Engineering Papers⌕ Search

Engineering topics

Li, Zhao

Publications and source records attributed to Li, Zhao.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Machine learning using host/guest energy histograms to predict adsorption in metal–organic frameworks: Application to short alkanes and Xe/Kr mixtures

A machine learning (ML) methodology that uses a histogram of interaction energies has been applied to predict gas adsorption in metal–organic frameworks (MOFs) using results from atomistic grand canonical Monte Carlo (GCMC) simulations as training and test data. In this work, the method is first extended to binary mixtures of spherical species, in particular, Xe and Kr. In addition, it is shown that single-component adsorption of ethane and propane can be predicted in good agreement with GCMC simulation using a histogram of the adsorption energies felt by a methyl probe in conjunction with the random forest ML method. Here, the results for propane can be improved by including a small number of MOF textural properties as descriptors. We also discuss the most significant features, which provides physical insight into the most beneficial adsorption energy sites for a given application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Solar Energetic Proton Access to the Inner Magnetosphere During the September 7–8, 2017 Event

Here, the access of solar energetic protons into the inner magnetosphere on September 7–8, 2017 is investigated by following reversed proton trajectories to compute the proton cutoff energy using the Dartmouth geomagnetic cutoff code (Kress et al., 2010, https://doi.org/10.1029/2009sw000488). The cutoff energies for protons coming from the west and east direction, the minimum and maximum cutoff energy respectively, are calculated every 5 min along the orbit of Van Allen Probes using TS07 and the Lyon-Fedder-Mobarry (LFM) MHD magnetic field model. The result shows that the cutoff energy increases significantly as the radial distance decreases, and that the cutoff energy decreases with the building up of the ring current during magnetic storms. Solar wind dynamic pressure also affects cutoff suppression (Kress et al., 2004, https://doi.org/10.1029/2003gl018599). The LFM-RCM model shows stronger suppression of cutoff energy than TS07 during strong solar wind driving conditions. The simulation result is compared with proton flux measurements, showing consistent variation of the cutoff location during the September 7–8, 2017 geomagnetic storm.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Stable, high-performance, dendrite-free, seawater-based aqueous batteries

Metal anode instability, including dendrite growth, metal corrosion, and hetero-ions interference, occurring at the electrolyte/electrode interface of aqueous batteries, are among the most critical issues hindering their widespread use in energy storage. Herein, a universal strategy is proposed to overcome the anode instability issues by rationally designing alloyed materials, using Zn-M alloys as model systems (M = Mn and other transition metals). An in-situ optical visualization coupled with finite element analysis is utilized to mimic actual electrochemical environments analogous to the actual aqueous batteries and analyze the complex electrochemical behaviors. The Zn-Mn alloy anodes achieved stability over thousands of cycles even under harsh electrochemical conditions, including testing in seawater-based aqueous electrolytes and using a high current density of 80 mA cm –2 . The proposed design strategy and the in-situ visualization protocol for the observation of dendrite growth set up a new milestone in developing durable electrodes for aqueous batteries and beyond.

25 ENERGY STORAGE↗
DOE OSTI2020

Porous FeCo Glassy Alloy as Bifunctional Support for High-Performance Zn-Air Battery

Zn-air battery (ZAB) is attracting increasing attention due to its high safety and performance. However, the practical application of ZAB relies heavily on developing durable support materials to replace conventional carbon supports which have unrecoverable corrosion issues, severely jeopardizing ZAB performance. Herein, a novel porous FeCo glassy alloy was developed as bifunctional catalytic support for ZAB. Specifically, the conducting skeleton of the porous glassy alloy was used to stabilize oxygen reduction cocatalysts, and more importantly, the FeCo served as the primary phase for oxygen evolution. To prove the concept of catalytic glassy alloy support, ultra-small Pd nanoparticles were anchored, as oxygen reduction active sites, on the porous FeCo (noted as Pd/FeCo) for ZAB. The Pd/FeCo exhibited a significantly improved electrocatalytic activity for oxygen reduction (a half-wave potential of 0.85 V) and oxygen evolution (a potential of 1.55 V to reach 10 mA cm –2 ) in the alkaline media. When used in the ZAB, the Pd/FeCo delivered an output power density of 117 mW cm –2 and outstanding cycling stability for over 200 h (400 cycles), surpassing the conventional carbon-supported Pt/C+IrO 2 catalysts. Such an integrated design of combining highly active components with porous architecture provides a new strategy to develop novel nanostructured electrocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Boosting alkaline hydrogen evolution: the dominating role of interior modification in surface electrocatalysis

