Engineering Papers⌕ Search

Engineering topics

Li, Zhen

Publications and source records attributed to Li, Zhen.

134 records · Page 8

Adjusting inhomogeneous daily temperature variability using wavelet analysis

A wavelet-analysis-based homogenization method (WHM) is developed for detecting and adjusting biases of variability in a daily climate observation series, which are influential in the estimation of climate extremes and relevant trends in the time series. WHM is applied to the Central England daily mean temperature series (CET, 1772–2010) and the daily mean temperature series at Henan station in mountainous western China (HNT, 1960–2008) in order to demonstrate the usefulness of the new technique. The changes of methods for calculating daily mean temperature for CET in 1878 caused significantly reduced daily variability (DV) in the subsequent sub-series of CET. The relocation of the Chinese station in 1981 to a higher mountainous site resulted in not only enhanced DV but also in weather (weekly) time-scale variability (WV) in the subsequent sub-series of HNT. The adjustments based on WHM in the present cases improve the estimates of the long-term trends of climate extremes such as hot days, cold days, heat waves, and cold surges. A few widely applied methods of homogenization such as multiple analysis of series for homogenization (MASH), higher-order moment (HOM), RHtestsV3 with quantile-matching (QM) adjustments and two-phase regression (TPR) are also applied to HNT for comparison. TPR is not aimed at improving the homogeneity of variability in the time series; MASH does not improve daily variability either; HOM improves it in a small way; and with RHtestsV3 with QM adjustments it is considerably improved, but biases remain. In contrast, WHM improves the homogeneity of the short-term variability in the time series, resulting in reasonable assessments of climate extremes and trends in the daily observations.

54 ENVIRONMENTAL SCIENCES↗

Controllable synthesis and enhanced photocatalytic properties of Cu{sub 2}O/Cu{sub 31}S{sub 16} composites

Highlights: ► Facile sonochemical route. ► The content of Cu{sub 31}S{sub 16} in the Cu{sub 2}O/Cu{sub 31}S{sub 16} can be easily controlled. ► Structure and optical properties of Cu{sub 2}O/Cu{sub 31}S{sub 16} were discussed. ► Enhanced photocatalytic property of Cu{sub 2}O/Cu{sub 31}S{sub 16}. ► Cu{sub 2}O/Cu{sub 31}S{sub 16} core/shell structures were more stable than single Cu{sub 2}O particles. -- Abstract: The controlled synthesis of Cu{sub 2}O/Cu{sub 31}S{sub 16} microcomposites with hierarchical structures had been prepared via a convenient sonochemical route. Ultrasonic irradiation of a mixture of Cu{sub 2}O and (NH{sub 2}){sub 2}CS in an aqueous medium yielded Cu{sub 2}O/Cu{sub 31}S{sub 16} composites. The content of Cu{sub 31}S{sub 16} in the Cu{sub 2}O/Cu{sub 31}S{sub 16} can be easily controlled by adjusting the synthesis time. The Cu{sub 31}S{sub 16} layer not only protected and stabilized Cu{sub 2}O particles, but also prohibited the recombination of photogenerated electrons–holes pair between Cu{sub 31}S{sub 16} and Cu{sub 2}O. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) spectra, ultraviolet–visible (UV–Vis) spectroscopy and photoluminescence (PL) spectroscopy were used to characterize the products. Photocatalytic performance of the Cu{sub 2}O/Cu{sub 31}S{sub 16} hierarchical structures was evaluated by measuring the decomposition rate of methyl orange solution under natural light. To the best of our knowledge, this is the first report on the preparation and photocatalytic activity of Cu{sub 2}O/Cu{sub 31}S{sub 16} microcomposite. Additionally, the Cu{sub 2}O/Cu{sub 31}S{sub 16} core/shell structures were more stable than single Cu{sub 2}O particles during photocatalytic process since the photocatalytic activity of the second reused architecture sample was much higher than that of pure Cu{sub 2}O. The Cu{sub 2}O/Cu{sub 31}S{sub 16} microcomposites may be a good promising candidate for wastewater treatment.

36 MATERIALS SCIENCE↗

Synthesis and photochromic properties of EDTA-induced MoO{sub 3} powder

Graphical abstract: The MoO{sub 3} powder, which exhibits highly dispersed floral aggregated-like structure built up by superimposed and staggered nanoflakes with a diameter of 1-1.5 {mu}m and a thickness of 0.1-0.2 {mu}m, has been successfully obtained when the molar ratio of EDTA/Mo{sup 6+} is 0.05:1. The EDTA inducer obviously enlarges the surface area and apparently enhances the reactivity of MoO{sub 3} powders, making it show greater absorptive capacity to the excitation light and better photochromic properties than the pure MoO{sub 3} powder. Highlights: {yields} EDTA as organic inducing agent. {yields} EDTA inducer at EDTA/Mo{sup 6+} molar ratio of 0.05:1 enables growth of flower-like microspheres. {yields} The formation of flower-like MoO{sub 3} makes its photochromic properties strongly enhanced. -- Abstract: In this study, the photochromic MoO{sub 3} powder with novel morphology has been synthesized via hydrothermal method, using ethylene diamine tetraacetice acid (EDTA) as organic inducing agent. The influence of EDTA on the morphology, structure and photochromic properties of MoO{sub 3} powder has been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), as well as ultraviolet and visible spectroscopy (UV-vis) and color difference meter. When the molar ratio of EDTA/Mo{sup 6+} is 0.05:1, the EDTA-induced MoO{sub 3} powder is found to have 3D flower-like morphologies and excellent photochromic properties. Furthermore, the possible growth mechanism of the flower-like structure and the photochromic mechanism of MoO{sub 3} powder are also discussed in detail.

