Engineering Papers⌕ Search

Engineering topics

Li, Yi

Publications and source records attributed to Li, Yi.

At least 109 records · Page 6

Mesenchymal stem cells in combination with low-dose rapamycin significantly prolong islet allograft survival through induction of regulatory T cells

Highlights: • MSCs alone are not able to promote allogeneic islet engraft and Rapamycin has detrimental effects on islet engraftment. • MSCs combined with low-dose Rapamycin significantly prolonged the survival and enhanced the function of islet allografts. • The protective effect of combination therapy is associated with induced expansion of regulatory T cells in vivo. • The combination therapy leads to profound suppression of alloreactive response to donor specific antigen. We previously demonstrated the protective effect of MSCs in an adaptive transfer mouse model. However, their therapeutic potential in an allogeneic immunocompetent setting mimicking clinical context of islet transplantation remained unknown. The aim of this study was to determine whether MSCs therapy, either by itself, or combined with Rapamycin could benefit the allograft survival of fully MHC-mismatched mouse islet transplant. Combination therapy of MSCs and low-dose Rapamycin significantly prolonged the survival of islet allografts, whereas treatment of MSCs, or Rapamycin alone, had no impact. Interestingly, this protective effect was associated with an induced expansion of regulatory T cells in islet grafts and draining lymph nodes, a skewed T-cell differentiation toward immunotolerance, and a profound suppression of alloreactivity against donor antigen. Our study suggests that a combination therapy of MSCs and low-dose Rapamycin can prolong the survival and preserve the function of islet allograft in the MHC-mismatched mouse model of islet transplantation.

60 APPLIED LIFE SCIENCES↗

PBX1 promotes the cell proliferation via JAK2/STAT3 signaling in clear cell renal carcinoma

Highlights: • PBX1 is significantly upregulated in ccRCC tissues and cells, and associated with the overall survival in patients with ccRCC. • PBX1 mediates cell proliferation via JAK2/STAT3 signaling in ccRCC. • PBX1 acts as an oncogene in ccRCC by regulating the activation of JAK2/STAT3 signaling. PBX1 was abnormally overexpressed and its intracellular localization was found to be frequently amplified in many types of cancer, including renal clear cell carcinoma. PBX1 displays oncogenic activity in several different types of cells, but little is known about how signaling pathways are altered, and the function of PBX1 in renal clear cell carcinoma has not been well investigated. In this study, we demonstrate that the expression of PBX1 was significantly upregulated in 30 pairs of human tissues compared to adjacent normal tissues and the overall survival rate of PBX1-high group was significantly worse than that of PBX1-low group. Furthermore, JAK2 expression is significantly correlated to PBX1 expression in human clinical specimen and PBX1 knockdown inhibits STAT3 phosphorylation and reduced transcription of STAT3 target genes Cyclin D1. More interestingly, PBX1 knockdown inhibits ccRCC cell viability, proliferation and cell cycle progression in vivo and in vitro. Thus, our results demonstrate that PBX1 plays an oncogenic role in ccRCC via JAK2/STAT3 pathway and indicate its potential application for the treatment of human ccRCC in future.

60 APPLIED LIFE SCIENCES↗

Fabrication of hollow carbonaceous nanospheres and their applications in lithium-ion batteries

Highlights: • SiO{sub 2}@SiO{sub 2}/RF resin composite nanospheres are prepared via a dual-templating method. • Hollow carbon nanospheres with large surface area are obtained after carbonization. • Hollow C/SiC composite nanospheres are produced after magnesiothermic reduction. • The carbonaceous nanospheres show superior electrochemical performance. • SiC nanomaterials can serve as candidate for LIBs anode materials. - Abstract: This paper presents a facile method for preparing hollow carbonaceous nanospheres for use in advanced Li-ion batteries (LIBs). Core–shell-structured silica@resin/silica nanosphere composites were used as the starting material. Hollow carbon nanospheres with a high specific surface area, i.e., 1389 m{sup 2} g{sup −1}, and C/SiC composite nanospheres composed of 24.4 wt.% amorphous carbon and 75.6 wt.% cubic β-SiC were obtained. Electrochemical measurements showed that the hollow carbon nanospheres delivered a reversible capacity of 553.5 mA h g{sup −1} after 100 cycles, which is higher than the theoretical capacity of graphite. A C/SiC composite nanosphere electrode gave a reversible capacity of 296 mA h g{sup −1} after 500 cycles. The results show that these nanospheres are promising candidates for use in LIB anodes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Stochastic reconstruction and microstructure modeling of SMC chopped fiber composites

