Engineering Papers⌕ Search

Engineering topics

Lian, Tianquan

Publications and source records attributed to Lian, Tianquan.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Pt Particle Size Affects Both the Charge Separation and Water Reduction Efficiencies of CdS–Pt Nanorod Photocatalysts for Light Driven H 2 Generation

Decreasing the metal catalyst size into nanoclusters or even single atom is an emerging direction of developing more efficient and cost-effective photocatalytic systems. Because the catalyst particle size affects both the catalyst activity and light driven charge separation efficiency, their effects on the overall photocatalytic efficiency are still poorly understood. Herein, using a well-defined semiconductor–metal heterostructure with Pt nanoparticle catalysts selectively grown on the apexes of CdS nanorods (NRs), we study the effect of the Pt catalyst size on light driven H 2 generation quantum efficiency (QE H 2 ). With the increase of the Pt catalyst size from 0.7 ± 0.3 to 3.0 ± 0.8 nm, the QEH 2 of CdS–Pt increases from 0.5 ± 0.2% to 38.3 ± 5.1%, by nearly 2 orders of magnitude. Transient absorption spectroscopy measurement reveals that the electron transfer rate from the CdS NR to the Pt tip increases with the Pt diameter following a scaling law of d 5.6 , giving rise to the increase of electron transfer efficiency at larger Pt sizes. Additionally, the observed trend can be understood by a simplified kinetic model that assumes the overall efficiency is the product of the quantum efficiencies of charge separation (including hole transfer, electron transfer, and hole scavenging) and water reduction steps, and for CdS–Pt NRs, the quantum efficiencies of electron transfer and water reduction steps increase with the Pt sizes. Our findings suggest the importance of improving the quantum efficiencies of both charge separation and catalysis in designing efficient semiconductor–metal hybrid photocatalysts, especially in the regime of small metal particle sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Slow Auger Recombination of Trapped Excitons Enables Efficient Multiple Electron Transfer in CdS–Pt Nanorod Heterostructures

We report solar-to-fuel conversion reaction often requires multiple proton-coupled electron transfer (PCET) processes powered by the energetic electrons and/or holes generated by the absorption of multiple photons. The effective coupling of multiple electron transfer from the light absorber with the multiple PCET reactions at the catalytic center is one of the key challenges in efficient and selective conversion of solar energy to chemical fuels. In this paper, we examine the dynamics of multiple electron transfer in quantum confined CdS nanorods with a Pt tip, in which the CdS rod functions as the light absorber and the Pt tip the catalytic center. By excitation-fluence-dependent transient absorption spectroscopic measurements, we show that the multiexciton Auger recombination rate in CdS rods follows a carrier-collision model, k n A = n 2 (n – 1)/4k 2 A , with a biexciton lifetime (1/k 2 A ) of 2.0 ± 0.2 ns. In CdS–Pt nanorods, electron transfer kinetics from the CdS conduction band edge to the Pt show negligible dependence on the excitation fluence, occurring with a half-life time of 5.6 ± 0.6 ps. The efficiency of multiple exciton dissociation by multiple electron transfer to Pt decreases from 100% in biexciton states to ~41% at 22 exciton state due to the competition with Auger recombination. The half-lifetime of the n-charge separated state recombination (with n electrons in the Pt and n holes in the CdS) decreases from 10 μs in the single charge separated state to 42 ns in nine charge separated states. Our findings suggest the possibility of driving multielectron photocatalytic reactions under intense illumination and controlling product selectivity through multielectron transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Direct Observation of Photoexcited Charge Carrier Dynamics and Electrostatic Fields at Photocatalytic Semiconductor/liquid Interfaces

Photoelectrochemical conversion of solar energy to fuels at semiconductor-liquid interfaces involves a complex set of processes, which include band bending, built-in electric fields, surface recombination of photoexcited carriers, and ultimately charge transfer to the ions in solution, in which the electrostatic fields within the depletion region of the semiconductor plays an important role. There are loss mechanisms associated with each of these key components in the overall photoelectrochemical conversion efficiency. Direct probe of these elementary processes is key to the rational improvement of photoeletrochemical cells and electrodes. In this collaborative project, Tianquan Lian at Emory University, Steve Cronin at University of Southern California and their students and postdoctoral fellows carried out a series of studies that are aimed at direct observation of photoexcited charge carrier dynamics at photocatalytic semiconductor/liquid interfaces. The collaborative work led to the development of transient reflectance spectroscopy as a tool for in situ probing of carrier dynamics in planar photoelectrode/electrode interface; and the demonstration that this tool can be used to study oxide protected GaP to identify key efficiency limiting factors in these photoelectrodes. This work has led to the development a tool for in situ probing of carrier dynamics in planar photoelectrodes, which will facilitate the mechanistic study of photoelectrochemical cells. This work informs the development of better photoelectrode materials for solar water splitting and CO 2 reduction. This work has contributed to the training of three PhD students in the area of photoelectrochemistry, ultrafast spectroscopy and solar energy conversion

