Engineering Papers⌕ Search

Engineering topics

Liang, Y.

Publications and source records attributed to Liang, Y..

36 records · Page 2

Measurement of neutron and gamma-ray cross-correlation functions with 4 He detectors

For the first time, the neutron and gamma-ray time-dependent cross-correlation distributions from spontaneous fission and (α, n) neutron sources are measured with the 4 He fast neutron detectors. The pulse shape discrimination technique based on charge comparison is utilized to discriminate between neutrons and gamma-rays in the identification of the four possible correlated pairs: (γ, γ), (n, n), (γ, n), and (n, n). Both total and individual cross-correlation functions are obtained, and their shapes can be easily distinguished among different neutron sources. The (n, n) and (γ, n) correlations are selectively analyzed and the peak position of the (n, n) and (γ, n) pairs shows a linear correlation with source-detector distance. Here, the measurements illustrate the feasibility of using 4 He detectors to identify nuclear materials and their geometrical configurations, as well as other applications in nuclear nonproliferation and safeguards. In particular, the (n, n) correlated data can be very clearly assayed even in the presence of significant gamma fields without the use of shielding.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Study of MHD mode and cooling process during disruptions triggered by impurities injection in J-TEXT

The injection of a large amount of impurities is one of the possible ways of mitigating disruption in large-scale tokamaks. The deposition of impurities at the center of the plasma is the key to the radiation of plasma energy and suppression of runaway. The interaction of the gas jet with the rational surfaces has been studied by scanning the plasma current. The experimental results show that the injection of a massive amount of argon can cool the plasma from the edge to the core region, and the cooling process is accompanied by different magnetohydrodynamic (MHD) modes when the gas jet reaches the corresponding rational surfaces. It is observed that with different edge safety factors and electron density, gas injection can induce different poloidal modes at first. Then, the poloidal mode traverses to lower m (where m is the poloidal mode number) MHD activities until a 2/1 mode is initiated and a thermal quench is started. The experimental results show that the penetration of a gas jet across the rational surfaces is faster in the plasmas with pre-existing large 2/1 tearing modes, which indicates that the 2/1 mode plays an important role in the penetration process. Disruptions triggered by supersonic molecular beam injection display a slower cooling process compared with massive gas injection, which can be divided into four stages. The dominant poloidal mode transition from m = 3 to m = 2 is associated with electron temperature recovery.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Screening of resonant magnetic perturbation fields by poloidally varying toroidal plasma rotation

The angular frequency of the subsonic equilibrium toroidal flow in a tokamak plasma is typically assumed constant at magnetic flux surfaces, i.e., the rotation frequency does not vary along the poloidal angle of the flux surface. Yet, there are several cases where this symmetry is broken. An interesting situation is a recently observed complex flow pattern induced by magnetic field line ergodization, in the presence of the tri-dimensional (3-D) resonant magnetic perturbation (RMP) [Schmitz et al., Nucl. Fusion 56, 066008 (2016)]. A new flow model including poloidally varying rotation frequencies has been implemented in the full resistive linear MHD code MARS-F [Liu et al., Phys. Plasmas 7, 3681 (2000)], allowing poloidal variation of the angular frequency of the equilibrium toroidal rotation in a generic toroidal geometry. The effect of this asymmetric flow, on top of a poloidally symmetric toroidal flow, on the plasma response to RMP fields is numerically investigated. It is found that a poloidally varying toroidal flow component enhances the favourable average curvature induced plasma screening of the applied 3-D field, for low toroidal flow velocities. At faster flow, when the resistive-inertial response becomes important, the asymmetric toroidal flow reduces the plasma screening. The most significant effect is found to come from the m=1 component of the poloidal asymmetry in the toroidal rotation frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of the separated longitudinal structure function F L from hydrogen and deuterium targets at low Q 2

Structure functions, as measured in lepton-nucleon scattering, have proven to be very useful in studying the partonic dynamics within the nucleon. Furthermore, it is experimentally difficult to separately determine the longitudinal and transverse structure functions, and consequently there are substantially less data available in particular for the longitudinal structure function. Here, we present separated structure functions for hydrogen and deuterium at low four-momentum transfer squared, Q 2 < 1 GeV 2 , and compare them with parton distribution parametrization and k T factorization approaches. While differences are found, the parametrizations generally agree with the data, even at the very low-Q 2 scale of the data. The deuterium data show a smaller longitudinal structure function and a smaller ratio of longitudinal to transverse cross section, R, than the proton. This suggests either an unexpected difference in R for the proton and the neutron or a suppression of the gluonic distribution in nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evidence and modeling of 3D divertor footprint induced by lower hybrid waves on EAST with tungsten divertor operations