The alkaline hydrogen evolution reaction (A-HER) holds great promise for clean hydrogen fuel generation but its practical utilization is severely hindered by the sluggish kinetics for water dissociation in alkaline solutions. Traditional ways to improve the electrochemical kinetics for A-HER catalysts have been focusing on surface modification, which still can not meet the demanding requirements for practical water electrolysis because of catalyst surface deactivation. In this work, we report an interior modification strategy to significantly boost the A-HER performance. Specifically, a trace amount of Pt was doped in the interior Co 2 P (Pt–Co 2 P) to introduce a stronger dopant–host interaction than that of the surface-modified catalyst. Consequently, the local chemical state and electronic structure of the catalysts were adjusted to improve the electron mobility and reduce the energy barriers for hydrogen adsorption and H–H bond formation. As a proof-of-concept, the interior-modified Pt–Co 2 P shows a reduced onset potential at near-zero volts for the A-HER, low overpotentials of 2 mV and 58 mV to achieve 10 and 100 mA cm –2 , and excellent durability for long-term utilization. The interior-modified Pt–Co 2 P delivers superior A-HER performance to Pt/C and other state-of-the-art electrocatalysts. This work will open a new avenue for A-HER catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Fully R2R-Printed Carbon-Nanotube-Based Limitless Length of Flexible Active-Matrix for Electrophoretic Display Application

A limitless-length flexible active-matrix implies that virtually any surface can be rendered into an interactive medium when laminated with electrophoretic or organic light-emitting diode sheets. However, performance, cost, and size limitations of current fabrication technologies and semiconducting materials, typically utilized in thin film transistor (TFT) active matrices (TFT-AMs), have hindered progress, thus preventing the realization of fully printed TFT-AMs on a plastic roll. Here, a new high-purity semiconducting single-walled carbon nanotube (s-SWCNT) ink is prepared by first isolating 99.9% pure s-SWCNTs via conjugated polymer extraction, and then utilizing a ligand-exchange method to formulate a novel hydrophilic gravure-compatible semiconducting ink. Based on the s-SWCNT ink, a fully additive manufacturing process using roll-to-roll (R2R) gravure printing enables the fabrication of a flexible TFT-AM, overcoming performance, cost, and size limitations. TFT-AMs with 10 to 40 PPI resolution where average mobility of 0.23 ± 0.12 cm 2 V –1 s –1 , average on–off ratio of 10 4.1 , and threshold voltage variation of ±13% are attained. As a proof of concept, an inexpensive and flexible electrophoretic display is demonstrated by simply laminating an electrophoretic sheet onto the R2R gravure-printed s-SWCNT-based TFT-AM.

36 MATERIALS SCIENCE↗
NASA NTRS2020

An Introduction to the NASA GMAO Coupled Atmosphere-Ocean System - GEOS-S2S Version 3

