Mitigating emissions and costs through demand-side solutions in Chinese residential buildings
Not provided.
Science & Technology - Other Topics↗
Engineering topics
Li, Yan
Publications and source records attributed to Li, Yan.
Revealing subterahertz atomic vibrations in quantum paraelectrics by surface-sensitive spintronic terahertz spectroscopy
Understanding surface collective dynamics in quantum materials is crucial for advancing quantum technologies. For example, surface phonon modes in quantum paraelectrics are thought to be essential in facilitating interfacial superconductivity. However, detecting these modes, especially below 1 terahertz, is challenging because of limited sampling volumes and the need for high spectroscopic resolution. Here, we report surface soft transverse optical (TO1) phonon dynamics in KTaO 3 and SrTiO 3 by surface-sensitive spintronic terahertz spectroscopy that can sense the collective modes only a few nanometers deep from the surface. In KTaO 3 , the TO1 mode softens and sharpens with decreasing temperature, leveling off at 0.7 terahertz. In contrast, this mode in SrTiO 3 broadens substantially below the quantum paraelectric crossover and coincides with the hardening of a sub–milli–electron volt phonon mode related to the antiferrodistortive transition. These observations that deviate from their bulk properties may have implications for interfacial superconductivity and ferroelectricity. The developed technique opens opportunities for sensing low-energy surface collective excitations.
Chu, Zhaodong↗
Unlocking Electrostrain in Plastically Deformed Barium Titanate
Achieving substantial electrostrain alongside a large effective piezoelectric strain coefficient (d 33 *) in piezoelectric materials remains a formidable challenge for advanced actuator applications. Here, in this work, a straightforward approach to enhance these properties by strategically designing the domain structure and controlling the domain switching through the introduction of arrays of ordered {100}<100> dislocations is proposed. This dislocation engineering yields an intrinsic lock-in steady–state electrostrain of 0.69% at a low field of 10 kV cm -1 without external stress and an output strain energy density of 5.24 J cm -3 in single-crystal BaTiO 3 , outperforming the benchmark piezoceramics and relaxor ferroelectric single-crystals. Additionally, applying a compression stress of 6 MPa fully unlocks electrostrains exceeding 1%, yielding a remarkable d 33 * value over 10 000 pm V -1 and achieving a record-high strain energy density of 11.67 J cm -3 . Optical and transmission electron microscopy, paired with laboratory and synchrotron X-ray diffraction, is employed to rationalize the observed electrostrain. Phase-field simulations further elucidate the impact of charged dislocations on domain nucleation and domain switching. These findings present an effective and sustainable strategy for developing high-performance, lead-free piezoelectric materials without the need for additional chemical elements, offering immense potential for actuator technologies.
36 MATERIALS SCIENCE↗
Multi-Factor-Coupled, Ahead-of-Time Aggregation of Power Flexibility Under Forecast Uncertainty
The increasing penetration of distributed energy resources (DERs) is significantly reshaping the role of distribution systems under active energy management. To aggregate the active-reactive power flexibility of DERs dispersed at the feeder and provide capacity support to the transmission system, it is essential to efficiently identify feasible substation power injection trajectories. This paper introduces a novel ahead-of-time flexibility characterization method to address it. First, a polyhedral non-feeder-level power flexibility region (PFR) is constructed, accounting for various time-dependent, power-coupled, and forecast error uncertainties. Then, a polyhedral feeder-level PFR is analytically derived through a coordinate transformation, which can reveal the uncertainty propagation path, i.e., how uncertainty applies to the feeder-level PFR. To facilitate the high-level application, a tractable chance-constrained Chebyshev centering optimization model is further developed to find a ball-shaped inner approximation of the feeder-level PFR. Finally, the proposed method is validated on a modified IEEE 123-bus test system. Here, both theoretical and experimental results show that, with appropriate robustness parameter settings, the proposed method can make the approximated PFR less conservative with abundant robustness against forecast error uncertainty.
24 POWER TRANSMISSION AND DISTRIBUTION↗
Biodiversity of mudflat intertidal viromes along the Chinese coasts
Not provided.
