Engineering Papers⌕ Search

Engineering topics

Li, Y.

Publications and source records attributed to Li, Y..

At least 559 records · Page 31

Neutral pion electroproduction in the resonance region at high Q{sup 2}

The process ep{yields}ep{pi}{sup 0} has been measured at Q{sup 2}=6.4 and 7.7 (GeV/c{sup 2}){sup 2} in Jefferson Lab's Hall C. Unpolarized differential cross sections are reported in the virtual photon-proton center-of-mass frame considering the process {gamma}*p{yields}p{pi}{sup 0}. Various details relating to the background subtractions, radiative corrections, and systematic errors are discussed. The usefulness of the data with regard to the measurement of the electromagnetic properties of the well-known {delta}(1232) resonance is covered in detail. Specifically considered are the electromagnetic and scalar-magnetic ratios R{sub EM} and R{sub SM} along with the magnetic transition form factor G{sub M}*. It is found that the rapid falloff of the {delta}(1232) contribution continues into this region of momentum transfer and that other resonances may be making important contributions in this region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Applications of quark-hadron duality in the F{sub 2} structure function

Inclusive electron-proton and electron-deuteron inelastic cross sections have been measured at Jefferson Lab (JLab) in the resonance region, at large Bjorken x, up to 0.92, and four-momentum transfer squared Q{sup 2} up to 7.5 GeV{sup 2} in the experiment E00-116. These measurements are used to extend to larger x and Q{sup 2} precision, quantitative, studies of the phenomenon of quark-hadron duality. Our analysis confirms, both globally and locally, the apparent 'violation' of quark-hadron duality previously observed at a Q{sup 2} of 3.5 GeV{sup 2} when resonance data are compared to structure function data created from CTEQ6M and MRST2004 parton distribution functions (PDFs). More importantly, our new data show that this discrepancy saturates by Q{sup 2}{approx}4 GeV{sup 2}, becoming Q{sup 2} independent. This suggests only small violations of Q{sup 2} evolution by contributions from the higher-twist terms in the resonance region that is confirmed by our comparisons to ALEKHIN and ALLM97. We conclude that the unconstrained strength of the CTEQ6M and MRST2004 PDFs at large x is the major source of the disagreement between data and these parametrizations in the kinematic regime we study and that, in view of quark-hadron duality, properly averaged resonance region data could be used in global quantum chromodynamics fits to reduce PDF uncertainties at large x.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electroproduction of {eta} mesons in the S{sub 11}(1535) resonance region at high momentum transfer

The differential cross section for the process p(e,e{sup '}p){eta} has been measured at Q{sup 2}{approx}5.7 and 7.0(GeV/c){sup 2} for center-of-mass energies from threshold to 1.8 GeV, encompassing the S{sub 11}(1535) resonance, which dominates the channel. This is the highest momentum-transfer measurement of this exclusive process to date. The helicity-conserving transition amplitude A{sub 1/2}, for the production of the S{sub 11}(1535) resonance, is extracted from the data. Within the limited Q{sup 2} now measured, this quantity appears to begin scaling as Q{sup -3}--a predicted, but not definitive, signal of the dominance of perturbative QCD at Q{sup 2}{approx}5 (GeV/c){sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Low-Energy Electron Capture in Collisions of C3+ with He

Charge transfer processes due to collisions of ground-state C{sup 3+}(1s{sup 2}2s {sup 2}S) ions with He atoms are studied using the quantum-mechanical molecular-orbital close-coupling method for energies in the range 10{sup -4}-2 x 10{sup 3} eV/u. The ab initio adiabatic potentials and radial couplings utilized in the calculations are obtained from the multireference single- and double-excitation configuration interaction approach. Total and state-selective single-electron capture cross sections and rate coefficients are calculated and compared with the available experimental and theoretical data. A good agreement is found between the measured cross sections and the present calculations. However, the previous calculations of total rate coefficients using the Landau-Zener model are one to two orders of magnitude smaller than the present results.