Here, to establish an integrated Processing-Microstructure-Property workflow for the prediction of material behaviors, this paper presents a new stochastic pseudo-3D microstructure reconstruction method for Sheet Molding Compounds (SMC) chopped fiber composites. The proposed method captures the bi-level microstructural features of SMC composites. At the higher level, a Voronoi diagram-based algorithm is developed to reconstruct the unique substructure features of SMC fiber tows. The geometry of Voronoi cells is adjusted by a Simulated Annealing (SA) algorithm to match the geometrical statistics of the real fiber tows. At the lower level, the algorithm assigns fiber orientation to each Voronoi cell (which represents a fiber tow). The fiber orientation angles are recovered from a statistical fiber orientation tensor. The proposed method is employed to establish a multi-layer pseudo-3D SMC Representative Volume Element (RVE) model for Finite Element Analysis (FEA) of SMC microstructure. This model enables the prediction of mechanical properties based on the material processing information (e.g. fiber orientation tensor obtained from compression molding simulation), and the microstructure information obtained from microscopic imaging for an SMC composite. Lastly, the predicted properties are successfully validated by experimental tensile tests.

36 MATERIALS SCIENCE↗

Full-length RPB1 is required in two-step shoot regeneration

Highlights: • Mutations in RPB1 result in defects in callus formation in Arabidopsis. • Auxin gradient formation is disturbed in RPB1 mutants. • The frequency of shoot regeneration upon SIM is repressed in RPB1 mutants. • The cytokinin response receded during shoot regeneration. Regeneration is a complicated progress in plants and animals. Most multicellular organisms can regenerate new tissue when wounded, and plants excel most animals in their ability to regenerate whole new growth module from adult tissues. Regeneration in Arabidopsis includes two steps. Firstly, the explants from differentiated plant tissues such as roots or hypocotyls are induced to generate callus, then the shoots regenerate upon the callus. The phytohormone auxin and cytokinin play important parts in this process. And genes related to auxin and cytokinin siganls involved in the regeneration have been studied widely. As we reported before, in Arabidopsis the full-length CTD of RNA Polymerase II's largest subunit RPB1 is necessary in keeping normal cell cycling and maintaining stem cell niches. Here, we report that the mutants of card1s have significant defects in the regeneration progress both in the induction of callus and the formation of shoot. All the results further proved the importance of intact RPB1 from a distinctive perspective.

60 APPLIED LIFE SCIENCES↗

Magnetic Field Enhanced Superconductivity in Epitaxial Thin Film WTe 2

In conventional superconductors an external magnetic field generally suppresses superconductivity. This results from a simple thermodynamic competition of the superconducting and magnetic free energies. In this study, we report the unconventional features in the superconducting epitaxial thin film tungsten telluride (WTe 2 ). Measuring the electrical transport properties of Molecular Beam Epitaxy (MBE) grown WTe 2 thin films with a high precision rotation stage, we map the upper critical field H c2 at different temperatures T. We observe the superconducting transition temperature T c is enhanced by in-plane magnetic fields. The upper critical field H c2 is observed to establish an unconventional non-monotonic dependence on temperature. We suggest that this unconventional feature is due to the lifting of inversion symmetry, which leads to the enhancement of Hc 2 in Ising superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MnSb 2 S 4 Monolayer as an Anode Material for Metal-Ion Batteries

Here, we present density functional calculations showing that monolayer MnSb 2 S 4 is promising as an anode material for Li-, Na-, and Mg-ion batteries, and that the adsorption of Zn or Al atoms on the surface of MnSb 2 S 4 monolayer is not energetically favorable. The calculations show electron transfer from Li, Na, or Mg to the empty orbitals of nearby Sb and S atoms. The calculations indicate that an adsorption mechanism is followed by a conversion mechanism during charging, and the storage capacities can reach as high as 879 mA h/g for Li, Na, and Mg. The most favorable diffusion path for Li, Na, and Mg on the surface of MnSb2S4 monolayer is along the b direction; the lowest diffusion barriers for one Li, Na, and Mg are 0.18, 0.10, 0.32 eV, respectively. Good charge–discharge rates can be expected for the MnSb 2 S 4 monolayer when it is used as an electrode for Li-, Na-, and Mg-ion batteries.