Recently NASA's Global Modeling and Assimilation Office (GMAO) has developed a new Subseasonal to Seasonal Prediction system Version 3 (GEOS-S2S-3). This upgrade replaces the GEOS-S2S-2 which is NASA's current contribution to the North American Multi-Model Experiment seasonal prediction project (Kirtman et al., 2014). The main improvements for our S2S-3 system include 1) a higher resolution MOM5 (Griffies et al., 2005) ocean model (now 0.25o x 0.25o x 50 layers), 2) an improved atmospheric/ocean interface layer (Akella and Suarez, 2018), and 3) assimilation of a long-track satellite salinity into the ocean model (Hackert et al, 2019). Atmospheric forcing is provided by the NASA MERRA-2 reanalysis (Gelaro et al., 2017). Initialization for the ocean relies on the GMAO ocean reanalysis system which assimilates all available in situ temperature and salinity, satellite sea surface salinity, and sea level using the Local Ensemble Transform Kalman Filter (LETKF) implementation of (Penny et al., 2013) on a 5 day assimilation cycle with 20 fixed ensemble members.In this presentation, we will authenticate our new S2S-3 ocean reanalysis using standard GODAE validation metrics. For example, we will compare gridded fields of mean and standard deviation of the ocean reanalysis versus observed fields. We will show correlation/RMS of model versus observations and temperature and salinity mean profiles for the various basins and latitude bands. Basin-scale volume transports, such as the Atlantic Meridional Overturning Circulation and the Indonesian Throughflow will be validated. Equatorial ocean waves will be compared by decomposing sea level into Kelvin and Rossby components. For each of these metrics, we plan to validate the results and then compare our new S2S-3 against the current production version, S2S-2. Finally, we will compare 9-month seasonal forecasts initialized from these two systems for the tropical Pacific NINO3.4 region over the period 1981-present.

Molod, Andrea↗
NASA NTRS2020

GEOS S2S Version 3: The New NASA/GMAO High Resolution Seasonal Prediction System

The NASA/Goddard Global Modeling and Assimilation Office (GMAO) released Version 2 of the Subseasonal to Seasonal (GEOS-S2S) forecast system in the fall of 2017, and it has been producing near-real time subseasonal to seasonal forecasts and a weakly coupled atmosphere-ocean data assimilation record since then. A new version of the coupled modeling and analysis system (Version 3) was released by the GMAO at the end of 2019. The new version runs at higher oceanic resolution than the previous (approximately 1/2 degree for the atmosphere, 1/4 degree for the ocean), and includes interactive earth system model components not typically present in seasonal prediction systems (two moment cloud microphysics for aerosol indirect effect and an interactive aerosol model). The weakly coupled atmosphere-ocean data assimilation system now includes assimilation of sea surface salinity, that has been shown to result in improved ocean mixed layer simulation and ENSO prediction skill.

Molod, Andrea↗
NASA NTRS2019

Near Real-Time Sub/Seasonal Prediction of Aerosol and Air Quality at the NASA Global Modeling and Assimilation Office

Version 2 of the coupled modeling and analysis system used to produce near real time subseasonal to seasonal forecasts was released almost two years ago by the NASA/Goddard Global Modeling and Assimilation Office. The model runs at approximately 1/2 degree globally in the atmosphere and ocean, contains a realistic description of the cryosphere, and includes an interactive aerosol model. The data assimilation used to produce initial conditions is weakly coupled, in which the atmosphere-only assimilated state is coupled to an ocean data assimilation system using a Local Ensemble Transform Kalman Filter. Results of aerosol-derived air quality (Particulate Matter) from an extensive series of retrospective forecasts will be shown, with particular focus on the continental United States and eastern Asia. In addition, under some circumstances, the interactive aerosol is shown to improve seasonal time scale prediction skill. Plans for a future version of the system with predicted biomass burning from fires will also be discussed.

Molod, Andrea↗
DOE OSTI2019

Stabilizing atomic Pt with trapped interstitial F in alloyed PtCo nanosheets for high-performance zinc-air batteries

Recently, considerable attention has been paid to the stabilization of atomic platinum (Pt) catalysts on desirable supports in order to reduce Pt consumption, improve the catalyst stability, and thereafter enhance the catalyst performance in renewable energy devices such as fuel cells and zinc-air batteries (ZABs). Herein, we rationally designed a novel strategy to stabilize atomic Pt catalysts in alloyed platinum cobalt (PtCo) nanosheets with trapped interstitial fluorine (SA-PtCoF) for ZABs. The trapped interstitial F atoms in the PtCoF matrix induce lattice distortion resulting in weakening of the Pt–Co bond, which is the driving force to form atomic Pt. As a result, the onset potentials of SA-PtCoF are 0.95 V and 1.50 V for the oxygen reduction and evolution reactions (ORR and OER), respectively, superior to commercial Pt/C@RuO 2 . When used in ZABs, the designed SA-PtCoF can afford a peak power density of 125 mW cm -2 with a specific capacity of 808 mA h g Zn -1 and excellent cyclability over 240 h, surpassing the state-of-the-art catalysts.

