Engineering Papers⌕ Search

Engineering topics

Li, Yang

Publications and source records attributed to Li, Yang.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Synthesis and microstructure characterization of Ni-Cr-Co-Ti-V-Al high entropy alloy coating on Ti-6Al-4V substrate by laser surface alloying

Ni-Cr-Co-Ti-V-Al high-entropy alloy coating on Ti-6Al-4V was synthesized by laser surface alloying. The coating is composed of a B2 matrix and (Co, Ni)Ti{sub 2} compounds with few β-Ti phases. Focused ion beam technique was utilized to prepare TEM sample and TEM observations agree well with XRD and SEM results. The formation of HEA phases is due to high temperature and rapid cooling rate during laser surface alloying. The thermodynamic parameters, ΔH{sub mix}, ΔS{sub mix}and δ as well as Δχ, should be used to predict the formation of the BCC solid solution, but they are not the strict criteria. Especially when Δχ reaches a high value (≥ 10%), BCC HEA will be partially decomposed, leading to the formation of (Co, Ni)Ti{sub 2} compound phases. - Highlights: •Preparing HEA coating on Ti-6Al-4V by laser surface alloying is successful. •The synthesized HEA coating mainly consists of BCC HEA and (Co, Ni)Ti{sub 2} compounds. •FIB technology was used to prepare the sample for TEM analysis. • ΔH{sub mix}, ΔS{sub mix}and δ as well as Δχ, should be all used to predict the formation of solid solution.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Second order kinetic theory of parallel momentum transport in collisionless drift wave turbulence

A second order kinetic model for turbulent ion parallel momentum transport is presented. A new nonresonant second order parallel momentum flux term is calculated. The resonant component of the ion parallel electrostatic force is the momentum source, while the nonresonant component of the ion parallel electrostatic force compensates for that of the nonresonant second order parallel momentum flux. The resonant component of the kinetic momentum flux can be divided into three parts, including the pinch term, the diffusive term, and the residual stress. By reassembling the pinch term and the residual stress, the residual stress can be considered as a pinch term of parallel wave-particle resonant velocity, and, therefore, may be called as “resonant velocity pinch” term. Considering the resonant component of the ion parallel electrostatic force is the transfer rate between resonant ions and waves (or, equivalently, nonresonant ions), a conservation equation of the parallel momentum of resonant ions and waves is obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Noise induced escape from a nonhyperbolic chaotic attractor of a periodically driven nonlinear oscillator

Noise induced escape from the domain of attraction of a nonhyperbolic chaotic attractor in a periodically excited nonlinear oscillator is investigated. The general mechanism of the escape in the weak noise limit is studied in the continuous case, and the fluctuational path is obtained by statistical analysis. Selecting the primary homoclinic tangency as the initial condition, the action plot is presented by parametrizing the set of escape trajectories and the global minimum gives rise to the optimal path. Results of both methods show good agreements. The entire process of escape is discussed in detail step by step using the fluctuational force. A structure of hierarchical heteroclinic crossings of stable and unstable manifolds of saddle cycles is found, and the escape is observed to take place through successive jumps through this deterministic hierarchical structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Basis Light-Front Quantization: Recent Progress and Future Prospects

Light-front Hamiltonian field theory has advanced to the stage of becoming a viable non-perturbative method for solving forefront problems in strong interaction physics. Physics drivers include hadron mass spectroscopy, generalized parton distribution functions, spin structures of the hadrons, inelastic structure functions, hadronization, particle production by strong external time-dependent fields in relativistic heavy ion collisions, and many more. We review selected recent results and future prospects with basis light-front quantization that include fermion-antifermion bound states in QCD, fermion motion in a strong time-dependent external field and a novel non-perturbative renormalization scheme.

