue kinetics are described by a stretched exponential with nominal lifetimes in the 10–265 s range. The recovery of the PL occurred within a few seconds of light cessation. The magnitude of PL fatigue in different samples correlated with inhomogeneous line broadening of the 1.63 eV emission band, such that broader bands exhibited more fatigue. An additional luminescence band centered at 1.78 eV was observed which increased in intensity under prolonged laser irradiation. The fatigue phenomenon is tentatively attributed to two mechanisms—the formation of photo-induced defects and the formation of quasi-stable particles. Both of these mechanisms introduce additional radiative and non-radiative recombination channels that lead to a decrease in the PL intensity under prolonged laser irradiation. Finally, since inhomogeneous line broadening and PL fatigue are related to the concentration of defects or impurities, the measurement of these two parameters is an effective method to screen sample quality.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Origins of large light induced voltage in magnetic tunnel junctions grown on semiconductor substrates

Recently, the study of interactions between electron spins and heat currents has given rise to the field of “Spin Caloritronics”. Experimental studies of these interactions have shown a possibility to combine the use of heat and light to power magnetic tunnel junction (MTJ) devices. Here we present a careful study of an MTJ device on Si substrate that can be powered entirely by light. We analyze the influence of the material properties, device geometry, and laser characteristics on the electric response of the sample. We demonstrate that by engineering the MTJ and its electrical contact, a large photovoltage reaching 100 mV can be generated. This voltage originates from the Si substrate and depends on the MTJ magnetic configuration. Finally, we discuss the origin of the photo-voltage in terms of Seebeck and photovoltaic effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