Science & Technology - Other Topics↗
Upwind Moisture Controls on Interannual Variations of Precipitation and Vegetation in China's Drylands
Dryland precipitation depends on upwind and local moisture sources via moisture recycling. How upwind moisture variations affect interannual variations of downwind precipitation and vegetation in China's drylands remains unclear. We used high-resolution moisture tracking data sets and found terrestrial moisture (93%) was the dominant moisture source for China's drylands, especially from drylands themselves (46%). In most dryland grids, we observed strong correlations between precipitation and upwind moisture sources from 2003 to 2022 (median r = 0.55), with a more significant effect in drier areas. These demonstrated the upwind moisture control on interannual variations of dryland precipitation, in which internal moisture from drylands exceeds the influence of external terrestrial sources. The upwind moisture variations, especially the recycled moisture of drylands, propagate to influence downwind vegetation greenness in precipitation-sensitive dryland areas. Our findings revealed that upwind moisture variations induced by climate or land-cover changes have important implications for water and food security in China's drylands.
54 ENVIRONMENTAL SCIENCES↗
On the Topotactic Phase Transition Achieving Superconducting Infinite‐Layer Nickelates
Abstract Topotactic reduction is critical to a wealth of phase transitions of current interest, including synthesis of the superconducting nickelate Nd 0.8 Sr 0.2 NiO 2 , reduced from the initial Nd 0.8 Sr 0.2 NiO 3 /SrTiO 3 heterostructure. Due to the highly sensitive and often damaging nature of the topotactic reduction, however, only a handful of research groups have been able to reproduce the superconductivity results. A series of in situ synchrotron‐based investigations reveal that this is due to the necessary formation of an initial, ultrathin layer at the Nd 0.8 Sr 0.2 NiO 3 surface that helps to mediate the introduction of hydrogen into the film such that apical oxygens are first removed from the Nd 0.8 Sr 0.2 NiO 3 / SrTiO 3 (001) interface and delivered into the reducing environment. This allows the square‐planar / perovskite interface to stabilize and propagate from the bottom to the top of the film without the formation of interphase defects. Importantly, neither geometric rotations in the square planar structure nor significant incorporation of hydrogen within the films is detected, obviating its need for superconductivity. These findings unveil the structural basis underlying the transformation pathway and provide important guidance on achieving the superconducting phase in reduced nickelate systems.
36 MATERIALS SCIENCE↗
Generalized boost transformations in finite volumes and application to Hamiltonian methods
The investigation of hadron interactions within lattice QCD has been facilitated by the well-known quantisation condition, linking scattering phase shifts to finite-volume energies. Additionally, the ability to utilise systems at finite total boosts has been pivotal in smoothly charting the energy-dependent behaviour of these phase shifts. The existing implementations of the quantization condition at finite boosts rely on momentum transformations between rest and moving frames, defined directly in terms of the energy eigenvalues. This energy dependence is unsuitable in the formulation of a Hamiltonian. In this work, we introduce a novel approach to generalise the three-momentum boost prescription, enabling the incorporation of energy-independent finite-volume Hamiltonians within moving frames. We demonstrate the application of our method through numerical comparisons, employing a phenomenological ππ scattering example.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Few-shot learning-based generative design of metamaterials with zero Poisson’s ratio
Not Available
36 MATERIALS SCIENCE↗
On the Emergence of Ferromagnetism in LaCoO 3 Ultrathin Films
It is well known that the properties of a crystal evolve as it increases in size from a single atomic plane to that of the bulk. Such size-dependent transitions can stem from many different origins and depend on minute changes to crystal bonding and composition. Here, a model example is that of LaCoO 3 , which is non-magnetic in the bulk but can display ferromagnetism at the nanoscale. Here, the evolution of structure-property relationships is studied in the LaCoO 3-δ /SrTiO 3 (001) system as the thickness of LaCoO 3-δ is increased from a single plane to 10 unit cells. In situ synchrotron X-ray studies are performed during and post-deposition to probe changes in the interactions between structure, stoichiometry, and magnetic behavior. Structural quantification indicates that the oxygen octahedral rotation pattern evolves with thickness, due to inherent differences in crystal symmetry between the film and substrate. The change in rotation modifies the required energy barrier for the spin state transition via the Co–O bond length and Co–O–Co bond angle, affecting the appearance of ferromagnetism. Our results highlight the contributions of high spin Co 2+ and/or high spin Co 3+ to respective weak and robust ferromagnetism and the evolution of properties with size in ultrathin LaCoO 3-δ heterostructures.
36 MATERIALS SCIENCE↗
Electric Field Effects in Hybrid Perovskites Studied via Picosecond Kerr Microscopy
Not provided.