36 MATERIALS SCIENCE↗

A Radiation-Hard Silicon Drift Detector Array for Extraterrestrial Element Mapping

Measurement of x-rays from the surface of objects can tell us about the chemical composition Absorption of radiation causes characteristic fluorescence from material being irradiated. By measuring the spectrum of the radiation and identifying lines in the spectrum, the emitting element (s) can be identified. This technique works for any object that has no absorbing atmosphere and significant surface irradiation : Our Moon, the icy moons of Jupiter, the moons of Mars, the planet Mercury, Asteroids and Comets

Gaskin, Jessica↗

Experimental investigation of plastic finned-tube heat exchangers, with emphasis on material thermal conductivity

In this paper, two modified types of polypropylene (PP) with high thermal conductivity up to 2.3 W/m K and 16.5 W/m K are used to manufacture the finned-tube heat exchangers, which are prospected to be used in liquid desiccant air conditioning, heat recovery, water source heat pump, sea water desalination, etc. A third plastic heat exchanger is also manufactured with ordinary PP for validation and comparison. Experiments are carried out to determine the thermal performance of the plastic heat exchangers. It is found that the plastic finned-tube heat exchanger with thermal conductivity of 16.5 W/m K can achieve overall heat transfer coefficient of 34 W/m{sup 2} K. The experimental results are compared with calculation and they agree well with each other. Finally, the effect of material thermal conductivity on heat exchanger thermal performance is studied in detail. The results show that there is a threshold value of material thermal conductivity. Below this value improving thermal conductivity can considerably improve the heat exchanger performance while over this value improving thermal conductivity contributes very little to performance enhancement. For the finned-tube heat exchanger designed in this paper, when the plastic thermal conductivity can reach over 15 W/m K, it can achieve more than 95% of the titanium heat exchanger performance and 84% of the aluminum or copper heat exchanger performance with the same dimension. (author)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Correlations Between Sea-Surface Salinity Tendencies and Freshwater Fluxes in the Pacific Ocean

Temporal changes in sea-surface salinity (SSS) from 21 years of a high resolution model integration of the Pacific Ocean are correlated with the freshwater flux that was used to force the integration. The correlations are calculated on a 1 x10 grid, and on a monthly scale to assess the possibility of deducing evaporation minus precipitation (E-P) fields from the salinity measurements to be taken by the upcoming Aquarius/SAC-D mission. Correlations between the monthly mean E-P fields and monthly mean SSS temporal tendencies are mainly zonally-oriented, and are highest where the local precipitation is relatively high. Nonseasonal (deviations from the monthly mean) correlations are highest along mid-latitude storm tracks and are relatively small in the tropics. The response of the model's surface salinity to surface forcing is very complex, and retrievals of freshwater fluxes from SSS measurements alone will require consideration of other processes, including horizontal advection and vertical mixing, rather than a simple balance between the two.

Li, Zhen↗

Global Autocorrelation Scales of the Partial Pressure of Oceanic CO2

A global database of approximately 1.7 million observations of the partial pressure of carbon dioxide in surface ocean waters (pCO2) collected between 1970 and 2003 is used to estimate its spatial autocorrelation structure. The patterns of the lag distance where the autocorrelation exceeds 0.8 is similar to patterns in the spatial distribution of the first baroclinic Rossby radius of deformation indicating that ocean circulation processes play a significant role in determining the spatial variability of pCO2. For example, the global maximum of the distance at which autocorrelations exceed 0.8 averages about 140 km in the equatorial Pacific. Also, the lag distance at which the autocorrelation exceed 0.8 is greater in the vicinity of the Gulf Stream than it is near the Kuroshio, approximately 50 km near the Gulf Stream as opposed to 20 km near the Kuroshio. Separate calculations for times when the sun is north and south of the equator revealed no obvious seasonal dependence of the spatial autocorrelation scales. The pCO2 measurements at Ocean Weather Station (OWS) 'P', in the eastern subarctic Pacific (50 N, 145 W) is the only fixed location where an uninterrupted time series of sufficient length exists to calculate a meaningful temporal autocorrelation function for lags greater than a few days. The estimated temporal autocorrelation function at OWS 'P', is highly variable. A spectral analysis of the longest four pCO2 time series indicates a high level of variability occurring over periods from the atmospheric synoptic to the maximum length of the time series, in this case 42 days. It is likely that a relative peak in variability with a period of 3-6 days is related to atmospheric synoptic period variability and ocean mixing events due to wind stirring. However, the short length of available time series makes identifying temporal relationships between pCO2 and atmospheric or ocean processes problematic.

Li, Zhen↗