14 SOLAR ENERGY↗
DOE OSTI2021

Deep Optical Switching on Subpicosecond Timescales in an Amorphous Ge Metamaterial

Active nanostructured optical components show promise as potential building blocks for novel light-based computing and data processing architectures. However, nanoscale all-optical switches that have low activation powers and high-contrast ultrafast switching have been elusive so far. Here, pump–probe measurements performed on amorphous-Ge-based micro-resonator metasurfaces that exhibit strong resonant modes in the mid-infrared are reported. Relative change is observed in transmittance of ΔT/T ≈ 1 with picosecond (down to τ ≈ 0.5 ps) free carrier relaxation rates, obtained with very low pump fluences of 50 μJ cm –2 . In this work, these observations are attributed to efficient free carrier promotion, affecting light transmittance via high quality-factor optical resonances, followed by an increased electron–phonon scattering of free carriers due to the amorphous crystal structure of Ge. Full-wave simulations based on a permittivity model that describes free-carrier damping through crystal structure disorder find excellent agreement with the experimental data. These findings offer an efficient and robust platform for all-optical switching at the nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Highly Efficient Plasmon Induced Hot-Electron Transfer at Ag/TiO 2 Interface

Plasmon induced hot carrier transfer is a promising novel approach for solar energy conversion, but its practical application is often hindered by its low efficiency. This work demonstrates an unprecedented quantum efficiency of plasmonic hot-electron transfer of up to 53 ± 2% from 1.7 nm silver nanoparticles to anatase nanoporous TiOsub>2 films at 400 nm excitation. This efficient hot-electron transfer consists of contributions of both hot electrons generated by plasmon decay through exciting Ag intraband transitions and Ag-to-TiO 2 interfacial charge-transfer transitions. The efficiencies of both pathways increase at smaller Ag particle sizes from 5.9 to 1.7 nm, suggesting that decreasing particle sizes is a promising way toward efficient plasmonic hot-carrier extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Tafel Slope Analyses for Homogeneous Catalytic Reactions

Tafel analysis of electrocatalysts is essential in their characterization. This paper analyzes the application of Tafel-like analysis to the four-electron nonelectrochemical oxidation of water by the stoichiometric homogeneous 1-electron oxidant [Ru(bpy)3]3+ to dioxygen catalyzed by homogeneous catalysts, [Ru4O4(OH)2(H2O)4(γ-SiW10O36)2]10− (Ru4POM) and [Co4(H2O)2(PW9O34)2]10– (Co4POM). These complexes have slow electron exchange rates with electrodes due to the Frumkin effect, which precludes the use of known electrochemical methods to obtain Tafel plots at ionic strengths lower than 0.5 M. The application of an electron transfer catalyst, [Ru(bpy)3]3+/2+, increases the rates between the Ru4POM and electrode, but a traditional Tafel analysis of such a complex system is precluded due to a lack of appropriate theoretical models for 4-electron processes. Here, we develop a theoretical framework and experimental procedures for a Tafel-like analysis of Ru4POM and Co4POM, using a stoichiometric molecular oxidant [Ru(bpy)3]3+. The dependence of turnover frequency (TOF) as a function of electrochemical solution potential created by the [Ru(bpy)3]3+/[Ru(bpy)3]2+ redox couple (an analog of the Tafel plot) was obtained from kinetics data and interpreted based on the suggested reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Plasmon Energy Transfer in Hybrid Nanoantennas

Plasmonic metal nanoparticles exhibit large dipole moments upon photoexcitation and have the potential to induce electronic transitions in nearby materials, but fast internal relaxation has to date limited the spatial range and efficiency of plasmonic mediated processes. In this work, we use photo-electrochemistry to synthesize hybrid nanoantennas comprised of plasmonic nanoparticles with photoconductive polymer coatings. Here, we demonstrate that the formation of the conductive polymer is selective to the nanoparticles and that polymerization is enhanced by photoexcitation. In situ spectroscopy and simulations support a mechanism in which up to 50% efficiency of nonradiative energy transfer is achieved. These hybrid nanoantennas combine the unmatched light-harvesting properties of a plasmonic antenna with the similarly unmatched device processability of a polymer shell.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mechanistic Understanding and Rational Design of Quantum Dot/Mediator Interfaces for Efficient Photon Upconversion

