Engineering Papers⌕ Search

Engineering topics

Liang, Chengdu

Publications and source records attributed to Liang, Chengdu.

At least 19 records

Oxygen–coordinated low–nucleus cluster catalysts for enhanced electrocatalytic water oxidation

The oxygen evolution reaction (OER) activity of single-atom catalysts (SACs) is closely related to the coordination environment of the active site. Oxygen-coordinated atomic metal species bring about unique features beyond nitrogen-coordinated atomic metal species due to the fact that the M–O bond is weaker than the M–N bond. Herein, a series of metal–oxygen–carbon structured low-nucleus clusters (LNCs) are successfully anchored on the surface of multiwalled carbon nanotubes (M-MWCNTs, M = Ni, Co, or Fe) through a foolproof low-temperature gas transfer (300°C) method without any further treatment. The morphology and coordination configuration of the LNCs at the atomic level were confirmed by comprehensive characterizations. The synthetic Ni-MWCNTs electrocatalyst features excellent OER activity and stability under alkaline conditions, transcending the performances of Co-MWCNTs, Fe-MWCNTs and RuO 2 . Density functional theory calculations reveal that the moderate oxidation of low-nucleus Ni clusters changes the unoccupied orbital of Ni atoms, thereby lowering the energy barrier of the OER rate-limiting step and making the OER process more energy-efficient. This study demonstrates a novel versatile platform for large-scale manufacturing of oxygen-coordinated LNC catalysts.

36 MATERIALS SCIENCE↗

Regulating Electronic Structure of Single-Atom Catalysts toward Efficient Bifunctional Oxygen Electrocatalysis

We report electronic structure of single-atom catalysts (SACs) is critical for bifunctional oxygen electrocatalysis by adjusting the binding energy in oxygen-containing intermediates. However, the regulation of electronic structure has always been a challenge to improve catalytic reactivity. Herein, by introducing a heterogenous metal, the electronic structure through a direct bonding interaction to the active center atom is effectively adjusted. Partial charge transfer between the two atoms optimizes the binding energy of intermediates and reducing the energy barrier of the catalytic reaction. Theoretical calculations confirm these effects and the uniform distribution of 3d orbitals, leading to the improvement of bifunctional oxygen electrocatalytic reactivity. Benefiting from these attributes, the as-constructed bifunctional catalyst enables outstanding electrocatalytic performances in both oxygen reduction and hydrogen oxidation in various energy storage systems. The generality and expandability of this strategy is demonstrated by further successful development of other dual-metal catalysts systems with various active metals.

36 MATERIALS SCIENCE↗

Visualizing Lithium Dendrite Formation within Solid-State Electrolytes

Solid-state electrolyte (SSE) is promising for application in allsolid-state lithium metal batteries because of its reliable safety and longevity. The failure of SSE to suppress dendrite formation of Li metal anodes has been conventionally explained by uneven Li deposition at Li/SSE interfaces and its subsequent dendritic growth. While Li deposition within SSE has been recently proposed as another key cause for SSE failure, little is known regarding the Li growth details inside the SSE itself. In this work, we performed in situ microscopic observation of Li deposition inside the SSE and obtained visualized evidence regarding the dynamic process of Li dendrite formation and growth. Here, Li is seen to directly nucleate and propagate within the SSE, leading to its structural cracking. Such behavior should be caused by the presence of P- and S-based crystalline defects in Li 3 PS 4 SSE, which is consistent with the cryo-transmission electron microscopy observations and theoretical calculations. This observation provides important insights into the growth mechanisms of Li dendrites within a working lithium battery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Abnormally Low Activation Energy in Cubic Na3SbS4 Superionic Conductor

