Engineering Papers⌕ Search

Engineering topics

Lin, Shihong

Publications and source records attributed to Lin, Shihong.

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Extended Donnan-Manning theory for selective ion partition and transport in ion exchange membrane

The use of ion exchange membranes (IEMs) for electrochemical ion-ion separation leverages the selectivity of the IEMs toward like-charged species via valence difference and/or other ion membrane interactions. A mechanistic model that relates selectivity with membrane structural and chemical properties is lacking in the literature. Here, in this study, we extend the Manning’s counter-ion condensation model for describing ion partition and ion mobility inside IEMs to mixed salts scenarios. We evaluate the extended Donnan-Manning model against experimental data from literature and compare the performance the Donnan-Manning model to that of the ideal Donnan model and the Donnan-Affinity model. Our analysis shows that, despite its structural complexity, the Donnan-Manning model has less fitting parameters than the Donnan-Affinity model and generally outperforms the two other models in predicting counter-ion and co-ion partition. With the assumption of a higher mobility of condensed ions than that of uncondensed ions, the generalized Manning’s model can also predict counter-ion mobility selectivity for cation exchange membranes, but its performance for predicting mobility selectivity for anion exchange membranes is still unsatisfactory.

42 ENGINEERING↗
DOE OSTI2023

Experimental investigation of a reverse osmosis desalination system directly powered by wave energy

Powering desalination processes with renewable energy is a promising solution to address the global issue of water shortage with minimum carbon footprint and environmental impact. Here, we experimentally investigate a sustainable reverse osmosis (RO) desalination system directly powered by wave energy. In this system, seawater is pressurized and pumped to a RO desalination module via a piston pump directly driven by an oscillating surge wave energy converter (OSWEC). An accumulator is adopted on the feed inlet to mitigate the pressure fluctuations under time-varying ocean conditions. Meanwhile, a needle valve on the brine outlet is used to adjust the system pressure and water recovery. A 1:10 scaled model was designed, fabricated, and tested in a wave tank based on the Froude scaling law. Further, the optimal specific water productivity (SWP) obtained in the tank tests with 3.5 g/L feed salinity was 2.23m 3 /kWh, indicating a full-scale specific water productivity of 0.22m 3 /kWh for 35g/L seawater salinity. The influence of needle valve tuning on the specific water productivity was experimentally investigated and analyzed. Under a specific operational condition, tuning this valve improved specific water productivity by about 17% and reduced the system pressure by 24%, thereby avoiding extreme pressure and improving the system’s capability. This pilot study demonstrates that ocean wave energy is a promising source to sustainably power reverse osmosis desalination and provide freshwater water for coastal regions.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Exceptional Mineral Scaling Resistance from the Surface Gas Layer: Impacts of Surface Wetting Properties and the Gas Layer Charging Mechanism

Mineral scaling is a phenomenon that occurs on submerged surfaces in contact with saline solutions. In membrane desalination, heat exchangers, and marine structures, mineral scaling reduces process efficiency and eventually leads to process failure. Therefore, achieving long-term scaling resistance is beneficial to enhancing process performance and reducing operating and maintenance costs. While evidence shows that superhydrophobic surfaces may reduce mineral scaling kinetics, prolonged scaling resistance is limited due to the finite stability of the entrained gas layer present in a Cassie–Baxter wetting state. Additionally, superhydrophobic surfaces are not always feasible for all applications, but strategies for long-term scaling resistance with smooth or even hydrophilic surfaces are often overlooked. In this study, we elucidate the role of interfacial nanobubbles on the scaling kinetics of submerged surfaces of varied wetting properties, including those that do not entrain a gas layer. We show that both solution conditions and surface wetting properties that promote interfacial bubble formation enhances scaling resistance. In the absence of interfacial bubbles, scaling kinetics decrease as surface energy decreases, while the presence of bulk nanobubbles enhances the scaling resistance of the surface with any wetting property. The findings in this study allude to scaling mitigation strategies that are enabled by solution and surface properties that promote the formation and stability of interfacial gas layers and provide insights to surface and process design for greater scaling resistance.

calcite↗