Engineering Papers⌕ Search

Engineering topics

Li, Y.

Publications and source records attributed to Li, Y..

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Ionization electron signal processing in single phase LArTPCs. Part I. Algorithm Description and quantitative evaluation with MicroBooNE simulation

Here, we describe the concept and procedure of drifted-charge extraction developed in the MicroBooNE experiment, a single-phase liquid argon time projection chamber (LArTPC). This technique converts the raw digitized TPC waveform to the number of ionization electrons passing through a wire plane at a given time. A robust recovery of the number of ionization electrons from both induction and collection anode wire planes will augment the 3D reconstruction, and is particularly important for tomographic reconstruction algorithms. A number of building blocks of the overall procedure are described. The performance of the signal processing is quantitatively evaluated by comparing extracted charge with the true charge through a detailed TPC detector simulation taking into account position-dependent induced current inside a single wire region and across multiple wires. Some areas for further improvement of the performance of the charge extraction procedure are also discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Ionization electron signal processing in single phase LArTPCs. Part II. Data/simulation comparison and performance in MicroBooNE

The single-phase liquid argon time projection chamber (LArTPC) provides a large amount of detailed information in the form of fine-grained drifted ionization charge from particle traces. To fully utilize this information, the deposited charge must be accurately extracted from the raw digitized waveforms via a robust signal processing chain. Enabled by the ultra-low noise levels associated with cryogenic electronics in the MicroBooNE detector, the precise extraction of ionization charge from the induction wire planes in a single-phase LArTPC is qualitatively demonstrated on MicroBooNE data with event display images, and quantitatively demonstrated via waveform-level and track-level metrics. Improved performance of induction plane calorimetry is demonstrated through the agreement of extracted ionization charge measurements across different wire planes for various event topologies. In addition to the comprehensive waveform-level comparison of data and simulation, a calibration of the cryogenic electronics response is presented and solutions to various MicroBooNE-specific TPC issues are discussed. This work presents an important improvement in LArTPC signal processing, the foundation of reconstruction and therefore physics analyses in MicroBooNE.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Photon detector system timing performance in the DUNE 35-ton prototype liquid argon time projection chamber

Here, the 35-ton prototype for the Deep Underground Neutrino Experiment far detector was a single-phase liquid argon time projection chamber with an integrated photon detector system, all situated inside a membrane cryostat. The detector took cosmic-ray data for six weeks during the period of February 1, 2016 to March 12, 2016. The performance of the photon detection system was checked with these data. An installed photon detector was demonstrated to measure the arrival times of cosmic-ray muons with a resolution better than 32 ns, limited by the timing of the trigger system. A measurement of the timing resolution using closely-spaced calibration pulses yielded a resolution of 15 ns for pulses at a level of 6 photo-electrons. Scintillation light from cosmic-ray muons was observed to be attenuated with increasing distance with a characteristic length of $155 \pm 28$ cm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2018

Early Results from NOAA-20 (JPSS-1) Viirs On-Orbit Calibration and Characterization

Since launch in November 2018, the VIIRS on-board the NOAA-20 (or JPSS-1) satellite has completed its initial intensive on-orbit check-outs and several key calibration and validation activities scheduled to help evaluate sensor at launch performance. This paper provides a brief overview of NOAA-20 VIIRS on-orbit operation and calibration activities, presents early results derived from its on-board calibrators and lunar observations, and discusses potential improvements and future effort to assure sensor data product quality.

calibration↗
DOE OSTI2018

Reduced electronic correlation effects in half substituted Ba(Fe 1-x Co x ) 2 As 2

In this work, we report a comprehensive study of the tridimensional nature and orbital character of the low-energy electronic structure in 50% Cobalt doped Ba(Fe 1-x Co x ) 2 As 2 ( d 6.5 ), by using polarization- and photon energy-dependent angle-resolved photoemission spectroscopy. An extra electron-like Fermi surface is observed around the Brillouin zone boundary compared with isoelectronic K y Fe 2-x Se 2 ( d 6.5 ). The bands near the Fermi level (E F ) are mainly derived from Fe/Co 3 d t 2g orbitals, revealing visible dispersions along the k z direction. In combination with the local density approximation and the dynamical mean-field theory calculations, we find that the As 4 p bands are non-renormalized and the whole 3d band needs to be renormalized by a “single” factor of ~1.6, indicating moderate electronic correlation effects. The “single” factor description of the correlation strength among the different 3 d orbitals is also in sharp contrast to orbital-dependent correlation effects in BaFe 2 As 2 . Our findings indicate a remarkable reduction of correlation effects with little difference among 3 d orbitals in BaFeCoAs 2 , due to the increased filling of the electronic 3 d shell in the presence of significant Hund's coupling. Finally, the results support that the electronic correlation effects and multiple orbital physics play an important role in the superconductivity of the 122 system and in other ferropnictides.