Inorganic Na-ion superionic conductors play a vital role in all-solid-state Na batteries that operate at room temperature. Sodium thioantimonate (Na3SbS4), a popular sulfide-based solid electrolyte, has attracted serious attention due to its advantages of high ionic conductivity at room temperature and impressive chemical stability under ambient conditions. Much research detailing Na3SbS4 focused on its synthetic approaches and interfacial stability against Na metal, yet, there is limited information elucidating a fundamental understanding of the Na- ion diffusion mechanisms in Na3SbS4 with different crystal structures (e.g., tetragonal and cubic). Herein, we combine real-time electrochemical impedance measurements with theoretical simulations based on density functional theory and in situ quasi-elastic neutron scattering to study the Na-ion conductive properties of Na3SbS4 during its phase transition from a tetragonal to cubic structure. Although there is a slight change in the lattice parameters, the energy barrier for Na-ion diffusion in the tetragonal structure was determined to be much larger (5-10 times) than that in the cubic structure from both theoretical and experimental perspectives. The high degree of symmetry in cubic Na3SbS4 leads to less interatomic correlations between Na and S(Sb) atoms, a shorter jump distance (2.85 angstrom), and a larger diffusion coefficient. This research provides insight into understanding the Na-ion diffusion in solid electrolytes with phase transitions and provides fundamental guidance for designing novel solid-state Na-ion conductors.

Zhang, Qian↗

Accommodation of Silicon in an Interconnected Copper Network for Robust Li-Ion Storage

Silicon (Si)-based materials are one of the most promising anodes to be applied in rechargeable lithium ion batteries. However, the active Si/electrolyte interface causes continuous side reactions and poor conductivity, which significantly decreases the cycling stability. Cu is the only metallic current collector that has been known to promote electron conduction and lithium-ion transfer without alloying reaction occurrence. However, to the best current knowledge, scalable interface engineering incorporating Cu has not been reported. In this study, this conductive Cu interface (CCI) is constructed through a self-assembly carbothermic reduction method to achieve efficient protection of Si/electrolyte interfaces while allowing for fast Li + diffusion. The energy barrier of lithium-ion diffusion through Cu is calculated to be 0.1965 eV, which is much lower than that through Au, Fe, and Ni films. Benefiting from the enhanced interfacial protection and kinetics of Si with CCI, a fading rate of only 0.068% is maintained for 1000 cycles and an aerial capacity of 4.78 mAh cm -2 is achieved after 280 cycles, which is comparable to the industry standards required for practical application.

36 MATERIALS SCIENCE↗

Lipon coatings for high voltage and high temperature Li-ion battery cathodes

A lithium ion battery includes an anode and a cathode. The cathode includes a lithium, manganese, nickel, and oxygen containing compound. An electrolyte is disposed between the anode and the cathode. A protective layer is deposited between the cathode and the electrolyte. The protective layer includes pure lithium phosphorus oxynitride and variations that include metal dopants such as Fe, Ti, Ni, V, Cr, Cu, and Co. A method for making a cathode and a method for operating a battery are also disclosed.

36 MATERIALS SCIENCE↗

High-conduction GE substituted LiAsS4 solid electrolyte

A solid electrolyte for a lithium battery includes Li3+xGexAs1-xS4 where x=0 to 0.50. The value of x can be a range of any high value and any lower value from 0 to 0.50. For example, x can be 0.25 to 0.50, and x can be 0.3 to 0.4, among many other possible ranges. In one embodiment x=0.33 such that the solid electrolyte is Li3.334Ge0.334As0.666S4. A solid electrolyte for a lithium battery can include LiAsS4 wherein ½ to ⅔ of the As is substituted with Ge. A lithium battery and a method for making a lithium battery are also disclosed.