Here, three dimensional (3D) divertor particle flux footprints induced by the lower hybrid wave (LHW) have been systematically investigated in the EAST superconducting tokamak during the recent experimental campaign. We find that the striated particle flux (SPF) peaks away from the strike point (SP) closely fit the pitch of the edge magnetic field line for different safety factors q 95, as predicted by a field line tracing code taking into account the helical current filaments (HCFs) in the scrape-off-layer (SOL). As LHW power increases, it requires the fuelling to be increased e.g. by super molecular beam injection (SMBI), to maintain a similar plasma density, which may be attributed to the pump-out effect due to LHW, and may thus be beneficial for EAST steady state operations. The 3D SPF structure is observed with a LHW power threshold (P LHW ~ 0.9 MW). The ratio of the particle fluxes between SPF and outer strike point (OSP), i.e. ${{\Gamma }_{{\rm ion},{\rm SPF}}}/{{\Gamma }_{{\rm ion},{\rm OSP}}}$ , increases with the LHW power. Upon transition to divertor detachment, the particle flux at the main OSP decreases, as expected, however, the particle flux at SPF continues increasing, in contrast to the RMP-induced striations that vanish with increasing divertor density. In addition, we also find that the in–out asymmetry of the 3D particle flux footprint pattern exhibits a clear dependence on the toroidal field direction (B × ∇ B ↓ and B × ∇ B↑). Experiments using neon impurity seeding show a promising capability in 3D particle and heat flux control on EAST. LHW-induced particle and heat flux striations are also present in the H-mode plasmas, reducing the peak heat flux and erosion at the main strike point, thus facilitating long-pulse operation with a new steady-state H-mode over 60s being recently achieved in EAST.

3D effect↗

Optimization of the thrombin generation test components to measure potency of factor VIII concentrates

Introduction The thrombin generation test (TGT) is used both as a global haemostasis assay, and to compare activities of coagulation factor concentrates that have been spiked into patient plasma. However, TGT has not been systematically optimized to evaluate factor VIII (FVIII) product potency. Aims To improve the sensitivity of TGT to FVIII and allow a comparative analysis of the thrombin generating capacities of FVIII concentrates against reference preparations with known FVIII activity. Methods Concentrations of TGT components (analytical variables) were assessed to maximize the linearity and range of responses to the concentration of FVIII. Results We optimized the range and sensitivity of the TGT assay with respect to FVIII through the addition of FXIa to the assay. Other parameters that were adjusted, i.e. tissue factor (TF), procoagulant lipids and plasma concentrations, did not improve the ability of the assay to measure both high and very low levels of FVIII. In the optimized TF/FXIa‐activated TGT assay, all thrombin generation curve parameters were suitable for FVIII quantification, but thrombin peak height and maximal velocity demonstrated better linearity in the desired FVIII range. We found that the optimized TF/FXIa‐activated TGT has a wider range of sensitivity to FVIII than a commercially available TGT. Additionally, we demonstrated that the TF/FXIa‐activated assay performs adequately by comparing potency measurements of five commercially available FVIII products using TGT and traditional chromogenic and one‐stage clotting assays. Conclusions The optimized TGT assay can be used to quantify and compare the thrombin generating capacities of FVIII concentrates.

Jha, N. K.↗

The Q weak experimental apparatus

The Jefferson Lab Q weak experiment determined the weak charge of the proton by measuring the parity-violating elastic scattering asymmetry of longitudinally polarized electrons from an unpolarized liquid hydrogen target at small momentum transfer. A custom apparatus was created for this experiment to meet the technical challenges presented by the smallest and most precise e → p asymmetry ever measured. Technical milestones were achieved at Jefferson Lab in target power, beam current, beam helicity reversal rate, polarimetry, detected rates, and control of helicity-correlated beam properties. The experiment employed 180 μA of 89% longitudinally polarized electrons whose helicity was reversed 960 times per second. The electrons were accelerated to 1.16 GeV and directed to a beamline with extensive instrumentation to measure helicity-correlated beam properties that can induce false asymmetries. Møller and Compton polarimetry were used to measure the electron beam polarization to better than 1%. The electron beam was incident on a 34.4 cm liquid hydrogen target. After passing through a triple collimator system, scattered electrons between 5.8° and 11.6° were bent in the toroidal magnetic field of a resistive copper-coil magnet. The electrons inside this acceptance were focused onto eight fused silica Cherenkov detectors arrayed symmetrically around the beam axis. A total scattered electron rate of about 7 GHz was incident on the detector array. The detectors were read out in integrating mode by custom-built low-noise pre-amplifiers and 18-bit sampling ADC modules. The momentum transfer Q 2 =0.025 GeV 2 was observed using dedicated low-current ( ~ 100 pA ) measurements with a set of drift chambers before (and a set of drift chambers and trigger scintillation counters after) the toroidal magnet