The semiconductor-nanocrystal-sensitized, three-component upconversion system has made great strides over the past 5 years. The three components (i.e., triplet photosensitizer, mediator, and emitter) each play critical roles in determining the input and output photon energy and overall quantum efficiency (QE). The nanocrystal photosensitizer converts the absorbed photon into singlet excitons and then triplet excitons via intersystem crossing. The mediator accepts the triplet exciton via either direct Dexter-type triplet energy transfer (TET) or sequential charge transfer (CT) while extending the exciton lifetime. Through a second triplet energy-transfer step from the mediator to the emitter, the latter is populated in its lowest excited triplet state. Triplet–triplet annihilation (TTA) between two triplet emitters generates the emitter in its bright singlet state, which then emits the upconverted photon. Quantum dots (QD) have a tunable band gap, large extinction coefficient, and small singlet–triplet energy losses compared to metal–ligand charge-transfer complexes. This high triplet exciton yield makes QDs good candidates for photosensitizers. In terms of driving triplet energy transfer, the triplet energy of the mediator should be slightly lower than the triplet exciton energy of the QD sensitizer for a downhill energy landscape with minimal energy loss. The same energy cascade is also required for the transfer from the mediator to the emitter. Lastly, the triplet energy of the emitter must be slightly larger than one-half of its singlet energy to ensure that TTA is exothermic. Optimization of the sensitizer, mediator, and emitter will lead to an increase in the anti-Stokes shift and the total quantum efficiency. Evaluating each individual step’s efficiency and kinetics is necessary for the understanding of the limiting factors in existing systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enhanced intersystem crossing of boron dipyrromethene by TEMPO radical

Radical enhanced intersystem crossing (EISC) of organic chromophores is an important approach to generate a long-lived triplet state for various electronic and optoelectronic applications. However, structural factors and design rules to promote EISC are not entirely clear. In this work, we report a series of boron dipyrromethene (BODIPY) derivatives covalently linked with a 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO) radical with varying distances and topologies. We show that the incorporation of the TEMPO radical to BODIPY results in strong fluorescence quenching by up to 85% as a result of EISC and enhanced internal conversion. In BDP-2AR [2-(4-methyleneamino-TEMPO) BODIPY], a dyad with the shortest BODIPY–TEMPO through-bond distance, we observe the fastest EISC rate (τ isc = 1.4 ns) and the longest triplet excited state lifetime (τ T = 32 μs) compared to other distance and geometry variations. Contrary to previous reports and a general presumption, the BODIPY–TEMPO through-bond distance in this system does not play a significant role on the triplet formation rate and yield. Finally, density functional theory suggests a folding of the TEMPO radical to form a sandwich-like structure with a BODIPY ring that leads to a decrease in the through-space distance, providing a new and an interesting insight for the radical enhanced intersystem.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Evolution from Tunneling to Hopping Mediated Triplet Energy Transfer from Quantum Dots to Molecules

Efficient energy transfer is particularly important for multiexcitonic processes like singlet fission and photon upconversion. Observation of the transition from short-range tunneling to long-range hopping during triplet exciton transfer from CdSe nanocrystals to anthracene is reported here. This is firmly supported by steady- state photon upconversion measurements, a direct proxy for the efficiency of triplet energy transfer (TET), as well as transient absorption measurements. When phenylene bridges are initially inserted between a CdSe nanocrystal donor and anthracene acceptor, the rate of TET decreases exponentially, commensurate with a decrease in the photon upconversion quantum efficiency from 11.6% to 4.51% to 0.284%, as expected from a tunneling mechanism. However, as the rigid bridge is increased in length to 4 and 5 phenylene units, photon upconversion quantum efficiencies increase again to 0.468% and 0.413%, 1.5–1.6 fold higher than that with 3 phenylene units (using the convention where the maximum upconversion quantum efficiency is 100%). This suggests a transition from exciton tunneling to hopping, resulting in relatively efficient and distance-independent TET beyond the traditional 1 nm Dexter distance. Transient absorption spectroscopy is used to confirm triplet energy transfer from CdSe to transmitter, and the formation of a bridge triplet state as an intermediate for the hopping mechanism. Lastly, this first observation of the tunneling-to-hopping transition for long-range triplet energy transfer between nanocrystal light absorbers and molecular acceptors suggests that these hybrid materials should further be explored in the context of artificial photosynthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