74 ATOMIC AND MOLECULAR PHYSICS↗

Scaling study of the pion electroproduction cross sections

The {sup 1}H(e, e{sup '}{pi}{sup +})n cross section was measured for arange of four-momentum transfer up to Q{sup 2}=3.91 GeV{sup 2} at values of the invariant mass W above the resonance region. The Q{sup 2} dependence of the longitudinal component was found to be consistent with the Q{sup 2}-scaling prediction for hard exclusive processes. This suggests that the QCD factorization theorem is applicable at rather low values of Q{sup 2}. The transverse term falls off slower than the naive Q{sup -8} expectation and remains appreciable even at Q{sup 2}=3.91 GeV{sup 2}.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of Nuclear Transparency for the A(e,e{sup '}{pi}{sup +}) Reaction

We have measured the nuclear transparency of the A(e,e{sup '}{pi}{sup +}) process in {sup 2}H, {sup 12}C, {sup 27}Al, {sup 63}Cu, and {sup 197}Au targets. These measurements were performed at the Jefferson Laboratory over a four momentum transfer squared range Q{sup 2}=1.1 to 4.7 (GeV/c){sup 2}. The nuclear transparency was extracted as the super-ratio of ({sigma}{sub A}/{sigma}{sub H}) from data to a model of pion-electroproduction from nuclei without {pi}-N final-state interactions. The Q{sup 2} and atomic number dependence of the nuclear transparency both show deviations from traditional nuclear physics expectations and are consistent with calculations that include the quantum chromodynamical phenomenon of color transparency.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Comparative Study Using CFD to Predict Iced Airfoil Aerodynamics

WIND, Fluent, and PowerFLOW were used to predict the lift, drag, and moment coefficients of a business-jet airfoil with a rime ice (rough and jagged, but no protruding horns) and with a glaze ice (rough and jagged end has two or more protruding horns) for angles of attack from zero to and after stall. The performance of the following turbulence models were examined by comparing predictions with available experimental data. Spalart-Allmaras (S-A), RNG k-epsilon, shear-stress transport, v(sup 2)-f, and a differential Reynolds stress model with and without non-equilibrium wall functions. For steady RANS simulations, WIND and FLUENT were found to give nearly identical results if the grid about the iced airfoil, the turbulence model, and the order of accuracy of the numerical schemes used are the same. The use of wall functions was found to be acceptable for the rime ice configuration and the flow conditions examined. For rime ice, the S-A model was found to predict accurately until near the stall angle. For glaze ice, the CFD predictions were much less satisfactory for all turbulence models and codes investigated because of the large separated region produced by the horns. For unsteady RANS, WIND and FLUENT did not provide better results. PowerFLOW, based on the Lattice Boltzmann method, gave excellent results for the lift coefficient at and near stall for the rime ice, where the flow is inherently unsteady.

Chi, x.↗

Electronics for Extreme Environments

Most of the NASA missions involve extreme environments comprising radiation and low or high temperatures. Current practice of providing friendly ambient operating environment to electronics costs considerable power and mass (for shielding). Immediate missions such as the Europa orbiter and lander and Mars landers require the electronics to perform reliably in extreme conditions during the most critical part of the mission. Some other missions planned in the future also involve substantial surface activity in terms of measurements, sample collection, penetration through ice and crust and the analysis of samples. Thus it is extremely critical to develop electronics that could reliably operate under extreme space environments. Silicon On Insulator (SOI) technology is an extremely attractive candidate for NASA's future low power and high speed electronic systems because it offers increased transconductance, decreased sub-threshold slope, reduced short channel effects, elimination of kink effect, enhanced low field mobility, and immunity from radiation induced latch-up. A common belief that semiconductor devices function better at low temperatures is generally true for bulk devices but it does not hold true for deep sub-micron SOI CMOS devices with microscopic device features of 0.25 micrometers and smaller. Various temperature sensitive device parameters and device characteristics have recently been reported in the literature. Behavior of state of the art technology devices under such conditions needs to be evaluated in order to determine possible modifications in the device design for better performance and survivability under extreme environments. Here, we present a unique approach of developing electronics for extreme environments to benefit future NASA missions as described above. This will also benefit other long transit/life time missions such as the solar sail and planetary outposts in which electronics is out open in the unshielded space at the ambient space temperatures and always exposed to radiation. Additional information is contained in the original extended abstract.