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Competing Quantum Hall Phases in the Second Landau Level in Low Density Limit

Up to date, studies of the fractional quantum Hall effect (FQHE) states in the second Landau level have mainly been carried out in the high electron density regime, where the electron mobility is the highest. Only recently, with the advance of high quality low density MBE growth, experiments have been pushed to the low density regime [1], where the electron-electron interactions are strong and the Landau level mixing parameter, defined by κ = e 2 /εI B /ℏω e , is large. Here, l B = (ℏe/B) 1/2 is the magnetic length and ω c = eB/m the cyclotron frequency. All other parameters have their normal meanings. It has been shown that a large Landau level mixing effect strongly affects the electron physics in the second Landau level [2].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

BioMart Central Portal: an open database network for the biological community

BioMart Central Portal is a first of its kind, community-driven effort to provide unified access to dozens of biological databases spanning genomics, proteomics, model organisms, cancer data, ontology information and more. Anybody can contribute an independently maintained resource to the Central Portal, allowing it to be exposed to and shared with the research community, and linking it with the other resources in the portal. Users can take advantage of the common interface to quickly utilize different sources without learning a new system for each. The system also simplifies cross-database searches that might otherwise require several complicated steps. Several integrated tools streamline common tasks, such as converting between ID formats and retrieving sequences. The combination of a wide variety of databases, an easy-to-use interface, robust programmatic access and the array of tools make Central Portal a one-stop shop for biological data querying. Here, we describe the structure of Central Portal and show example queries to demonstrate its capabilities. Database URL: http://central.biomart.org.

59 BASIC BIOLOGICAL SCIENCES↗

Nuclear transparency and effective kaon-nucleon cross section from the A(e,e{sup '}K{sup +}) reaction

We have determined the transparency of the nuclear medium to kaons from A(e,e{sup '}K{sup +}) measurements on {sup 12}C, {sup 63}Cu, and {sup 197}Au targets. The measurements were performed at the Jefferson Laboratory and span a range in four-momentum-transfer squared Q{sup 2}=1.1-3.0 GeV{sup 2}. The nuclear transparency was defined as the ratio of measured kaon electroproduction cross sections with respect to deuterium ({sigma}{sup A}/{sigma}{sup D}). We further extracted the atomic number (A) dependence of the transparency as parametrized by T=(A/2){sup {alpha}-1} and, within a simple model assumption, the in-medium effective kaon-nucleon cross sections. The effective cross sections extracted from the electroproduction data were found to be smaller than the free cross sections determined from kaon-nucleon scattering experiments, and the parameter {alpha} was found to be significantly larger than those obtained from kaon-nucleus scattering. We have included similar comparisons between pion- and proton-nucleon effective cross sections as determined from electron-scattering experiments and pion-nucleus and proton-nucleus scattering data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental study of the A(e,e'{pi}{sup +}) reaction on {sup 1}H, {sup 2}H, {sup 12}C, {sup 27}Al, {sup 63}Cu and {sup 197}Au.

Cross sections for the {sup 1}H(e,e'{pi}{sup +})n process on {sup 1}H, {sup 2}H, {sup 12}C, {sup 27}Al, {sup 63}Cu, and {sup 197}Au targets were measured at the Thomas Jefferson National Accelerator Facility (Jefferson Lab) to extract nuclear transparencies. Data were taken from Q{sup 2}=1.1-4.7 GeV{sup 2} for a fixed center-of-mass energy of W=2.14 GeV. The ratio of {sigma}{sub L} and {sigma}{sub T} was extracted from the measured cross sections for {sup 1}H, {sup 2}H, {sup 12}C, and {sup 63}Cu targets at Q{sup 2}=2.15 and 4.0 GeV{sup 2}, allowing for additional studies of the reaction mechanism. In this article, we present the experimental setup and the analysis of the data in detail, including systematic uncertainty studies. Differential cross sections and nuclear transparencies as a function of the pion momentum at different values of Q{sup 2} are presented. Our results are consistent with the predicted early onset of color transparency in mesons. Global features of the data are discussed and the data are compared with model calculations for the {sup 1}H(e,e'{pi}{sup +})n reaction from nuclear targets.