25 ENERGY STORAGE↗

MicroRNA-425 facilitates pathogenic Th17 cell differentiation by targeting forkhead box O1 (Foxo1) and is associated with inflammatory bowel disease

Highlights: • MiR-425 expression is significantly increased in patients with IBD. • MiR-425 promotes pathogenic Th17 cell differentiation. • Foxo1 is a novel target of miR-425. • In vivo inhibition of miR-425 alleviates TNBS-induced colitis in mice. Inflammatory bowel disease (IBD) is a chronic autoimmune disease, and its pathogenesis remains mostly unknown. MicroRNAs (miRs) has drawn much attention as a crucial regulator of autoimmune diseases. In this study, we demonstrated, for the first time, that miR-425 was significantly up-regulated in peripheral blood mononuclear cells (PBMC) and mucosa of patients with IBD. In note, T helper (Th) 17 cells were found to be the major source of miR-425 expression. Using gain-of-function approaches, we demonstrated that miR-425 could facilitate the differentiation of CD4{sup +} T cells into Th17 lineage. In addition, forkhead box O1 (Foxo1) was identified as a novel target gene of miR-425, which was able to inhibit Th17 cell differentiation, and it was observed to be markedly decreased in PBMC and mucosa of patients with IBD. Notably, in vivo inhibition of miR-425 significantly alleviated the disease severity of TNBS-induced colitis in mice, with down-regulated levels of IL-17A. Our data reveal a novel mechanism in which the elevated miR-425 in IBD mediates pathogenic Th17 cell generation through down-regulation of Foxo1. In vivo blockade of miR-425 may serve as a novel therapeutic approach in the treatment of IBD.

60 APPLIED LIFE SCIENCES↗

Targeting ALDH2 with disulfiram/copper reverses the resistance of cancer cells to microtubule inhibitors

Highlights: • DSF/Cu reversed the microtubule inhibitor resistance in cancer cells. • DSF/Cu abolished the CSC characteristics of microtubule inhibitor resistant cancer cells. • ALDH2 played a crucial role in the development of microtubule inhibitor resistance. • DSF/Cu reduced ALDH2 expression in vitro and in vivo. Disulfiram (DSF) in combination with copper (Cu) has been reported to override drug resistance in cancer cells, and DSF combined with chemotherapy based on the microtubule inhibitor vinorelbine appears to prolong survival in non-small cell lung cancer patients. Here, we investigated the mechanisms underlying these findings. DSF/Cu reversed the microtubule inhibitor resistance in A549/Taxol and KB/VCR cells in vitro, and had anti-tumor effects in A549/Taxol and KB/VCR xenograft mice. DSF/Cu and DSF reduced the cancer stem cell (CSC) characteristics of drug-resistant A549/Taxol and KB/VCR cells, including sphere formation, colony generation and migration, and DSF/Cu was more effective than DSF alone. DSF/Cu also decreased the aldehyde dehydrogenase (ALDH) activity and the expression of P-gp and stem cell transcription factors in A549/Taxol and KB/VCR cells. Knockdown of ALDH2 attenuated the CSC characteristics of resistant cancer cells and enhanced their sensitivity to Taxol or VCR. Importantly, DSF/Cu treatment inhibited the expression of ALDH2 in vitro and in vivo. Our findings suggest that DSF/Cu reverses microtubule inhibitor resistance in cancer cells by suppressing ALDH2 expression, and Cu improves the activity of DSF.