25 ENERGY STORAGE↗
NASA NTRS2019

Near Real-Time Sub/Seasonal Prediction of Aerosol at NASA Global Modeling and Assimilation Office

A new version of the coupled modeling and analysis system used to produce near real time subseasonal to seasonal forecasts was released over a year ago by the NASA/Goddard Global Modeling and Assimilation Office. The model runs at approximately 1/2 degree globally in the atmosphere and ocean, contains a realistic description of the cryosphere, and includes an interactive aerosol model. The data assimilation used to produce initial conditions is weakly coupled, in which the atmosphere-only assimilated state is coupled to an ocean data assimilation system using a Local Ensemble Transform Kalman Filter. Here will briefly describe the new system, and show results of aerosol-derived air quality from an extensive series of retrospective forecasts. The interactive aerosol is shown to improve seasonal time scale prediction skill during some "forecasts of oppurtunity". Plans for a future version of the system with predicted biomass burning from fires will also be discussed.

Molod, Andrea M.↗
DOE OSTI2019

Investigation of Solar Proton Access Into the Inner Magnetosphere on 11 September 2017

Here, access of solar energetic protons to the inner magnetosphere on 11 September 2017 is investigated by computing the reverse particle trajectories with the Dartmouth geomagnetic cutoff code (Kress et al., 2010). The maximum and minimum cutoff rigidity at each point along the orbit of Van Allen Probe A is numerically computed by extending the code to calculate cutoff rigidity for particles coming from arbitrary direction. Pulse height analyzed (PHA) data have the advantage of providing individual particle energies and effectively excluding background high-energy proton contamination. This technique is adopted to study the cutoff locations for solar protons with different energy. The results demonstrate that cutoff latitude is lower for solar protons with higher energy, consistent with low-altitude vertical cutoffs. Both the observations and numerical results show that proton access into the inner magnetosphere depends strongly on angle between particle arrival direction and magnetic west. Finally, the numerical result is approximately consistent with the observation that the energy of almost all solar protons stays above the minimum cutoff rigidity.

58 GEOSCIENCES↗
DOE OSTI2019

Anionic Single-Atom Catalysts for CO Oxidation: Support-Independent Activity at Low Temperatures

We study here 14 atomically dispersed transition metals on halite-type oxides (MeO, Me = Fe, Mg, Mn, and Ni) using periodic density functional theory calculations and probe structure and activity toward CO oxidation for a subset of these systems experimentally. Pd and Pt can form stable negatively charged species upon binding to oxygen vacancies; the magnitude of the metal atom binding energy depends on the O vacancy formation energies of the supporting metal oxide and the lattice match between transition metal and support. The resulting oxide-supported single-atom systems catalyze CO oxidation by molecularly adsorbed O 2 with intrinsic barriers as low as 36 kJ/mol for Pt/MnO x (001). This high activity stems from the single sites’ ability to stabilize surface superoxide species. Furthermore, intrinsic barriers were found to depend primarily on the identity of the transition metal and to be nearly independent of the support identity. However, O 2 may heal the oxygen vacancy, which leads to catalyst deactivation. Catalyst deactivation by oxygen can be suppressed by using a more reducible support such as FeO(001) or MnO(001).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2018