43 PARTICLE ACCELERATORS↗

Applications of quark-hadron duality in the F{sub 2} structure function

Inclusive electron-proton and electron-deuteron inelastic cross sections have been measured at Jefferson Lab (JLab) in the resonance region, at large Bjorken x, up to 0.92, and four-momentum transfer squared Q{sup 2} up to 7.5 GeV{sup 2} in the experiment E00-116. These measurements are used to extend to larger x and Q{sup 2} precision, quantitative, studies of the phenomenon of quark-hadron duality. Our analysis confirms, both globally and locally, the apparent 'violation' of quark-hadron duality previously observed at a Q{sup 2} of 3.5 GeV{sup 2} when resonance data are compared to structure function data created from CTEQ6M and MRST2004 parton distribution functions (PDFs). More importantly, our new data show that this discrepancy saturates by Q{sup 2}{approx}4 GeV{sup 2}, becoming Q{sup 2} independent. This suggests only small violations of Q{sup 2} evolution by contributions from the higher-twist terms in the resonance region that is confirmed by our comparisons to ALEKHIN and ALLM97. We conclude that the unconstrained strength of the CTEQ6M and MRST2004 PDFs at large x is the major source of the disagreement between data and these parametrizations in the kinematic regime we study and that, in view of quark-hadron duality, properly averaged resonance region data could be used in global quantum chromodynamics fits to reduce PDF uncertainties at large x.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electroproduction of {eta} mesons in the S{sub 11}(1535) resonance region at high momentum transfer

The differential cross section for the process p(e,e{sup '}p){eta} has been measured at Q{sup 2}{approx}5.7 and 7.0(GeV/c){sup 2} for center-of-mass energies from threshold to 1.8 GeV, encompassing the S{sub 11}(1535) resonance, which dominates the channel. This is the highest momentum-transfer measurement of this exclusive process to date. The helicity-conserving transition amplitude A{sub 1/2}, for the production of the S{sub 11}(1535) resonance, is extracted from the data. Within the limited Q{sup 2} now measured, this quantity appears to begin scaling as Q{sup -3}--a predicted, but not definitive, signal of the dominance of perturbative QCD at Q{sup 2}{approx}5 (GeV/c){sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Overview of Results from the National Spherical Torus Experiment (NSTX)

The mission of NSTX is the demonstration of the physics basis required to extrapolate to the next steps for the spherical torus (ST), such as a plasma facing component test facility (NHTX) or an ST based component test facility (ST-CTF), and to support ITER. Key issues for the ST are transport, and steady state high β operation. To better understand electron transport, a new high-k scattering diagnostic was used extensively to investigate electron gyro-scale fluctuations with varying electron temperature gradient scale-length. Results from n = 3 braking studies are consistent with the flow shear dependence of ion transport. New results from electron Bernstein wave emission measurements from plasmas with lithium wall coating applied indicate transmission efficiencies near 70% in H-mode as a result of reduced collisionality. Improved coupling of High Harmonic Fast-Waves has been achieved by reducing the edge density relative to the critical density for surface wave coupling. In order to achieve high bootstrap current fraction, future ST designs envision running at very high elongation. Plasmas have been maintained on NSTX at very low internal inductance l i ~0.4 with strong shaping (κ ~ 2.7, δ ~ 0.8) with β N approaching the with-wall beta limit for several energy confinement times. By operating at lower collisionality in this regime, NSTX has achieved record non-inductive current drive fraction f NI ~71%. Instabilities driven by super-Alfv´enic ions will be an important issue for all burning plasmas, including ITER. Fast ions from NBI on NSTX are super-Alfv´enic. Linear TAE thresholds and appreciable fast-ion loss during multi-mode bursts are measured and these results are compared to theory. The impact of n > 1 error fields on stability is a important result for ITER. RWM/RFA feedback combined with n=3 error field control was used on NSTX to maintain plasma rotation with β above the no-wall limit. Other highlights are: results of lithium coating experiments, momentum confinement studies, scrape-off layer width scaling, demonstration of divertor heat load mitigation in strongly shaped plasmas, and coupling of CHI plasmas to OH ramp-up. These results advance the ST towards next step fusion energy devices such as NHTX and ST-CTF

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scaling study of the pion electroproduction cross sections

The {sup 1}H(e, e{sup '}{pi}{sup +})n cross section was measured for arange of four-momentum transfer up to Q{sup 2}=3.91 GeV{sup 2} at values of the invariant mass W above the resonance region. The Q{sup 2} dependence of the longitudinal component was found to be consistent with the Q{sup 2}-scaling prediction for hard exclusive processes. This suggests that the QCD factorization theorem is applicable at rather low values of Q{sup 2}. The transverse term falls off slower than the naive Q{sup -8} expectation and remains appreciable even at Q{sup 2}=3.91 GeV{sup 2}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