Physics↗
DOE OSTI2016

Generation and periodontal differentiation of human gingival fibroblasts-derived integration-free induced pluripotent stem cells

Induced pluripotent stem cells (iPSCs) have been recognized as a promising cell source for periodontal tissue regeneration. However, the conventional virus-based reprogramming approach is associated with a high risk of genetic mutation and limits their therapeutic utility. Here, we successfully generated iPSCs from readily accessible human gingival fibroblasts (hGFs) through an integration-free and feeder-free approach via delivery of reprogramming factors of Oct4, Sox2, Klf4, L-myc, Lin28 and TP53 shRNA with episomal plasmid vectors. The iPSCs presented similar morphology and proliferation characteristics as embryonic stem cells (ESCs), and expressed pluripotent markers including Oct4, Tra181, Nanog and SSEA-4. Additionally, these cells maintained a normal karyotype and showed decreased CpG methylation ratio in the promoter regions of Oct4 and Nanog. In vivo teratoma formation assay revealed the development of tissues representative of three germ layers, confirming the acquisition of pluripotency. Furthermore, treatment of the iPSCs in vitro with enamel matrix derivative (EMD) or growth/differentiation factor-5 (GDF-5) significantly up-regulated the expression of periodontal tissue markers associated with bone, periodontal ligament and cementum respectively. Taken together, our data demonstrate that hGFs are a valuable cell source for generating integration-free iPSCs, which could be sequentially induced toward periodontal cells under the treatment of EMD and GDF-5. - Highlights: • Integration-free iPSCs are successfully generated from hGFs via an episomal approach. • EMD promotes differentiation of the hGFs-derived iPSCs toward periodontal cells. • GDF-5 promotes differentiation of the hGFs-derived iPSCs toward periodontal cells. • hGFs-derived iPSCs could be a promising cell source for periodontal regeneration.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

TRIM65 negatively regulates p53 through ubiquitination

Tripartite-motif protein family member 65 (TRIM65) is an important protein involved in white matter lesion. However, the role of TRIM65 in human cancer remains less understood. Through the Cancer Genome Atlas (TCGA) gene alteration database, we found that TRIM65 is upregulated in a significant portion of non-small cell lung carcinoma (NSCLC) patients. Our cell growth assay revealed that TRIM65 overexpression promotes cell proliferation, while knockdown of TRIM65 displays opposite effect. Mechanistically, TRIM65 binds to p53, one of the most critical tumor suppressors, and serves as an E3 ligase toward p53. Consequently, TRIM65 inactivates p53 through facilitating p53 poly-ubiquitination and proteasome-mediated degradation. Notably, chemotherapeutic reagent cisplatin induction of p53 is markedly attenuated in response to ectopic expression of TRIM65. Cell growth inhibition by TRIM65 knockdown is more significant in p53 positive H460 than p53 negative H1299 cells, and knockdown of p53 in H460 cells also shows compromised cell growth inhibition by TRIM65 knockdown, indicating that p53 is required, at least in part, for TRIM65 function. Our findings demonstrate TRIM65 as a potential oncogenic protein, highly likely through p53 inactivation, and provide insight into development of novel approaches targeting TRIM65 for NSCLC treatment, and also overcoming chemotherapy resistance. - Highlights: • TRIM65 expression is elevated in NSCLC. • TRIM65 inactivates p53 through mediating p53 ubiquitination and degradation. • TRIM65 attenuates the response of NSCLC cells to cisplatin.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

The ratio of intracellular CRY proteins determines the clock period length

Although a deficiency in CRY1 or CRY2 correlates with a shorter or longer circadian period, the regulation of CRY proteins in the circadian period has not been well studied. In this study, we found that both CRY1 and CRY2 were able to rescue oscillation in CRY null cells and that they displayed different periods. Furthermore, we demonstrated that protein nuclear import rates, not protein stability, regulate the period-length at the cellular level. Co-transfection of CRY1 and CRY2 in various ratios in the same cells gives rise to the predicted period length in a dose-dependent manner. Given the distinct characteristics of the C-terminal tails of the CRY1 and CRY2 proteins, our study addresses a long-standing hypothesis that the ratio of these two CRY molecules affects the clock period. - Highlights: • Rhythmic CRY2, like CRY1, in the correct CRY1 phase is sufficient to rescue clock oscillation in CRY null cells. • The short-period mammalian CRY2 protein is more stable than the CRY1 protein. • The N-terminal polypeptide of CRY2 contributes to its stability and Per2 repression, but it does not affect the period. • The C-terminal tails of CRYs regulate their protein stability and nuclear import, but the import rate governs the period. • The ratio, rather than the absolute amounts of CRY1 and CRY2 proteins, determines the period in mammalian cells.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