GEOS S2S-2_1: The GMAO High Resolution Seasonal Prediction System

A new version of the coupled modeling and analysis system used to produce near real time subseasonal to seasonal forecasts was recently released by the NASA/Goddard Global Modeling and Assimilation Office. The new version runs at higher atmospheric resolution than the previous, (approximately 1/2 degree globally), contains a substantially improved model description of the cryosphere, and includes additional interactive earth system model components (aerosol model). In addition, the Ocean data assimilation system has been replaced with a Local Ensemble Transform Kalman Filter, and now includes the assimilation of along-track sea surface height. Here will describe the new system, along with the plans for the future (GEOS S2S-3_0) which will include a higher resolution ocean model and more interactive earth system model components (interactive vegetation, biomass burning from fires). We will also present results from a series of retrospective seasonal forecasts. Results show significant improvements in surface temperatures over much of the northern hemisphere and a much improved prediction of sea ice extent in both hemispheres. Analysis of the ensemble spread shows improvements relative to the previous system, including generally better reliability. The precipitation forecast skill is comparable to previous S2S systems, and the only tradeoff is an increased "double ITCZ", which is expected as we go to higher atmospheric resolution.

Molod, Andrea↗
DOE OSTI2018

Non-uniform seasonal warming regulates vegetation greening and atmospheric CO 2 amplification over northern lands

The enhanced vegetation growth by climate warming plays a pivotal role in amplifying the seasonal cycle of atmospheric CO 2 at northern lands (>50° N) since 1960s. However, the correlation between vegetation growth, temperature and seasonal amplitude of atmospheric CO 2 concentration have become elusive with the slowed increasing trend of vegetation growth and weakened temperature control on CO 2 uptake since late 1990s. Here, based on in situ atmospheric CO 2 concentration records from the Barrow observatory site, we found a slowdown in the increasing trend of the atmospheric CO 2 amplitude from 1990s to mid-2000s. This phenomenon was associated with the paused decrease in the minimum CO 2 concentration ([CO 2 ]min), which was significantly correlated with the slowdown of vegetation greening and growing-season length extension. We then showed that both the vegetation greenness and growing-season length were positively correlated with spring but not autumn temperature over the northern lands. Furthermore, such asymmetric dependences of vegetation growth upon spring and autumn temperature cannot be captured by the state-of-art terrestrial biosphere models. These findings indicate that the responses of vegetation growth to spring and autumn warming are asymmetric, and highlight the need of improving autumn phenology in the models for predicting seasonal cycle of atmospheric CO 2 concentration.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Enhanced peak growth of global vegetation and its key mechanisms

The annual peak growth of vegetation is critical in characterizing the capacity of terrestrial ecosystem productivity and shaping the seasonality of atmospheric CO 2 concentrations. The recent greening of global lands suggests an increasing trend of terrestrial vegetation growth, but whether or not the peak growth has been globally enhanced still remains unclear. Here, we use two global datasets of gross primary productivity (GPP) and a satellite-derived Normalized Difference Vegetation Index (NDVI) to characterize recent changes in annual peak vegetation growth (that is, GPP max and NDVI max ). We demonstrate that the peak in the growth of global vegetation has been linearly increasing during the past three decades. About 65% of the NDVI max variation is evenly explained by expanding croplands (21%), rising CO 2 (22%) and intensifying nitrogen deposition (22%). The contribution of expanding croplands to the peak growth trend is substantiated by measurements from eddy-flux towers, sun-induced chlorophyll fluorescence and a global database of plant traits, all of which show that croplands have a higher photosynthetic capacity than other vegetation types. The large contribution of CO 2 is also supported by a meta-analysis of 466 manipulative experiments and 15 terrestrial biosphere models. Moreover, we show that the contribution of GPP max to the change in annual GPP is less in the tropics than in other regions. These multiple lines of evidence reveal an increasing trend in the peak growth of global vegetation. These results draw attention to the vital roles of agricultural intensification and atmospheric changes in reshaping the seasonality of global vegetation growth.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2018

NASA GMAO GEOS S2S Prediction System: Metrics, Post-Processing and Products

In this presentation we present an overview of the GMAO Sub-Seasonal and Seasonal Prediction System, current users and products, and methods for validation and evaluation of the system. Methods for evaluation include baseline evaluations metrics, the ability to simulate key modes of variability, and evaluation of new development areas.

Molod, Andrea M.↗