Patel, J. U.↗

Transgenics in crops

With rapid world population growth and declining availability of fresh water and arable land, a new technology is urgently needed to enhance agricultural productivity. Recent discoveries in the field of crop transgenics clearly demonstrate the great potential of this technology for increasing food production and improving food quality while preserving the environment for future generations. In this review, we briefly discuss some of the recent achievements in crop improvement that have been made using gene transfer technology.

Review↗

Quiescent Giant Molecular Cloud Cores in the Galactic Center

We have used the Long Wavelength Spectrometer (LWS) aboard the Infrared Space Observatory (ISO) to map the far-infrared continuum emission (45-175 micrometer) toward several massive Giant Molecular Cloud (GMC) cores located near the Galactic center. The observed far-infrared and submillimeter spectral energy distributions imply low temperatures (approx. 15 - 22 K) for the bulk of the dust in all the sources, consistent with external heating by the diffuse ISRF and suggest that these GMCs do not harbor high- mass star-formation sites, in spite of their large molecular mass. Observations of FIR atomic fine structure lines of C(sub II) and O(sub I) indicate an ISRF enhancement of approx. 10(exp 3) in the region. Through continuum radiative transfer modeling we show that this radiation field strength is in agreement with the observed FIR and submillimeter spectral energy distributions, assuming primarily external heating of the dust with only limited internal luminosity (approx. 2 x 10(exp 5) solar luminosity). Spectroscopic observations of millimeter-wave transitions of H2CO, CS, and C-34S carried out with the Caltech Submillimeter Observatory (CSO) and the Institut de Radio Astronomie Millimetrique (IRAM) 30-meter telescope indicate a gas temperature of approx. 80 K, significantly higher than the dust temperatures, and density of approx. 1 x 10(exp 5)/cc in GCM0.25 + 0.01, the brightest submillimeter source in the region. We suggest that shocks caused by cloud collisions in the turbulent interstellar medium in the Galactic center region are responsible for heating the molecular gas. This conclusion is supported by the presence of wide-spread emission from molecules such as SiO, SO, and CH3OH, which are considered good shock tracers. We also suggest that the GMCs studied here are representative of the "typical", pre-starforming cloud population in the Galactic center.

Lis, D. C.↗

Non-Equilibrium Superconductivity and Magnetic Pair Breaking in Perovskite Half-Metallic Ferromagnet-Insulator-Superconductor (F-I-S) Heterostructures

The effect of spin-polarized quasiparticle currents on the critical current density (J-c) of cuprate superconductors is studied in perovskite F-I-S heterostructures as a function of insulator thickness and of underlying magnetic materials. A pulsed current technique is employed to minimize extraneous Joule heating on the superconductor. At temperatures near T-c, F-I-S samples with insulator thicknesses\1e2nm show precipitous decrease in J_c as current injection (I_m) is increased. In contrast, J_c in a controlled sample with a substituted non-magnetic material (N-I-S) exhibit no dependence on I_m. Similarly, a F-I-S sample with a 10 mn insulating barrier also show little J_c effect versus I_m. At low temperatures with I_m = 0, significant suppression of J-c is observed only in the thin barrier F-I-S samples, although T_c and the normal-state resistivity of all samples are comparable. These phenomena can be attributed to the Cooper pair breaking induced by externally-injected and internally-reflected spin-polarized quasiparticle currents. We estimate an order of magnitude range for the spin diffusion length of 100 nm to 100\ mum.

Fu, C.-C.↗