Engineering Papers⌕ Search

Engineering topics

Liang, Kun

Publications and source records attributed to Liang, Kun.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Optimizing protic ionic liquid electrolyte for pre-intercalated Ti 3 C 2 T x MXene supercapacitor electrodes

Electrical double-layer capacitors (EDLCs) are of increasing importance in energy storage from renewable sources. The properties of the electrode and electrolyte materials influence the energy and power densities of EDLCs. We examined the specific capacitance and ion dynamics of a protic ionic liquid confined in pre-intercalated Ti 3 C 2 T x MXene. Our electrochemical measurements demonstrated that the creation of a protic ionic liquid, 1-butyl-3-H-imidazolium bis(trifluoromethanesulfonyl)imide (BuIMH-NTf2), using a mixture of ionic liquid, 1-butyl imidazole (BuIM), and salt, bis(trifluoromethanesulfonyl)imide (HNTf2), in a ratio of 0.8:0.2 led to the optimal capacitance. Remarkably, quasi-elastic neutron scattering measurements revealed increased particle mobility at this composition, attributed to the more efficient accumulation of BuIMH + on the electrode surface. This deposit of additional ions results in fewer BuIM molecules away from the surface, enhancing their mobility due to reduced crowding. This composition-dependent electrochemical behavior will guide the formulation of more efficient protic ionic liquid systems, enabling faster ion transport in energy storage devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nitrogen-Doped Graphene-Like Carbon Intercalated MXene Heterostructure Electrodes for Enhanced Sodium- and Lithium-Ion Storage

MXene is investigated as an electrode material for different energy storage systems due to layered structures and metal-like electrical conductivity. Experimental results show MXenes possess excellent cycling performance as anode materials, especially at large current densities. However, the reversible capacity is relatively low, which is a significant barrier to meeting the demands of industrial applications. This work synthesizes N-doped graphene-like carbon (NGC) intercalated Ti 3 C 2 T x (NGC-Ti 3 C 2 T x ) van der Waals heterostructure by an in situ method. The as-prepared NGC-Ti 3 C 2 T x van der Waals heterostructure is employed as sodium-ion and lithium-ion battery electrodes. For sodium-ion batteries, a reversible specific capacity of 305 mAh g -1 is achieved at a specific current of 20 mA g -1 , 2.3 times higher than that of Ti 3 C 2 T x . For lithium-ion batteries, a reversible capacity of 400 mAh g -1 at a specific current of 20 mA g -1 is 1.5 times higher than that of Ti 3 C 2 T x . Both sodium-ion and lithium-ion batteries made from NGC-Ti 3 C 2 T x shows high cycling stability. The theoretical calculations also verify the remarkable improvement in battery capacity within the NGC-Ti 3 C 2 O 2 system, attributed to the additional adsorption of working ions at the edge states of NGC. This work offers an innovative way to synthesize a new van der Waals heterostructure and provides a new route to improve the electrochemical performance significantly.

25 ENERGY STORAGE↗
DOE OSTI2022

Layered Nano-Mosaic of Niobium Disulfide Heterostructures by Direct Sulfidation of Niobium Carbide MXenes for Hydrogen Evolution

MXene-transition metal dichalcogenide (TMD) heterostructures are synthesized through a one-step heat treatment of Nb 2 C and Nb 4 C 3 . These MXenes are used without delamination or any pre-treatment. Heat treatments accomplish the sacrificial transformation of these MXenes into TMD (NbS 2 ) at 700 and 900 °C under H 2 S. This work investigates, for the first time, the role of starting MXene phase in the derivative morphology. It is shown that while treatment of Nb 2 C at 700 °C leads to the formation of pillar-like structures on the parent MXene, Nb 4 C 3 produces nano-mosaic layered NbS 2 . At 900 °C, both MXene phases, of the same transition metal, fully convert into nanomosaic layered NbS 2 preserving the parent MXene’s layered morphology. When tested as electrodes for hydrogen evolution reaction, Nb 4 C 3 -derived hybrids show better performance than Nb 2 C derivatives. The Nb 4 C 3 -derived heterostructure exhibits a low overpotential of 198 mV at 10 mA cm -2 and a Tafel slope of 122 mV dec -1 , with good cycling stability in an acidic electrolyte

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synthesis of new two-dimensional titanium carbonitride Ti 2 C 0.5 N 0.5 T x MXene and its performance as an electrode material for sodium-ion battery

