Engineering Papers⌕ Search

Engineering topics

Li, Zhen

Publications and source records attributed to Li, Zhen.

At least 73 records · Page 4

Allele-defined genome of the autopolyploid sugarcane Saccharum spontaneum L.

Modern sugarcanes are polyploid interspecific hybrids, combining high sugar content from Saccharum officinarum with hardiness, disease resistance and ratooning of Saccharum spontaneum. Sequencing of a haploid S. spontaneum, AP85-441, facilitated the assembly of 32 pseudo-chromosomes comprising 8 homologous groups of 4 members each, bearing 35,525 genes with alleles defined. The reduction of basic chromosome number from 10 to 8 in S. spontaneum was caused by fissions of 2 ancestral chromosomes followed by translocations to 4 chromosomes. Surprisingly, 80% of nucleotide binding site-encoding genes associated with disease resistance are located in 4 rearranged chromosomes and 51% of those in rearranged regions. Resequencing of 64 S. spontaneum genomes identified balancing selection in rearranged regions, maintaining their diversity. Introgressed S. spontaneum chromosomes in modern sugarcanes are randomly distributed in AP85-441 genome, indicating random recombination among homologs in different S. spontaneum accessions. The allele-defined Saccharum genome offers new knowledge and resources to accelerate sugarcane improvement.

09 BIOMASS FUELS↗

Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells

Achieving long-term operational stability at a high efficiency level for perovskite solar cells is the most challenging issue toward commercialization of this emerging photovoltaic technology. Here, we investigated the cooperation of a Lewis base and a Lewis acid by combining commercial bis-PCBM mixed isomers as the Lewis acid in the antisolvent and N -(4-bromophenyl)thiourea (BrPh-ThR) as the Lewis base in the perovskite solution precursor. The combination of the Lewis base and the Lewis acid synergistically passivates Pb 2+ and PbX 3– antisite defects, enlarges the perovskite grain size, and improves charge-carrier separation and transport, leading to improved device efficiency from 19.3% to 21.7%. In addition, this Lewis base and acid combination also suppresses moisture incursion and passivates pinholes generated in the hole-transporting layer. Furthermore, the unsealed devices remained at 93% of the initial efficiency value in ambient air (10–20% relative humidity) after 3600 h at 20–25 °C and dropped by 10% after 1500 h under continuous operation at 1-sun illumination and 55 °C in nitrogen with maximum power-point tracking.

14 SOLAR ENERGY↗

Impact of Layer Thickness on the Charge Carrier and Spin Coherence Lifetime in Two-Dimensional Layered Perovskite Single Crystals

In this paper, we report the charge carrier recombination rate and spin coherence lifetimes in single crystals of two-dimensional (2D) Ruddlesden–Popper perovskites PEA 2 PbI 4 ·(MAPbI 3 ) n-1 (PEA, phenethylammonium; MA, methylammonium; n = 1, 2, 3, 4). Layer thickness-dependent charge carrier recombination rates are observed, with the fastest rates for n = 1 because of the large exciton binding energy, and the slowest rates are observed for n = 2. Room-temperature spin coherence times also show a nonmonotonic layer thickness dependence with an increasing spin coherence lifetime with increasing layer thickness from n = 1 to n = 4, followed by a decrease in lifetime from n = 4 to ∞. The longest coherence lifetime of ~7 ps is observed in the n = 4 sample. Our results are consistent with two contributions: Rashba splitting increases the spin coherence lifetime going from the n = ∞ to the layered systems, while phonon scattering, which increases for smaller layers, decreases the spin coherence lifetime. Finally, the interplay between these two factors contributes to the layer thickness dependence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First Observation of Low-Temperature Magnetic Transition in CuAgSe

In this Article, the temperature-dependent magnetic properties of CuAgSe pellet sintered from surfactant-free CuAgSe nanoparticles synthesized by a wet chemistry method were investigated in the temperature range of 4–300 K. A magnetic transition between diamagnetism and weak ferromagnetism is observed at around 60–70 K. The results from magnetic measurements under different machines/magnetic fields, room-temperature X-ray photoelectron spectroscopy, and temperature-dependent nuclear magnetic resonance all demonstrate that this magnetic transition is an intrinsic property rather than an effect of impurities. Combining these results with temperature-dependent neutron diffraction, the origin of the weak ferromagnetism is ascribed to a structural crossover-induced canted antiferromagnetism and possible deviation of Cu valence. In conclusion, the transition is strongly dependent on the sintering temperature and pressure, which could induce the structural phase transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chapter 6: Recent Advances in Perovskite Tandem Devices