High performance mid-temperature selective absorber based on titanium oxides cermet deposited by direct current reactive sputtering of a single titanium target

This paper reports the design and fabrication of a new double cermet-based low-mid temperature solar selective absorber based on TiO x cermet layers, which were deposited with a single Ti target by varying O 2 partial pressure in sputtering chamber as reactive gas. High metal volume fraction cermet 1 and low metal volume fraction cermet 2 were deposited with O 2 partial pressure of 0.15 mTorr and 0.25 mTorr, respectively, with direct current power density of 6.58 W cm -2 . The complex refractive indices from ellipsometry were used to design solar selective absorber. The reflectance, thermal stability, and morphology were studied in absorbers on Cu and stainless steel. The effect of TiO 2 and SiO 2 as anti-reflective coating layers was investigated. Finally, the absorber on Cu substrate has high absorptance of 90.8% and low emittance of 4.9% (100 °C), and changed to 96.0% and 6.6%, respectively, after annealing at 300 °C for 4 days.

42 ENGINEERING↗
DOE OSTI2016

Tuning the metal-insulator transition via epitaxial strain and Co doping in NdNiO{sub 3} thin films grown by polymer-assisted deposition

The epitaxial NdNi{sub 1-x}Co{sub x}O{sub 3} (0 ≤ x ≤ 0.10) thin films on (001) LaAlO{sub 3} and (001) SrTiO{sub 3} substrates were grown by a simple polymer-assisted deposition technique. The co-function of the epitaxial strain and Co doping on the metal-insulator transition in perovskite nickelate NdNiO{sub 3} thin films is investigated. X-ray diffraction and scanning electron microscopy reveal that the as-prepared thin films exhibit good crystallinity and heteroepitaxy. The temperature dependent resistivities of the thin films indicate that both the epitaxial strain and Co doping lower the metal-insulator (MI) transition temperature, which can be treated as a way to tune the MI transition. Furthermore, under the investigated Co-doping levels, the MI transition temperature (T{sub MI}) shifts to low temperatures with Co content increasing under both compressive and tensile strain, and the more distinction is in the former situation. When x is increased up to 0.10, the insulating phase is completely suppressed under the compressive strain. With the strain increases from compression to tension, the resistivities are enhanced both in the metal and insulating regions. However, the Co-doping effect on the resistivity shows a more complex situation. As Co content x increases from zero to 0.10, the resistivities are reduced both in the metal and insulating regions under the tensile strain, whereas they are enhanced in the high-temperature metal region under the compressive strain. Based on the temperature dependent resistivity in the metal regions, it is suggested that the electron-phonon coupling in the films becomes weaker with the increase of both the strain and Co-doping.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Experimental study of surface insulated-standard hybrid tungsten planar wire array Z-pinches at “QiangGuang-I” facility

The experimental results of the insulated-standard hybrid wire array Z pinches carried out on “QiangGuang-I” facility at Northwest Institute of Nuclear Technology were presented and discussed. The surface insulating can impose a significant influence on the dynamics and radiation characteristics of the hybrid wire array Z pinches, especially on the early stage (t/t{sub imp} < 0.6). The expansion of insulated wires at the ablation stage is suppressed, while the streams stripped from the insulated wires move faster than that from the standard wires. The foot radiation of X-ray is enhanced by increment of the number of insulated wires, 19.6 GW, 33.6 GW, and 68.6 GW for shots 14037S, 14028H, and 14039I, respectively. The surface insulation also introduces nonhomogeneity along the single wire—the streams move much faster near the electrodes. The colliding boundary of the hybrid wire array Z pinches is bias to the insulated side approximately 0.6 mm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

The contribution of the delayed ionization in strong-field nonsequential double ionization