Materials Science↗
XA21-mediated resistance to Xanthomonas oryzae pv. oryzae is dose dependent
The rice receptor kinase XA21 confers broad-spectrum resistance to Xanthomonas oryzae pv. oryzae ( Xoo ), the causal agent of rice bacterial blight disease. To investigate the relationship between the expression level of XA21 and resulting resistance, we generated independent HA-XA21 transgenic rice lines accumulating the XA21 immune receptor fused with an HA epitope tag. Whole-genome sequence analysis identified the T-DNA insertion sites in sixteen independent T0 events. Further, through quantification of the HA-XA21 protein and assessment of the resistance to Xoo strain PXO99 in six independent transgenic lines, we observed that XA21-mediated resistance is dose dependent. In contrast, based on the four agronomic traits quantified in these experiments, yield is unlikely to be affected by the expression level of HA-XA21 . These findings extend our knowledge of XA21-mediated defense and contribute to the growing number of well-defined genomic landing pads in the rice genome that can be targeted for gene insertion without compromising yield.
60 APPLIED LIFE SCIENCES↗
3D printing synthesis of catalysts
The catalyst industry generates approximately $20 billion every year globally and plays a major role in the energy production sector. Traditional industrial catalysts (e.g., pellets) typically have mass and heat transfer limitations, and cause a pressure drop in continuous-flow reactors, lowering the efficiency of the catalytic processes. 3D printing technology has evolved rapidly over the past decade, and the 3D printing of catalysts with desired geometries can address many of the above-stated challenges with traditional catalysts. However, challenges remain to be addressed and opportunities remain to be explored before the full potential in the design and 3D printing of novel catalysts can be realized. Herein this article reviews the recent development in the 3D printing of catalysts. It summarizes the 3D printing design, dimension, property, and performance of 3D printed catalysts. The applications of 3D printed catalysts, such as reforming, wastewater treatment, and CO 2 capture and removal, are discussed, with a techno-economic analysis and life cycle analysis. Future research directions and opportunities for 3D printing of catalysts are also highlighted.
25 ENERGY STORAGE↗
Atomically precise engineering of spin–orbit polarons in a kagome magnetic Weyl semimetal
Atomically precise defect engineering is essential to manipulate the properties of emerging topological quantum materials for practical quantum applications. However, this remains challenging due to the obstacles in modifying the typically complex crystal lattice with atomic precision. Here, we report the atomically precise engineering of the vacancy-localized spin–orbit polarons in a kagome magnetic Weyl semimetal Co 3 Sn 2 S 2 , using scanning tunneling microscope. We achieve the step-by-step repair of the selected vacancies, leading to the formation of artificial sulfur vacancies with elaborate geometry. We find that that the bound states localized around these vacancies undergo a symmetry dependent energy shift towards Fermi level with increasing vacancy size. As the vacancy size increases, the localized magnetic moments of spin–orbit polarons become tunable and eventually become itinerantly negative due to spin–orbit coupling in the kagome flat band. These findings provide a platform for engineering atomic quantum states in topological quantum materials at the atomic scale.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Reconfigurable spin current transmission and magnon–magnon coupling in hybrid ferrimagnetic insulators
Coherent spin waves possess immense potential in wave-based information computation, storage, and transmission with high fidelity and ultra-low energy consumption. However, despite their seminal importance for magnonic devices, there is a paucity of both structural prototypes and theoretical frameworks that regulate the spin current transmission and magnon hybridization mediated by coherent spin waves. Here, we demonstrate reconfigurable coherent spin current transmission, as well as magnon–magnon coupling, in a hybrid ferrimagnetic heterostructure comprising epitaxial Gd 3 Fe 5 O 12 and Y 3 Fe 5 O 12 insulators. By adjusting the compensated moment in Gd 3 Fe 5 O 12 , magnon–magnon coupling was achieved and engineered with pronounced anticrossings between two Kittel modes, accompanied by divergent dissipative coupling approaching the magnetic compensation temperature of Gd 3 Fe 5 O 12 (T M,GdIG ), which were modeled by coherent spin pumping. Remarkably, we further identified, both experimentally and theoretically, a drastic variation in the coherent spin wave-mediated spin current across T M,GdIG , which manifested as a strong dependence on the relative alignment of magnetic moments. Our findings provide significant fundamental insight into the reconfiguration of coherent spin waves and offer a new route towards constructing artificial magnonic architectures.