Organic-inorganic halide perovskites have recently emerged as a new class of light absorbers in solar conversion applications. The power conversion efficiency of single-junction perovskite solar cells (PSCs) has already surpassed conventional polycrystalline thin-film solar cell technologies and is even projected to be competitive with single-crystalline solar cells. Along with the continued effort on further advancing single-junction PSC technology, many research groups have started to develop perovskite-based tandem devices with the ultimate goal to move beyond the Shockley-Queisser limit for single-junction devices. In this book chapter, we first discuss basic concepts and ideas for general tandem devices in photovoltaic (PV) and photo-electrochemical (PEC) applications, spectrum and current matching, and typical device architectures (monolithic vs. multi-terminal). We then focus on the advantages and the main challenges of using perovskite materials, both in tandem with existing PV materials and in all-perovskite tandem devices. Bandgap engineering is essential to achieve efficient perovskite tandem devices. We discuss several strategies of bandgap engineering through composition alloying as well as existing issues in both intrinsic material properties and material processing difficulties. A key component to tandem devices is the transparent interconnection layers/electrodes. We review and comment on some possible candidates of this interconnection layer. Finally, we review the current status and provide future prospective in this field by summarizing state-of-the-art perovskite tandem PV and PEC devices.

14 SOLAR ENERGY↗

Probing Perovskite Inhomogeneity beyond the Surface: TOF-SIMS Analysis of Halide Perovskite Photovoltaic Devices

Understanding the origins and evolution of inhomogeneity in halide perovskite solar cells appears to be a key to advancing the technology. Time-of-flight secondary-ion mass spectrometry (TOF-SIMS) is one of the few techniques that can obtain chemical information from all components of hybrid organic-inorganic perovskite photovoltaics in one dimension (standard depth profiling), two dimensions (high-resolution 100-nm imaging), as well as three dimensions (tomography combining high-resolution imaging with depth profiling). TOF-SIMS has been used to analyze perovskite photovoltaics made by a variety of methods, and the breadth of insight that can be gained from the technique is illustrated here including: cation uniformity (depth and lateral), changes in chemistry upon alternate processing, changes in chemistry upon degradation, and lateral distribution of additives that passivate grain boundaries. Using TOF-SIMS on multiple perovskite compositions, we show information regarding hybrid perovskite formation as well as inhomogeneity critical to device performance can be extracted providing one of the best proxies for understanding compositional changes resulting from degradation. Here, we also describe in detail the measurement artifacts and recommended best practices that enable unique insight regarding hybrid perovskite solar cell materials and devices.

14 SOLAR ENERGY↗

Split‐dose 4‐L polyethylene glycol regimen for patients with previous colorectal surgery in bowel preparation before colonoscopy: A randomized, controlled, single‐blind study

OBJECTIVE We aimed to investigate the efficacy of a split‐dose 4‐L polyethylene glycol (PEG) regimen for the quality of bowel preparation in Asian patients with previous colorectal surgery for colorectal cancer (CRC). METHODS This was a prospective, single‐center, randomized controlled, endoscopist‐blinded study. Patients with previous colorectal surgery for CRC were randomly allocated to a routine, morning‐only 2‐L PEG (2‐MO) group or a split‐dose 4‐L PEG (4‐SD) group. The primary outcome was a successful bowel preparation rate. Secondary outcomes were polyp detection rate (PDR), adenoma detection rate (ADR), patient compliance, satisfaction, tolerance, willingness to repeat the preparation and difficulty of the bowel preparation process. RESULTS In total, 187 patients were included (93 in the 2‐MO group, 94 in the 4‐SD group) in this study. The rate of successful bowel preparation in the 4‐SD group was higher than in the 2‐MO group (89.4% vs 66.7%, P < 0.001) in an intention‐to‐treat analysis according to the Aronchick score. Patients’ satisfaction with the bowel preparation process in the 4‐SD group was superior to that in the 2‐MO group (93.4% vs 82.2%, P = 0.021). No significant differences were detected in PDR, ADR, patient compliance, tolerance, willingness to repeat the preparation or difficulty of the bowel preparation process. CONCLUSIONS The 4‐SD PEG regimen was superior to a routine, morning‐only 2‐L PEG preparation for bowel preparation in an Asian population with previous colorectal surgery.

Liu, Zhu↗

Stable Formamidinium-Based Perovskite Solar Cells via In Situ Grain Encapsulation

Formamidinium (FA)-based lead iodide perovskites have emerged as the most promising light-absorber materials in the prevailing perovskite solar cells (PSCs). However, they suffer from the phase-instability issue in the ambient atmosphere, which is holding back the realization of the full potential of FA-based PSCs in the context of high efficiency and stability. Herein, the tetraethylorthosilicate hydrolysis process is integrated with the solution crystallization of FA-based perovskites, forming a new film structure with individual perovskite grains encapsulated by amorphous silica layers that are in situ formed at the nanoscale. The silica not only protects perovskite grains from the degradation but also enhances the charge-carrier dynamics of perovskite films. The underlying mechanism is discussed using a joint experiment-theory approach. Through this in situ grain encapsulation method, PSCs show an efficiency close to 20% with an impressive 97% retention after 1000-h storage under ambient conditions.