60 APPLIED LIFE SCIENCES↗

Numerical modeling study of a man-made low-permeability barrier for the compressed air energy storage in high-permeability aquifers

Compressed air energy storage (CAES) is a grid-scale energy storage technology for intermittent energy, as proven by the decades-long successful operation of two existing compressed air energy storage in cavern (CAESC) power plants. Because of the limited availability of salt domes appropriate for CAESC, the more widely available aquifers (compressed air energy storage in aquifers, CAESA) have recently attracted considerable attention as candidates for CAES. An ideal aquifer for CAESA is highly permeable around the well to facilitate easy injection and withdrawal of air, but the high-permeability region is surrounded by low-permeability zones to minimize the loss of injected air and decrease in energy efficiency. However, such ideal geological structures are not always available in nature. Therefore, the potential of creating man-made low-permeability barrier in high-permeability aquifers is very interesting. In this paper, we investigate the feasibility of man-made low-permeability barriers in high-permeability aquifers using the numerical simulator TOUGH2/Gel to calculate the three-component flow (including a miscible gelling liquid). The simulation results show that an expected low-permeability barrier can be created by injecting grout with certain properties, and the altered aquifer performs well for CAESA. Additional sensitivity studies are also performed to reveal the effects of the various factors on the success of the low-permeability barrier creation, including the critical solidification concentration, the scale factor of the time dependence of the grout viscosity, the relative density of the grout, and the volume of the follow-up water injection. The results indicate that, in a horizontal aquifer, low critical solidification concentrations, and small scale factors are generally preferred and the density of grout should be close to that of the in situ water. For the given volume of the injected grout, there is an optimal follow-up water injection that will create the largest storage space without damaging the barrier. Furthermore, these results may help to extend the candidate sites for CAESA and the prospect of large scale energy storage.

25 ENERGY STORAGE↗

Numerical investigation of a joint approach to thermal energy storage and compressed air energy storage in aquifers

Different from conventional compressed air energy storage (CAES) systems, the advanced adiabatic compressed air energy storage (AA-CAES) system can store the compression heat which can be used to reheat air during the electricity generation stage. Thus, AA-CAES system can achieve a higher energy storage efficiency. Similar to the AA-CAES system, a compressed air energy storage in aquifers (CAESA) system, which is integrated with an aquifer thermal energy storage (ATES) could possibly achieve the same objective. In order to investigate the impact of ATES on the performance of CAESA, different injection air temperature schemes are designed and analyzed by using numerical simulations. Key parameters relative to energy recovery efficiencies of the different injection schemes, such as pressure distribution and temperature variation within the aquifers as well as energy flow rate in the injection well, are also investigated in this study. The simulations show that, although different injection schemes have a similar overall energy recovery efficiency (~97%) as well as a thermal energy recovery efficiency (~79.2%), the higher injection air temperature has a higher energy storage capability. Our results show the total energy storage for the injection air temperature at 80 °C is about 10% greater than the base model scheme at 40 °C. Sensitivity analysis reveal that permeability of the reservoir boundary could have significant impact on the system performance. However, other hydrodynamic and thermodynamic properties, such as the storage reservoir permeability, thermal conductivity, rock grain specific heat and rock grain density, have little impact on storage capability and the energy flow rate. Our study suggests that the combination of ATES and CAESA can help keep the high efficiency of energy storage so as to make CAESA system more efficiency.

25 ENERGY STORAGE↗

A Comparative study of two RVE modelling methods for chopped carbon fiber SMC

To achieve vehicle light-weighting, the chopped carbon fiber sheet molding compound (SMC) is identified as a promising material to replace metals. However, there are no effective tools and methods to predict the mechanical property of the chopped carbon fiber SMC due to the high complexity in microstructure features and the anisotropic properties. In this paper, the Representative Volume Element (RVE) approach is used to model the SMC microstructure. Two modeling methods, the Voronoi diagram-based method and the chip packing method, are developed for material RVE property prediction. The two methods are compared in terms of the predicted elastic modulus and the predicted results are validated using the Digital Image Correlation (DIC) tensile test results. Furthermore, the advantages and shortcomings of these two methods are discussed in terms of the required input information and the convenience of use in the integrated processing-microstructure-property analysis.

mesostructure reconstruction↗