42 ENGINEERING↗
Optimizing dietary rumen-degradable starch to rumen-degradable protein ratio improves lactation performance and nitrogen utilization efficiency in mid-lactating Holstein dairy cows
The dietary rumen-degradable starch (RDS) to rumen-degradable protein (RDP) ratio, denoted as the RDS-to-RDP ratio (SPR), has been proven to enhance in vitro rumen fermentation. However, the effects of dietary SPR in vivo remain largely unexplored. This study was conducted to investigate the effect of dietary SPR on lactation performance, nutrient digestibility, rumen fermentation patterns, blood indicators, and nitrogen (N) partitioning in mid-lactating Holstein cows. Seventy-two Holstein dairy cows were randomly assigned to three groups (24 head/group), balanced for (mean ± standard deviation) days in milk (116 ± 21.5), parity (2.1 ± 0.8), milk production (42 ± 2.1 kg/d), and body weight (705 ± 52.5 kg). The cows were fed diets with low (2.1, control), medium (2.3), or high (2.5) SPR, formulated to be isoenergetic, isonitrogenous, and iso-starch. The study consisted of a one-week adaptation phase followed by an eight-week experimental period. The results indicated that the high SPR group had a lower dry matter intake compared to the other groups ( p < 0.05). A quadratic increase in milk yield and feed efficiency was observed with increasing dietary SPR ( p < 0.05), peaking in the medium SPR group. The medium SPR group exhibited a lower milk somatic cell count and a higher blood total antioxidant capacity compared to other groups ( p < 0.05). With increasing dietary SPR, there was a quadratic improvement ( p < 0.05) in the total tract apparent digestibility of crude protein, ether extract, starch, neutral detergent fiber, and acid detergent fiber. Although no treatment effect was observed in rumen pH, the rumen total volatile fatty acids concentration and microbial crude protein synthesis increased quadratically ( p < 0.05) as dietary SPR increased. The molar proportion of propionate linearly increased ( p = 0.01), while branched-chain volatile fatty acids linearly decreased ( p = 0.01) with increasing dietary SPR. The low SPR group (control) exhibited higher concentration of milk urea N, rumen ammonia N, and blood urea N than other groups ( p < 0.05). Despite a linear decrease ( p < 0.05) in the proportion of urinary N to N intake, increasing dietary SPR led to a quadratic increase ( p = 0.01) in N utilization efficiency and a quadratic decrease ( p < 0.05) in the proportion of fecal N to N intake. In conclusion, optimizing dietary SPR has the potential to enhance lactation performance and N utilization efficiency. Based on our findings, a medium dietary SPR (with SPR = 2.3) is recommended for mid-lactating Holstein dairy cows. Nevertheless, further research on rumen microbial composition and metabolites is warranted to elucidate the underlying mechanisms of the observed effects.
Chen, Panliang↗
HHL algorithm with mapping function and enhanced sampling for model predictive control in microgrids
Here, this paper presents a refined quantum Harrow Hassidim Lloyd (HHL) algorithm for microgrid control. The first novelty of the developed method is that a mapping shift function enables the original HHL algorithm to handle general linear equations with non-singular and indefinite matrix. Second, a method of Matrix Extension for Amplifying Sampling Probabilities of Intended Solution (ME-ASPI) is proposed to design the reformulated linear algebraic equations, allowing for improved sampling efficiency of the quantum tomography in the refined HHL algorithm. Then, we applied the method to solve the model predictive control (MPC) problem in nonlinear dynamical microgrids. Specifically, with the ME-ASPI method, the refined HHL algorithm can effectively obtain the intended partial optimal control inputs for MPC. The optimization of quadratic programming problem in each time step of MPC is transformed into a linear system problem, which is addressed by the proposed quantum solver through using only partial information, with the time complexity improved from $\mathscr{O}(\mathscr{N}^{2.37286})$ classically to $\mathscr{O}(\mathscr{N}^{2} log \mathscr{N}$ x $p$ log $p)$ in quantum. Numerical examples have validated the effectiveness of the refined HHL algorithm with the proposed mapping function and the ME-ASPI method. By leveraging quantum properties, the proposed method provides a hybrid quantum–classical framework for microgrid control. This generic method can also potentially tackle many other challenges in analyzing and controlling general complex engineered systems.
24 POWER TRANSMISSION AND DISTRIBUTION↗
Cathode active materials for lithium-ion batteries
Compounds, powders, and cathode active materials that can be used in lithium ion batteries are described herein. Methods of making such compounds, powders, and cathode active materials are described.
Wu, Huiming↗