14 SOLAR ENERGY↗

Low-Cost, Efficient, and Durable H 2 Production by Photoelectrochemical Water Splitting with CuGa 3 Se 5 Photocathodes

Photoelectrochemical (PEC) water splitting is an elegant method of converting sunlight and water into H 2 fuel. To be commercially advantageous, PEC devices must become cheaper, more efficient, and much more durable. This work examines low-cost polycrystalline chalcopyrite films, which are successful as photovoltaic absorbers, for application as PEC absorbers. In particular, Cu-Ga-Se films with wide band gaps can be employed as top cell photocathodes in tandem devices as a realistic route to high efficiencies. In this report, we demonstrate that decreasing Cu/Ga composition from 0.66 to 0.31 in Cu-Ga-Se films increased the band gap from 1.67 to 1.86 eV and decreased saturated photocurrent density from 18 to 8 mA/cm 2 as measured by chopped-light current-voltage (CLIV) measurements in a 0.5 M sulfuric acid electrolyte. Buffer and catalyst surface treatments were not applied to the Cu-Ga-Se films, and they exhibited promising stability, evidenced by unchanged CLIV after 9 months of storage in air. Finally, films with Cu/Ga = 0.36 (approximately stoichiometric CuGa 3 Se 5 ) and 1.86 eV band gaps had exceptional durability and continuously split water for 17 days (~12 mA/cm 2 at -1 V vs RHE). This is equivalent to ~17 200 C/cm 2 , which is a world record for any polycrystalline PEC absorber. These results indicate that CuGa 3 Se 5 films are prime candidates for cheaply achieving efficient and durable PEC water splitting.

36 MATERIALS SCIENCE↗

Scalable fabrication of perovskite solar cells

Perovskite materials use earth-abundant elements, have low formation energies for deposition and are compatible with roll-to-roll and other high-volume manufacturing techniques. These features make perovskite solar cells (PSCs) suitable for terawatt-scale energy production with low production costs and low capital expenditure. Demonstrations of performance comparable to that of other thin-film photovoltaics (PVs) and improvements in laboratory-scale cell stability have recently made scale up of this PV technology an intense area of research focus. Here, we review recent progress and challenges in scaling up PSCs and related efforts to enable the terawatt-scale manufacturing and deployment of this PV technology. We discuss common device and module architectures, scalable deposition methods and progress in the scalable deposition of perovskite and charge-transport layers. We also provide an overview of device and module stability, module-level characterization techniques and techno-economic analyses of perovskite PV modules.

14 SOLAR ENERGY↗

Pyruvate dehydrogenase kinase 4 mediates lipogenesis and contributes to the pathogenesis of nonalcoholic steatohepatitis

Highlights: • The expression of PDK4 is increased in both NAFLD human and mice. • Pdk4 deficiency results in impaired glucose and lipid metabolism in the liver. • Pdk4 deficiency ameliorated hepatic steatosis in NASH mice. • Multiple hepatic signaling pathways are altered by Pdk4 deficiency. Nonalcoholic steatohepatitis (NASH) is a progressive disease and poses a high risk of severe liver damage. However, the pathogenesis of NASH is still unclear. Accumulation of lipid droplets and insulin resistance is the hallmark of NASH. Pyruvate dehydrogenase kinase isoenzyme 4 (PDK4) plays key role in glucose metabolism via regulating the activity of pyruvate dehydrogenase complex (PDC). Here, we demonstrated a novel of PDK4 in NASH by regulating hepatic steatosis and insulin signaling pathway in methionine and choline deficient (MCD) diet induced NASH model. Hepatic PDK4 levels were highly induced in human patients with NASH and MCD diet fed mice, as well as in hepatocytes treated with oleic acid. The glucose and lipid metabolism were impaired in Pdk4{sup −/−} mice. Pdk4 deficiency ameliorated the hepatic steatosis significantly in NASH mice. Pdk4{sup −/−}-MCD mice had reduced liver weights and triglyceride (TG) levels. And Pdk4 deficiency dramatically reduced the expression of genes related to fatty acid uptake, synthesis and gluconeogenesis. In addition, elevated phosphorylated AMPK (p-AMPK), p-SAPK/JNK and diminished p-ERK, p-P38, p-Akt and p-mTOR/p-4EBP1 proteins were observed. In conclusion, our data indicated that PDK4 potentially contributes to the hepatic steatosis in NASH via regulating several signaling pathway and PDK4 may be a new therapeutic strategy against NAFLD.