With the classical ensemble model, we have investigated the pulse-duration dependence of nonsequential double ionization (NSDI) over a wide range of laser intensity. The correlated electron momentum distributions are distinctly different for the few-cycle and multiple cycle pulses, which agree well with the previous experiments. Based on this agreement, we analyzed the underlying process for the pulse-duration dependence of the electron correlation by tracing the classical trajectories. Counterintuitively, our analysis shows that the recollision-induced excited states of NSDI could resist ionization in the strong laser field for a time much longer than one optical cycle even at very high intensities. For the multiple-cycle pulses, NSDI events with such a long time delay have significant contribution to the total NSDI yields, which is responsible for the pulse-duration dependence of the observed correlated patterns in the electron momentum distributions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Finite Element Simulation of Compression Molding of Woven Fabric Carbon Fiber/Epoxy Composites: Part I Material Model Development

Woven fabric carbon fiber/epoxy composites made through compression molding are one of the promising choices of material for the vehicle light-weighting strategy. Previous studies have shown that the processing conditions can have substantial influence on the performance of this type of the material. Therefore the optimization of the compression molding process is of great importance to the manufacturing practice. An efficient way to achieve the optimized design of this process would be through conducting finite element (FE) simulations of compression molding for woven fabric carbon fiber/epoxy composites. However, performing such simulation remains a challenging task for FE as multiple types of physics are involved during the compression molding process, including the epoxy resin curing and the complex mechanical behavior of woven fabric structure. In the present study, the FE simulation of the compression molding process of resin based woven fabric composites at continuum level is conducted, which is enabled by the implementation of an integrated material modeling methodology in LS-Dyna. Specifically, the chemo-thermo-mechanical problem of compression molding is solved through the coupling of three material models, i.e., one thermal model for temperature history in the resin, one mechanical model to update the curing-dependent properties of the resin and another mechanical model to simulate the behavior of the woven fabric composites. Preliminary simulations of the carbon fiber/epoxy woven fabric composites in LS-Dyna are presented as a demonstration, while validations and models with real part geometry are planned in the future work.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Elastic properties of suspended black phosphorus nanosheets

The mechanical properties of black phosphorus (BP) nanosheets suspended over circular holes were measured by an atomic force microscope nanoindentation method. The continuum mechanic model was introduced to calculate the elastic modulus and pretension of BP nanosheets with thicknesses ranging from 14.3 to 34 nm. Elastic modulus of BP nanosheets declines with thickness, and the maximum value is 276 ± 32.4 GPa. Besides, the effective strain of BP ranges from 8 to 17% with a breaking strength of 25 GPa. Our results show that BP nanosheets serve as a promising candidate for flexible electronic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Infiltrated W–Cu composites with combined architecture of hierarchical particulate tungsten and tungsten fibers

In this article, novel W–Cu composites reinforced with topologically-inserted tungsten fibers (W{sub f}) have been fabricated by hot-press sintering and infiltration method. By pre-sputtering of ~ 100 nm thick chromium layer onto the surface of W{sub f}, the contiguity or connectivity between W{sub f} and neighboring tungsten particles (W{sub p}) or Cu after sintering and infiltration was enhanced. Combined SEM, TEM and STEM techniques confirmed that the intact interfaces of W{sub f}/W{sub p} and W{sub f}/Cu free from precipitates, impurities and porosities would provide desirable strength and ductility. Further mechanical tests also validated its superior compressive strength and plasticity at various temperatures, together with significantly improved tensile strength (by 23.6%) and hardness (by 9.3%) for the W–Cu composite after reinforcement with Cr-coated W{sub f}, which promotes the engineering application of the composite greatly. - Highlights: • W-fibers reinforced W–Cu composites were fabricated by sintering and infiltration. • The sputtered Cr onto W{sub f} has dissolved into adjacent W{sub f} and W{sub p} during fabrication. • The intact interfaces of W{sub f}/W{sub p} and W{sub f}/Cu confer enhanced strength and ductility. • Tensile strength and hardness improve by 23.6% and 9.3% after interface tuning.

36 MATERIALS SCIENCE↗