Two-dimensional (2D) layered transition metal carbides/nitrides, called MXenes, are attractive alternative electrode materials for electrochemical energy storage. Owing to their metallic electrical conductivity and low ion diffusion barrier, MXenes are promising anode materials for sodium-ion batteries (SIBs). Herein, we report on a new 2D carbonitride MXene, viz ., Ti 2 C 0.5 N 0.5 T x (T x stands for surface terminations), and the only second carbonitride after Ti 3 CNT x so far. A new type of in situ HF (HCl/KF) etching condition was employed to synthesize multilayer Ti 2 C 0.5 N 0.5 T x powders from Ti 2 AlC 0.5 N 0.5 . Spontaneous intercalation of tetramethylammonium followed by sonication in water allowed for large-scale delamination of this new titanium carbonitride into 2D sheets. Multilayer Ti 2 C 0.5 N 0.5 T x powders showed higher specific capacities and larger electroactive surface area than those of Ti 2 CT x powders. Multilayer Ti 2 C 0.5 N 0.5 T x powders show a specific capacity of 182 mAh g -1 at 20 mA g -1 , the highest among all reported MXene electrodes as SIBs with excellent cycling stability.

25 ENERGY STORAGE↗
DOE OSTI2021

Engineering the Interlayer Spacing by Pre-Intercalation for High Performance Supercapacitor MXene Electrodes in Room Temperature Ionic Liquid

MXenes exhibit excellent capacitance at high scan rates in sulfuric acid aqueous electrolytes, but the narrow potential window of aqueous electrolytes limits the energy density. Organic electrolytes and room-temperature ionic liquids (RTILs) can provide higher potential windows, leading to higher energy density. The large cation size of RTIL hinders its intercalation in-between the layers of MXene limiting the specific capacitance in comparison to aqueous electrolytes. In this work, different chain lengths alkylammonium (AA) cations are intercalated into Ti 3 C 2 T x , producing variation of MXene interlayer spacings (d-spacing). AA-cation-intercalated Ti 3 C 2 T x (AA-Ti 3 C 2 ), exhibits higher specific capacitances, and cycling stabilities than pristine Ti 3 C 2 T x in 1 m 1-ethly-3-methylimidazolium bis-(trifluoromethylsulfonyl)-imide (EMIMTFSI) in acetonitrile and neat EMIMTFSI RTIL electrolytes. Pre-intercalated MXene with an interlayer spacing of ≈2.2 nm, can deliver a large specific capacitance of 257 F g –1 (1428 mF cm –2 and 492 F cm –3 ) in neat EMIMTFSI electrolyte leading to high energy density. Quasi elastic neutron scattering and electrochemical impedance spectroscopy are used to study the dynamics of confined RTIL in pre-intercalated MXene. Furthermore, molecular dynamics simulations suggest significant differences in the structures of RTIL ions and AA cations inside the Ti 3 C 2 T x interlayer, providing insights into the differences in the observed electrochemical behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Egyptian blue: from pigment to battery electrodes

Herein we report on using a well known pigment that was used by ancient Egyptians and called Egyptian blue as an anode material for Li-ion batteries (background photo by Kokhanchikov via Adobe Stock).

25 ENERGY STORAGE↗
DOE OSTI2020

Significantly Improved Cyclability of Conversion-Type Transition Metal Oxyfluoride Cathodes by Homologous Passivation Layer Reconstruction

Electrode stabilization by surface passivation has been explored as the most crucial step to develop long-cycle lithium-ion batteries (LIBs). In this work, functionally graded materials consisting of “conversion-type” iron-doped nickel oxyfluoride (NiFeOF) cathode covered with a homologous passivation layer (HPL) are rationally designed for long-cycle LIBs. The compact and fluorine-rich HPL plays dual roles in suppressing the volume change of NiFeOF porous cathode and minimizing the dissolution of transition metals during LIBs cycling by forming a structure/composition gradient. The structure and composition of HPL reconstructs during lithiation/delithiation, buffering the volume change and trapping the dissolved transition metals. As a result, a high capacity of 175 mAh g -1 (equal to an outstanding volumetric capacity of 936 Ah L -1 ) with a greatly reduced capacity decay rate of 0.012% per cycle for 1000 cycles is achieved, which is superior to the NiFeOF porous film without HPL and commercially available NiF 2 -FeF 3 powders. Finally, the proposed chemical and structure reconstruction mechanism of HPL opens a new avenue for the novel materials development for long-cycle LIBs.

25 ENERGY STORAGE↗