60 APPLIED LIFE SCIENCES↗

Angiotensin II type 1 receptor-associated protein regulates carotid intimal hyperplasia through controlling apoptosis of vascular smooth muscle cells

Highlights: • ATRAP as a negative regulator of AT1 receptor plays an inhibitory role in VSMCs proliferation both in vitro and in vivo. • ATRAP triggers the marked apoptosis of VSMCs in balloon-injuried carotid arteries and depresses neointimal formation. • ATRAP induces VSMCs apoptosis through the influence of the PI3K/Akt signaling pathway. Intimal hyperplasia is the main cause of restenosis after carotid artery injury, and the underlying mechanism involves the proliferation and migration of vascular smooth muscle cells (VSMCs). Angiotensin II Type 1 Receptor-Associated Protein (ATRAP) has been reported to withstand intimal hyperplasia by inhibiting VSMCs proliferation and migration; however, whether the beneficial effect of ATRAP associates with VSMCs apoptosis remains unclarified. We demonstrated that the adenoviral-mediated overexpression of ATRAP induced VSMC apoptosis, alleviating the balloon injury-induced neointima formation in rats. Under the condition of Angiotensin-II stimulation, ATRAP overexpression induced the apoptosis of rat VSMCs by depressing the PI3K-Akt signaling; whereas up-regulation of Akt by PTEN inhibitor abolished the apoptotic death. Thus, ATRAP regulates carotid intimal hyperplasia through controlling the PI3K-Akt signal-mediated VSMCs apoptosis.

60 APPLIED LIFE SCIENCES↗

Highly Efficient Perovskite Solar Modules by Scalable Fabrication and Interconnection Optimization

To push perovskite solar cell (PSC) technology toward practical applications, large-area perovskite solar modules with multiple subcells need to be developed by fully scalable deposition approaches. Here, we demonstrate a deposition scheme for perovskite module fabrication with spray coating of a TiO2 electron transport layer (ETL) and blade coating of both a perovskite absorber layer and a spiro-OMeTAD-based hole transport layer (HTL). The TiO2 ETL remaining in the interconnection between subcells significantly affects the module performance. Reducing the TiO2 thickness changes the interconnection contact from a Schottky diode to ohmic behavior. Owing to interconnection resistance reduction, the perovskite modules with a 10 nm TiO2 layer show enhanced performance mainly associated with an improved fill factor. Finally, we demonstrate a four-cell MA0.7FA0.3PbI3 perovskite module with a stabilized power conversion efficiency (PCE) of 15.6% measured from an aperture area of ~10.36 cm2, corresponding to an active-area module PCE of 17.9% with a geometric fill factor of ~87.3%.

14 SOLAR ENERGY↗

Quantitative analysis of time-resolved microwave conductivity data

Flash-photolysis time-resolved microwave conductivity (fp-TRMC) is a versatile, highly sensitive technique for studying the complex photoconductivity of solution, solid, and gas-phase samples. The purpose of this paper is to provide a standard reference work for experimentalists interested in using microwave conductivity methods to study functional electronic materials, describing how to conduct and calibrate these experiments in order to obtain quantitative results. The main focus of the paper is on calculating the calibration factor, K, which is used to connect the measured change in microwave power absorption to the conductance of the sample. We describe the standard analytical formulae that have been used in the past, and compare them to numerical simulations. This comparison shows that the most widely used analytical analysis of fp-TRMC data systematically under-estimates the transient conductivity by ~60%. We suggest a more accurate semi-empirical way of calibrating these experiments. However, we emphasize that the full numerical calculation is necessary to quantify both transient and steady-state conductance for arbitrary sample properties and geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of non-stoichiometric solution chemistry on improving the performance of wide-bandgap perovskite solar cells

A high-efficiency wide-bandgap (WBG) perovskite solar cell is critical for developing perovskite-related (e.g., all-perovskite, perovskite/Si, or perovskite/Cu(In,Ga)Se 2 ) tandem devices. Here, we demonstrate the use of non-stoichiometric precursor chemistry with excess methylammonium halides (MAX; X = I, Br, or Cl) for preparing high-quality ~1.75-eV FA 0.83 Cs 0.17 Pb(I 0.6 Br 0.4 ) 3 perovskite solar cells. Among various methylammonium halides, using excess MABr in the non-stoichiometric precursor exhibits the strongest effect on improving perovskite crystallographic properties and device characteristics without affecting the perovskite composition. In contrast, using excess MAI significantly reduces the bandgap of perovskite due to the replacement of Br with I. Using 40% excess MABr, we demonstrate a single-junction WBG perovskite solar cell with stabilized efficiency of 16.4%. We further demonstrate a 20.3%-efficient 4-terminal tandem device by using a 14.7%-efficient semi-transparent WBG perovskite top cell and an 18.6%-efficient unfiltered (5.6%-efficient filtered) Si bottom cell.

14 SOLAR ENERGY↗