25 ENERGY STORAGE↗

Polyisoprene Captured Sulfur Nanocomposite Materials for High-Areal-Capacity Lithium Sulfur Battery

A polyisoprene-sulfur (PIPS) copolymer and nano sulfur composite material (90 wt % sulfur) is synthesized through inverse vulcanization of PIP polymer with micrometer-sized sulfur particles for high-areal-capacity lithium sulfur batteries. The polycrystalline structure and nanodomain nature of the copolymer are revealed through high-resolution transmission electron microscopy (HRTEM). PIP polymer is also used as binders for the electrode to further capture the dissovlved polysulfides. A high areal capacity of ca. 7.0 mAh/cm 2 and stable cycling are achieved based on the PIPS nanosulfur composite with a PIP binder, crucial to commercialization of lithium sulfur batteries. The chemical confinement both at material and electrode level alleviates the diffusion of polysulfides and the shuttle effect. The sulfur electrodes, both fresh and cycled, are analyzed through scanning electron microscopy (SEM). Finally, this approach enables scalable material production and high sulfur utilization at the cell level.

25 ENERGY STORAGE↗

Revealing the Structural Stability and Na-Ion Mobility of 3D Superionic Conductor Na 3 SbS 4 at Extremely Low Temperatures

All-solid-state batteries that employ superionic solid conductor potentially enable the broadening of battery operation in harsh environments, such as under subzero temperatures and even lower. The solid electrolyte as the key component requires structural stability, high-efficiency of ion transportation channels, and low activation energy to maintain the fast-ionic conduction against temperature drop. Herein, we use 3D superionic conductor Na 3 SbS 4 as a model to investigate the structure and conductive mechanism at extremely low temperature. Cryogenic in situ neutron and X-ray diffractions reveal that Na 3 SbS 4 maintains a stable tetragonal crystal structure and the anisotropic lattice contraction upon cooling. The dimensions of the S-gate (represented by the S–S pair length) that Na ions hop through in the 3D transportation network is found to maintain open sizes in the xy -plane, contributing to the low activation energy and impressive ionic conductivity. The Na-ion transportation network is demonstrated to be directionally accessible at the extremely low temperature, which reveals the ion conductive mechanism at broadened temperature range in the view of structure. Furthermore, these findings provide valuable guidance in the search for materials as promising solid electrolyte in solid-state batteries to fulfill harsh environmental needs.

36 MATERIALS SCIENCE↗

In-situ investigation of pressure effect on structural evolution and conductivity of Na 3 SbS 4 superionic conductor

Sulfide-based conductors are one class of the most promising solid electrolytes for next-generation of all-solid-state batteries due to their advantages on high ionic conductivity and favorable mechanical properties of easy densification. Besides new material chemistry to be explored, understanding the pressure effect on structure and property is equally important from both fundamental and practical considerations, as pressure is one way to tune the properties of such solid electrolytes. Here we address the pressure-driven structural evolution and conductivity change of Na 3 SbS 4 solid electrolyte through the integration of molecular dynamics (MD) simulation and in-situ experiments. Theoretical calculation predicts that no phase transition happens to tetragonal Na 3 SbS 4 under 10 GPa isotopically pressure. Synchrotron X-ray diffraction and Raman results confirm that Na 3 SbS 4 keeps stable tetragonal structure but shows anisotropic compressibility along different directions. After pressure release, the ionic conductivity of Na 3 SbS 4 increases by four folds to 1.6 mS cm -1 , which is derived from the dramatic decrease of grain boundary resistance.

42 ENGINEERING↗

Fabrication of Sub-Micrometer-Thick Solid Electrolyte Membranes of β-Li 3 PS 4 via Tiled Assembly of Nanoscale, Plate-Like Building Blocks

Here solid electrolytes represent a critical component in future batteries that provide higher energy and power densities than the current lithium-ion batteries. The potential of using ultrathin films is among the best merits of solid electrolytes for considerably reducing the weight and volume of each battery unit, thereby significantly enhancing the energy density. However, it is challenging to fabricate ultrathin membranes of solid electrolytes using the conventional techniques. Here, a new strategy is reported for fabricating sub-micrometer-thick membranes of β-Li 3 PS 4 solid electrolytes via tiled assembly of shape-controlled, nanoscale building blocks. This strategy relies on facile, low-cost, solution-based chemistry to create membranes with tunable thicknesses. The ultrathin membranes of β-Li 3 PS 4 show desirable ionic conductivity and necessary compatibility with metallic lithium anodes. The results of this study also highlight a viable strategy for creating ultrathin, dense solid electrolytes with high ionic conductivities for the next-generation energy storage and conversion systems.