36 MATERIALS SCIENCE↗
DOE OSTI2018

In situ synchrotron X-ray diffraction investigations of the physical mechanism of ultra-low strain hardening in Ti-30Zr-10Nb alloy

A warm-rolled, metastable beta-type Ti-30Zr-10Nb alloy exhibited a peculiar two-stage yielding behavior under uniaxial tensile loading, showing a first plastic stage with obvious strain hardening at 0.4%-10.4% strain and a second plastic stage with ultra-low strain hardening at 10.4%-23.5% strain. In situ high-energy X-ray diffraction (HE-XRD) was used to reveal the stress-induced martensitic transformation scenarios and physical mechanism of the different strain hardening rates. It was found that the deformation-induced phase transformation dominated the onset of the first plastic stage corresponding to the selection of favorable martensitic variants, and their elastic interaction contributed to the obvious strain hardening. HE-XRD experiments further verified that the ultra-low strain hardening rate in the second plastic stage was related to an interesting superelasticity of the martensite, which was characterized by the reversible, stress-induced reorientation of the martensite variants. This reorientation of the martensite variants was primarily due to the rigid lattice rotation of similar to 23 degrees about the [110](α '') axis toward the tensile direction. Here, our investigations provide in-depth understanding of the mechanism of the excellent plasticity with ultra-low strain hardening in beta-type titanium alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Nonstructural proteins nsp2TF and nsp2N of porcine reproductive and respiratory syndrome virus (PRRSV) play important roles in suppressing host innate immune responses

Recently, we identified a unique -2/-1 ribosomal frameshift mechanism in PRRSV, which yields two truncated forms of nonstructural protein (nsp) 2 variants, nsp2TF and nsp2N. Here, in vitro expression of individual PRRSV nsp2TF and nsp2N demonstrated their ability to suppress cellular innate immune responses in transfected cells. Two recombinant viruses were further analyzed, in which either nsp2TF was C-terminally truncated (vKO1) or expression of both nsp2TF and nsp2N was knocked out (vKO2). Host cellular mRNA profiling showed that a panel of cellular immune genes, in particular those involved in innate immunity, was upregulated in cells infected with vKO1 and vKO2. Compared to the wild-type virus, vKO1 and vKO2 expedited the IFN-α response and increased NK cell cytotoxicity, and subsequently enhanced T cell immune responses in infected pigs. Here, our data strongly implicate nsp2TF/nsp2N in arteriviral immune evasion and demonstrate that nsp2TF/nsp2N-deficient PRRSV is less capable of counteracting host innate immune responses.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Measurement of the $τ$ Michel parameters $\bar{\eta}$ and $\xi\kappa$ in the radiative leptonic decay $\tau^- \rightarrow \ell^- \nu_{\tau} \bar{\nu}_{\ell}\gamma$

We present a measurement of the Michel parameters of the τ lepton, η ¯ and ξκ, in the radiative leptonic decay τ - →ℓ - ν τ ν ¯ ℓγ using 711~fb -1 of collision data collected with the Belle detector at the KEKB e + e - collider. The Michel parameters are measured in an unbinned maximum likelihood fit to the kinematic distribution of e + e - →τ + τ - →(π + π 0 ν ¯ τ)(ℓ - ν τ ν ¯ ℓγ) (ℓ=e or μ). The measured values of the Michel parameters are η ¯ =-1.3±1.5±0.8 and ξκ=0.5±0.4±0.2, where the first error is statistical and the second is systematic. This is the first measurement of these parameters. These results are consistent with the Standard Model predictions within their uncertainties and constrain the coupling constants of the generalized weak interaction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2018

An optimized prototype of electromagnetic calorimeter for the SoLID project at Jefferson Lab

A shashlik-type electromagnetic calorimeter will be produced in Hall A of Jefferson Laboratory for the Solenoidal Large Intensity Device (SoLID). Wavelength-shifting (WLS) fibers and clear fibers will be used as the light guide part of the calorimeter. The blue light from scintillators is converted into green light by WLS fibers and is carried out to the back of the calorimeters for readout. Since the magnetic field of SoLID reaches about 1.5 T behind the calorimeters, the design is to use clear fibers to further guide the light out of the solenoid for readout by PMTs. Therefore, it is important to study the perfomance of WLS and clear fibers. This paper describes a comparative test of two different WLS fibers and a light attenuation test for a clear fiber. The results show that the performance of the two WLS fibers is the same under large curvature bending, and that the bending has no effect on the light transmission through the clear fiber. In addition, a comparison test for two fiber end-face reflective materials is also reported. It reveals that the use of silver ink as a reflective material can increase the light yield by 30%. Thereby, an optimized prototype based on the above experimental results was built and the basic performance was tested.

Shen, C.↗