25 ENERGY STORAGE↗

Polyarene mediators for mediated redox flow battery

The fundamental charge storage mechanisms in a number of currently studied high energy redox couples are based on intercalation, conversion, or displacement reactions. With exception to certain metal-air chemistries, most often the active redox materials are stored physically in the electrochemical cell stack thereby lowering the practical gravimetric and volumetric energy density as a tradeoff to achieve reasonable power density. In a general embodiment, a mediated redox flow battery includes a series of secondary organic molecules that form highly reduced anionic radicals as reaction mediator pairs for the reduction and oxidation of primary high capacity redox species ex situ from the electrochemical cell stack. Arenes are reduced to stable anionic radicals that in turn reduce a primary anode to the charged state. The primary anode is then discharged using a second lower potential (more positive) arene. Compatible separators and solvents are also disclosed herein.

25 ENERGY STORAGE↗

Lipon coatings for high voltage and high temperature Li-ion battery cathodes

A lithium ion battery includes an anode and a cathode. The cathode includes a lithium, manganese, nickel, and oxygen containing compound. An electrolyte is disposed between the anode and the cathode. A protective layer is deposited between the cathode and the electrolyte. The protective layer includes pure lithium phosphorus oxynitride and variations that include metal dopants such as Fe, Ti, Ni, V, Cr, Cu, and Co. A method for making a cathode and a method for operating a battery are also disclosed.

25 ENERGY STORAGE↗

All-solid state lithium carbon monofluoride batteries

A solid state lithium carbon monofluoride battery includes an anode comprising Li, a solid electrolyte, and a cathode including CF.sub.x and LPS. The cathode can also include a carbon compound. The solid electrolyte can include LPS. The LPS can include .beta.-Li.sub.3PS.sub.4. The cathode LPS can include .beta.-Li.sub.3PS.sub.4. A method of making a battery is also disclosed.

25 ENERGY STORAGE↗

Sulfur-carbon nanocomposites and their application as cathode materials in lithium-sulfur batteries

The invention is directed in a first aspect to a sulfur-carbon composite material comprising: (i) a bimodal porous carbon component containing therein a first mode of pores which are mesopores, and a second mode of pores which are micropores; and (ii) elemental sulfur contained in at least a portion of said micropores. The invention is also directed to the aforesaid sulfur-carbon composite as a layer on a current collector material; a lithium ion battery containing the sulfur-carbon composite in a cathode therein; as well as a method for preparing the sulfur-composite material.

25 ENERGY STORAGE↗

Electrochemical method for synthesizing metal-containing particles and other objects

The invention is directed to a method for producing metal-containing (e.g., non-oxide, oxide, or elemental) nano-objects, which may be nanoparticles or nanowires, the method comprising contacting an aqueous solution comprising a metal salt and water with an electrically powered electrode to form said metal-containing nano-objects dislodged from the electrode, wherein said electrode possesses a nanotextured surface that functions to confine the particle growth process to form said metal-containing nano-objects. The invention is also directed to the resulting metal-containing compositions as well as devices in which they are incorporated.

36 MATERIALS SCIENCE↗

Lipon coatings for high voltage and high temperature Li-ion battery cathodes

A lithium ion battery includes an anode and a cathode. The cathode includes a lithium, manganese, nickel, and oxygen containing compound. An electrolyte is disposed between the anode and the cathode. A protective layer is deposited between the cathode and the electrolyte. The protective layer includes pure lithium phosphorus oxynitride and variations that include metal dopants such as Fe, Ti, Ni, V, Cr, Cu, and Co. A method for making a cathode and a method for operating a battery are also disclosed.

25 ENERGY STORAGE↗